Cota0429 WITB

2456747

Comments

  • cota0429cota0429 ClubWRX Posts: 3,508 ClubWRX
    Cota, Cota, Cota ...... Im not sure how I feel about those TM's in your bag (you know, cause I have a say and all!!! LOL!)




    I know I know! I'm so anti TM!!! But man they might be staying. I really think the Vapor PC is what I should be leaning towards. It may be just me but the PCs are very chunky in the hosels. Which is why I went Pro 6-Pw. If that wasn't the case I might have just went full PC. The TPs transition nice and blend together well. PC hosels... Too thick
    PING G400 LST Diamana LTD D+ 60 TX
    Callaway Rogue Diamana LTD D+ 80 TX
    Artisan VR Pro's by Mike Taylor X100 soft stepped TW Specs
    SM7 52F, 56M, Oven Green Dot Engage 60 TS
    TW Prototype 001

    WITB http://www.golfwrx.com/forums/topic/1183320-cota0429-nike-oven-baked-witb-52215/
  • cota0429cota0429 ClubWRX Posts: 3,508 ClubWRX
    Besides the irons I am currently testing



    915hd 20.5 with Tour Ad Di 105x. I dropped the 5 wood out of the bag to add another wedge. I hit the Callaway x2 almost a little too long at times but it's a very solid club. Due to the penetrating flight I am testing it vs the 915hd to see which I can flight higher when needed. At the moment I still like the Callaway. It's a great fairway finder 230-235. Sometime though it can jump on me 240-245 which is not what I'm looking for coming into greens. Looking for more of a softer drop and stop. One thing I never liked about hybrids was they were easy to overcook right to left. The Callaway doesn't and with the adjustability of the 915hd it performs just as well. Leaning more towards the TPs in the irons and sticking with the X2 for my hybrid. I also ordered another 3 wood from Japan. Nike Limited Vapor Speed. I'm hoping it's similar to the tour issue version from Nike. Sounds like it is at 167cc but won't know until it gets here. Might be saying goodbye to my old Vr Pro LTD fairway wood.
    PING G400 LST Diamana LTD D+ 60 TX
    Callaway Rogue Diamana LTD D+ 80 TX
    Artisan VR Pro's by Mike Taylor X100 soft stepped TW Specs
    SM7 52F, 56M, Oven Green Dot Engage 60 TS
    TW Prototype 001

    WITB http://www.golfwrx.com/forums/topic/1183320-cota0429-nike-oven-baked-witb-52215/
  • GC70GC70 What's Next? ClubWRX Posts: 7,526 ✭✭
    cota0429 wrote:


    Besides the irons I am currently testing



    915hd 20.5 with Tour Ad Di 105x. I dropped the 5 wood out of the bag to add another wedge. I hit the Callaway x2 almost a little too long at times but it's a very solid club. Due to the penetrating flight I am testing it vs the 915hd to see which I can flight higher when needed. At the moment I still like the Callaway. It's a great fairway finder 230-235. Sometime though it can jump on me 240-245 which is not what I'm looking for coming into greens. Looking for more of a softer drop and stop. One thing I never liked about hybrids was they were easy to overcook right to left. The Callaway doesn't and with the adjustability of the 915hd it performs just as well. Leaning more towards the TPs in the irons and sticking with the X2 for my hybrid. I also ordered another 3 wood from Japan. Nike Limited Vapor Speed. I'm hoping it's similar to the tour issue version from Nike. Sounds like it is at 167cc but won't know until it gets here. Might be saying goodbye to my old Vr Pro LTD fairway wood.


    Did you ever think about getting the 915h? I know the H might be a little big , but it doesn't have the offset like the hd does. Can't wait to see your vapor! Did it cost a lot with shipping? What is the stock shaft in Japan?
    Cobra F9 8* Atmos Blue 6S
    XR Steelhead 15* Atmos Red 7S
    818 H1 Atmos Blue 8S
    Apex CF19 4-AW C-Taper Lite
    SM7's RAW 50F - 54S - 58M
    Nike 006 Paul Casey Proto (Oven)
    Nike 006 Rory Proto (Oven)
    Pro V1x / CSX

    WITB Link
  • cota0429cota0429 ClubWRX Posts: 3,508 ClubWRX
    MNNikeGuy wrote:
    cota0429 wrote:


    Besides the irons I am currently testing



    915hd 20.5 with Tour Ad Di 105x. I dropped the 5 wood out of the bag to add another wedge. I hit the Callaway x2 almost a little too long at times but it's a very solid club. Due to the penetrating flight I am testing it vs the 915hd to see which I can flight higher when needed. At the moment I still like the Callaway. It's a great fairway finder 230-235. Sometime though it can jump on me 240-245 which is not what I'm looking for coming into greens. Looking for more of a softer drop and stop. One thing I never liked about hybrids was they were easy to overcook right to left. The Callaway doesn't and with the adjustability of the 915hd it performs just as well. Leaning more towards the TPs in the irons and sticking with the X2 for my hybrid. I also ordered another 3 wood from Japan. Nike Limited Vapor Speed. I'm hoping it's similar to the tour issue version from Nike. Sounds like it is at 167cc but won't know until it gets here. Might be saying goodbye to my old Vr Pro LTD fairway wood.


