Dear Taylormade: This is getting ridiculous - 7 cracked M2 series woods (3 drivers 4 3woods)

xabiaxabia Members Posts: 1,828 ✭✭
edited Apr 15, 2019 1:27am in WRX Club Techs #1
Let me preface this by saying the 2016 M series driver and HL 3 wood are the BEST clubs I have ever hit. I have tried to replace them with something else, but they are always what I come back to. However I have now had 5 cracked clubs since 9/22/16 (so approximately one calendar year). I certainly play a lot of golf, but I am a good player (~4-5 cap), swing hard and fast but do not miss low or slam my clubs into the ground. Also my club has pretty nice range balls, not rocks.



Over the last calendar year these clubs have all cracked on me



1st one 9/22/2016; M2 3 wood 15*: face caved in completely after contact (no picture but it was obliterated)



2nd one 5/31/17: Tour Issue M2 3 HL: Hit a ball flush it made a 90 degree turn in the air after about 100 yards and went 40 yards O.B. looked down and saw this



37477575611_ee17aa4064_k.jpg20170530_200911 by James Cole, on Flickr



3rd one cracked on 7/15/17 2016 M2 driver : crack in sole near speed pocket. I had this club for over a year and had hit a ton of balls with it. Chalked it up to bad luck and moved on (no picture no hard feelings)



4th one cracked on September 10th: Tour Issue M2 3HL deep face (bought from BST this July). Played ~ 25 rounds with it and range time. Completely shocked this one cracked.



36768497924_4f71fc7cf6_k.jpg20171003_114247



5th one cracked 10/2/17: 2016 M2 driver (bought on BST in early September and was virtually new) have played about 10 rounds with it and then looked down yesterday and saw this after a funny sounding shot.



37477534341_bb412f9984_k.jpg20171002_082304





Two of these pictures were taken right after impact so the clubs are somewhat dirty, but I repeat that I am not abusive to my clubs nor do I feel like I should be having these kinds of issues. In fact I have two ping anser hybrids that I hit a TON of balls with (17* and 20*) that have not even come close to having issues after around 2 years for the 17 and 1 for the 20. Before this I had a super tri that I had an incalculable number of balls with (when I was terrible and hit all over the clubface) that had no issues.



I am not trying to bash Taylormade, but this is kind of crazy right? Has anyone else had this many or any issues with 2016 M series woods?
Post edited by xabia on
Mayfield Sand Ridge CC
TI M2 Tensei Orange V3 60TX
TI M2 Tensei Blue 70TX / M4 Atmos 7 stiff / CBX HC Evenflow Black 75X
T1 M2 16.5 Speeder Evo 3 7X
Mizuno MMC Fli Hi 3 iron Diamana D+ 90X / Ping Anser 20* oban kiyoshi white
MP 18 MB 4-PW Ctaper Lite 110 stiff
Scratch 53 / Vokey SM7 Raw 56* / SM7 60D Raw
Odyssey Jalibird Mini 33"
«1

Comments

  • vwgolfervwgolfer Posts: 1,962 ✭✭
    OUCH!
    F8 attas cool
    F8 3w. attas 3
    F6 hybrid. vts silver
    Z565. recoil 95
    Pur wedges
    Piretti Matera
  • JwowzerJwowzer Members Posts: 319
    Have you tried reaching out to Taylormade customer service on any of them? They are typically happy to replace them.
    917D3 8.5* Atmos Blue 6X
    917F2 15* Motore Speeder 7.2 X
    915Hd 20.5* Rogue Black 85 S
    716 AP2 4-PW Project X LZ 5.5 tipped .5"
    Vokey SM6 50.12* F, TVD 54* K 58* K
    Bettinardi Kuchar Model 2 KBS Tour Custom Black/Blue 34"
  • BookerBooker Members Posts: 719 ✭✭
    I broke two m2 9.5 driver heads and 1 2016 3wood. The 3 wood they sent me the 17 model. I took a shop credit for it. This was all within 3months. Also had an epic crack after 10 days.
  • mcc0819mcc0819 Members Posts: 589 ✭✭
    I've gone through 2 of the 16 m2 3 woods. They perform great but absolute terrible quality and design for it to crack so easily.
    Ping G400 LST AD-DI 7x
    Callaway Epic Flash SZ 3w HZRDUS Smoke 80 6.5
    Callaway Rogue 5w HZRDUS Black 76 6.5
    Ping i200 4-pw DG X100
    Ping Glide 2.0 50, 54, 58
    Odyssey O-Works 1w

