jll62's WITB - End of 2018

jll62jll62 ClubWRX Posts: 2,028 ClubWRX
October 2018 - End of 2018 bag



Here's what I had in play during what was likely my last round of 2018. Unless I play again in 2018, this is probably the baseline against which all 2019 changes will be made. The bag stayed very consistent throughout the year, with only some minor dabbling into different driver shafts and also a few 3-woods. I did try P730 short irons (with Modus 120) and a set of P750 (with DGX100 soft-stepped), but neither club was able to kick the RSi TP out of the bag.



Looking forward to 2019, I'm eager to try the P760. But I'm also planning to rebuild my P750 with C-Tapers and give those a shot at the bag also.



Driver

*** UPDATE: Testing an M3 9.5 with the same shaft as the M2. Detailed pics soon, but can be seen in the full bag pic. ***



TaylorMade 2017 M2 9.5 degree, Graphite Design Tour AD GP-6s (44.75", tipped 0.5"). Another great driving year with this combo. Tried multiple shafts in the spring, but kept coming back to the GP.



3-wood

*** UPDATE: Testing an M3 T3 with a Purple Ice. Detailed pics soon, but can be seen in the full bag pic. ***



TaylorMade V-Steel 13 degree, GD Purple Ice 85-X (1.5" tipping). After playing 2017 with an M2 deep face T3 13, I'm back to the venerable V-Steel for now. It's the best combination of tee and turf performance I've ever gotten from a fairway wood. The Purple Ice remains the best fairway wood shaft I've ever used. It's tipped 1.5" because it was originally made with bore thru driver heads in mind, so the tip section is pretty soft.



Utility/Hybrid

TaylorMade Tour Preferred UDI 2 (18), KBS C-Taper lite X. This has become one of my favorite clubs in the bag. A lot of the tournament courses on which I play require precise 230-240 shots off the tee and I don't like hitting hybrid from the teeing ground. Looking forward to demoing the P790 UDI 2, but I don't know if it will be enough to knock the OG UDI out of the bag. Fun fitting note on this one. I originally picked it up with a C-Taper lite in S, but I had a hard time keeping it from going left. My fitter added a few strips of lead tape onto the shaft to see if 5g of extra weight removed the left miss. It worked like a charm, so we replaced the C-Taper lite S (110g) with a C-Taper lite X (115g).



If course setup doesn't indicate a need for the UDI, I'll often replace it with a RBZ Stage 2 Tour 3 hybrid, with Diamana S+ 82HY X. I like the shape of this hybrid more than most on the market, so there's no need to change something that is only in the bag 10% of the time.



Irons

TaylorMade P770 3-4

TaylorMade RSi TP 5-PW.



The 3 and 4 irons have KBS C-Taper S, while the 5-PW all have KBS C-Taper S+. The entire set is MOI matched. This is my 4th season with the RSi TP head. The first two were with KBS Tour S, but after an extensive shaft fitting in November 2016, I ended up in an MOI matched build with C-Taper S+ for 2017. New for 2018 are C-Taper S in the 3 and 4 irons because I felt the S+ was just a bit too stiff and I had trouble elevating the longer irons. The S flex has remedied that issue nicely.



Wedges

TaylorMade Milled Grind Raw 52, DGS400 (tour issue)

TaylorMade Milled Grind Hi-Toe 60 (bent to 58), DGS400 (tour issue)



I'm back to a 3 wedge system (45-52-58) in 2018 after two seasons with 4 wedges (45-50-54-59). On paper, the gapping with the four wedge system is far superior, but my stats didn't show any noticeable improvement in wedge play with more wedges. Also, to make room for the 4th wedge, I had to remove the 3 iron, but that left a hole near the top of the bag that was exposed on longer par 3s in tournament play. I'm now back to a system I played for a long time.



The Milled Grind Raw 52 is the perfect wedge. I may need to buy a backup or two before the year is out to ensure I can keep playing a raw wedge at this spot in the bag. Love it.