    Did you ever think about getting the 915h? I know the H might be a little big , but it doesn't have the offset like the hd does. Can't wait to see your vapor! Did it cost a lot with shipping? What is the stock shaft in Japan?




    I also forgot to mention I have the 913h. Great club but I did like the Callaway more. It's more compact and more "iron" like vs big. The offset doesn't bother me much in the 915hd. I hardly notice it. It's more of a matter of misses and flight.



    The Vapor Limited shaft is a carbon shaft. I just got the cheapest option because I am throwing my Ion Diamana BB 83x in it anyways. I ended up paying 237 shipped. They have upgraded shaft options though if wanted. Even if it is a smaller version of the Speed shape I'm okay with that as well. Really hoping it looks like the tour issue version though. Beautiful looking club. I didn't even know about the Japan version until my fitter at the Oven mentioned it. I've been wanting a newer 3 wood with recent technology. The VR Pro LTD is such a great 3 wood and I won't have any problems going back to it which I've done a few times already.
    PING G400 LST Diamana LTD D+ 60 TX
    Callaway Rogue Diamana LTD D+ 80 TX
    Artisan VR Pro's by Mike Taylor X100 soft stepped TW Specs
    SM7 52F, 56M, Oven Green Dot Engage 60 TS
    TW Prototype 001

    WITB http://www.golfwrx.com/forums/topic/1183320-cota0429-nike-oven-baked-witb-52215/
  • GC70GC70 What's Next? ClubWRX Posts: 7,526 ✭✭
    $237 sounds like a good deal to me. What's the ETA?
    Cobra F9 8* Atmos Blue 6S
    XR Steelhead 15* Atmos Red 7S
    818 H1 Atmos Blue 8S
    Apex CF19 4-AW C-Taper Lite
    SM7's RAW 50F - 54S - 58M
    Nike 006 Paul Casey Proto (Oven)
    Nike 006 Rory Proto (Oven)
    Pro V1x / CSX

    WITB Link
  • cota0429cota0429 ClubWRX Posts: 3,508 ClubWRX
    MNNikeGuy wrote:
    $237 sounds like a good deal to me. What's the ETA?




    Waiting for the shipping to update. It's Japanese EMS service. Most likely 10 days I would think? Everything is in Japanese so I have to use google translate to understand what it's saying lol
    PING G400 LST Diamana LTD D+ 60 TX
    Callaway Rogue Diamana LTD D+ 80 TX
    Artisan VR Pro's by Mike Taylor X100 soft stepped TW Specs
    SM7 52F, 56M, Oven Green Dot Engage 60 TS
    TW Prototype 001

    WITB http://www.golfwrx.com/forums/topic/1183320-cota0429-nike-oven-baked-witb-52215/
  • Beastmode BrokerBeastmode Broker Canadian AF Members Posts: 6,317 ✭✭
    that 3w intrigues me .... ALOT

    keep us in the loop on that RIG
    Taylormade M1 440 9.5 | Kuro Kage DC 60 X
    Taylormade M2 15 | RIP Alpha B 70 X
    Callaway XHP 20 | RIP Alpha 85 X
    Mizuno JPX 900T 4-PW | TI DGX100 ssx1
    Callaway MD3 RAW 52S / 56W | DGS300
    Nike Engage 60 TS | DGS300
    Taylormade Milled Collection Mullen 35"
  • GC70GC70 What's Next? ClubWRX Posts: 7,526 ✭✭
    Cota what head cover comes with the Japan version?
    Cobra F9 8* Atmos Blue 6S
    XR Steelhead 15* Atmos Red 7S
    818 H1 Atmos Blue 8S
    Apex CF19 4-AW C-Taper Lite
    SM7's RAW 50F - 54S - 58M
    Nike 006 Paul Casey Proto (Oven)
    Nike 006 Rory Proto (Oven)
    Pro V1x / CSX

    WITB Link
  • cota0429cota0429 ClubWRX Posts: 3,508 ClubWRX


    that 3w intrigues me .... ALOT

    keep us in the loop on that RIG




    for sure!


