ForTourUseOnly WITB

24567

Comments

  • ForTourUseOnlyForTourUseOnly 009M SSS WeldNeck Members Posts: 1,046 ✭✭
    joker21 wrote:


    How do you like the 915h 18* hybrid? Trying to decide if I should get one.




    Not sure what I am going to do hybrid wise yet. I was fit for the 915H 18. Was better for me than the HD. But I still don't like the look of either of the new hybrids. Since it's snowing now here I won't be able to do much testing for a while but I'm sure one of them will make it into my bag by next year.
    Titleist TS3 8.5 w/ Mitsubishi Tensei CK Pro Orange 70 TX
    Titleist TS3 15, 18 w/ Mitsubishi Tensei CK Pro Orange 80/90 TX
    Titleist 718T-MB 2i, 716T-MB 4i, Forged 718MB 5i-9i w/ Project X 6.5
    Vokey BV HandGround SM7 Raw 46.10F, 50.12F, 54.10S (55°), 60.08M
    Scotty Cameron Masterful 009M SSS Weld Neck A040584
    WITB LINK New Pics 12/09/2018
  • ArchitectArchitect Members Posts: 899
    What a bag!!!!
    Ping G30 10.5 Driver Tour 80 75g S
    Ping G30 5-wood TFC 419F 57g S
    Ping i25 3-UW irons KBS Tour S
    Ping Gorge 54SS, 58SS KBS Tour S
    Ping Scottsdale TR Craz-E, ProV1X
    WITB Link
  • mackepamackepa #TheWRX Members Posts: 3,586 ✭✭
    I just ordered another set of vokey from wedgeworks. I went with the black ion this time. How does the finish wear?
    #TheWRX 12/11/16
    Epic Flash SZ 9* AD IZ 6
    Epic Flash SZ 15* AD IZ 8
    Apex 20* AD IZ 85
    Apex Pro 19 4-PW KBS Proto
    MD4 52s, 56s, 60x KBS $-Taper
    Toulon Austin Longneck Garage
    Jones Utility Rover
    Chromesoft X
  • CV59CV59 Members Posts: 16

    joker21 wrote:


    How do you like the 915h 18* hybrid? Trying to decide if I should get one.




    Not sure what I am going to do hybrid wise yet. I was fit for the 915H 18. Was better for me than the HD. But I still don't like the look of either of the new hybrids. Since it's snowing now here I won't be able to do much testing for a while but I'm sure one of them will make it into my bag by next year.