I'm a big fan of the Hi-Toe. It's versatile and the higher CG makes a noticeable difference when trying to flight down approach shots. While I like the ATV grind, using the Hi-Toe this year has made me long for a version with a leading edge that sits a little closer to the turf. Hoping for a lower bounce option next year, but may have to do some custom grinding and add a little more relief on the trailing edge ribbon to bring the leading edge down.



*** UPDATE: Went to town on the sole of the Hi-Toe with a belt sander and now have more of a low bounce K style wide sole grind. Also made the leading edge a little more square. Pics soon ***



Another change this year was the switch to DGS400 from KBS 610. I loved the 610 in older TaylorMade wedges that had 1" hosel bores, but I did not like it in Vokey wedges, which have a 1.5" bore. It made the tip stiffen up too much with the extra half inch insertion depth. With the Milled Grind wedges, TaylorMade moved to a 1.5" hosel bore, so the 610 no longer worked. I wasn't a fan of DGS400 in the wedges with a 1" bore, but it's great in the 1.5".



Putter

TaylorMade Itsy Bitsy proto, but not the Jason Day version released in the Vault after his 2015 PGA Championship win. This one is the DJ limited Vault release after he switched to the Spider in Fall 2016. My DJ version sets up slightly different than the JDay version and right now that looks better to my eye and seems to be better for my stroke. 4g weights. Winn standard size grip, not the midsize that comes on the retail Spider Black.



Ball

TaylorMade TP5x. Great decision to switch from the TP5. I like the higher flight and extra carry on the long irons.
TaylorMade M3 9.5, GD Tour AD GP-6s, 44.75"
TaylorMade M3 T3, Tensei Pro White 70 S, 42.5"
TaylorMade P-790 UDI 2, Aerotech SteelFiber i95 S
TaylorMade P-770 3-4, DG X100 (SSx1)
TaylorMade RSi TP 5-PW, KBS C-Taper S+
TaylorMade Milled Grind 52 Raw, DG S400 Tour Issue
TaylorMade Hi-Toe 58, DG S400 Tour Issue
TaylorMade DJ Itsy Bitsy Proto, 34"
TaylorMade TP5x #12

jll62's WITB
Post edited by Unknown User on
«134

Comments

  • Ed SettleEd Settle #InsideTMAG ClubWRX Posts: 6,047 ClubWRX
    I know you and I have talked about a thousand things, but your set up has never been in question. Extremely well thought out, with a purpose. No better example is the wedges, bent to 53 and 59. Obviously, for a reason. Very nice bag, my friend.
    Twitter: @Ed_Settle

    Driver: Callaway Epic Flash SZ 10.5 Graphite Design VR-6X
    Fairway 3w: TaylorMade M5 Ti 3/15* GD GP-6X 
    Driving Iron: TM P-790 4/23* KBS Proto Hyb 85S
    Irons: New Level 4-PW Nippon Modus 105 S
    Wedges: New Level 50/52/Callaway Custom 60 WB Grind Modus 115 Wedge 
    Putter: Something new from Toulon Design
    Ball: Callaway ERC Soft/Callaway CSX Triple Track
    Bag: Vessel Black 14 way carry

    My WITB
  • ebn2002ebn2002 Never go full retail Members Posts: 363
    I'm loving my stage 2 hybrid. Nice bag!
    PING G20 9.5*
    V-STEEL 15*
    PING G5 19*
    MP-30 4-PW
    MP-T4 52*
    PING Anser G2i
  • Danny YoungDanny Young Members Posts: 460 ✭✭
    Very nice bag , i used the atv wedges for a while and loved them and also love my rbz fairway wood , by far the best fairway club i have owned.
  • JWellsJWells Members Posts: 1,152
  • jll62jll62 ClubWRX Posts: 2,028 ClubWRX
    Ed Settle wrote:


    I know you and I have talked about a thousand things, but your set up has never been in question. Extremely well thought out, with a purpose. No better example is the wedges, bent to 53 and 59. Obviously, for a reason. Very nice bag, my friend.




