Driver OPEN - M or G | M2 16’ DF D+90TX | 716 MB | Vokey TVD | Putter Open

1356721

Comments

  • drbonesvtdrbonesvt ClubWRX Posts: 8,075 ClubWRX
    switched up putters, I love my kingston, the Roll and feel is phenomenal, but been testing putters with Full Offest, for whatever reason Im more accurate with those. Im right eye dominate, not sure if that has something to do with it.



    Went back to this old guy - learned to play with this putter - few strips of lead tape and new pingman and its been made ready for duty.







    8.5 (9.2*) G400 LST Tensi Pro White 70TX (tipped 1")@44.75" +5gr Hot Melt Toe<br />M1 16' Tour Issue 15.0* (14.2*) Diamana D+ Limited 90tx (Tipped 2.5”) @ 43" |<br />Titleist 2i 18.5* T-MB AD DI 105x (Tipped 2.5”) | Sans 2i R15 5w Fit on Pro 95XX (tipped 2.5”)<br />Titleist MB 716 3-PW (47* PW) Tour Issue X100s (HSx1) <br />54* Wedge Works V grind & 60* Wedge Works M grind - Tour Issue S400 <br />Bettinardi BB8 Trisole or Toulon San Diego <br />All Zcord All the Time <br />all woods & 2i hot melted <br /><br />WITB Link
  • drbonesvtdrbonesvt ClubWRX Posts: 8,075 ClubWRX
    Made some adjustments to the MP4's - Finally got the lengths and swing weights fixed by Mizuno. Worked with my fitter on Trackman to adjust the lie angles, Pretty much went +2* on mizuno standard.



    Got to actually hit them on grass, divots are cleaner and not toe heavy any longer. Though, I need some more practice time with them, my release doesnt feel as crisp.
    8.5 (9.2*) G400 LST Tensi Pro White 70TX (tipped 1")@44.75" +5gr Hot Melt Toe<br />M1 16' Tour Issue 15.0* (14.2*) Diamana D+ Limited 90tx (Tipped 2.5”) @ 43" |<br />Titleist 2i 18.5* T-MB AD DI 105x (Tipped 2.5”) | Sans 2i R15 5w Fit on Pro 95XX (tipped 2.5”)<br />Titleist MB 716 3-PW (47* PW) Tour Issue X100s (HSx1) <br />54* Wedge Works V grind & 60* Wedge Works M grind - Tour Issue S400 <br />Bettinardi BB8 Trisole or Toulon San Diego <br />All Zcord All the Time <br />all woods & 2i hot melted <br /><br />WITB Link
  • drbonesvtdrbonesvt ClubWRX Posts: 8,075 ClubWRX
    8.5 (9.2*) G400 LST Tensi Pro White 70TX (tipped 1")@44.75" +5gr Hot Melt Toe<br />M1 16' Tour Issue 15.0* (14.2*) Diamana D+ Limited 90tx (Tipped 2.5”) @ 43" |<br />Titleist 2i 18.5* T-MB AD DI 105x (Tipped 2.5”) | Sans 2i R15 5w Fit on Pro 95XX (tipped 2.5”)<br />Titleist MB 716 3-PW (47* PW) Tour Issue X100s (HSx1) <br />54* Wedge Works V grind & 60* Wedge Works M grind - Tour Issue S400 <br />Bettinardi BB8 Trisole or Toulon San Diego <br />All Zcord All the Time <br />all woods & 2i hot melted <br /><br />WITB Link
  • drbonesvtdrbonesvt ClubWRX Posts: 8,075 ClubWRX
    Going to have to do a head to head battle with this tour head and the rbz s2 proto 400cc head
    8.5 (9.2*) G400 LST Tensi Pro White 70TX (tipped 1")@44.75" +5gr Hot Melt Toe<br />M1 16' Tour Issue 15.0* (14.2*) Diamana D+ Limited 90tx (Tipped 2.5”) @ 43" |<br />Titleist 2i 18.5* T-MB AD DI 105x (Tipped 2.5”) | Sans 2i R15 5w Fit on Pro 95XX (tipped 2.5”)<br />Titleist MB 716 3-PW (47* PW) Tour Issue X100s (HSx1) <br />54* Wedge Works V grind & 60* Wedge Works M grind - Tour Issue S400 <br />Bettinardi BB8 Trisole or Toulon San Diego <br />All Zcord All the Time <br />all woods & 2i hot melted <br /><br />WITB Link
  • drbonesvtdrbonesvt ClubWRX Posts: 8,075 ClubWRX
    going to try to roll this