    MNNikeGuy wrote:


    Cota what head cover comes with the Japan version?




    sadly just the standard US version. My favorite Nike head cover for woods is the Vr Pro Pom ones. The red and white. I might just use that one still
    PING G400 LST Diamana LTD D+ 60 TX
    Callaway Rogue Diamana LTD D+ 80 TX
    Artisan VR Pro's by Mike Taylor X100 soft stepped TW Specs
    SM7 52F, 56M, Oven Green Dot Engage 60 TS
    TW Prototype 001

    WITB http://www.golfwrx.com/forums/topic/1183320-cota0429-nike-oven-baked-witb-52215/
  • cota0429cota0429 ClubWRX Posts: 3,508 ClubWRX
    Today I played 18. My son had a tournament this morning so I watched him all morning and got the bug to play. I am in the middle of a swing change and played decently. Shot 75 on a course that is 75/138 @ 7200 approx. Shot even par on the front. The RSi irons are pretty legit especially with the Modus 125x. I hit some shots that didn't feel too good swing wise but ended up pretty **** decent. I clanked a 189 yard 6 iron on the last hole that ended up 5 feet. 163 yard 7 iron floater into a gusty headwind that held its line beautifully to 5 feet. Shots that I know would have not turned out as good with the Vapor Pros. Also got to finally test my Engage 51, 55 square. I am in love with these wedges. I have to get the distance dialed in as I am not used to the extra spin. Seems like the added bounce hasn't effected play ability at all which was one of my concerns weakening the loft. Lastly the 915hd performed extremely well. Almost double eagled a par 5. Had 237 to the flag and hit the pin on a roll. I can't believe it didn't go in! Also had 227 uphill into a slight headwind didn't make great contact but the ball held its line well and I had 20 feet for birdie. When looking for the right clubs for me I always pay attention more to how good are my bad swings with the club. I think I like what I see with the 915hd and the RSi's at this point. Hit some great shots off the tee with the 915hd as well. Solid club. I could honestly go either way between this and the Cally right now. Going to keep it in the bag for now.
    PING G400 LST Diamana LTD D+ 60 TX
    Callaway Rogue Diamana LTD D+ 80 TX
    Artisan VR Pro's by Mike Taylor X100 soft stepped TW Specs
    SM7 52F, 56M, Oven Green Dot Engage 60 TS
    TW Prototype 001

    WITB http://www.golfwrx.com/forums/topic/1183320-cota0429-nike-oven-baked-witb-52215/
  • cmb71cmb71 ClubWRX Posts: 1,414 ✭✭
    cota0429 wrote:


    Today I played 18. My son had a tournament this morning so I watched him all morning and got the bug to play. I am in the middle of a swing change and played decently. Shot 75 on a course that is 75/138 @ 7200 approx. Shot even par on the front. The RSi irons are pretty legit especially with the Modus 125x. I hit some shots that didn't feel too good swing wise but ended up pretty **** decent. I clanked a 189 yard 6 iron on the last hole that ended up 5 feet. 163 yard 7 iron floater into a gusty headwind that held its line beautifully to 5 feet. Shots that I know would have not turned out as good with the Vapor Pros. Also got to finally test my Engage 51, 55 square. I am in love with these wedges. I have to get the distance dialed in as I am not used to the extra spin. Seems like the added bounce hasn't effected play ability at all which was one of my concerns weakening the loft. Lastly the 915hd performed extremely well. Almost double eagled a par 5. Had 237 to the flag and hit the pin on a roll. I can't believe it didn't go in! Also had 227 uphill into a slight headwind didn't make great contact but the ball held its line well and I had 20 feet for birdie. When looking for the right clubs for me I always pay attention more to how good are my bad swings with the club. I think I like what I see with the 915hd and the RSi's at this point. Hit some great shots off the tee with the 915hd as well. Solid club. I could honestly go either way between this and the Cally right now. Going to keep it in the bag for now.




    But did you make the eagle? We all need to know. image/smile.png' class='bbc_emoticon' alt=':)' /> Nice round!
    TaylorMade M4 8.5* - Aldila CopperHead X-Torsion 70TX
    TaylorMade M5 15* - Fuji Pro 2.0 Tour Spec
    TaylorMade GAPR LO 2 Iron - Nippon Modus Tour 105
    TaylorMade P7-TW 3-PW - Nippon Modus Tour 105
    TaylorMade Milled Grind Raw 54* & 60* - Nippon Modus 115 Wedge
    Scotty Cameron Phantom X 6 STR
  • cota0429cota0429 ClubWRX Posts: 3,508 ClubWRX
    edited May 31, 2015 #43
    cmb71 wrote:

    cota0429 wrote:


    Today I played 18. My son had a tournament this morning so I watched him all morning and got the bug to play. I am in the middle of a swing change and played decently. Shot 75 on a course that is 75/138 @ 7200 approx. Shot even par on the front. The RSi irons are pretty legit especially with the Modus 125x. I hit some shots that didn't feel too good swing wise but ended up pretty **** decent. I clanked a 189 yard 6 iron on the last hole that ended up 5 feet. 163 yard 7 iron floater into a gusty headwind that held its line beautifully to 5 feet. Shots that I know would have not turned out as good with the Vapor Pros. Also got to finally test my Engage 51, 55 square. I am in love with these wedges. I have to get the distance dialed in as I am not used to the extra spin. Seems like the added bounce hasn't effected play ability at all which was one of my concerns weakening the loft. Lastly the 915hd performed extremely well. Almost double eagled a par 5. Had 237 to the flag and hit the pin on a roll. I can't believe it didn't go in! Also had 227 uphill into a slight headwind didn't make great contact but the ball held its line well and I had 20 feet for birdie. When looking for the right clubs for me I always pay attention more to how good are my bad swings with the club. I think I like what I see with the 915hd and the RSi's at this point. Hit some great shots off the tee with the 915hd as well. Solid club. I could honestly go either way between this and the Cally right now. Going to keep it in the bag for now.