    My set up is almost identical to yours. nicely done.
  • TheKrushhTheKrushh Members Posts: 1,014 ✭✭
    I can't believe no one has commented on this yet. 6.75 loft in the driver?!?!?!?! That's nuts, I would have a hard time putting with that!
    Ping G400Max 10.5 ADGP 7X
    Taylormade R15 17 Speeder 7X
    Srixon U85 3,4 Nippon NSPro 1050s
    Srixon 785 5-PW Nippon NSPro 1050s
    Cleveland RTX-4 Tour Raw 50,55,61 Nippon NSPro 1050s
    Scotty Cameron Futura 5W 34.5
  • thatboygaulethatboygaule IG- RichardGaule Jr. Boomers Posts: 1,637
    Up there as one of the best bags on here
    [font=arial,helvetica,sans-serif]Titleist 913D2 8.75* w/ Diamana Blue S[/font]
    [font=arial,helvetica,sans-serif]Titleist 913F 16.5* w/ Diamana Blue S[/font]
    [font=arial,helvetica,sans-serif]Ping Anser 20* w/ TCF 800 s[/font]
    [font=arial,helvetica,sans-serif]Titleist 716 T-MB 3 Iron w/ KBS C TAPER LITE X
    Mizuno MP5 4-PW w/ KBS C TAPER LITE X
    Titleist SM6 52* KBS TOUR 90 S
    Titleist SM6 58* STOCK
    Odyssey #7[/font]
  • ForTourUseOnlyForTourUseOnly 009M SSS WeldNeck Members Posts: 1,046 ✭✭
    They wear pretty bad. Really need to get some raw wedges back in my bag b
    Titleist TS3 8.5 w/ Mitsubishi Tensei CK Pro Orange 70 TX
    Titleist TS3 15, 18 w/ Mitsubishi Tensei CK Pro Orange 80/90 TX
    Titleist 718T-MB 2i, 716T-MB 4i, Forged 718MB 5i-9i w/ Project X 6.5
    Vokey BV HandGround SM7 Raw 46.10F, 50.12F, 54.10S (55°), 60.08M
    Scotty Cameron Masterful 009M SSS Weld Neck A040584
    WITB LINK New Pics 12/09/2018
  • ForTourUseOnlyForTourUseOnly 009M SSS WeldNeck Members Posts: 1,046 ✭✭
    Once I get my new 915 stuff built up and a nice day out I'll take some good pics.
    Titleist TS3 8.5 w/ Mitsubishi Tensei CK Pro Orange 70 TX
    Titleist TS3 15, 18 w/ Mitsubishi Tensei CK Pro Orange 80/90 TX
    Titleist 718T-MB 2i, 716T-MB 4i, Forged 718MB 5i-9i w/ Project X 6.5
    Vokey BV HandGround SM7 Raw 46.10F, 50.12F, 54.10S (55°), 60.08M
    Scotty Cameron Masterful 009M SSS Weld Neck A040584
    WITB LINK New Pics 12/09/2018
  • ForTourUseOnlyForTourUseOnly 009M SSS WeldNeck Members Posts: 1,046 ✭✭
    Did some more testing, looks like the 915Hd 20.5 will make the bag rather than the 915H
    Titleist TS3 8.5 w/ Mitsubishi Tensei CK Pro Orange 70 TX
    Titleist TS3 15, 18 w/ Mitsubishi Tensei CK Pro Orange 80/90 TX
    Titleist 718T-MB 2i, 716T-MB 4i, Forged 718MB 5i-9i w/ Project X 6.5
    Vokey BV HandGround SM7 Raw 46.10F, 50.12F, 54.10S (55°), 60.08M
    Scotty Cameron Masterful 009M SSS Weld Neck A040584
    WITB LINK New Pics 12/09/2018
  • NFG12NFG12 Banned Posts: 43
    What spin rates was the 6.75 loft producing in the driver?
  • peakpositionpeakposition Members Posts: 550
    Stunning! Very impressive
    TaylorMade M2 2016, 8.0* UST ATTAS GoGo 5 6X
    TaylorMade SLDR 14.3* UST Chrome 8FT5
    Mizuno MP Fli-Hi 18* Speeder TS HB 9.8X
    Srixon Z 765 4-PW Nippon Modus3 Tour 105 S
    Titleist SM6 50F, 56M, 60K Kuro Kage TiNi LBP 105TX
    Evnroll ER2

    WITB Link
  • Aces-6Aces-6 Marshals, BST Volunteer Mods Posts: 3,030
    That's some serious weaponry right there.
    PXG 0811X 9* Tour AD GP 7s
    PXG 0341 15* Tour AD GT 8s
    PXG 0317 19* Tensei Pro Blue 80s
    PXG 0311XF 4 Steelfiber i110s
    PXG 0311 5-GW Steelfiber i110s
    PXG 0311 54/60 Steelfiber i110s
    PXG Dagger 34"
    TM TP 5x
  • BulgerGolfBulgerGolf Members Posts: 19
    That's awesome man, stop making me jealous already!
  • ForTourUseOnlyForTourUseOnly 009M SSS WeldNeck Members Posts: 1,046 ✭✭
    NFG12 wrote:


    What spin rates was the 6.75 loft producing in the driver?




    I spin it between 2300-2600 on average. I've played drivers for a long time to help keep that down. Took me a long time to find a driver to spin under 3000rpm which is why I've played 7.5 drivers or less for the last 5 years.
    Titleist TS3 8.5 w/ Mitsubishi Tensei CK Pro Orange 70 TX
    Titleist TS3 15, 18 w/ Mitsubishi Tensei CK Pro Orange 80/90 TX
    Titleist 718T-MB 2i, 716T-MB 4i, Forged 718MB 5i-9i w/ Project X 6.5
    Vokey BV HandGround SM7 Raw 46.10F, 50.12F, 54.10S (55°), 60.08M
    Scotty Cameron Masterful 009M SSS Weld Neck A040584
    WITB LINK New Pics 12/09/2018
  • ForTourUseOnlyForTourUseOnly 009M SSS WeldNeck Members Posts: 1,046 ✭✭
    bjno1300 wrote:


    How did you like the strong lofted FD compared to the strong F and the 15 FD and f?