    Just posted an update. Yes, bending to 53 and 59 gives me a 6 degree gap since I play a 47 degree PW (47-53-59). My coach as been trying to talk me into a 47-51-55-59 setup and remove the 3-iron (or remove the 4 and bend the 5-iron a tad stronger), but I just haven't been able to get comfortable with that. Can't wait to see what he says when he sees the UDI in the bag. Hahaha
    TaylorMade M3 9.5, GD Tour AD GP-6s, 44.75"
    TaylorMade M3 T3, Tensei Pro White 70 S, 42.5"
    TaylorMade P-790 UDI 2, Aerotech SteelFiber i95 S
    TaylorMade P-770 3-4, DG X100 (SSx1)
    TaylorMade RSi TP 5-PW, KBS C-Taper S+
    TaylorMade Milled Grind 52 Raw, DG S400 Tour Issue
    TaylorMade Hi-Toe 58, DG S400 Tour Issue
    TaylorMade DJ Itsy Bitsy Proto, 34"
    TaylorMade TP5x #12

    jll62's WITB
  • jll62jll62 ClubWRX Posts: 2,028 ClubWRX


    Very nice bag , i used the atv wedges for a while and loved them and also love my rbz fairway wood , by far the best fairway club i have owned.




    Thanks! I love the ATV protos I was able to acquire because they didn't have the flange sticking out on the back. That said, the new EF wedges are very good. I'll probably be full EF for next season once the grooves on my 54 ATV have lost their magic.



    I've tried to give the RBZ fairways a fair shot. I've got a tour issue 14.5 stage 2 proto (slightly smaller head than retail) that I love off the tee and a tour issue 3HL that I love off the deck, but they haven't been a magical "do it all" 3W for me. That **** V-Steel keeps finding its way back into my bag. It's amazing what a little confidence in a club will to for a guy. image/smile.png' class='bbc_emoticon' alt=':)' />
    TaylorMade M3 9.5, GD Tour AD GP-6s, 44.75"
    TaylorMade M3 T3, Tensei Pro White 70 S, 42.5"
    TaylorMade P-790 UDI 2, Aerotech SteelFiber i95 S
    TaylorMade P-770 3-4, DG X100 (SSx1)
    TaylorMade RSi TP 5-PW, KBS C-Taper S+
    TaylorMade Milled Grind 52 Raw, DG S400 Tour Issue
    TaylorMade Hi-Toe 58, DG S400 Tour Issue
    TaylorMade DJ Itsy Bitsy Proto, 34"
    TaylorMade TP5x #12

    jll62's WITB
  • MacDaddyMikeMacDaddyMike Play Like A Champion Members Posts: 489 ✭✭
    Love the driver!
    Cobra Fly Z+ 10* Aldila ATX Tour Blue 75x
    Taylormade SLDR Mini 14* AD DI 8X
    Titleist 913FD 18* AD DI 8x
    Taylormade UDI 20* or Titleist 913H 21* AD DI 105x
    Ping S55 4-PW Nippon Modus 130s
    Callaway PM (custom sole grind) 53*,60* DG S400
    Byron Morgan DH89
  • jll62jll62 ClubWRX Posts: 2,028 ClubWRX
    New update with more pictures. Really hoping to get an M1 in the bag this fall because the SLDR is finally starting to misbehave... image/smile.png' class='bbc_emoticon' alt=':)' />
    TaylorMade M3 9.5, GD Tour AD GP-6s, 44.75"
    TaylorMade M3 T3, Tensei Pro White 70 S, 42.5"
    TaylorMade P-790 UDI 2, Aerotech SteelFiber i95 S
    TaylorMade P-770 3-4, DG X100 (SSx1)
    TaylorMade RSi TP 5-PW, KBS C-Taper S+
    TaylorMade Milled Grind 52 Raw, DG S400 Tour Issue
    TaylorMade Hi-Toe 58, DG S400 Tour Issue
    TaylorMade DJ Itsy Bitsy Proto, 34"
    TaylorMade TP5x #12

    jll62's WITB
  • dukediv2011dukediv2011 Members Posts: 933 ✭✭
    I just ordered the RSI TP's today. What have you really liked about them?
    PXG 0811X, Gen 2, 9
    PXG 0341X, Gen 2, 15
    PXG 0317X, Gen 2, 22
    PXG 0311T, Gen 1, (6, 8, W)
    58 degree wedge (coming soon)
    Artisan 0117
  • jll62jll62 ClubWRX Posts: 2,028 ClubWRX


    I just ordered the RSI TP's today. What have you really liked about them?