    8.5 (9.2*) G400 LST Tensi Pro White 70TX (tipped 1")@44.75" +5gr Hot Melt Toe<br />M1 16' Tour Issue 15.0* (14.2*) Diamana D+ Limited 90tx (Tipped 2.5”) @ 43" |<br />Titleist 2i 18.5* T-MB AD DI 105x (Tipped 2.5”) | Sans 2i R15 5w Fit on Pro 95XX (tipped 2.5”)<br />Titleist MB 716 3-PW (47* PW) Tour Issue X100s (HSx1) <br />54* Wedge Works V grind & 60* Wedge Works M grind - Tour Issue S400 <br />Bettinardi BB8 Trisole or Toulon San Diego <br />All Zcord All the Time <br />all woods & 2i hot melted <br /><br />WITB Link
  • JJK947JJK947 Members Posts: 3,025 ✭✭
    What's the new driver head? 460 cc? Fuel TS out?

    Mizuno ST190 9.5 -
    Mizuno ST190 TS 15 -
    Taylormade P790 UDI - HZRDUS 85 6.5
    Srixon Z945 3-PW - DG Tour AMT X100
    Mizuno MP T7 54.08 - DG Tour X100
    Mizuno MP T7 60.06 - DG Tour S400
    Scotty Cameron Studio Style NP2

  • irsihmen453irsihmen453 Members Posts: 201 ✭✭
    Redwood Anser is amazing. Good luck with it.
    G 9 HC HZRDUS Yellow 6.5
    TS2 S+ 80x
    915f P95x
    919 Tour 4-P KBS Tour 130
    VR Forged 52/56/60 S400
    O Works 3T
  • drbonesvtdrbonesvt ClubWRX Posts: 8,075 ClubWRX
    edited Nov 5, 2014 #69
    JJK947 wrote:


    What's the new driver head? 460 cc? Fuel TS out?




    Fuel is Getting a new Grip on it, I tried midsized for WHATEVER reason, I should know better. Back to the ole std Lamkin Crossline Full Cord



    Im guessing thats a 460 head, actually not 100% sure, I just like the 9.7* loft, 3 open in the std setting, 194 g head, and 58.4 lie angle. Im great with a 2 iron and 3w, but put the freakin ball on an elevated tee, and I go to **** in a hand basket it at times off the box.



    LOVE, just love the feel and performance of my RBZ S2 proto 400cc head, but I am going to try the USGA max and see how that works.



    Going to test the head and shaft combos see what comes out on top.
    Post edited by Unknown User on
    8.5 (9.2*) G400 LST Tensi Pro White 70TX (tipped 1")@44.75" +5gr Hot Melt Toe<br />M1 16' Tour Issue 15.0* (14.2*) Diamana D+ Limited 90tx (Tipped 2.5”) @ 43" |<br />Titleist 2i 18.5* T-MB AD DI 105x (Tipped 2.5”) | Sans 2i R15 5w Fit on Pro 95XX (tipped 2.5”)<br />Titleist MB 716 3-PW (47* PW) Tour Issue X100s (HSx1) <br />54* Wedge Works V grind & 60* Wedge Works M grind - Tour Issue S400 <br />Bettinardi BB8 Trisole or Toulon San Diego <br />All Zcord All the Time <br />all woods & 2i hot melted <br /><br />WITB Link
  • bjno1300bjno1300 Members Posts: 742 ✭✭
    Is that ping a custom ?
  • drbonesvtdrbonesvt ClubWRX Posts: 8,075 ClubWRX
    bjno1300 wrote:


    Is that ping a custom ?




