Iron Factory Refurb Review -- '14 TM TP MBs -- Delivered 10/23; Finished pics ADDED!

After deliberating on which of my sets I wanted to get redone, I figured this set would look classic and clean if done up right. I weighed a few options about where to go, and decided after talking to a few friends on here i'd send these to the Iron Factory.

Glad I chose this set to redo -- side note, I found out my C-Tapers that were in these were bent at the tips on all but 2 shafts. The heads themselves have browning but thankfully not a whole lot of real nicks/dings.

I'm going to get a few things done --

1) Refurbish - finish will be "Tour Chrome Bright" - polished with black paint fill in the Iron # and logo on the back of the club, "FORGED" on the neck in White

2) Re groove

3) Welding over the 'MB' and 'Tour Preferred' notations on the back of the blade for a cleaner look

Before going out, i weighed each head:

4I: 250g

5I: 255g

6I: 263g

7I: 269g

8I: 277g

9I: 290g

PW: 293g

Here are some before pictures (these are getting sent out on 5 October 2017, expected wait time is roughly 4-6 weeks):

4I:

5I:

6I:

7I:

8I:

9I:

PW:

Can't wait to get these back - should be pretty awesome. Trying to decide which shafts I want to put in these -- either DG TI 120 X100's or Modus 125X's

Cheers fellas - if anyone has questions, pricing, etc, please let me know in PM and I'll be happy to share. His pricing is on the site for basic refurbs, but with the welding it cost me a bit more.

- Gio

I've had them do a couple of sets for me. Always in the satin finish. I'm sure they will do a good job. Be patient however, they are not the quickest in the world and you will not get a ton of communication during the process. However, when I did call they were always very nice.

I've had them do a couple of sets for me. Always in the satin finish. I'm sure they will do a good job. Be patient however, they are not the quickest in the world and you will not get a ton of communication during the process. However, when I did call they were always very nice.

i have a few iron sets so, getting them back asap isn't necessary and after reading the reviews -- i have an idea what i'm in for.

i talked to him on the phone already so, he knows they're in route. when you got them back, what % of the nicks/dings you had in them prior to refurb was he able to get out you figure?

I got the chance to talk to Jim yesterday on the phone - we walked through the build and what i was looking for exactly, and to my surprise he said it shouldn't take but 2 weeks or so go get them back to me.

i decided instead of going with modus 125 or dg -- i'll be going with Modus 105x instead.

stay tuned!

update -- my heads ship back to me this thursday -- i talked to jim this morning and he said they came out great -- just need to be chromed. super stoked and can't believe how fast he's getting these back to me.

The 2014 do look good, great choice for a Refurb and will have a Cool look with the welded up bits!!

Excited to see these !!!

Excited to see the before and after pics!

Re KBS Shafts

I contacted them recently regarding tip failures in a set of KBS Tours, the mid irons were all bent inside the hosel. KBS arranged for a replacement set within about 2 weeks. All I needed to do was provide pictures of the pulled shafts.

http://www.golfwrx.com/forums/topic/1446822-kbs-c-taper-bent-tips/

Re KBS Shafts

 

I contacted them recently regarding tip failures in a set of KBS Tours, the mid irons were all bent inside the hosel. KBS arranged for a replacement set within about 2 weeks. All I needed to do was provide pictures of the pulled shafts.

 

http://www.golfwrx.c...aper-bent-tips/

...come again? wrong thread? lol thanks though! my bad, i realized you were referencing the bent tips above. KBS took care of me -- thank you!!!

Re KBS Shafts

 

I contacted them recently regarding tip failures in a set of KBS Tours, the mid irons were all bent inside the hosel. KBS arranged for a replacement set within about 2 weeks. All I needed to do was provide pictures of the pulled shafts.

 

http://www.golfwrx.c...aper-bent-tips/

 

...come again? wrong thread? lol thanks tho!

In your initial post:

"Glad I chose this set to redo -- side note, I found out my C-Tapers that were in these were bent at the tips on all but 2 shafts. The heads themselves have browning but thankfully not a whole lot of real nicks/dings."