    But did you make the eagle? We all need to know. image/smile.png' class='bbc_emoticon' alt=':)' /> Nice round!




    I missed the 4 footer lol. Didn't read the break correctly. Not going to lie :/
    PING G400 LST Diamana LTD D+ 60 TX
    Callaway Rogue Diamana LTD D+ 80 TX
    Artisan VR Pro's by Mike Taylor X100 soft stepped TW Specs
    SM7 52F, 56M, Oven Green Dot Engage 60 TS
    TW Prototype 001

    WITB http://www.golfwrx.com/forums/topic/1183320-cota0429-nike-oven-baked-witb-52215/
  • cmb71cmb71 ClubWRX Posts: 1,414 ✭✭
    edited May 31, 2015 #44
    cota0429 wrote:

    cmb71 wrote:

    cota0429 wrote:


    Today I played 18. My son had a tournament this morning so I watched him all morning and got the bug to play. I am in the middle of a swing change and played decently. Shot 75 on a course that is 75/138 @ 7200 approx. Shot even par on the front. The RSi irons are pretty legit especially with the Modus 125x. I hit some shots that didn't feel too good swing wise but ended up pretty **** decent. I clanked a 189 yard 6 iron on the last hole that ended up 5 feet. 163 yard 7 iron floater into a gusty headwind that held its line beautifully to 5 feet. Shots that I know would have not turned out as good with the Vapor Pros. Also got to finally test my Engage 51, 55 square. I am in love with these wedges. I have to get the distance dialed in as I am not used to the extra spin. Seems like the added bounce hasn't effected play ability at all which was one of my concerns weakening the loft. Lastly the 915hd performed extremely well. Almost double eagled a par 5. Had 237 to the flag and hit the pin on a roll. I can't believe it didn't go in! Also had 227 uphill into a slight headwind didn't make great contact but the ball held its line well and I had 20 feet for birdie. When looking for the right clubs for me I always pay attention more to how good are my bad swings with the club. I think I like what I see with the 915hd and the RSi's at this point. Hit some great shots off the tee with the 915hd as well. Solid club. I could honestly go either way between this and the Cally right now. Going to keep it in the bag for now.




    But did you make the eagle? We all need to know. image/smile.png' class='bbc_emoticon' alt=':)' /> Nice round!




    I missed the 4 footer lol. Didn't read the break correctly. Not going to lie :/




    LOL, i appreciate the honesty... I was pulling for you, but wondered given the non-mention. Been there, cota, too many times. image/smile.png' class='bbc_emoticon' alt=':)' />
    TaylorMade M4 8.5* - Aldila CopperHead X-Torsion 70TX
    TaylorMade M5 15* - Fuji Pro 2.0 Tour Spec
    TaylorMade GAPR LO 2 Iron - Nippon Modus Tour 105
    TaylorMade P7-TW 3-PW - Nippon Modus Tour 105
    TaylorMade Milled Grind Raw 54* & 60* - Nippon Modus 115 Wedge
    Scotty Cameron Phantom X 6 STR
  • cota0429cota0429 ClubWRX Posts: 3,508 ClubWRX
    cmb71 wrote:
    cota0429 wrote:

    cmb71 wrote:

    cota0429 wrote:


    Today I played 18. My son had a tournament this morning so I watched him all morning and got the bug to play. I am in the middle of a swing change and played decently. Shot 75 on a course that is 75/138 @ 7200 approx. Shot even par on the front. The RSi irons are pretty legit especially with the Modus 125x. I hit some shots that didn't feel too good swing wise but ended up pretty **** decent. I clanked a 189 yard 6 iron on the last hole that ended up 5 feet. 163 yard 7 iron floater into a gusty headwind that held its line beautifully to 5 feet. Shots that I know would have not turned out as good with the Vapor Pros. Also got to finally test my Engage 51, 55 square. I am in love with these wedges. I have to get the distance dialed in as I am not used to the extra spin. Seems like the added bounce hasn't effected play ability at all which was one of my concerns weakening the loft. Lastly the 915hd performed extremely well. Almost double eagled a par 5. Had 237 to the flag and hit the pin on a roll. I can't believe it didn't go in! Also had 227 uphill into a slight headwind didn't make great contact but the ball held its line well and I had 20 feet for birdie. When looking for the right clubs for me I always pay attention more to how good are my bad swings with the club. I think I like what I see with the 915hd and the RSi's at this point. Hit some great shots off the tee with the 915hd as well. Solid club. I could honestly go either way between this and the Cally right now. Going to keep it in the bag for now.




    But did you make the eagle? We all need to know. image/smile.png' class='bbc_emoticon' alt=':)' /> Nice round!