    Same as the post above I used to struggle with fairway woods until I found out that I needed to go to a lower loft. I launch the ball fairly high with a bunch of spin so the normal F and 15* models don't work as well for me. Although this years 915F 13.5 would have been my next choice.
    Titleist TS3 8.5 w/ Mitsubishi Tensei CK Pro Orange 70 TX
    Titleist TS3 15, 18 w/ Mitsubishi Tensei CK Pro Orange 80/90 TX
    Titleist 718T-MB 2i, 716T-MB 4i, Forged 718MB 5i-9i w/ Project X 6.5
    Vokey BV HandGround SM7 Raw 46.10F, 50.12F, 54.10S (55°), 60.08M
    Scotty Cameron Masterful 009M SSS Weld Neck A040584
    WITB LINK New Pics 12/09/2018
  • ForTourUseOnlyForTourUseOnly 009M SSS WeldNeck Members Posts: 1,046 ✭✭
    edited Jan 12, 2015 #47
    Updated again, hybrid is still a funny club for me. Testing out the 17.5 HD at a 3hybrid length to help reduce the peak height and the spin



    Also some new exciting stuff comig in a month for the shorter sticks in the bag.
    Titleist TS3 8.5 w/ Mitsubishi Tensei CK Pro Orange 70 TX
    Titleist TS3 15, 18 w/ Mitsubishi Tensei CK Pro Orange 80/90 TX
    Titleist 718T-MB 2i, 716T-MB 4i, Forged 718MB 5i-9i w/ Project X 6.5
    Vokey BV HandGround SM7 Raw 46.10F, 50.12F, 54.10S (55°), 60.08M
    Scotty Cameron Masterful 009M SSS Weld Neck A040584
    WITB LINK New Pics 12/09/2018
  • Tee2Green85Tee2Green85 Members Posts: 790
    edited Jan 12, 2015 #48
    looks just like mine, except I game the full set of mb's.... nice bag dude!
    TM M1 460 9.5* Matrix BT 6M3 X
    TM M1 15* Aldila Rogue Black X
    Cobra King Pro MB 2-Pw C-taper 130 X
    Callaway MD3 52* S Grind
    Callaway MD3 58* S Grind
    Odyssey MXM Versa #1
  • drbonesvtdrbonesvt ClubWRX Posts: 8,076 ClubWRX
    edited Feb 3, 2015 #49


    Updated with what's going to be in the bag for 2015 for 915 product and shafts. Hybrid is still up in the air.




    Solid solid player setr up



    Might I inquire where you got the heads digitally lofted? Measured in the A1 position? the 915 driver 6.7* actualy vs printed 7.5* on the club head, or is that a d1 open position?



    How has your Titleist heads played against some of the other new stuff?