  • jgroganjgrogan Just another hacker!! Members Posts: 176 ✭✭
    I have cracked 3 2016 m2 drivers. Taylor made has replaced them all under warranty. I have since changed from taylormade. I know all have there problems but it is ridiculous. I play tournament golf and to sit there and wonder is it going to crack in play. There is more then just those problems I have had with Taylormade. Me and my son both played them. Not any longer
  • ChipNRunChipNRun Members Posts: 1,169 ✭✭
    A friend of mine cracked the head on a new Callaway GBB Epic 3W.



    I'm wondering if golfdom has reached the limit on thinner and lighter clubhead materials. Maybe durability issues are starting to appear with recent designs.



    Five years ago I would hear of golfers cracking driver heads after a couple of years, but not during Year 1, and would rarely hear of broken FW heads.
    What's In The Bag *...

    Driver: Calla XR16 Pro 10.5° (set open) / Fuji Evolution II TS Speeder 665 R-flex 63 gr.
    FWs: Tour Edge XRail 4W + 7W / GraphiteDesign G60 R-flex 60 gr.
    or Calla Alpha 815, set 16° + 20° / Fuji Motore Speeder 665 R-flex 62 gr.
    Hybrid: Cobra FlyZ 3H 19° + 4H 22° / Matrix VLCT Altus Lite flex 73 gr.
    Irons: Tour Edge CB Pro Tungsten 4i - PW** / KBS Tour 90 R-flex 95 gr. (As of 21 Nov 2018)
    Wedge: Calla MD3 48°/8.SS + 54°/12.WS +
    MD.PM 60°/10 / KBS Tour R-flex 110 gr. |
    Putter: Slotline Inertial SL-583F / 34" w. SuperStroke 2.0 MidSlim grip
    Bag: Sun Mountain Three 5 stand bag
    Ball: Calla SuperSoft
    * Either 7W or 3H left out, depending on course.
    ** Wedges: 46°and 48°are competing for bag space.
  • anthanth From the Land Down Under Members Posts: 2,760 ✭✭
    Do you ever hit balls from the mats at the Driving Range?
    Callaway Rogue 10.5
    Callaway BB Alpha 816 16
    Srixon Z H45 19 Hybrid
    Srixon Z U45 23 Utility
    Srixon Z 765/965 5 - PW
    TaylorMade Milled Grind 50 & 54
    TaylorMade Milled Grind Hi Toe 58
    TaylorMade Spider Tour Red
    TaylorMade TP5
  • xabiaxabia Members Posts: 1,828 ✭✭
    with a 3 wood yes, but I am not slamming my club into the ground first. Nor is that outlandish behavior that should doom me to cracked club faces.



    In regards to replacements they can't help me I'm told because I didn't buy the club through an authorized retailer, but instead through the BST.
    Mayfield Sand Ridge CC
    TI M2 Tensei Orange V3 60TX
    TI M2 Tensei Blue 70TX / M4 Atmos 7 stiff / CBX HC Evenflow Black 75X
    T1 M2 16.5 Speeder Evo 3 7X
    Mizuno MMC Fli Hi 3 iron Diamana D+ 90X / Ping Anser 20* oban kiyoshi white
    MP 18 MB 4-PW Ctaper Lite 110 stiff
    Scratch 53 / Vokey SM7 Raw 56* / SM7 60D Raw
    Odyssey Jalibird Mini 33"
  • burns9304burns9304 Members Posts: 332 ✭✭
    xabia wrote:


    with a 3 wood yes, but I am not slamming my club into the ground first. Nor is that outlandish behavior that should doom me to cracked club faces.



    In regards to replacements they can't help me I'm told because I didn't buy the club through an authorized retailer, but instead through the BST.


    They won't ask for a receipt. They will replace the non-tour issue stuff with out much hassle.
    TaylorMade M3 460 9.5* Graphite Design Tour IZ 6X
    TaylorMade M3 16* Graphite Design Tour IZ 7X
    Titleist 818 H2 19* Graphite Design Tour IZ 95X
    PXG 0311T 4-PW Matrix Program F15 120TX
    Titleist Vokey SM7 Raw 50*S, 54*M, 58*M Nippon Modus 125X
    Bettinardi BB0 Flow DASS
  • Dhurley7Dhurley7 Members Posts: 389 ✭✭
    Wow, that sucks. I have been gaming my 2016 m2 driver and 3w for the same amount of time and haven't had any issues at all. I have played somewhere around 90 rounds with them plus a decent amount of range time. The range balls at our club are limited flight so maybe that has worked in my favor. Driver swing speed is 110-115. Now I am worried that it's a matter of time before I have the same issues.



