***ATTENTION***IMPORTANT ANNOUNCEMENT***ATTENTION***IMPORTANT ANNOUNCEMENT***ATTENTION***

Update 8/14 - ***Migration work continues. Estimate Go Live to new board 8/17***

Last year, in an effort to improve the capability of our forums, we switched to new software. We expected tremendous scalability and rapid customization that would significantly improve each Member's experience across multiple devices and integrate flawlessly with social media platforms.

Unfortunately, after a significant capital expense, we have decided that the length of time and the additional cost to reach our goals make this enterprise untenable.

Thus, we have made the difficult decision to transition the forums to our original software platform. We’re excited that, in the nearly two years since we began the process of our most recent switch, our original platform has been upgraded significantly, and we are confident that the reversion will not only provide the stability that we desperately needed prior to our last move but will also return to the Membership the high level of customization that made our online community so great. We have also added technical resources to the GolfWRX staff that will allow us to build custom modules and modifications that we are confident will take the forums to the next level.

We remain the world's largest online golf community, and we still hold true to our core values and mission statement as written in 2005. Bearing both of those elements in mind, being the best and offering our Members a platform that is world-class are both requirements, not options, and it is that spirit that has motivated this decision.

So, please pardon our mess over the next five days or so while we transition the forums.

A few important notes: Current content will be accessible during that time, but the forums will be READ ONLY, and you will not be able to start new threads or reply to posts. Personal Messaging is enabled but PMs sent/received from the time the board was frozen will not carry over. We know this is inconvenient, and we apologize, and we greatly appreciate GolfWRXers bearing with us through the transition.

We are very excited about starting this next chapter for GolfWRX and getting back to the high-quality Member experience we all expect as soon as possible.

Scotty Tip Size

 CK2131 ·  
CK2131CK2131 Banned  237WRX Points: 1Posts: 237 Bunkers
Joined:  in Putters #1
Anyone know what size shaft a Scotty Studio Stainless Newport would take?
Posted:
1