    *That putter is a hands down one spectacular flat stick*
    8.5 (9.2*) G400 LST Tensi Pro White 70TX (tipped 1")@44.75" +5gr Hot Melt Toe<br />M1 16' Tour Issue 15.0* (14.2*) Diamana D+ Limited 90tx (Tipped 2.5”) @ 43" |<br />Titleist 2i 18.5* T-MB AD DI 105x (Tipped 2.5”) | Sans 2i R15 5w Fit on Pro 95XX (tipped 2.5”)<br />Titleist MB 716 3-PW (47* PW) Tour Issue X100s (HSx1) <br />54* Wedge Works V grind & 60* Wedge Works M grind - Tour Issue S400 <br />Bettinardi BB8 Trisole or Toulon San Diego <br />All Zcord All the Time <br />all woods & 2i hot melted <br /><br />WITB Link
  • mixxedbagmixxedbag Members Posts: 478 ✭✭
    Nice bag as usual dude, think I played with you a few years ago in an Am qualifier at Brantford. I too am not super impressed with the heads on both 915 hybrids this year.
    2017 Bag
    TaylorMade M1 2017 460 9.5 Rogue Silver 70X/Callaway Epic SubZero 10.5/Titleist 917D3
    TaylorMade M1 2017 15 Graphite Design DI-8X/Callaway Epic SubZero 15/Titleist 917F3
    TaylorMade M1 2017 19 Graphite Design BB-8X
    Mizuno MP-5 4-PW Project X 6.5/Srixon Z965 4-PW Project X LZ 6.5/Titleist 716 MB 4-Pw Dynamic Gold AMT X100
    Titleist Vokey SM6 50F, 54S, 58K
    Odyssey O-Works 1 Wide 34"/Scotty Cameron Select Newport 2.5/Scotty Cameron GoLo 7
  • ForTourUseOnlyForTourUseOnly 009M SSS WeldNeck Members Posts: 1,046 ✭✭
    drbonesvt wrote:



    Updated with what's going to be in the bag for 2015 for 915 product and shafts. Hybrid is still up in the air.




    Solid solid player setr up



    Might I inquire where you got the heads digitally lofted? Measured in the A1 position? the 915 driver 6.7* actualy vs printed 7.5* on the club head, or is that a d1 open position?



    How has your Titleist heads played against some of the other new stuff?



    *That putter is a hands down one spectacular flat stick*




    I have access to a digital loft and lie machine for woods and irons but yes it is in the C1 position. So is the Hybrid. And my 3 wood is at A1.
    Titleist TS3 8.5 w/ Mitsubishi Tensei CK Pro Orange 70 TX
    Titleist TS3 15, 18 w/ Mitsubishi Tensei CK Pro Orange 80/90 TX
    Titleist 718T-MB 2i, 716T-MB 4i, Forged 718MB 5i-9i w/ Project X 6.5
    Vokey BV HandGround SM7 Raw 46.10F, 50.12F, 54.10S (55°), 60.08M
    Scotty Cameron Masterful 009M SSS Weld Neck A040584
    WITB LINK New Pics 12/09/2018
  • drbonesvtdrbonesvt ClubWRX Posts: 8,076 ClubWRX

    drbonesvt wrote:



    Updated with what's going to be in the bag for 2015 for 915 product and shafts. Hybrid is still up in the air.




    Solid solid player setr up



    Might I inquire where you got the heads digitally lofted? Measured in the A1 position? the 915 driver 6.7* actualy vs printed 7.5* on the club head, or is that a d1 open position?



    How has your Titleist heads played against some of the other new stuff?



    *That putter is a hands down one spectacular flat stick*




    I have access to a digital loft and lie machine for woods and irons but yes it is in the C1 position. So is the Hybrid. And my 3 wood is at A1.




    Very cool, love the bag,
    8.5 (9.2*) G400 LST Tensi Pro White 70TX (tipped 1")@44.75" +5gr Hot Melt Toe<br />M1 16' Tour Issue 15.0* (14.2*) Diamana D+ Limited 90tx (Tipped 2.5”) @ 43" |<br />Titleist 2i 18.5* T-MB AD DI 105x (Tipped 2.5”) | Sans 2i R15 5w Fit on Pro 95XX (tipped 2.5”)<br />Titleist MB 716 3-PW (47* PW) Tour Issue X100s (HSx1) <br />54* Wedge Works V grind & 60* Wedge Works M grind - Tour Issue S400 <br />Bettinardi BB8 Trisole or Toulon San Diego <br />All Zcord All the Time <br />all woods & 2i hot melted <br /><br />WITB Link
  • Twan2282Twan2282 Members Posts: 19
    Might be one of the sickest bags I've ever seen! Really nice set up. Looking to do the same thing this year except with AP2s and minus the 009!
  • ForTourUseOnlyForTourUseOnly 009M SSS WeldNeck Members Posts: 1,046 ✭✭
    Had the opportunity to Get fit by Bob Vokey last week and was also fit at the Scotty Cameron Gallery, have a few things coming in the next month or 2 that will make it in the bag.