    The face slots work. If you're making contact somewhere near the center of the face, the balls all carry about the distance you're expecting. That was a game changer for me because it allowed me to be a lot more aggressive with my lines. One of my regular playing partners this summer noticed right away how much more consistent my carry distances were.
    TaylorMade M3 9.5, GD Tour AD GP-6s, 44.75"
    TaylorMade M3 T3, Tensei Pro White 70 S, 42.5"
    TaylorMade P-790 UDI 2, Aerotech SteelFiber i95 S
    TaylorMade P-770 3-4, DG X100 (SSx1)
    TaylorMade RSi TP 5-PW, KBS C-Taper S+
    TaylorMade Milled Grind 52 Raw, DG S400 Tour Issue
    TaylorMade Hi-Toe 58, DG S400 Tour Issue
    TaylorMade DJ Itsy Bitsy Proto, 34"
    TaylorMade TP5x #12

    jll62's WITB
  • dukediv2011dukediv2011 Members Posts: 933 ✭✭
    Glad to hear that. I look forward to getting them!
    PXG 0811X, Gen 2, 9
    PXG 0341X, Gen 2, 15
    PXG 0317X, Gen 2, 22
    PXG 0311T, Gen 1, (6, 8, W)
    58 degree wedge (coming soon)
    Artisan 0117
  • XIEXIE Members Posts: 71
    edited Sep 12, 2015 #13
    Fantastic bag! I like the V-steel set up. Tells me that you found what works and tweaked it to perfection.



    I'm also playing the RSI TP's after coming from 2005 RAC TP's. I wasn't sure how I would like the transition, but like you I think these are here to stay for a long time.



    I've got a gap between my 3W and 4i right now and I have been considering a UDI. Do you play it much from anywhere but the tee box?
    Nike Vapor Fly Pro 9.5: Diamana S+ X
    TM M1 3HL 17: Fujikura Motore Speeder VC7.3 TS
    Nike VFP 2i: NS Pro Modus3 Tour 120x
    Cobra Baffler T-Rail+ 22: Graphite Design G70S
    Wilson FG Tour V6 6-PW: DG AMT X100
    Nike Engage 51, 55, 59
    Cleveland Huntington Beach 6

    Sometimes you beat golf, sometimes golf beats you.
  • jll62jll62 ClubWRX Posts: 2,028 ClubWRX
    XIE wrote:


    Fantastic bag! I like the V-steel set up. Tells me that you found what works and tweaked it to perfection.



    I'm also playing the RSI TP's after coming from 2005 RAC TP's. I wasn't sure how I would like the transition, but like you I think these are here to stay for a long time.



    I've got a gap between my 3W and 4i right now and I have been considering a UDI. Do you play it much from anywhere but the tee box?




    Thanks! Those 2005s were so good, but I can't get over how much I like the RSi TPs. I'm sure I'll hit the new PSi Tour at some point, but I can't imagine changing to something else any time soon. Once I find a set of irons, they tend to stay in the bag for a while. I might still be playing the 2005s if not for the groove rule change.



    I will use the UDI from the fairway, but even though it's much easier to elevate than an old school 2 iron, it's not something I can plan to stop quickly. I tend to hit it on par 5s where I have room to run the ball up. I also struggle hitting it out of the rough. A hybrid was much better out of the rough for me, so that's something to consider.