Comments

  • acy274acy274 Members  745WRX Points: 4Posts: 745 Golden Tee
    Joined:  #2
    Sorry I can't answer your question, but I feel like the thread title and post deserve an obligatory... <img src='http://www.golfwrx.com/forums/public/style_emoticons/<#EMO_DIR#>/smile.png' class='bbc_emoticon' alt=':)' /><br />
    <br />
    giphy.gif
    Posted:
  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • jtitleist12jtitleist12 Members  3149WRX Points: 249Posts: 3,149 Titanium Tees
    Joined:  #3
    All Cameron in-hosel plumbers neck shafts are .355 taper tip. <br />
    <br />
    - Josh
    Posted:
  • CK2131CK2131 Banned  237WRX Points: 1Posts: 237 Bunkers
    Joined:  #4
    Emailed Scotty to confirm and the customer service rep came back that they don't publicly disclose what the shaft measurements are that fit the putters....?? Is it just me or does that seem kind of ridiculous? Like guys i just want to put a new shaft in my putter and need to know what fits, not looking for the blueprints to his tour collections....
    Posted:
  • VNutzVNutz Members  6867WRX Points: 787Posts: 6,867 Titanium Tees
    Joined:  #5
    <br />
    All Cameron in-hosel plumbers neck shafts are .355 taper tip.<br />
    <br />
    - Josh<br />
    <br />
    <br />
    Except for the Mid Surs designed for mid and long playing lengths that are 370 tip.
    Posted:
  • JustChillJustChill Members  464WRX Points: 47Handicap: 4.9Posts: 464 Greens
    Joined:  #6
    Studio Stainless is .355 <br />
    <br />
    I put a new shaft in mine the other day and that was the correct size. Dont know why the CS person wouldnt tell you. That's odd
    Posted:
    Titleist 910D3 9.5*, Aldila Rogue Silver 60 X
    Titleist 910fd 16.5* Mitsubishi Diamana S+ 82 X
    Titleist 910h 19*, Mitsubishi Diamana Ahina 90HYB S
    Adams CMB, DG AMT S300
    Titleist SM5 50-54-58, DG Wedge
    Toulon Memphis
  • CK2131CK2131 Banned  237WRX Points: 1Posts: 237 Bunkers
    Joined:  #7
    JustChill wrote:
    <br />
    Studio Stainless is .355 <br />
    <br />
    I put a new shaft in mine the other day and that was the correct size. Dont know why the CS person wouldnt tell you. That's odd<br />
    <br />
    <br />
    My guess is he was trying to push me towards sending it in to the Custom Shop.<br />
    <br />
    You used the .355 taper tip I'm assuming?<br />
    <br />
    Thanks
    Posted:
  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • JustChillJustChill Members  464WRX Points: 47Handicap: 4.9Posts: 464 Greens
    Joined:  #8
    CK2131 wrote:
    <br />
    JustChill wrote:
    <br />
    Studio Stainless is .355 <br />
    <br />
    I put a new shaft in mine the other day and that was the correct size. Dont know why the CS person wouldnt tell you. That's odd<br />
    <br />
    <br />
    My guess is he was trying to push me towards sending it in to the Custom Shop.<br />
    <br />
    You used the .355 taper tip I'm assuming?<br />
    <br />
    Thanks<br />
    <br />
    I used this specifically: https://www.golfworks.com/true-temper-straight-taper-steel-putter-shafts/p/YST/ <br />
    <br />
    The first option
    Posted:
    Titleist 910D3 9.5*, Aldila Rogue Silver 60 X
    Titleist 910fd 16.5* Mitsubishi Diamana S+ 82 X
    Titleist 910h 19*, Mitsubishi Diamana Ahina 90HYB S
    Adams CMB, DG AMT S300
    Titleist SM5 50-54-58, DG Wedge
    Toulon Memphis
  • MCCAMCCA Members  2883WRX Points: 145Posts: 2,883 Titanium Tees
    Joined:  #9
    JustChill wrote:
    <br />
    CK2131 wrote:
    <br />
    JustChill wrote:
    <br />
    Studio Stainless is .355 <br />
    <br />
    I put a new shaft in mine the other day and that was the correct size. Dont know why the CS person wouldnt tell you. That's odd<br />
    <br />
    <br />
    My guess is he was trying to push me towards sending it in to the Custom Shop.<br />
    <br />
    You used the .355 taper tip I'm assuming?<br />
    <br />
    Thanks<br />
    <br />
    I used this specifically: https://www.golfwork...shafts/p/YST/ <br />
    <br />
    The first option<br />
    <br />
    <br />
    Yep<br />
    <br />
    .355 taper installed a project x 6.0 i purchased from golf galaxy (new in one of there close out shaft bins for $3.99) glued it cut it to 34" perfect fit.
    Posted:
  • zzyzxx33zzyzxx33 Members  1181WRX Points: 153Posts: 1,181 Platinum Tees
    Joined:  #10
    A few years ago Cameron started to getting their shafts from Japan and from what I have read it is a propitiatory size. So, that is why they would not tell you. Why they would do this I don't have a good answer other than because they can.
    Posted:
  • jtitleist12jtitleist12 Members  3149WRX Points: 249Posts: 3,149 Titanium Tees
    Joined:  #11
    zzyzxx33 wrote:
    <br />
    A few years ago Cameron started to getting their shafts from Japan and from what I have read it is a propitiatory size. So, that is why they would not tell you. Why they would do this I don't have a good answer other than because they can.<br />
    <br />
    <br />
    There is nothing proprietary about .355 taper tip shafts. Golfworks sells the exact same True Temper stepless shaft Cameron used for years for $10.<br />
    <br />
    - Josh
    Posted:
  • zzyzxx33zzyzxx33 Members  1181WRX Points: 153Posts: 1,181 Platinum Tees
    Joined:  edited Feb 13, 2017 #12
    <br />
    zzyzxx33 wrote:
    <br />
    A few years ago Cameron started to getting their shafts from Japan and from what I have read it is a propitiatory size. So, that is why they would not tell you. Why they would do this I don't have a good answer other than because they can.<br />
    <br />
    <br />
    There is nothing proprietary about .355 taper tip shafts. Golfworks sells the exact same True Temper stepless shaft Cameron used for years for $10.<br />
    <br />
    - Josh<br />
    <br />
    <br />
    Cameron no longer uses True Temper shafts in his Newer Lines as previously stated. Cameron uses Nippon shafts. The Black Newport 1.5s use a proprietary size made only for Cameron.
    Posted:
  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • VNutzVNutz Members  6867WRX Points: 787Posts: 6,867 Titanium Tees
    Joined:  #13
    The flow necks use a proprietary shaft, plumbers necks are unchanged.
    Posted:
  • zzyzxx33zzyzxx33 Members  1181WRX Points: 153Posts: 1,181 Platinum Tees
    Joined:  #14
    VNutz wrote:
    <br />
    The flow necks use a proprietary shaft, plumbers necks are unchanged.<br />
    <br />
    <br />
    Thanks for the clarification. I was almost right about something today.
    Posted:
  • BeCu_PingBeCu_Ping BeCu Members  195WRX Points: 60Posts: 195 Fairways
    Joined:  #15
    For that model (pending neck style), the plumbers neck style is most likely (based on my experience w/plumbers neck models) is .355. As others have noted, the UST is a good one and available from GolfWorks, etc.
    Posted:
  • RangerVRangerV My ProV’s are frozen Members  203WRX Points: 40Posts: 203 Fairways
    Joined:  #16

    Gonna jump back in on this since I got the same response from Cameron when I emailed.
    I want to reshaft a Scotty Select GoLo 5. I've read a few places that it might be a .370".
    Anybody done any work on these before?

    Posted:
    TM M3 w/ Diamana Whiteboard 73X
    TM M2 Tour 3HL w/ Diamana Blueboard 83X
    Mizuno Mp FliHi Cut Muscle w/ GD Tour AD 95X
    Mizuno Mp59 w/ TI DG X100
    Titleist Vokey SM7 Brushed Steel 50/55/60 w/ TI DG S400
    Ping Vault 2.0 Stealth Anser
  • jtitleist12jtitleist12 Members  3149WRX Points: 249Posts: 3,149 Titanium Tees
    Joined:  #17

    GoLo 5 is a .355 single bend shaft.

    Posted:
  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • pxthreepxthree Members  109WRX Points: 63Handicap: 15.6Posts: 109 Fairways
    Joined:  #18

    Anyone know the shaft specs for a 2016 notchback?

    Posted:

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.