    Stay tuned
    Titleist TS3 8.5 w/ Mitsubishi Tensei CK Pro Orange 70 TX
    Titleist TS3 15, 18 w/ Mitsubishi Tensei CK Pro Orange 80/90 TX
    Titleist 718T-MB 2i, 716T-MB 4i, Forged 718MB 5i-9i w/ Project X 6.5
    Vokey BV HandGround SM7 Raw 46.10F, 50.12F, 54.10S (55°), 60.08M
    Scotty Cameron Masterful 009M SSS Weld Neck A040584
    WITB LINK New Pics 12/09/2018
  • GC70GC70 What's Next? ClubWRX Posts: 7,508 ✭✭


    Had the opportunity to Get fit by Bob Vokey last week and was also fit at the Scotty Cameron Gallery, have a few things coming in the next month or 2 that will make it in the bag.



    Stay tuned


    ****, that sounds like a expensive but fun experience.
    Cobra F9 8* Atmos Blue 6S
    XR Steelhead 15* Atmos Red 7S
    818 H1 Atmos Blue 8S
    Apex CF19 4-AW C-Taper Lite
    SM7's RAW 50F - 54S - 58M
    Nike 006 Paul Casey Proto (Oven)
    Nike 006 Rory Proto (Oven)
    Pro V1x / CSX

    WITB Link
  • jmingjming Members Posts: 677 ✭✭
    Had the opportunity to Get fit by Bob Vokey last week and was also fit at the Scotty Cameron Gallery, have a few things coming in the next month or 2 that will make it in the bag.



    Stay tuned




    Oh man you need to give us a review of the session with Mr vokey! This is on my to do list if I ever have the chance.
  • drbonesvtdrbonesvt ClubWRX Posts: 8,076 ClubWRX


    Had the opportunity to Get fit by Bob Vokey last week and was also fit at the Scotty Cameron Gallery, have a few things coming in the next month or 2 that will make it in the bag.