    I missed the 4 footer lol. Didn't read the break correctly. Not going to lie :/




    LOL, i appreciate the honesty... I was pulling for you, but wondered given the non-mention. Been there, cota, too many times. image/smile.png' class='bbc_emoticon' alt=':)' />




    Didn't putt well today which normally isn't the case. Just nice to get out and play finally!
    PING G400 LST Diamana LTD D+ 60 TX
    Callaway Rogue Diamana LTD D+ 80 TX
    Artisan VR Pro's by Mike Taylor X100 soft stepped TW Specs
    SM7 52F, 56M, Oven Green Dot Engage 60 TS
    TW Prototype 001

    WITB http://www.golfwrx.com/forums/topic/1183320-cota0429-nike-oven-baked-witb-52215/
  • cmb71cmb71 ClubWRX Posts: 1,414 ✭✭
    edited May 31, 2015 #46
    cota0429 wrote:

    cmb71 wrote:
    cota0429 wrote:

    cmb71 wrote:

    cota0429 wrote:


    Today I played 18. My son had a tournament this morning so I watched him all morning and got the bug to play. I am in the middle of a swing change and played decently. Shot 75 on a course that is 75/138 @ 7200 approx. Shot even par on the front. The RSi irons are pretty legit especially with the Modus 125x. I hit some shots that didn't feel too good swing wise but ended up pretty **** decent. I clanked a 189 yard 6 iron on the last hole that ended up 5 feet. 163 yard 7 iron floater into a gusty headwind that held its line beautifully to 5 feet. Shots that I know would have not turned out as good with the Vapor Pros. Also got to finally test my Engage 51, 55 square. I am in love with these wedges. I have to get the distance dialed in as I am not used to the extra spin. Seems like the added bounce hasn't effected play ability at all which was one of my concerns weakening the loft. Lastly the 915hd performed extremely well. Almost double eagled a par 5. Had 237 to the flag and hit the pin on a roll. I can't believe it didn't go in! Also had 227 uphill into a slight headwind didn't make great contact but the ball held its line well and I had 20 feet for birdie. When looking for the right clubs for me I always pay attention more to how good are my bad swings with the club. I think I like what I see with the 915hd and the RSi's at this point. Hit some great shots off the tee with the 915hd as well. Solid club. I could honestly go either way between this and the Cally right now. Going to keep it in the bag for now.




    But did you make the eagle? We all need to know. image/smile.png' class='bbc_emoticon' alt=':)' /> Nice round!




    I missed the 4 footer lol. Didn't read the break correctly. Not going to lie :/




    LOL, i appreciate the honesty... I was pulling for you, but wondered given the non-mention. Been there, cota, too many times. image/smile.png' class='bbc_emoticon' alt=':)' />




    Didn't putt well today which normally isn't the case. Just nice to get out and play finally!




    I know how you feel... it's only been once a week rounds for me lately.



    RSI TP's are the other set that have my attention this year. Vapor Pros did not do it for me, but have the J15 CB's in the backup bag currently. They are easy, but the thicker soles have me concerned when the ground finally firms up here. I have been close (many times) to pulling the trigger on the RSI TP, but the "old" Nike tech in the VR PC's have been outstanding for me this year, and last year if I hadn't stupidly sold them on a whim.
    TaylorMade M4 8.5* - Aldila CopperHead X-Torsion 70TX
    TaylorMade M5 15* - Fuji Pro 2.0 Tour Spec
    TaylorMade GAPR LO 2 Iron - Nippon Modus Tour 105
    TaylorMade P7-TW 3-PW - Nippon Modus Tour 105
    TaylorMade Milled Grind Raw 54* & 60* - Nippon Modus 115 Wedge
    Scotty Cameron Phantom X 6 STR
  • KPH808KPH808 Participation Trophy ClubWRX Posts: 2,634 ClubWRX
    cota0429 wrote:

    cmb71 wrote:

    cota0429 wrote:


    Today I played 18. My son had a tournament this morning so I watched him all morning and got the bug to play. I am in the middle of a swing change and played decently. Shot 75 on a course that is 75/138 @ 7200 approx. Shot even par on the front. The RSi irons are pretty legit especially with the Modus 125x. I hit some shots that didn't feel too good swing wise but ended up pretty **** decent. I clanked a 189 yard 6 iron on the last hole that ended up 5 feet. 163 yard 7 iron floater into a gusty headwind that held its line beautifully to 5 feet. Shots that I know would have not turned out as good with the Vapor Pros. Also got to finally test my Engage 51, 55 square. I am in love with these wedges. I have to get the distance dialed in as I am not used to the extra spin. Seems like the added bounce hasn't effected play ability at all which was one of my concerns weakening the loft. Lastly the 915hd performed extremely well. Almost double eagled a par 5. Had 237 to the flag and hit the pin on a roll. I can't believe it didn't go in! Also had 227 uphill into a slight headwind didn't make great contact but the ball held its line well and I had 20 feet for birdie. When looking for the right clubs for me I always pay attention more to how good are my bad swings with the club. I think I like what I see with the 915hd and the RSi's at this point. Hit some great shots off the tee with the 915hd as well. Solid club. I could honestly go either way between this and the Cally right now. Going to keep it in the bag for now.




