My first custom Byron -- order placed 6/30/2016

had to share the excitement - just got done finalizing the design with Steve; deposit made. ETA 6 weeks.

she's going to be:

615 Tri-Sole (American Stainless)

Welded Long Neck

Full-Shaft Offset

73* Lie

3* Loft

35.5" Length

350g Weight

Deep Tuna Mill

Sight Dot on topline (Gold Paintfill)

Finish will be polished blue oil on the neck/sole/face; brushed blue oil on the top/cavity

(1) Tour Dot on the face by the heel (Robin's Egg/Tiffany Paintfill)

"BYRON" in the cavity with special stamping (White Paintfill)

"Byron & Co." stamping around the tour dot on the face (Gold Paintfill)

Naked Sole

Black Leather Stitchback Grip

Robins' Egg / Black Embroidered magnetic closure cover

**7/21/16 Update** -- well, won't lie, I'm pretty bummed. Just got off the phone with Steve to hear that the welder isn't around till August 1st. My Byron hasn't even been started yet. Tryin to stay positive, was hoping to have it for beginning of August for our club championship - now i'm just hoping to get it before the month of August is over.

**8/15/16 Update** -- just spoke to Steve, apparently mine is one of many that are getting welded shortly. may the bumming continue. Steve wasn't in the office so, he said he'll get back to me with a better idea of timeframe since he couldn't give me much more than "let's just say we're getting closer" via text...so, i'll just sit back, sigh and wait. 7 weeks in.

**8/20/2016 Update** -- spoke with Byron and Steve, putter is getting finished up and shipped/delivered this week. But, Byron sent me some pics and its flat out, gorgeous.

Design looks good, definitely share the finished product. That wait will feel like an eternity, but it will be worth it (welcome to the club)! :good:

Design looks good, definitely share the finished product. That wait will feel like an eternity, but it will be worth it (welcome to the club)! :good:

Thanks ! Yea the wait will be long but, it'll be my gamer. Just need some transparent protection tape for the sole...

Looks really good. Can't wait to see it.

Looks really good. Can't wait to see it.

I love what you did with the lettering in the cavity. Very creative!

Looks like it'll be a beauty.

Add a sound slot and ship it to my house! ;)

Looks like it'll be a beauty.

 

Add a sound slot and ship it to my house! ;)

Hahaha

7/21/16 - updated added to first post

Bummer about the delay but it will be worth the wait. Looks like it's going to be a beautiful putter.

Bummer about the delay but it will be worth the wait. Looks like it's going to be a beautiful putter.

i sure hope so -- Steve said the same thing actually

Bummer. Things like this seem to be a bit more frequent than usual. Welder out, machine shop late with orders, outsourced finish delays etc.

I've been waiting since Thanksgiving for my copper plated DH89 to be re-plated (original plating had an issue).

I know that it's a bummer when the stick is delayed... it's gonna be awesome though when it get's here! Gio best of luck my friend!

-EA

Bummer. Things like this seem to be a bit more frequent than usual. Welder out, machine shop late with orders, outsourced finish delays etc.

 

I've been waiting since Thanksgiving for my copper plated DH89 to be re-plated (original plating had an issue).

Wait, what? Thanksgiving!?

Bummer. Things like this seem to be a bit more frequent than usual. Welder out, machine shop late with orders, outsourced finish delays etc.

 

I've been waiting since Thanksgiving for my copper plated DH89 to be re-plated (original plating had an issue).

I know that it's a bummer when the stick is delayed... it's gonna be awesome though when it get's here! Gio best of luck my friend!

 

-EA

Nice design Gio!! Too bad about the delay though. I'm sure it'll be worth it.

What is the difference between the 615 and the other 6s?

Nice design Gio!! Too bad about the delay though. I'm sure it'll be worth it.

 

What is the difference between the 615 and the other 6s?

Cool. The shape looks really good. I love the shape of DJs putter with the short heel and softened bumpers. Rounded corners look so good behind the ball to me.

Bummer. Things like this seem to be a bit more frequent than usual. Welder out, machine shop late with orders, outsourced finish delays etc.