    From what I read it was a rare ping tour issue / WRX piece that made it onto the bay, went for 700 bones. Would love it if they made it retail
    8.5 (9.2*) G400 LST Tensi Pro White 70TX (tipped 1")@44.75" +5gr Hot Melt Toe<br />M1 16' Tour Issue 15.0* (14.2*) Diamana D+ Limited 90tx (Tipped 2.5”) @ 43" |<br />Titleist 2i 18.5* T-MB AD DI 105x (Tipped 2.5”) | Sans 2i R15 5w Fit on Pro 95XX (tipped 2.5”)<br />Titleist MB 716 3-PW (47* PW) Tour Issue X100s (HSx1) <br />54* Wedge Works V grind & 60* Wedge Works M grind - Tour Issue S400 <br />Bettinardi BB8 Trisole or Toulon San Diego <br />All Zcord All the Time <br />all woods & 2i hot melted <br /><br />WITB Link
  • drbonesvtdrbonesvt ClubWRX Posts: 8,075 ClubWRX
    drbonesvt wrote:

    JJK947 wrote:


    What's the new driver head? 460 cc? Fuel TS out?




    Fuel is Getting a new Grip on it, I tried midsized for WHATEVER reason, I should know better. Back to the ole std Lamkin Crossline Full Cord



    Im guessing thats a 460 head, actually not 100% sure, I just like the 9.7* loft, 3 open in the std setting, 194 g head, and 58.4 lie angle. Im great with a 2 iron and 3w, but put the freakin ball on an elevated tee, and I go to **** in a hand basket it at times off the box.



    LOVE, just love the feel and performance of my RBZ S2 proto 400cc head, but I am going to try the USGA max and see how that works.



    Going to test the head and shaft combos see what comes out on top.




    Got this new head on trackman, added about 4-5 grams of hotmelt, small lead strip of tape, head is now 200 g - ish, 44.5 with the AD DI 8x, its swing weight out at D3-4



    Does not sound Tinny anymore, but more solid feel and great sound



    Got about 165 mph BS, 11. 2 launch, 2300-2570 rpm spin, .5 AOA to about +1.5



    had couple 168-169 mph - Much more fogiving than my 400 cc proto Stage 2 head.



    While ive stated I love my proto 400head, for some reason, if you put the ball on an elevated tee, I have trouble with great contact. The 460cc gives that little bit of extra forgiveness at high speed on a 2" peg helps me out.
    8.5 (9.2*) G400 LST Tensi Pro White 70TX (tipped 1")@44.75" +5gr Hot Melt Toe<br />M1 16' Tour Issue 15.0* (14.2*) Diamana D+ Limited 90tx (Tipped 2.5”) @ 43" |<br />Titleist 2i 18.5* T-MB AD DI 105x (Tipped 2.5”) | Sans 2i R15 5w Fit on Pro 95XX (tipped 2.5”)<br />Titleist MB 716 3-PW (47* PW) Tour Issue X100s (HSx1) <br />54* Wedge Works V grind & 60* Wedge Works M grind - Tour Issue S400 <br />Bettinardi BB8 Trisole or Toulon San Diego <br />All Zcord All the Time <br />all woods & 2i hot melted <br /><br />WITB Link
  • tommy89tommy89 Members Posts: 2,554
    cool bag image/smile.png' class='bbc_emoticon' alt=':)' />
    Cobra Amp Cell Pro
    Titleist 913f
    Mizuno MP54
    Vokey 52/56
    Odyssey #7 MXM Versa
    WITB Link
  • drbonesvtdrbonesvt ClubWRX Posts: 8,075 ClubWRX
    tommy89 wrote:


