Haywood Wedges

13

Comments

  • haywoodgolfhaywoodgolf Members Posts: 41 ✭✭
    b.helts wrote:


    My Haywood wedges are at the club builder. Getting Paderson kinetixx 125g wedge shafts. When they’re built I’ll post some pics.



    They are beauties.



    My Haywood wedges are at the club builder. Getting Paderson kinetixx 125g wedge shafts. When they’re built I’ll post some pics.



    They are beauties.






    That’s awesome! Stoked to see photos when they are done
  • haywoodgolfhaywoodgolf Members Posts: 41 ✭✭
    Hey all!



    Would love feedback on a prototype we are testing.

    Take a look and let me know your thoughts.



    Our goal is to be able to have a base model set (4-PW) for $600 with options to upgrade shafts and grips of course.



    Testing is being done this week but would love to get everyone’s thoughts on the look. We would be offering in black and silver (same finishes as the wedges) so people can have a complete set.



    Appreciate any responses and feedback in advance!



    Cheers,



    JH
  • LaymanMLaymanM Cincinnati, OHMembers Posts: 2,123 ✭✭


    Hey all!



    Would love feedback on a prototype we are testing.

    Take a look and let me know your thoughts.



    Our goal is to be able to have a base model set (4-PW) for $600 with options to upgrade shafts and grips of course.



    Testing is being done this week but would love to get everyone’s thoughts on the look. We would be offering in black and silver (same finishes as the wedges) so people can have a complete set.



    Appreciate any responses and feedback in advance!



    Cheers,



    JH




    That's a nice looking blade! If you could do raw finish for $600 people would buy them like hot cakes!



    What are the lofts going to be and stock shaft options?
    PING G410 9* PX Evenflow Black 75 6.0
    PING G410 LST 3w PX Evenflow Black 85 6.0
    PING G410 5w PX Evenflow Black 85 6.0
    PING G410 4-PW AWT 2 0 stiff
    PING Stealth Glide 2.0 50ss/54ss/58ss
    PING Sigam G Tyne
  • leftygolferessexleftygolferessex Members Posts: 186 ✭✭
    LaymanM wrote:


    Hey all!



    Would love feedback on a prototype we are testing.

    Take a look and let me know your thoughts.



    Our goal is to be able to have a base model set (4-PW) for $600 with options to upgrade shafts and grips of course.



    Testing is being done this week but would love to get everyone’s thoughts on the look. We would be offering in black and silver (same finishes as the wedges) so people can have a complete set.



    Appreciate any responses and feedback in advance!



    Cheers,



    JH




    That's a nice looking blade! If you could do raw finish for $600 people would buy them like hot cakes!



    What are the lofts going to be and stock shaft options?


    Agreed! Go raw! We all love raw!
    Cobra F8+ Aldila Rogue Silver
    Callaway Rogue Sub Zero 13.5 degrees Project X HZRDUS
    Callaway Apex UT 18 degrees UST Mamiya Recoil ES
    Srixon 565/765 4-PW
    Cleveland RTX4 50, 54, 60
    Taylormade Spider X
    Jones Utility Trouper
  • MadGolfer76MadGolfer76 Admiration is the state furthest from understanding. Members Posts: 19,892 ✭✭


    Hey all!



    Would love feedback on a prototype we are testing.

    Take a look and let me know your thoughts.



    Our goal is to be able to have a base model set (4-PW) for $600 with options to upgrade shafts and grips of course.



    Testing is being done this week but would love to get everyone's thoughts on the look. We would be offering in black and silver (same finishes as the wedges) so people can have a complete set.



    Appreciate any responses and feedback in advance!



    Cheers,



    JH




    Good on you guys for not applying ridiculous stampings on your irons and wedges. Keep that clean look and I would give them a go when they come out.
    Titleist 915 D4 10.5
    Callaway BBA 816 16
    Mizuno CLK 19, 22
    Mizuno JPX 900HM 5-Lw
    PING Sigma G Tyne
    Srixon Z-Star
    WITB
  • haywoodgolfhaywoodgolf Members Posts: 41 ✭✭
    edited Jul 10, 2018 #67
    LaymanM wrote:



    Hey all!



    Would love feedback on a prototype we are testing.

    Take a look and let me know your thoughts.



    Our goal is to be able to have a base model set (4-PW) for $600 with options to upgrade shafts and grips of course.