    Let us know if you're able to get a replacement through TM.
  • pearsonifiedpearsonified Extreme enthusiast Members Posts: 1,791 ✭✭
    The sole in front of the speed slot is where these clubs tend to crack.



    My cousin swings it about 115mph, and he's cracked two 2016 M2s in the past year. Here's the deal, though—he misses the ball low on the face a lot.



    I have a similar SS, and although I haven't cracked an M2 yet, I've cracked an AeroBurner in a manner nearly identical to some of the pictures here. I tend to strike my drives higher on the face, so perhaps that's why I've not been snakebit quite as badly by the speed slot.



    At this point, I just think the material stress is too high where the sole meets the face (in between the speed slot and the face), especially on strikes that occur below the CoG.
    Callaway Rogue 9.5º •• Project X HZRDUS Yellow 75 6.5
    TM 2016 M2 3HL 16.5º •• Aldila NV 2KXV Orange 65x
    Callaway Apex 20º •• Project X EvenFlow Black Hybrid 6.5
    Mizuno MP-18 MMC Fli-Hi 4 (22º) •• Paderson IMRT KG95-IRT30
    Adams CMB 5-P (27º-46º) •• DG TI S400
    TM MG 50º/9º •• Project X LZ 5.5
    TM MG 54º/11º •• DG Wedge
    TM ATV Grind Tour Spin 60º •• KBS 105 Wedge
    Odyssey Versa 330M BWB 34"

    For sale:
    Tour-only Cleveland 588 CB 4-P with PX 6.5

    2018 Tournament Index: 2.56 (see results)
    2018 Tournament Anti: 7.76

    Current anti-handicap: 4.7
  • This have anything to do with strike location? Wonder if this is a combo of higher club speed and poor ball striking.
  • LittleLeftToRightLittleLeftToRight Turn that frown upside down! Posts: 2,036 ✭✭
    Three letters for you. T.E.E.



    It is terrible that is happening to you. If that were me I would swear off the manufacturer for good.
    [font=georgia,serif]Cobra Bio Cell Pro 8.5º Aldila Black Mamba 60TX T1"[/font]

    [font=georgia, serif]Tour Edge Exotics CB4 16.5º Oban Devotion 8/05 T1.5"[/font]

    [font=georgia, serif]Tommy Armour "Heater" 14º DI Aldila Rip Tour X[/font]

    [font=georgia, serif]Srixon I-701 Tour TT Black Gold X 3-PW[/font]

    [font=georgia,serif]Callaway Jaws CC 50º/54º/58 PX 6.5
    Hogan P131[/font]
  • xabiaxabia Members Posts: 1,828 ✭✭
    tarmactrr wrote:


    This have anything to do with strike location? Wonder if this is a combo of higher club speed and poor ball striking.




    I do miss low more than I miss high, but looking at those two pictures of the 3 woods the cracks are in the dead center of the face. I would say I am not a poor ball striker at all but occasionally do miss low

    Dhurley7 wrote:


    Wow, that sucks. I have been gaming my 2016 m2 driver and 3w for the same amount of time and haven't had any issues at all. I have played somewhere around 90 rounds with them plus a decent amount of range time. The range balls at our club are limited flight so maybe that has worked in my favor. Driver swing speed is 110-115. Now I am worried that it's a matter of time before I have the same issues.



    Let us know if you're able to get a replacement through TM.




    I have been rejected by TM customer service for a replacement due to not having a receipt.
    Mayfield Sand Ridge CC
    TI M2 Tensei Orange V3 60TX
    TI M2 Tensei Blue 70TX / M4 Atmos 7 stiff / CBX HC Evenflow Black 75X
    T1 M2 16.5 Speeder Evo 3 7X
    Mizuno MMC Fli Hi 3 iron Diamana D+ 90X / Ping Anser 20* oban kiyoshi white
    MP 18 MB 4-PW Ctaper Lite 110 stiff
    Scratch 53 / Vokey SM7 Raw 56* / SM7 60D Raw
    Odyssey Jalibird Mini 33"
  • pearsonifiedpearsonified Extreme enthusiast Members Posts: 1,791 ✭✭
    Three letters for you. T.E.E.