    cool bag image/smile.png' class='bbc_emoticon' alt=':)' />




    Thanks
    8.5 (9.2*) G400 LST Tensi Pro White 70TX (tipped 1")@44.75" +5gr Hot Melt Toe<br />M1 16' Tour Issue 15.0* (14.2*) Diamana D+ Limited 90tx (Tipped 2.5”) @ 43" |<br />Titleist 2i 18.5* T-MB AD DI 105x (Tipped 2.5”) | Sans 2i R15 5w Fit on Pro 95XX (tipped 2.5”)<br />Titleist MB 716 3-PW (47* PW) Tour Issue X100s (HSx1) <br />54* Wedge Works V grind & 60* Wedge Works M grind - Tour Issue S400 <br />Bettinardi BB8 Trisole or Toulon San Diego <br />All Zcord All the Time <br />all woods & 2i hot melted <br /><br />WITB Link
  • MacDaddyMikeMacDaddyMike Play Like A Champion Posts: 489 ✭✭
    Nice bag! I have the same driver on the way. Really excited about the 400cc head.
    Cobra Fly Z+ 10* Aldila ATX Tour Blue 75x
    Taylormade SLDR Mini 14* AD DI 8X
    Titleist 913FD 18* AD DI 8x
    Taylormade UDI 20* or Titleist 913H 21* AD DI 105x
    Ping S55 4-PW Nippon Modus 130s
    Callaway PM (custom sole grind) 53*,60* DG S400
    Byron Morgan DH89
  • drbonesvtdrbonesvt ClubWRX Posts: 8,075 ClubWRX


    Nice bag! I have the same driver on the way. Really excited about the 400cc head.




    Wow, you found a 400 cc Proto head, take it for what its worth, there where only, supposedly , 10 made of the LOFT (#.# )* made. Feels and sounds awesome, thought I am testing some larger heads. Spin and flight are great, your going to like it.
    8.5 (9.2*) G400 LST Tensi Pro White 70TX (tipped 1")@44.75" +5gr Hot Melt Toe<br />M1 16' Tour Issue 15.0* (14.2*) Diamana D+ Limited 90tx (Tipped 2.5”) @ 43" |<br />Titleist 2i 18.5* T-MB AD DI 105x (Tipped 2.5”) | Sans 2i R15 5w Fit on Pro 95XX (tipped 2.5”)<br />Titleist MB 716 3-PW (47* PW) Tour Issue X100s (HSx1) <br />54* Wedge Works V grind & 60* Wedge Works M grind - Tour Issue S400 <br />Bettinardi BB8 Trisole or Toulon San Diego <br />All Zcord All the Time <br />all woods & 2i hot melted <br /><br />WITB Link
  • drbonesvtdrbonesvt ClubWRX Posts: 8,075 ClubWRX
    drbonesvt wrote:


    going to try to roll this







    Extended this putter out to 35.5, really liking it.
    8.5 (9.2*) G400 LST Tensi Pro White 70TX (tipped 1")@44.75" +5gr Hot Melt Toe<br />M1 16' Tour Issue 15.0* (14.2*) Diamana D+ Limited 90tx (Tipped 2.5”) @ 43" |<br />Titleist 2i 18.5* T-MB AD DI 105x (Tipped 2.5”) | Sans 2i R15 5w Fit on Pro 95XX (tipped 2.5”)<br />Titleist MB 716 3-PW (47* PW) Tour Issue X100s (HSx1) <br />54* Wedge Works V grind & 60* Wedge Works M grind - Tour Issue S400 <br />Bettinardi BB8 Trisole or Toulon San Diego <br />All Zcord All the Time <br />all woods & 2i hot melted <br /><br />WITB Link
  • Oliver KlozoffOliver Klozoff Posts: 201 ✭✭
    Nice Mizzis. They are beautiful sticks.



    Did you/do you play golf at VT? I played 1989-93. Program is solid now. Glad to see us top 20 most years! Go Hokies!