    Stay tuned






    Very cool, probably should have taken the Tiger with you, he could use some new wedges
    8.5 (9.2*) G400 LST Tensi Pro White 70TX (tipped 1")@44.75" +5gr Hot Melt Toe<br />M1 16' Tour Issue 15.0* (14.2*) Diamana D+ Limited 90tx (Tipped 2.5”) @ 43" |<br />Titleist 2i 18.5* T-MB AD DI 105x (Tipped 2.5”) | Sans 2i R15 5w Fit on Pro 95XX (tipped 2.5”)<br />Titleist MB 716 3-PW (47* PW) Tour Issue X100s (HSx1) <br />54* Wedge Works V grind & 60* Wedge Works M grind - Tour Issue S400 <br />Bettinardi BB8 Trisole or Toulon San Diego <br />All Zcord All the Time <br />all woods & 2i hot melted <br /><br />WITB Link
  • ForTourUseOnlyForTourUseOnly 009M SSS WeldNeck Members Posts: 1,046 ✭✭
    So I went up to Oceanside TPI Facility to spend 3-3.5 hours with Bob Vokey working on wedges. We first started inside where Dino gave me a tour of the facility. Then we went over to the workshop area where Bob and I talked a little about my game, the different wedges I have played, the different types of grinds he does and some of what some tour players are using. At this time Dino took my wedges and 9 iron and spec'd them out. Once we talked for a bit about all stuff Vokey and Canada, we jumped in a cart and drove to the back of the range. We first started hitting shots with my 9 iron and PW to get some yardage gaps. Then we did some work with my current TVD 50 and I told Voke I wasn't happy with it as I didn't like the grind on it and didn't think I really needed a grind. I also told him I really liked the older 200 shape. We then hit some different bounce 50's and determined the 12 was the best and he's going to grind the profile to look like a 200 series. Then we moved on to the sand and lob with fuller swings. Found that 50-55-60 was the right gapping for yardages for me and a 46* was actually quite a good fit for me. We hit sole 3/4 to fuller shots and narrowed down the 55 to a tvd M and a 54.14 bent to 55. We also narrowed down the 60 to 3 wedges. A 60.07 S, a Hand Ground V grind and a M grind with a pro groove. We found that making the lie angle 1* more upright from my normal 2*'flat helped a lot as well. From there we went to hit pitch shots from 30-50 yards over a bunker and then some different spots around the green including 2 different bunkers some uphill short sided lies and some of my hardest spot the basic 50 yard pitch shot. From the pitch shots we found the 55* wedges were about equal and the M Grind and V grind 60's were the best. From the bunker the 55TVD was better and the 60.07 S and the 60M was the best. From the short sided shot the 60 S was the best. With the 60M being s close second. Then from my struggle distance 40-50 yards the TVD55 was the best. We determined the best wedges for my bag were the 54TVD bent to 55 and the 60M Hand Ground with a Pro Groove as around the greens and especially in the bunker it performed the best all around. Bunkers are the best part of my short game. After we went back and discussed shafts, grips, stamping, different cosmetic grinds like the thin top line I added to the 60M. My 46/50 SM5 will both have a 200 series toe profile grind applied to them. The TVD55 will have the older TVD profile, so not as round ground into it. And the 60M will have a thinner Topline and a pro groove grind. Overall such a great process and totally worth the price. Voke will now take the specs and notes and hand grind the 4 raw tour wedges for me and ship them to me in the next few weeks. Can't wait to get them. Will post pics when I can.
    Titleist TS3 8.5 w/ Mitsubishi Tensei CK Pro Orange 70 TX
    Titleist TS3 15, 18 w/ Mitsubishi Tensei CK Pro Orange 80/90 TX
    Titleist 718T-MB 2i, 716T-MB 4i, Forged 718MB 5i-9i w/ Project X 6.5
    Vokey BV HandGround SM7 Raw 46.10F, 50.12F, 54.10S (55°), 60.08M
    Scotty Cameron Masterful 009M SSS Weld Neck A040584
    WITB LINK New Pics 12/09/2018
  • KPH808KPH808 Participation Trophy ClubWRX Posts: 2,634 ClubWRX
    Sounds like an awesome experience. How was the putter fitting?
    [font=arial,helvetica,sans-serif][font=times new roman,times,serif]Ping G400 LST 8.5* w/ Tensei Pro White 70 TX
    TM '17 M2 15* w/ Kurokage Dual Core 80 TX
    TM P790 UDI 2 w/ KBS Tour 130x
    Titleist 718 CB w/ KBS $ Taper 130x
    Fourteen Raw RM 22 50, 54, 58 w/ KBS 610 Tour Black Nickel
    Scotty Cameron Circle T Futura 6M
    [/font]
    [/font]
  • ForTourUseOnlyForTourUseOnly 009M SSS WeldNeck Members Posts: 1,046 ✭✭
    Putter fitting was good too, learned a lot about my stroke and what I need to do, also learned that I am better with sight dots over sight lines, and a little toe flow doesnt hurt but a plumbers neck works well too. We changed the loft on my 009 slightly and it seems to be very good for me. Although thats not stopping me from looking at some new puitters
    Titleist TS3 8.5 w/ Mitsubishi Tensei CK Pro Orange 70 TX
    Titleist TS3 15, 18 w/ Mitsubishi Tensei CK Pro Orange 80/90 TX
    Titleist 718T-MB 2i, 716T-MB 4i, Forged 718MB 5i-9i w/ Project X 6.5
    Vokey BV HandGround SM7 Raw 46.10F, 50.12F, 54.10S (55°), 60.08M
    Scotty Cameron Masterful 009M SSS Weld Neck A040584
    WITB LINK New Pics 12/09/2018
  • jmingjming Members Posts: 677 ✭✭


    Putter fitting was good too, learned a lot about my stroke and what I need to do, also learned that I am better with sight dots over sight lines, and a little toe flow doesnt hurt but a plumbers neck works well too. We changed the loft on my 009 slightly and it seems to be very good for me. Although thats not stopping me from looking at some new puitters




    Did you use a SAM PuttLab for the putter fitting? What was the difference btw sight dot and sight line for you? I've always wondered about that.
Sign In or Register to comment.