    I absolutely love their stuff, but I've cratered the face of two of their 3-woods in the last 2 years.



    That said, I do think the M-series is more prone to cracking than other models I've hit.
    Callaway Rogue 9.5º •• Project X HZRDUS Yellow 75 6.5
    TM 2016 M2 3HL 16.5º •• Aldila NV 2KXV Orange 65x
    Callaway Apex 20º •• Project X EvenFlow Black Hybrid 6.5
    Mizuno MP-18 MMC Fli-Hi 4 (22º) •• Paderson IMRT KG95-IRT30
    Adams CMB 5-P (27º-46º) •• DG TI S400
    TM MG 50º/9º •• Project X LZ 5.5
    TM MG 54º/11º •• DG Wedge
    TM ATV Grind Tour Spin 60º •• KBS 105 Wedge
    Odyssey Versa 330M BWB 34"

    For sale:
    Tour-only Cleveland 588 CB 4-P with PX 6.5

    2018 Tournament Index: 2.56 (see results)
    2018 Tournament Anti: 7.76

    Current anti-handicap: 4.7
  • xabiaxabia Members Posts: 1,828 ✭✭
    edited Aug 1, 2018 #17
    update:



    crack on sole along speed slot with a brand new TI 16 M2 that I have used since March. I do swing hard (unfortunately too hard) and miss low on the face when I do miss, but I am at my wits end.
    Mayfield Sand Ridge CC
    TI M2 Tensei Orange V3 60TX
    TI M2 Tensei Blue 70TX / M4 Atmos 7 stiff / CBX HC Evenflow Black 75X
    T1 M2 16.5 Speeder Evo 3 7X
    Mizuno MMC Fli Hi 3 iron Diamana D+ 90X / Ping Anser 20* oban kiyoshi white
    MP 18 MB 4-PW Ctaper Lite 110 stiff
    Scratch 53 / Vokey SM7 Raw 56* / SM7 60D Raw
    Odyssey Jalibird Mini 33"
  • xabiaxabia Members Posts: 1,828 ✭✭
    edited Apr 15, 2019 1:22am #18

    And another two to add to the list
    TI M2 3Wood

    TI M2 3HL

    that's 7!

    Mayfield Sand Ridge CC
    TI M2 Tensei Orange V3 60TX
    TI M2 Tensei Blue 70TX / M4 Atmos 7 stiff / CBX HC Evenflow Black 75X
    T1 M2 16.5 Speeder Evo 3 7X
    Mizuno MMC Fli Hi 3 iron Diamana D+ 90X / Ping Anser 20* oban kiyoshi white
    MP 18 MB 4-PW Ctaper Lite 110 stiff
    Scratch 53 / Vokey SM7 Raw 56* / SM7 60D Raw
    Odyssey Jalibird Mini 33"
  • gioguy21gioguy21 NJMembers Posts: 7,104 ✭✭

    i have an idea -- choose another OEM/club.

    Tour Issue 2017 M1 460 9.2* / Rogue 130 Silver 70TX (tipped 3/4", set STD)
    Epic Flash SZ 3+ / Diamana DF 70TX (tipped 1")
    Epic Flash 5 / Diamana BF 90TX (tipped 1.75")
    785 3-PW/ PX 7.0 (+1/2", 2*up, 2* weak)
    RTX4 52*, 58* (bent 1* weak)/ DG TI S400 (+1/2", 2*up)
    SC Kombi-S/ 35.5"

    Tournaments on schedule:
    - 5/9; (USGA) US Open Local (Q) - Medford Village Golf Club (NJ)
    - 5/15; (NJSGA) Mid-Am (Q) - Copper Hill Country Club (NJ)
    - 6/11; (NJSGA) Amateur (Q) - Fiddler's Elbow Country Club (NJ)
    - 6/24; (NJSGA) State Open (Q) - Essex Fells Country Club (NJ)
  • IvanDragoIvanDrago Members Posts: 450 ✭✭

    my m2 and m4 faces have started to rust on my 3 woods so i think its only a matter of time till mine crack.

    really poor QC

  • DFS PFDDFS PFD Members Posts: 833 ✭✭

    Why would the 2016 models (which are known to break) just magically stop having issues because you bought another one??