    Ping G400
    TM 3HL
    TM Tour Preferred 2i
    Ping i500
    Vokey
    Ping Karsten TR
  • jrshields3jrshields3 Lefty Boomers Posts: 580 ✭✭
    drbonesvt wrote:

    drbonesvt wrote:


    Back when I purchased my MB 712s I bought two test irons, 4 and 6 iron, to play a couple of rounds with as I was fear fully of a full set of blades of blades, moving from mp 63s to mb 712s turned out it was really not that much of a reach. Those two irons test irons, I used to test shafts, lengths, lies, etc. One shaft experiment was a C Taper X , which I hit well and tested nicely , and the numbers where very close to the X100s so I went with the x1s, as I didnt want to pay the upcharge



    In come these new irons, Had tested C Taper X in my MB712 set and again got some good numbers and decided to make the switch - while I loved my MB 712s, the cost to reshaft was great, also building the clubs to reach the D4 swing weight (C Taper Constant weight takes a little more weight in heads to get a higher swing weight), which with mizunos heavy heads made getting to my requested spec easier. The biggest decision to switch was the C Taper Xs ability to execute that that low boring and spin shot. Also, hitting a high fade isnt tremendously difficult to flight with these shafts.




    Got to say after continued play with the C Taper X, whole different animal than the x100's ,



    This might make zero sense, but with the C Taper , I can feel the L in the back swing, I really know where the club is.






    I agree wholeheartedly! I've played both and love that I "feel" the b=club best with the C Tapers
    Titleist TS2, 8.5*/ PX EvenFlow 65 stiff;
    Titleist 915 Fd 13.5*/ PX EvenFlow 75 stiff;
    Titleist 915 F 18*/ PX EvenFlow Blue 85 x stiff;
    Mizuno JPX 919/ Nippon Modus3 120 x stiff;
    Vokey SM6 46*F/TT DG x100;
    Vokey SM6 50*F/ TT DG x100;
    Vokey SM6 54*S/ TT DG s200;
    Vokey Hand ground 58*T/ TT DG s400;
    Scotty Cameron Monterey 35"; Titleist Pro V1x
  • MacDaddyMikeMacDaddyMike Play Like A Champion Posts: 489 ✭✭
    drbonesvt wrote:



    Nice bag! I have the same driver on the way. Really excited about the 400cc head.




    Wow, you found a 400 cc Proto head, take it for what its worth, there where only, supposedly , 10 made of the LOFT (#.# )* made. Feels and sounds awesome, thought I am testing some larger heads. Spin and flight are great, your going to like it.




    That's crazy if they only made 10!! I can't wait to try it. This thread is pretty much the only review I can find on one. I also would love to try a AD DI 8 in it!
    Cobra Fly Z+ 10* Aldila ATX Tour Blue 75x
    Taylormade SLDR Mini 14* AD DI 8X
    Titleist 913FD 18* AD DI 8x
    Taylormade UDI 20* or Titleist 913H 21* AD DI 105x
    Ping S55 4-PW Nippon Modus 130s
    Callaway PM (custom sole grind) 53*,60* DG S400
    Byron Morgan DH89
  • drbonesvtdrbonesvt ClubWRX Posts: 8,075 ClubWRX
    Probably the only more idiotic purchase I could have made was a Hammer X, but I bought a new head only SLDR 8* to experiment with. Had a SLDR 430 9* for a while but hit it well, really well initially then got to where I just absolutely struggled with it. Ive toyed around with stock SLDR 9.5's(FCT to all the way lower) and hit those well on trackman. So here goes my $150 experiment



    Anyone sell just the toe screws and drilled plates?
    8.5 (9.2*) G400 LST Tensi Pro White 70TX (tipped 1")@44.75" +5gr Hot Melt Toe<br />M1 16' Tour Issue 15.0* (14.2*) Diamana D+ Limited 90tx (Tipped 2.5”) @ 43" |<br />Titleist 2i 18.5* T-MB AD DI 105x (Tipped 2.5”) | Sans 2i R15 5w Fit on Pro 95XX (tipped 2.5”)<br />Titleist MB 716 3-PW (47* PW) Tour Issue X100s (HSx1) <br />54* Wedge Works V grind & 60* Wedge Works M grind - Tour Issue S400 <br />Bettinardi BB8 Trisole or Toulon San Diego <br />All Zcord All the Time <br />all woods & 2i hot melted <br /><br />WITB Link
  • drbonesvtdrbonesvt ClubWRX Posts: 8,075 ClubWRX

    drbonesvt wrote:



    Nice bag! I have the same driver on the way. Really excited about the 400cc head.