    But did you make the eagle? We all need to know. image/smile.png' class='bbc_emoticon' alt=':)' /> Nice round!




    I missed the 4 footer lol. Didn't read the break correctly. Not going to lie :/




    It's the putter....jk



    The RSi TPs sound solid, I'm thinking those or 714 AP2s.
    [font=arial,helvetica,sans-serif][font=times new roman,times,serif]Ping G400 LST 8.5* w/ Tensei Pro White 70 TX
    TM '17 M2 15* w/ Kurokage Dual Core 80 TX
    TM P790 UDI 2 w/ KBS Tour 130x
    Titleist 718 CB w/ KBS $ Taper 130x
    Fourteen Raw RM 22 50, 54, 58 w/ KBS 610 Tour Black Nickel
    Scotty Cameron Circle T Futura 6M
    [/font]
    [/font]
  • grumpy84grumpy84 Members Posts: 572 ✭✭
    cota0429 wrote:


    current progress pic on my M10 adjustable putter coming from Dave Billings at Machine Putters. Part of a test group. Needs to torch it and make the dot slightly bigger.



    sweet! Looks like it's going to be very similar to my putter.



    http://doglegright.com/wp-content/uploads/2013/02/MP_M10_303_Rainbow_T_RollTop_HBH_DLM_c.jpg
  • Beastmode BrokerBeastmode Broker Canadian AF Members Posts: 6,317 ✭✭
    uh oh, the RSI's made the signature

    they may stick around!!! image/smile.png' class='bbc_emoticon' alt=':)' />
    Taylormade M1 440 9.5 | Kuro Kage DC 60 X
    Taylormade M2 15 | RIP Alpha B 70 X
    Callaway XHP 20 | RIP Alpha 85 X
    Mizuno JPX 900T 4-PW | TI DGX100 ssx1
    Callaway MD3 RAW 52S / 56W | DGS300
    Nike Engage 60 TS | DGS300
    Taylormade Milled Collection Mullen 35"
  • GC70GC70 What's Next? ClubWRX Posts: 7,526 ✭✭
    cota0429 wrote:


    that 3w intrigues me .... ALOT

    keep us in the loop on that RIG




    for sure!


    MNNikeGuy wrote:


    Cota what head cover comes with the Japan version?




    sadly just the standard US version. My favorite Nike head cover for woods is the Vr Pro Pom ones. The red and white. I might just use that one still


    No questions about it the Pom LE covers rocked! I wad hoping they'd have a different cover.



    Off topic, what's your ball of choice?
    Cobra F9 8* Atmos Blue 6S
    XR Steelhead 15* Atmos Red 7S
    818 H1 Atmos Blue 8S
    Apex CF19 4-AW C-Taper Lite
    SM7's RAW 50F - 54S - 58M
    Nike 006 Paul Casey Proto (Oven)
    Nike 006 Rory Proto (Oven)
    Pro V1x / CSX

    WITB Link
  • cota0429cota0429 ClubWRX Posts: 3,508 ClubWRX
    KPH808 wrote:

    cota0429 wrote:

    cmb71 wrote:

    cota0429 wrote:


    Today I played 18. My son had a tournament this morning so I watched him all morning and got the bug to play. I am in the middle of a swing change and played decently. Shot 75 on a course that is 75/138 @ 7200 approx. Shot even par on the front. The RSi irons are pretty legit especially with the Modus 125x. I hit some shots that didn't feel too good swing wise but ended up pretty **** decent. I clanked a 189 yard 6 iron on the last hole that ended up 5 feet. 163 yard 7 iron floater into a gusty headwind that held its line beautifully to 5 feet. Shots that I know would have not turned out as good with the Vapor Pros. Also got to finally test my Engage 51, 55 square. I am in love with these wedges. I have to get the distance dialed in as I am not used to the extra spin. Seems like the added bounce hasn't effected play ability at all which was one of my concerns weakening the loft. Lastly the 915hd performed extremely well. Almost double eagled a par 5. Had 237 to the flag and hit the pin on a roll. I can't believe it didn't go in! Also had 227 uphill into a slight headwind didn't make great contact but the ball held its line well and I had 20 feet for birdie. When looking for the right clubs for me I always pay attention more to how good are my bad swings with the club. I think I like what I see with the 915hd and the RSi's at this point. Hit some great shots off the tee with the 915hd as well. Solid club. I could honestly go either way between this and the Cally right now. Going to keep it in the bag for now.




    But did you make the eagle? We all need to know. image/smile.png' class='bbc_emoticon' alt=':)' /> Nice round!