    Ultimately, I decided to put the UDI into the bag full time because I tend to have more shots each round where I need to hit it 230-240 off the tee than I do 230-240 approach shots. I will swap them depending on the course I'm playing, but 90+% of the time I have the UDI in the bag.
    TaylorMade M3 9.5, GD Tour AD GP-6s, 44.75"
    TaylorMade M3 T3, Tensei Pro White 70 S, 42.5"
    TaylorMade P-790 UDI 2, Aerotech SteelFiber i95 S
    TaylorMade P-770 3-4, DG X100 (SSx1)
    TaylorMade RSi TP 5-PW, KBS C-Taper S+
    TaylorMade Milled Grind 52 Raw, DG S400 Tour Issue
    TaylorMade Hi-Toe 58, DG S400 Tour Issue
    TaylorMade DJ Itsy Bitsy Proto, 34"
    TaylorMade TP5x #12

    jll62's WITB
  • jll62jll62 ClubWRX Posts: 2,028 ClubWRX
    Putter switch... image/cool.png' class='bbc_emoticon' alt='(cool)' />
    TaylorMade M3 9.5, GD Tour AD GP-6s, 44.75"
    TaylorMade M3 T3, Tensei Pro White 70 S, 42.5"
    TaylorMade P-790 UDI 2, Aerotech SteelFiber i95 S
    TaylorMade P-770 3-4, DG X100 (SSx1)
    TaylorMade RSi TP 5-PW, KBS C-Taper S+
    TaylorMade Milled Grind 52 Raw, DG S400 Tour Issue
    TaylorMade Hi-Toe 58, DG S400 Tour Issue
    TaylorMade DJ Itsy Bitsy Proto, 34"
    TaylorMade TP5x #12

    jll62's WITB
  • XIEXIE Members Posts: 71
    edited Sep 19, 2015 #16
    So jealous of that putter! Really like everything about it. But I would be a dead man if my I brought that one home and my girlfriend found out.
    Nike Vapor Fly Pro 9.5: Diamana S+ X
    TM M1 3HL 17: Fujikura Motore Speeder VC7.3 TS
    Nike VFP 2i: NS Pro Modus3 Tour 120x
    Cobra Baffler T-Rail+ 22: Graphite Design G70S
    Wilson FG Tour V6 6-PW: DG AMT X100
    Nike Engage 51, 55, 59
    Cleveland Huntington Beach 6

    Sometimes you beat golf, sometimes golf beats you.
  • DizzDizz J.W. Members Posts: 14,258
    I really like your setup man, the RSi TP irons and TP EF wedges are awesome products TM put out this year. I actually really, really like the new wedges... I think they look awesome from address and in the bag. And of course the Jason Day proto putter is SICK... were you lucky enough to grab one of the 20 from The Vault or did you have to buy it from someone else that got it? If you got it from The Vault I was wondering if you could customize specs on it or if they all came just as JD uses his...



    I have been searching eBay trying to find one and the best I've found is $2500+...
    XHP 3-Deep (13)- 7.3X @ 43.5”
    X-Forged UT (#3- 21)- DG X700
    716MB (5-PW)- DG S400
    Vokey (TVD SM7 RAW 52 & SM6 RAW 58)- DG S400
    Cameron Napa California @ 34"
  • vsteel1991vsteel1991 Members Posts: 376
    way to bag the best FW ever made!!!!!! awesome bag
    910 d2 9.5* stiff project x 7c3
    910f 15* and 19* stiff diamana
    '09 burner 19* stock stiff
    710 AP1 5-aw TT 105t
    Sm4 tvd 52* and 58* kbs tour
    Daddy long legs 38" counter balanced
  • jll62jll62 ClubWRX Posts: 2,028 ClubWRX
    Dizz wrote:


    I really like your setup man, the RSi TP irons and TP EF wedges are awesome products TM put out this year. I actually really, really like the new wedges... I think they look awesome from address and in the bag. And of course the Jason Day proto putter is SICK... were you lucky enough to grab one of the 20 from The Vault or did you have to buy it from someone else that got it? If you got it from The Vault I was wondering if you could customize specs on it or if they all came just as JD uses his...



    I have been searching eBay trying to find one and the best I've found is $2500+...




    Thanks! I agree it was a good year for TM products. What's funny is that even though I love my EF 60 degree, I just bought a couple more 54 degree ATV proto heads off the TM Vault flash sale site as replacements for my existing 54. That wedge is a perfect fit right now, so I wasn't ready to move into the EF yet.