    Wow, you found a 400 cc Proto head, take it for what its worth, there where only, supposedly , 10 made of the LOFT (#.# )* made. Feels and sounds awesome, thought I am testing some larger heads. Spin and flight are great, your going to like it.




    That's crazy if they only made 10!! I can't wait to try it. This thread is pretty much the only review I can find on one. I also would love to try a AD DI 8 in it!




    Please do let me know how your testing goes
    8.5 (9.2*) G400 LST Tensi Pro White 70TX (tipped 1")@44.75" +5gr Hot Melt Toe<br />M1 16' Tour Issue 15.0* (14.2*) Diamana D+ Limited 90tx (Tipped 2.5”) @ 43" |<br />Titleist 2i 18.5* T-MB AD DI 105x (Tipped 2.5”) | Sans 2i R15 5w Fit on Pro 95XX (tipped 2.5”)<br />Titleist MB 716 3-PW (47* PW) Tour Issue X100s (HSx1) <br />54* Wedge Works V grind & 60* Wedge Works M grind - Tour Issue S400 <br />Bettinardi BB8 Trisole or Toulon San Diego <br />All Zcord All the Time <br />all woods & 2i hot melted <br /><br />WITB Link
  • drbonesvtdrbonesvt ClubWRX Posts: 8,075 ClubWRX
    edited Nov 21, 2014 #83
    jrshields3 wrote:

    drbonesvt wrote:

    drbonesvt wrote:


    Back when I purchased my MB 712s I bought two test irons, 4 and 6 iron, to play a couple of rounds with as I was fear fully of a full set of blades of blades, moving from mp 63s to mb 712s turned out it was really not that much of a reach. Those two irons test irons, I used to test shafts, lengths, lies, etc. One shaft experiment was a C Taper X , which I hit well and tested nicely , and the numbers where very close to the X100s so I went with the x1s, as I didnt want to pay the upcharge



    In come these new irons, Had tested C Taper X in my MB712 set and again got some good numbers and decided to make the switch - while I loved my MB 712s, the cost to reshaft was great, also building the clubs to reach the D4 swing weight (C Taper Constant weight takes a little more weight in heads to get a higher swing weight), which with mizunos heavy heads made getting to my requested spec easier. The biggest decision to switch was the C Taper Xs ability to execute that that low boring and spin shot. Also, hitting a high fade isnt tremendously difficult to flight with these shafts.




    Got to say after continued play with the C Taper X, whole different animal than the x100's ,



    This might make zero sense, but with the C Taper , I can feel the L in the back swing, I really know where the club is.






    I agree wholeheartedly! I've played both and love that I "feel" the b=club best with the C Tapers




    They are hard to describe , but **** to try to get the swing weight right because of the constant weight shaft. Caused me to switch to Mizuno b.c. they have the heavier head options vs Titliest
    8.5 (9.2*) G400 LST Tensi Pro White 70TX (tipped 1")@44.75" +5gr Hot Melt Toe<br />M1 16' Tour Issue 15.0* (14.2*) Diamana D+ Limited 90tx (Tipped 2.5”) @ 43" |<br />Titleist 2i 18.5* T-MB AD DI 105x (Tipped 2.5”) | Sans 2i R15 5w Fit on Pro 95XX (tipped 2.5”)<br />Titleist MB 716 3-PW (47* PW) Tour Issue X100s (HSx1) <br />54* Wedge Works V grind & 60* Wedge Works M grind - Tour Issue S400 <br />Bettinardi BB8 Trisole or Toulon San Diego <br />All Zcord All the Time <br />all woods & 2i hot melted <br /><br />WITB Link
  • drbonesvtdrbonesvt ClubWRX Posts: 8,075 ClubWRX


    Nice Mizzis. They are beautiful sticks.



    Did you/do you play golf at VT? I played 1989-93. Program is solid now. Glad to see us top 20 most years! Go Hokies!