    I missed the 4 footer lol. Didn't read the break correctly. Not going to lie :/




    It's the putter....jk



    The RSi TPs sound solid, I'm thinking those or 714 AP2s.




    haha. Right to left downhill... just me



    The Ap2s are more point and shoot. One thing is when you miss with them they go exactly where you miss! lol Great club and I am looking forward to trying the 716 line!!!
    PING G400 LST Diamana LTD D+ 60 TX
    Callaway Rogue Diamana LTD D+ 80 TX
    Artisan VR Pro's by Mike Taylor X100 soft stepped TW Specs
    SM7 52F, 56M, Oven Green Dot Engage 60 TS
    TW Prototype 001

    WITB http://www.golfwrx.com/forums/topic/1183320-cota0429-nike-oven-baked-witb-52215/
  • cota0429cota0429 ClubWRX Posts: 3,508 ClubWRX
    grumpy84 wrote:

    cota0429 wrote:


    current progress pic on my M10 adjustable putter coming from Dave Billings at Machine Putters. Part of a test group. Needs to torch it and make the dot slightly bigger.



    sweet! Looks like it's going to be very similar to my putter.



    http://doglegright.c...p_HBH_DLM_c.jpg




    that looks clean! I have some updated photos I will post later today. I can't wait to roll it




    uh oh, the RSI's made the signature.

    they may stick around!!! image/smile.png' class='bbc_emoticon' alt=':)' />




    yep for now. I will get a few more rounds in with it then go back to the Vapors for a final choice
    PING G400 LST Diamana LTD D+ 60 TX
    Callaway Rogue Diamana LTD D+ 80 TX
    Artisan VR Pro's by Mike Taylor X100 soft stepped TW Specs
    SM7 52F, 56M, Oven Green Dot Engage 60 TS
    TW Prototype 001

    WITB http://www.golfwrx.com/forums/topic/1183320-cota0429-nike-oven-baked-witb-52215/
  • cota0429cota0429 ClubWRX Posts: 3,508 ClubWRX
    MNNikeGuy wrote:

    cota0429 wrote:


    that 3w intrigues me .... ALOT

    keep us in the loop on that RIG




    for sure!


    MNNikeGuy wrote:


    Cota what head cover comes with the Japan version?




    sadly just the standard US version. My favorite Nike head cover for woods is the Vr Pro Pom ones. The red and white. I might just use that one still


    No questions about it the Pom LE covers rocked! I wad hoping they'd have a different cover.



    Off topic, what's your ball of choice?




    going to order a set of Poms from JuJu. I hear great things about them.



    Titleist Pro V1x. Until Nike comes out with something like the RZN black but with a different cover (black dot) I won't switch. Not a fan of the retail RZN black or the Platinum.
    PING G400 LST Diamana LTD D+ 60 TX
    Callaway Rogue Diamana LTD D+ 80 TX
    Artisan VR Pro's by Mike Taylor X100 soft stepped TW Specs
    SM7 52F, 56M, Oven Green Dot Engage 60 TS
    TW Prototype 001

    WITB http://www.golfwrx.com/forums/topic/1183320-cota0429-nike-oven-baked-witb-52215/
  • cota0429cota0429 ClubWRX Posts: 3,508 ClubWRX
    PING G400 LST Diamana LTD D+ 60 TX
    Callaway Rogue Diamana LTD D+ 80 TX
    Artisan VR Pro's by Mike Taylor X100 soft stepped TW Specs
    SM7 52F, 56M, Oven Green Dot Engage 60 TS
    TW Prototype 001

    WITB http://www.golfwrx.com/forums/topic/1183320-cota0429-nike-oven-baked-witb-52215/
  • Makuakane_BearMakuakane_Bear Members Posts: 783 ✭✭
    cota0429 wrote:
    Today I played 18. My son had a tournament this morning so I watched him all morning and got the bug to play. I am in the middle of a swing change and played decently. Shot 75 on a course that is 75/138 @ 7200 approx. Shot even par on the front. The RSi irons are pretty legit especially with the Modus 125x. I hit some shots that didn't feel too good swing wise but ended up pretty **** decent. I clanked a 189 yard 6 iron on the last hole that ended up 5 feet. 163 yard 7 iron floater into a gusty headwind that held its line beautifully to 5 feet. Shots that I know would have not turned out as good with the Vapor Pros. Also got to finally test my Engage 51, 55 square. I am in love with these wedges. I have to get the distance dialed in as I am not used to the extra spin. Seems like the added bounce hasn't effected play ability at all which was one of my concerns weakening the loft. Lastly the 915hd performed extremely well. Almost double eagled a par 5. Had 237 to the flag and hit the pin on a roll. I can't believe it didn't go in! Also had 227 uphill into a slight headwind didn't make great contact but the ball held its line well and I had 20 feet for birdie. When looking for the right clubs for me I always pay attention more to how good are my bad swings with the club. I think I like what I see with the 915hd and the RSi's at this point. Hit some great shots off the tee with the 915hd as well. Solid club. I could honestly go either way between this and the Cally right now. Going to keep it in the bag for now.