    TC Rogue SZ 8.8* Pro Orange 70TX/ ACCRA TZ5 75 M5
    M2 Tour 15* Kuro Kage DC 70TX
    790 UDI Tensei Pro White 100TX
    4-PW Apex Pro 19 DG X7's
    50* MG Raw Tour issue S400
    55* MG Raw Tour issue S400
    60* Hi-Toe Tour Issue S400
    J-DAY Spider
  • jut111jut111 Members Posts: 1,596 ✭✭
    edited Apr 15, 2019 10:18pm #22

    Wait a sec. you’re telling me you’ve haven’t gotten refunds/replacements on any of these and your stil coming back for more?

  • BB28403BB28403 Members Posts: 3,090 ✭✭

    @xabia said:
    Let me preface this by saying the 2016 M series driver and HL 3 wood are the BEST clubs I have ever hit. I have tried to replace them with something else, but they are always what I come back to. However I have now had 5 cracked clubs since 9/22/16 (so approximately one calendar year). I certainly play a lot of golf, but I am a good player (~4-5 cap), swing hard and fast but do not miss low or slam my clubs into the ground. Also my club has pretty nice range balls, not rocks.

    Over the last calendar year these clubs have all cracked on me

    1st one 9/22/2016; M2 3 wood 15*: face caved in completely after contact (no picture but it was obliterated)

    2nd one 5/31/17: Tour Issue M2 3 HL: Hit a ball flush it made a 90 degree turn in the air after about 100 yards and went 40 yards O.B. looked down and saw this

    20170530_200911 by James Cole, on Flickr

    3rd one cracked on 7/15/17 2016 M2 driver : crack in sole near speed pocket. I had this club for over a year and had hit a ton of balls with it. Chalked it up to bad luck and moved on (no picture no hard feelings)

    4th one cracked on September 10th: Tour Issue M2 3HL deep face (bought from BST this July). Played ~ 25 rounds with it and range time. Completely shocked this one cracked.

    20171003_114247

    5th one cracked 10/2/17: 2016 M2 driver (bought on BST in early September and was virtually new) have played about 10 rounds with it and then looked down yesterday and saw this after a funny sounding shot.

    20171002_082304

    Two of these pictures were taken right after impact so the clubs are somewhat dirty, but I repeat that I am not abusive to my clubs nor do I feel like I should be having these kinds of issues. In fact I have two ping anser hybrids that I hit a TON of balls with (17* and 20*) that have not even come close to having issues after around 2 years for the 17 and 1 for the 20. Before this I had a super tri that I had an incalculable number of balls with (when I was terrible and hit all over the clubface) that had no issues.

    I am not trying to bash Taylormade, but this is kind of crazy right? Has anyone else had this many or any issues with 2016 M series woods?

    Taylormade saves cash making your equipment with less than tolerable metal width. Yet you keep buying them... switch to another brand.
    This is like a smoker asking Reynolds why they cause cancer and Reynolds replying, oh send those in and we can replace them.

  • xabiaxabia Members Posts: 1,828 ✭✭

    I have gotten 3 replacements from TM through my club. Not a sympathy session just sharing information and the fact that its kind of crazy to have that many clubs of the same model break
    Broke a G400 driver as well last year got a replacement and sold it. Maybe I am just cursed

    Mayfield Sand Ridge CC
    TI M2 Tensei Orange V3 60TX
    TI M2 Tensei Blue 70TX / M4 Atmos 7 stiff / CBX HC Evenflow Black 75X
    T1 M2 16.5 Speeder Evo 3 7X
    Mizuno MMC Fli Hi 3 iron Diamana D+ 90X / Ping Anser 20* oban kiyoshi white
    MP 18 MB 4-PW Ctaper Lite 110 stiff
    Scratch 53 / Vokey SM7 Raw 56* / SM7 60D Raw
    Odyssey Jalibird Mini 33"
  • mizuno playermizuno player Mizuno player Members Posts: 1,301 ✭✭

    Do you hit a lot of range balls? The hard range rocks can be deadly to a driver.

  • Edward_MajorwinEdward_Majorwin British ColumbiaMembers Posts: 23 ✭✭

    @xabia said:
    And another two to add to the list
    TI M2 3Wood

    TI M2 3HL

    that's 7!