    I was 1998 to 2002 - I am a pittsburgh / Birmingham Al native, ended up in Blacksburgh for college, and I did live in NOVA for a bit after school, but now in Texas.



    Thanks for the bag props



    I wish I had the game for college golf played when I was younger, but was more a football player - a knee and shoulder surgery later, closest i ever got was playing the river course. At the Players Championship my buddies and I did run into Johnson Wagner on the course Friday, he saw we where VT Alumni , and actually spoke with us a bit during his round. He gave us some VT swag out of his bag, his caddie and him could not have been nicer.
    8.5 (9.2*) G400 LST Tensi Pro White 70TX (tipped 1")@44.75" +5gr Hot Melt Toe<br />M1 16' Tour Issue 15.0* (14.2*) Diamana D+ Limited 90tx (Tipped 2.5”) @ 43" |<br />Titleist 2i 18.5* T-MB AD DI 105x (Tipped 2.5”) | Sans 2i R15 5w Fit on Pro 95XX (tipped 2.5”)<br />Titleist MB 716 3-PW (47* PW) Tour Issue X100s (HSx1) <br />54* Wedge Works V grind & 60* Wedge Works M grind - Tour Issue S400 <br />Bettinardi BB8 Trisole or Toulon San Diego <br />All Zcord All the Time <br />all woods & 2i hot melted <br /><br />WITB Link
  • drbonesvtdrbonesvt ClubWRX Posts: 8,075 ClubWRX
    8.5 (9.2*) G400 LST Tensi Pro White 70TX (tipped 1")@44.75" +5gr Hot Melt Toe<br />M1 16' Tour Issue 15.0* (14.2*) Diamana D+ Limited 90tx (Tipped 2.5”) @ 43" |<br />Titleist 2i 18.5* T-MB AD DI 105x (Tipped 2.5”) | Sans 2i R15 5w Fit on Pro 95XX (tipped 2.5”)<br />Titleist MB 716 3-PW (47* PW) Tour Issue X100s (HSx1) <br />54* Wedge Works V grind & 60* Wedge Works M grind - Tour Issue S400 <br />Bettinardi BB8 Trisole or Toulon San Diego <br />All Zcord All the Time <br />all woods & 2i hot melted <br /><br />WITB Link
  • drbonesvtdrbonesvt ClubWRX Posts: 8,075 ClubWRX
    Thanks to Matthew at Mizuno USA for getting these irons just right, the initial set was a bit off spec, but reviewing and measuring the specs with my club builder they are spot on now



    8.5 (9.2*) G400 LST Tensi Pro White 70TX (tipped 1")@44.75" +5gr Hot Melt Toe<br />M1 16' Tour Issue 15.0* (14.2*) Diamana D+ Limited 90tx (Tipped 2.5”) @ 43" |<br />Titleist 2i 18.5* T-MB AD DI 105x (Tipped 2.5”) | Sans 2i R15 5w Fit on Pro 95XX (tipped 2.5”)<br />Titleist MB 716 3-PW (47* PW) Tour Issue X100s (HSx1) <br />54* Wedge Works V grind & 60* Wedge Works M grind - Tour Issue S400 <br />Bettinardi BB8 Trisole or Toulon San Diego <br />All Zcord All the Time <br />all woods & 2i hot melted <br /><br />WITB Link
  • drbonesvtdrbonesvt ClubWRX Posts: 8,075 ClubWRX
    edited Nov 23, 2014 #87
    8.5 (9.2*) G400 LST Tensi Pro White 70TX (tipped 1")@44.75" +5gr Hot Melt Toe<br />M1 16' Tour Issue 15.0* (14.2*) Diamana D+ Limited 90tx (Tipped 2.5”) @ 43" |<br />Titleist 2i 18.5* T-MB AD DI 105x (Tipped 2.5”) | Sans 2i R15 5w Fit on Pro 95XX (tipped 2.5”)<br />Titleist MB 716 3-PW (47* PW) Tour Issue X100s (HSx1) <br />54* Wedge Works V grind & 60* Wedge Works M grind - Tour Issue S400 <br />Bettinardi BB8 Trisole or Toulon San Diego <br />All Zcord All the Time <br />all woods & 2i hot melted <br /><br />WITB Link
  • drbonesvtdrbonesvt ClubWRX Posts: 8,075 ClubWRX
    drbonesvt wrote:






    Trimmed weight, removed the toe cover, drilled the hole, adding 10 grams of hot melt to the rear of the club



    Just hitting it with lead tape, sliding weight removed, got some half way decent results , and the club was at C7-8 ish swing weight with just the lead tape.