    I just switched my Nike VPCs out for Ping S55s. Like you, the results of my bad swings are what swayed me. Congrats on all the new sticks. That M10 looks sick!!!
    [font=comic sans ms,cursive]Ping G400 LST, 10.6*, Aldila X-Torsion Copper Mamba, 60S
    Ping G400,14.5*, Alta CB65S[/font]

    [font=comic sans ms,cursive]Ping G410 Hybrid, 19*, Tour 85S / Cobra F6 Baffler, 17.5*, Matrix Red Tie 65Q4S
    Ping i200, (4-PW), DG S300
    Ping Glide Wedges-50* SS, 54*WS, 58*ES, DG Tour Issue S400
    Scotty Cameron Newport 2.5/ Bettinardi BB1 Tiki Limited Run
    Srixon Z-Star [/font]
  • YoYoJumboYoYoJumbo RaleighMembers Posts: 954 ✭✭
    Amazing stuff you got there!
    Rogue SZ
    TS3
    M3 hybrid
    P760s
    Vokeys
    ER5B
  • cota0429cota0429 ClubWRX Posts: 3,508 ClubWRX
    The Vapor Speed Limited from Japan is going to be delivered today! Wow that was quick. Too bad I'm not home until tomorrow. I hate when that happens!
    PING G400 LST Diamana LTD D+ 60 TX
    Callaway Rogue Diamana LTD D+ 80 TX
    Artisan VR Pro's by Mike Taylor X100 soft stepped TW Specs
    SM7 52F, 56M, Oven Green Dot Engage 60 TS
    TW Prototype 001

    WITB http://www.golfwrx.com/forums/topic/1183320-cota0429-nike-oven-baked-witb-52215/
  • cota0429cota0429 ClubWRX Posts: 3,508 ClubWRX
    **** GINA!



    PING G400 LST Diamana LTD D+ 60 TX
    Callaway Rogue Diamana LTD D+ 80 TX
    Artisan VR Pro's by Mike Taylor X100 soft stepped TW Specs
    SM7 52F, 56M, Oven Green Dot Engage 60 TS
    TW Prototype 001

    WITB http://www.golfwrx.com/forums/topic/1183320-cota0429-nike-oven-baked-witb-52215/
  • JC671JC671 Members Posts: 755
    Ouch! Did they even epoxy that thing?!

                                                                                                                WITB Link

  • cota0429cota0429 ClubWRX Posts: 3,508 ClubWRX
    cota0429 wrote:
    Today I played 18. My son had a tournament this morning so I watched him all morning and got the bug to play. I am in the middle of a swing change and played decently. Shot 75 on a course that is 75/138 @ 7200 approx. Shot even par on the front. The RSi irons are pretty legit especially with the Modus 125x. I hit some shots that didn't feel too good swing wise but ended up pretty **** decent. I clanked a 189 yard 6 iron on the last hole that ended up 5 feet. 163 yard 7 iron floater into a gusty headwind that held its line beautifully to 5 feet. Shots that I know would have not turned out as good with the Vapor Pros. Also got to finally test my Engage 51, 55 square. I am in love with these wedges. I have to get the distance dialed in as I am not used to the extra spin. Seems like the added bounce hasn't effected play ability at all which was one of my concerns weakening the loft. Lastly the 915hd performed extremely well. Almost double eagled a par 5. Had 237 to the flag and hit the pin on a roll. I can't believe it didn't go in! Also had 227 uphill into a slight headwind didn't make great contact but the ball held its line well and I had 20 feet for birdie. When looking for the right clubs for me I always pay attention more to how good are my bad swings with the club. I think I like what I see with the 915hd and the RSi's at this point. Hit some great shots off the tee with the 915hd as well. Solid club. I could honestly go either way between this and the Cally right now. Going to keep it in the bag for now.




    I just switched my Nike VPCs out for Ping S55s. Like you, the results of my bad swings are what swayed me. Congrats on all the new sticks. That M10 looks sick!!!




    I put the RSi in play yesterday and besides the head flying off they performed incredible. Hit a couple more shots that after I was surprised were on point!



    Waiting on them to hand polish it to turn it a little more gray. Thanks
    PING G400 LST Diamana LTD D+ 60 TX
    Callaway Rogue Diamana LTD D+ 80 TX
    Artisan VR Pro's by Mike Taylor X100 soft stepped TW Specs
    SM7 52F, 56M, Oven Green Dot Engage 60 TS
    TW Prototype 001

    WITB http://www.golfwrx.com/forums/topic/1183320-cota0429-nike-oven-baked-witb-52215/
  • cota0429cota0429 ClubWRX Posts: 3,508 ClubWRX
    JC671 wrote:
    Ouch! Did they even epoxy that thing?!




    I bought it on BST...going to have them all checked out. Cost me a few strokes yesterday.
    PING G400 LST Diamana LTD D+ 60 TX
    Callaway Rogue Diamana LTD D+ 80 TX
    Artisan VR Pro's by Mike Taylor X100 soft stepped TW Specs
    SM7 52F, 56M, Oven Green Dot Engage 60 TS
    TW Prototype 001

    WITB http://www.golfwrx.com/forums/topic/1183320-cota0429-nike-oven-baked-witb-52215/
Sign In or Register to comment.