    I was fortunate enough to snag one of the 20 JDay protos from the Vault (I would not be shocked to find out that I was the first one to complete the order process, because I flew through those screens. Hahaha). The putter came with stock specs (34", 70, 2.5) and no options for customization. I play my spiders at 69, 3.0, so after I saw the first one go for so much on eBay, I had to think long and hard about what to do since bending it was almost certain to damage the paint based on pics I'd seen of JDay's gamer. However, in the end I decided that I had purchased the putter with the intent of gaming it, so I stuck to that. Very happy with the decision even if some of my buddies think I'm nuts for not flipping it.
    TaylorMade M3 9.5, GD Tour AD GP-6s, 44.75"
    TaylorMade M3 T3, Tensei Pro White 70 S, 42.5"
    TaylorMade P-790 UDI 2, Aerotech SteelFiber i95 S
    TaylorMade P-770 3-4, DG X100 (SSx1)
    TaylorMade RSi TP 5-PW, KBS C-Taper S+
    TaylorMade Milled Grind 52 Raw, DG S400 Tour Issue
    TaylorMade Hi-Toe 58, DG S400 Tour Issue
    TaylorMade DJ Itsy Bitsy Proto, 34"
    TaylorMade TP5x #12

    jll62's WITB
  • jll62jll62 ClubWRX Posts: 2,028 ClubWRX
    vsteel1991 wrote:


    way to bag the best FW ever made!!!!!! awesome bag




    It's so good! I keep getting tempted by other heads, but I always come back to this one. I wish I could find a purple ice shaft to put in my 15 degree head, though. My 13 degree T/S is amazing off the tee and serviceable off the fairway, but there are courses I occasionally play where there are no 3W shots from the tee and par 5s where you need to bring the ball in with a higher trajectory. I think the 15 degree would be great for those courses, but I haven't found a shaft I like.
    TaylorMade M3 9.5, GD Tour AD GP-6s, 44.75"
    TaylorMade M3 T3, Tensei Pro White 70 S, 42.5"
    TaylorMade P-790 UDI 2, Aerotech SteelFiber i95 S
    TaylorMade P-770 3-4, DG X100 (SSx1)
    TaylorMade RSi TP 5-PW, KBS C-Taper S+
    TaylorMade Milled Grind 52 Raw, DG S400 Tour Issue
    TaylorMade Hi-Toe 58, DG S400 Tour Issue
    TaylorMade DJ Itsy Bitsy Proto, 34"
    TaylorMade TP5x #12

    jll62's WITB
  • jll62jll62 ClubWRX Posts: 2,028 ClubWRX
    XIE wrote:


    So jealous of that putter! Really like everything about it. But I would be a dead man if my I brought that one home and my girlfriend found out.




    The secret is to have so many putters that they all just blend together and become noise. image/smile.png' class='bbc_emoticon' alt=':)' />
    TaylorMade M3 9.5, GD Tour AD GP-6s, 44.75"
    TaylorMade M3 T3, Tensei Pro White 70 S, 42.5"
    TaylorMade P-790 UDI 2, Aerotech SteelFiber i95 S
    TaylorMade P-770 3-4, DG X100 (SSx1)
    TaylorMade RSi TP 5-PW, KBS C-Taper S+
    TaylorMade Milled Grind 52 Raw, DG S400 Tour Issue
    TaylorMade Hi-Toe 58, DG S400 Tour Issue
    TaylorMade DJ Itsy Bitsy Proto, 34"
    TaylorMade TP5x #12

    jll62's WITB
  • DizzDizz J.W. Members Posts: 14,258
    What's it like putting with the Spider without any alignment aid?
    XHP 3-Deep (13)- 7.3X @ 43.5”
    X-Forged UT (#3- 21)- DG X700
    716MB (5-PW)- DG S400
    Vokey (TVD SM7 RAW 52 & SM6 RAW 58)- DG S400
    Cameron Napa California @ 34"
  • jll62jll62 ClubWRX Posts: 2,028 ClubWRX
    Dizz wrote:


    What's it like putting with the Spider without any alignment aid?




    I'm torn on it so far, to be honest. I expected to love the lack of a sightline, but in practice I think that I was relying on the line of my Spider S to set the putter down in the correct spot. And I think it had a subconscious effect on starting my stroke. Without the line, my putter head is drifting to different spots behind the ball and I have to focus heavily on starting the stroke correctly.