    Wow!! That crack is identical to the one I suffered on my very same 2017 M2 3W. Lots of low quality range balls is what I figured the culprit to be at the time.
    I took it back to the store and TM sent a brand new club for me which was in my hands in under 2 weeks.

    Right-handed Canadian golfer swinging left
    Ping G400 9.5
    Taylor Made M4 3-wood
    Ping G400 3H
    Titleist AP2 718 4-PW
    Titleist Vokey SM6 52 & 56 degree, Callaway Mack Daddy2 60 degree
    Odyssey Works blade
    Ball: Callaway Supersoft (yellow)
    Tees: Wood

  • stage1350stage1350 If you stand for nothing, you'll fall for anything. Members Posts: 10,239 ✭✭

    The 3 woods love to crack there. No thanks!

    Tour Issue Bridgestone J715 B5 9.5° / Project X T1100 75g 6.5 flex ___OR___ TC Callaway Epic Sub Zero 9° / Graphite Design P9003 TX
    TC Callaway XHot 3DEEP 13° / Project X T1100 95g 6.5 flex ______________ TC Callaway XHot 3DEEP 13° / Graphite Design DI-10 TX
    TC Callaway X2Hot 5DEEP 18.5° / Project X T1100 95g 6.5 flex____________ TC Callaway Epic hybrid 18° / Graphite Design DI-105 X
    DLC Black Bridgestone J15CB 3-PW / Tour Issue Dynamic Gold X7_________ Scratch AR-1 v2 3-PW / Tour Issue Dynamic Gold X7
    DLC Black Bridgestone Tour B XW-1 54°&60 / Tour Issue Dynamic Gold X7___ Scratch FIT DS 54°&60° / Tour Issue Dynamic Gold X7
    Bettinardi BB2 Prototype Copper Plated _______________________________ Scratch McCoy 8802 handmade

    They can keep erasing this. They simply prove my point... censors.
  • kody17kody17 Posts: 746 ✭✭

    Start using Wilson Duo Softs. That will help.

    Titleist 910 D2 10.5* w/ Motore Speeder VC 6.2 TS X
    Adams Tight Lies 16* w/ Aldila Rogue I/O Stiff
    Srixon U85 18* w/ UST Recoil 95 X
    Srixon z545 4-PW w/ DG X100
    Cleveland RTX 3 50* & 58* w/ DG X100
    Odyssey Metal X Milled 1W

  • ProphetLogicProphetLogic Members Posts: 507 ✭✭

    Just curious, how fast do you swing?

  • Kale_mKale_m Members Posts: 1,739 ✭✭

    I have broke

    2 m2 tour 3w
    1 m1 3w
    1 2017 m1 driver

    Waiting on a warranty replacement on my m2 tour

    Currently have a m3 3w in the bag
    M4 driver and a m6 driver

    Like the tm products for the low spin they give me and the looks. When trying to make things “faster” this kind of stuff is going to happen

    Taylormade M4 9.5 (set to 7.5) Tensei Pro Orange 70tx
    3w — undecided
    Taylormade 790 UDI 2 iron Tensei Pro White 90tx
    Callaway Apex MB Raw TIX100
    Callaway md4 52/56
    Tm hi toe 60
    Tm spider x 35” navy with true path alignment
  • bladehunterbladehunter Today was a good day.... Members Posts: 25,025 ✭✭

    @xabia said:

    @bladehunter said:

    @stage1350 said:
    The 3 woods love to crack there. No thanks!

    Long time no read dude ! Where you been ?

    Yep op. 3 woods crack often. But. The M series is still the best I’ve ever hit. So I keep relaxing them. And I’m far from a Tm fanboy.

    Not sure what else I can say, they are the best I have ever hit by far, yet they crack, and yet I keep coming back.
    I do hit a decent amount of balls, but in the off-season and early parts of the season I only hit my woods with balls from my shag bag that are stored in the house to try and prevent this issue.

    I’m samecas you. I have room to practice at home. So I hit a lot of balls. Almost all premium ( few old range duds in the bucket). If you hit the middle and hit a lot of balls hard it’s going to happen. But I think that’s the trade off for the performance we see.

    TM Tour M6 11.2 * KK Tini XTS 70X
    TM Tour 17 M1 14.5* Graphite Design ADDI 8x
    Titleist Tour Proto MB 3-pw Modus 130X
    Ping Glide Forged   54 60 S400
    Cameron GSS 009 1.5 tungsten sole weights, sound slot
«1
Sign In or Register to comment.