MACHINE M12 Mini-Megalodon for 2015

Hey Everyone,

I'm excited to show off a new model that we have in the final stages of development. This is our new M12 Mini Megalodon and the first "Super Converter" model.

The new M12 head is a modified version of our M11 that is symmetrical in the M12 vs. slightly heel biased in the M11.

This is a super solid feeling, high MOI design that really rolls the ball great, feels so soft yet responsive, and sounds great too. The weighting works out great for all types of our modular hoses to be used on the M12 with the Mini Megalodon flanges. And like it's big brother the M4 Megalodon, there is a wide range of weight adjustability with these models.

We've also added a new and revolutionary mode of adjustment on these patented Converter putters. We're making a few tweaks to those technologies, and as soon as they are ready we'll unveil them here in this and our other threads. Sorry for the tease! lol I do think everyone will like the new innovation and I'm eager to show and tell more about these cool features and benefits.

M12 Prototype #1 of 3 shown here with a Mini-Megaladon flange and set up with the following necks:

A Fully Skeletonized Square Cut Plumber Neck

A Stubby Modular Center Shaft (for slight toe down to FB using our Delta Mods)

A Double Bend Shaft over Stud.

A new Limited Edition "Major Hunter Green" Logo Medallion is also shown in honor of the first major of the year taking place this week!

A couple of comparison shots show the M12 next to a M4 Megalodon.

Please contact Chris or me if anyone is interested in the first three (3) Prototypes, the first Limited Edition run or a Custom version after the Limited models are spoken for.

Thanks for checking them out!

All the best,

-Dave Billings

What size is it compared to the Odyssey WHP #7 and the smaller head Works #7?

Left Hand?

[quote name='Wardonation' timestamp='1428346922' post='11295969']
What size is it compared to the Odyssey WHP #7 and the smaller head Works #7?
[/quote]

Sorry, I don't have those putters in my collection. The M12 is just a hair over 3.805" from heel to toe and 3.105" from leading edge to back edge.

[quote name='Lord Helmet' timestamp='1428347734' post='11296057']
Left Hand?
[/quote]

Yes, we'll be making at least a couple in the Limited Edition line and they will be available as a standard LH model going forward.

Thanks!

-Dave

Base price? PM me if you would rather. No worries!

[quote name='Lord Helmet' timestamp='1428349573' post='11296351']
Base price? PM me if you would rather. No worries!
[/quote]

Base price starts at $399 in 303 with a double bend shaft and $450 with plumber neck. LH same prices as RH!

-DB

Oh man..might have to break into the savings account

That style is not my preference for personal use, however the details in execution almost make me wish it was! The rounding from topline to sole at both heel and toe, as well as softened edges of flange are very nice touches.

Thanks for the comments everyone!

This has definitely inspired my "Mini Bespoke" idea going forward. Great stuff as always

Thanks RB! You know we love making Bespoke putters!

Ready whenever you are. Just send $ and more Ghost Pepper jerky! (seriously)

-DB

Must resist but can not!
Amazing as alway's this will have to be my next flatstick. Bravo

Thanks Vicious! Please let us know if we can help.

Thanks in advance

-Chris

Love the name of this putter. You guys do some amazing work. Wish I could afford one someday!

[quote name='Drive4shoPutt4Dough' timestamp='1428708265' post='11330631']
Love the name of this putter. You guys do some amazing work. Wish I could afford one someday!
[/quote]

Thanks very much for the kind comments.

We've started our own official eBay story to find new homes for some experienced, gently used putters that have come back from reps, demo days, or here in the Studio, our old Studio at Hank Haney's etc. We can also refinish, refurbish, etc., so you can find some of our work for a more modest price. Hope that helps!

We'll also be putting some one-of-a-kind protos and other testers and experimental models on there to make more room in our R&D shelves for new models we're working on.

http://www.ebay.com/usr/doglegrightco

We'll be putting more models up later today and going forward.

Thanks,

-Dave

-Dave

Hey Everyone,

Just wanted to thank you for all the kind comments on the new M12 Mini-Megalodon putters. Bobby Jones 1 of 1 Bespoke ART Megaline version is sold! MACHINE M12 Prototypes #1 of 3 and #2 of 3 are sold! And five (5) of the first Limited Edition run of 10 are also sold! Get yours while they are hot!

More info will follow on the surprise new adjustability feature. Excited to share the details.

Thanks again for all the wonderful support here.

All the best,

-Dave

[quote name='DB MACHINE' timestamp='1428939883' post='11347885']
[quote name='Drive4shoPutt4Dough' timestamp='1428708265' post='11330631']
Love the name of this putter. You guys do some amazing work. Wish I could afford one someday!
[/quote]

Thanks very much for the kind comments.

We've started our own official eBay story to find new homes for some experienced, gently used putters that have come back from reps, demo days, or here in the Studio, our old Studio at Hank Haney's etc. We can also refinish, refurbish, etc., so you can find some of our work for a more modest price. Hope that helps!

We'll also be putting some one-of-a-kind protos and other testers and experimental models on there to make more room in our R&D shelves for new models we're working on.

http://www.ebay.com/usr/doglegrightco

We'll be putting more models up later today and going forward.

Thanks,

-Dave

-Dave
[/quote]

Very cool. Thanks for the heads up.

Can you fit a ball in the middle of the small version? Trying to figure out size before I order...

[quote name='Wardonation' timestamp='1428983458' post='11353495']
Can you fit a ball in the middle of the small version? Trying to figure out size before I order...
[/quote]

The cutout in the M12 is smaller than a golf ball. The M4 Megalodon's cutout is the width of the ball. We can (and do) adjust the milling on the M4 to either allow the ball to pass through or be picked up based on user-request.

Hope this helps.

Thanks for your interest!

-Dave

Good looking flat stick

I am ready to order, help???

[quote name='Wardonation' timestamp='1438807893' post='12085010']
I am ready to order, help???
[/quote]

Sounds great! Sorry Chris is tied up with other work right now, but we're here at the shop.

Our toll free number is 877-835-9652 and I am at Extension 103 if you'd like to call. You can also PM me here or send an email to [email protected] and I'll give you my personal email.

Thanks,

-Dave Billings