    I usually putt with a line on the ball and the first thing I tried was to remove that, but it was a disaster. I put the line back on 3 holes into the round. I love everything about the putter, but I may need a sightline. I don't have any tournament rounds left this year, so I'm going to put a strip of white tape on the head for the rest of the season. If that's a success, I may have to modify the head next year in some fashion to make it legal for play.
    TaylorMade M3 9.5, GD Tour AD GP-6s, 44.75"
    TaylorMade M3 T3, Tensei Pro White 70 S, 42.5"
    TaylorMade P-790 UDI 2, Aerotech SteelFiber i95 S
    TaylorMade P-770 3-4, DG X100 (SSx1)
    TaylorMade RSi TP 5-PW, KBS C-Taper S+
    TaylorMade Milled Grind 52 Raw, DG S400 Tour Issue
    TaylorMade Hi-Toe 58, DG S400 Tour Issue
    TaylorMade DJ Itsy Bitsy Proto, 34"
    TaylorMade TP5x #12

    jll62's WITB
  • OspreyCIOspreyCI Members Posts: 4,799 ✭✭
    Awesome setup! You still using the JD putter? Still using the M1 fairway?
    TM M6 10.5 GD AD DI Black 6
    TM M2 15* Speeder 757 Evo TS
    TM M2 #3 19* Fujikura
    TM M3 4 Iron Atmos
    TM P790 5-AW Modus 105
    TM MG 54*
    TM HI TOE 60*
    TM MY Spider Tour Black
  • scratchswingerscratchswinger Members Posts: 16,204 ✭✭
    How do you like the putter without a sight line?
  • peakpositionpeakposition Members Posts: 550
    that's a players bag!
    TaylorMade M2 2016, 8.0* UST ATTAS GoGo 5 6X
    TaylorMade SLDR 14.3* UST Chrome 8FT5
    Mizuno MP Fli-Hi 18* Speeder TS HB 9.8X
    Srixon Z 765 4-PW Nippon Modus3 Tour 105 S
    Titleist SM6 50F, 56M, 60K Kuro Kage TiNi LBP 105TX
    Evnroll ER2

    WITB Link
  • timblekingtimbleking Members Posts: 219 ✭✭
    Nice handicap in there. Serious clubs for a serious golfer.
  • Ed SettleEd Settle #InsideTMAG ClubWRX Posts: 6,047 ClubWRX
    Don't you have a few clubs you need to update?? Let's go your are slacking! 🤓
    Twitter: @Ed_Settle

    Driver: Callaway Epic Flash SZ 10.5 Graphite Design VR-6X
    Fairway 3w: TaylorMade M5 Ti 3/15* GD GP-6X 
    Driving Iron: TM P-790 4/23* KBS Proto Hyb 85S
    Irons: New Level 4-PW Nippon Modus 105 S
    Wedges: New Level 50/52/Callaway Custom 60 WB Grind Modus 115 Wedge 
    Putter: Something new from Toulon Design
    Ball: Callaway ERC Soft/Callaway CSX Triple Track
    Bag: Vessel Black 14 way carry

    My WITB
  • The Chicken ConnoisseurThe Chicken Connoisseur The Pengest Munch Banned Posts: 3,732
    Do you think the RSI TP's would be more forgiving than the '08 Tour Preferred Irons?
  • staysober for golfstaysober for golf Low carb guy Members Posts: 1,030 ✭✭
    Great update there J!!
    Titleist 8.5* 915 D3 S.
    Titleist 15* 915 FD S.
    Callie 4U, 5i, 6i Epic S. 
    Callie X2H Pro 7-PW S. 
    Callie 56* X forged S.
    Callie Odys wide b/w s.
  • Porterm23Porterm23 ClubWRX Posts: 193 ✭✭
    Great bag. Love the attention to detail.
    M1 440 9.5

    Adams DHY 18

    MP-18 SC 3-PW

    SM7 52 56 62

    Method 001

    Snell MTB X




Sign In or Register to comment.