I thought the same thing when I read it, then I went back and read your OP. I think he was just trying to help you get some replacement C-Tapers for free because all but 2 of yours were bent.

The 2014 do look good, great choice for a Refurb and will have a Cool look with the welded up bits!!

thanks man -- i had a few choices but, i wanted to keep it TM and keep it classy

Excited to see these !!!

Excited to see the before and after pics!

promise you fellas, the after pics will be posted as soon as i get them back. anxious like a kid on christmas eve. lol

 

 

In your initial post:

"Glad I chose this set to redo -- side note, I found out my C-Tapers that were in these were bent at the tips on all but 2 shafts. The heads themselves have browning but thankfully not a whole lot of real nicks/dings."

 

I thought the same thing when I read it, then I went back and read your OP. I think he was just trying to help you get some replacement C-Tapers for free because all but 2 of yours were bent.

oh, good call. (oops) -- i got a full set of C-tapers already -- KBS took care of me.

Re KBS Shafts

 

I contacted them recently regarding tip failures in a set of KBS Tours, the mid irons were all bent inside the hosel. KBS arranged for a replacement set within about 2 weeks. All I needed to do was provide pictures of the pulled shafts.

 

http://www.golfwrx.c...aper-bent-tips/

 

...come again? wrong thread? lol thanks tho!

 

In your initial post:

"Glad I chose this set to redo -- side note, I found out my C-Tapers that were in these were bent at the tips on all but 2 shafts. The heads themselves have browning but thankfully not a whole lot of real nicks/dings."

 

I thought the same thing when I read it, then I went back and read your OP. I think he was just trying to help you get some replacement C-Tapers for free because all but 2 of yours were bent.

Exactly this.

Thanks Roadking.

Just trying to help you out. That's what the forum is for.

Can't wait to see the finished product...those are gonna be siiiick

Re KBS Shafts

 

I contacted them recently regarding tip failures in a set of KBS Tours, the mid irons were all bent inside the hosel. KBS arranged for a replacement set within about 2 weeks. All I needed to do was provide pictures of the pulled shafts.

 

http://www.golfwrx.c...aper-bent-tips/

 

...come again? wrong thread? lol thanks tho!

 

In your initial post:

"Glad I chose this set to redo -- side note, I found out my C-Tapers that were in these were bent at the tips on all but 2 shafts. The heads themselves have browning but thankfully not a whole lot of real nicks/dings."

 

I thought the same thing when I read it, then I went back and read your OP. I think he was just trying to help you get some replacement C-Tapers for free because all but 2 of yours were bent.

 

Exactly this.

 

Thanks Roadking.

 

Just trying to help you out. That's what the forum is for.

Let's see the finish product

Are the new grooves conforming?

Let's see the finish product

I'll post pics when i actually get them back. Talked to Jim yesterday, said that he was dipping a few of them in the chrome again to help get the weight up in a few of them -- they should go out the latest Monday, may have went out today.

Are the new grooves conforming?

Nice

Can't wait to see what these look like after the refinish!

Never hit the 9i on the range, I assume?

Never hit the 9i on the range, I assume?

Usually my 52, then 7, then 5, then 3w, then driver, back to 7i, then onto the putting green.

I totally get that approach and would probably default to that if I weren't such a nutbag. I alternate my warm-up clubs so I always get even wear throughout the bag.

I HATE browning.

Usually my 52, then 7, then 5, then 3w, then driver, back to 7i, then onto the putting green.

I totally get that approach and would probably default to that if I weren't such a nutbag. I alternate my warm-up clubs so I always get even wear throughout the bag.

 

I HATE browning.

...they're out for delivery today!!

oh my dear sweet lord.

now, after talking to Jim, i see that in his efforts to get them to me, there are minor paintfill issues (i don't care, i'll fix them myself)...but they came out incredible. taking pics now.

Pics!

CLEAN!

Dope!

they look nice how's the weight ?