    8* head opened to 1.5* or at least thats what it says



    La 10-12* @ 112 mph AOA -1 to -0.5 (need to work on that), using the lower loft I actually was swinging the club faster and at less of a downward angle of attack. spin was around 2900-2800



    8.5 (9.2*) G400 LST Tensi Pro White 70TX (tipped 1")@44.75" +5gr Hot Melt Toe<br />M1 16' Tour Issue 15.0* (14.2*) Diamana D+ Limited 90tx (Tipped 2.5”) @ 43" |<br />Titleist 2i 18.5* T-MB AD DI 105x (Tipped 2.5”) | Sans 2i R15 5w Fit on Pro 95XX (tipped 2.5”)<br />Titleist MB 716 3-PW (47* PW) Tour Issue X100s (HSx1) <br />54* Wedge Works V grind & 60* Wedge Works M grind - Tour Issue S400 <br />Bettinardi BB8 Trisole or Toulon San Diego <br />All Zcord All the Time <br />all woods & 2i hot melted <br /><br />WITB Link
  • drbonesvtdrbonesvt ClubWRX Posts: 8,075 ClubWRX
    edited Nov 25, 2014 #89
    8.5 (9.2*) G400 LST Tensi Pro White 70TX (tipped 1")@44.75" +5gr Hot Melt Toe<br />M1 16' Tour Issue 15.0* (14.2*) Diamana D+ Limited 90tx (Tipped 2.5”) @ 43" |<br />Titleist 2i 18.5* T-MB AD DI 105x (Tipped 2.5”) | Sans 2i R15 5w Fit on Pro 95XX (tipped 2.5”)<br />Titleist MB 716 3-PW (47* PW) Tour Issue X100s (HSx1) <br />54* Wedge Works V grind & 60* Wedge Works M grind - Tour Issue S400 <br />Bettinardi BB8 Trisole or Toulon San Diego <br />All Zcord All the Time <br />all woods & 2i hot melted <br /><br />WITB Link
  • drbonesvtdrbonesvt ClubWRX Posts: 8,075 ClubWRX
    edited Nov 26, 2014 #90
    Enter "The Death Star"



    210 g head weight - 10g hotmelt - place at the back of the head

    346g total club weight @ 44.5"



    Feels amazing, strong launch for an 8* head opened up 1.5*



    More testing required and the ultimate gauge; how many fairways



    8.5 (9.2*) G400 LST Tensi Pro White 70TX (tipped 1")@44.75" +5gr Hot Melt Toe<br />M1 16' Tour Issue 15.0* (14.2*) Diamana D+ Limited 90tx (Tipped 2.5”) @ 43" |<br />Titleist 2i 18.5* T-MB AD DI 105x (Tipped 2.5”) | Sans 2i R15 5w Fit on Pro 95XX (tipped 2.5”)<br />Titleist MB 716 3-PW (47* PW) Tour Issue X100s (HSx1) <br />54* Wedge Works V grind & 60* Wedge Works M grind - Tour Issue S400 <br />Bettinardi BB8 Trisole or Toulon San Diego <br />All Zcord All the Time <br />all woods & 2i hot melted <br /><br />WITB Link
  • tommy89tommy89 Members Posts: 2,554
    Those irons look perfect!
    Cobra Amp Cell Pro
    Titleist 913f
    Mizuno MP54
    Vokey 52/56
    Odyssey #7 MXM Versa
    WITB Link
Sign In or Register to comment.