 

I've been waiting since Thanksgiving for my copper plated DH89 to be re-plated (original plating had an issue).

are u kidding me???

 

I know that it's a bummer when the stick is delayed... it's gonna be awesome though when it get's here! Gio best of luck my friend!

 

-EA

i sure hope so -

Im with you pal. Ordered on June 3 and also still patiently waiting. I am sure she will have curves in all the right places when she gets here.

Bummer. Things like this seem to be a bit more frequent than usual. Welder out, machine shop late with orders, outsourced finish delays etc.

 

I've been waiting since Thanksgiving for my copper plated DH89 to be re-plated (original plating had an issue).

 

Wait, what? Thanksgiving!?

Yup :(

Don't want to thread jack, so I'll just say it isn't all on Byron. He's actually been great about the whole delay.

Any time you order a putter that gets plating... mystic, copper etc. It's usually a good bit longer of a wait time. Unless your order is on the tail end of when a batch gets sent in. Usually Byron will have the work done on the putter and then it will wait for weeks to get the plating. Feel free to reach out to me with your frustrations and I'll try my best to see that you get answers. I promise they're worth the wait. I waited 15 mos on a handmade damascus in 2014. :)

Any time you order a putter that gets plating... mystic, copper etc. It's usually a good bit longer of a wait time. Unless your order is on the tail end of when a batch gets sent in. Usually Byron will have the work done on the putter and then it will wait for weeks to get the plating. Feel free to reach out to me with your frustrations and I'll try my best to see that you get answers. I promise they're worth the wait. I waited 15 mos on a handmade damascus in 2014. :)

Eddie - i don't have any plating on mine -- just blue oil.

i'd assume all the other work can be done in a decent amount of time, no? i was hoping to roll this at some point in august -- my birthday was pushing it (august 4th) obviously but, would be nice to roll her on decent grass before the fall comes.

First post updated with limited info. sigh.

First post updated with limited info. sigh.

Mine just arrived this morning. Waited a total of just about 10 weeks. I'm sure it will arrive soon!

First post updated with limited info. sigh.

 

Mine just arrived this morning. Waited a total of just about 10 weeks. I'm sure it will arrive soon!

he offer any discount for going over the time estimated? i mean, why sugar coat it knowing it's going to take longer? i mean, don't tell people 4-6 weeks KNOWING it's going to take at least 8-10...?

First post updated with limited info. sigh.

 

Mine just arrived this morning. Waited a total of just about 10 weeks. I'm sure it will arrive soon!

 

he offer any discount for going over the time estimated? i mean, why sugar coat it knowing it's going to take longer? i mean, don't tell people 4-6 weeks KNOWING it's going to take at least 8-10...?

Nope. Although, looking through the correspondence, I was never specifically given an estimate (despite asking at one point). It wasn't something I was pressing them for.

First post updated with limited info. sigh.

 

Mine just arrived this morning. Waited a total of just about 10 weeks. I'm sure it will arrive soon!

 

he offer any discount for going over the time estimated? i mean, why sugar coat it knowing it's going to take longer? i mean, don't tell people 4-6 weeks KNOWING it's going to take at least 8-10...?

 

Nope. Although, looking through the correspondence, I was never specifically given an estimate (despite asking at one point). It wasn't something I was pressing them for.

ah i gotcha. might be why Steve is so hesitant to give me a revised ETA. initial estimate is clearly out of the water. won't lie, it was between this and a custom damascus lajosi -- i got this as a gift so, you can understand my eagerness to get my hands on it. (can count on one hand how many times in my life i've been fortunate enough to own something so nice, handmade just for me, of significant value -- golf clubs or not)

As someone that sells Byrons work....Byron cranks them as fast as he can. Sometimes it's as little as 4 weeks sometimes longer. It's always worth the wait. Byron is a one man operation, every stamp every letter of paintfill done by him. He makes hundreds and hundreds of putters a year. It's always worth it, I promise. Hang in there. -EA

But if Byron's shop is one man show, how come his welder is not available? If that was the reason for the delay in the first place.

I thought Byron did all the welding?