    Testing is being done this week but would love to get everyone’s thoughts on the look. We would be offering in black and silver (same finishes as the wedges) so people can have a complete set.



    Appreciate any responses and feedback in advance!



    Cheers,



    JH




    That's a nice looking blade! If you could do raw finish for $600 people would buy them like hot cakes!



    What are the lofts going to be and stock shaft options?






    Raw finish as in the one shown in photos?

    lofts will be the standard for a 4-PW which of course we would be able to adjust the loft and lie for customers. Looking at some KBS and some true tempers re stock shafts and then offer upgraded options. Really depends on a few things including pre orders and how many people want to pick their shafts etc so I can build them out specifically for them.



    I am building a pre order list out, so if anyone is interested, let me know and I will put you on the list - [email protected]
  • haywoodgolfhaywoodgolf Members Posts: 41 ✭✭
    Thanks @madgolfer76 - the only thing it will have is the haywood signature like the wedges and thats it.
  • kthomaskthomas Members Posts: 40 ✭✭
    Those look really nice! Will individual irons be for sale? Say perhaps for someone who may want to make a "minimalist" blade setup (4i, 6i, 8i, PW)?
  • taylormade4lifetaylormade4life Members Posts: 1,272 ✭✭
    awesome looking iron! Agree (personally) the ability to get a raw set would be great. Look forward to hearing more about them!
  • LaymanMLaymanM Cincinnati, OHMembers Posts: 2,123 ✭✭

    LaymanM wrote:



    Hey all!



    Would love feedback on a prototype we are testing.

    Take a look and let me know your thoughts.



    Our goal is to be able to have a base model set (4-PW) for $600 with options to upgrade shafts and grips of course.



    Testing is being done this week but would love to get everyone’s thoughts on the look. We would be offering in black and silver (same finishes as the wedges) so people can have a complete set.



    Appreciate any responses and feedback in advance!



    Cheers,



    JH




    That's a nice looking blade! If you could do raw finish for $600 people would buy them like hot cakes!



    What are the lofts going to be and stock shaft options?






    Raw finish as in the one shown in photos?

    lofts will be the standard for a 4-PW which of course we would be able to adjust the loft and lie for customers. Looking at some KBS and some true tempers re stock shafts and then offer upgraded options. Really depends on a few things including pre orders and how many people want to pick their shafts etc so I can build them out specifically for them.



    I am building a pre order list out, so if anyone is interested, let me know and I will put you on the list - [email protected]




    They look nice! I just read that you will be offering in black and silver....

    I just think the demand for raw is a lot, atleats on golfwrx.

    PING G410 9* PX Evenflow Black 75 6.0
    PING G410 LST 3w PX Evenflow Black 85 6.0
    PING G410 5w PX Evenflow Black 85 6.0
    PING G410 4-PW AWT 2 0 stiff
    PING Stealth Glide 2.0 50ss/54ss/58ss
    PING Sigam G Tyne
  • gentlesgentles Members Posts: 1,867 ✭✭

    LaymanM wrote:



    Hey all!



    Would love feedback on a prototype we are testing.

    Take a look and let me know your thoughts.



    Our goal is to be able to have a base model set (4-PW) for $600 with options to upgrade shafts and grips of course.



    Testing is being done this week but would love to get everyone’s thoughts on the look. We would be offering in black and silver (same finishes as the wedges) so people can have a complete set.



    Appreciate any responses and feedback in advance!



    Cheers,



    JH




    That's a nice looking blade! If you could do raw finish for $600 people would buy them like hot cakes!



    What are the lofts going to be and stock shaft options?






    Raw finish as in the one shown in photos?

    lofts will be the standard for a 4-PW which of course we would be able to adjust the loft and lie for customers. Looking at some KBS and some true tempers re stock shafts and then offer upgraded options. Really depends on a few things including pre orders and how many people want to pick their shafts etc so I can build them out specifically for them.



    I am building a pre order list out, so if anyone is interested, let me know and I will put you on the list - [email protected]




    Raw as in unplated carbon steel that will rust over time.



    Look great, probably didn't pick the best surface to take pics on! Looks like quite a rounded leading edge or maybe it's just the lighting?
    Taylormade 2016 M2 10.5 Aldila Tour Blue 75x
    Taylormade 2016 M2 DF 3hl Aldila Tour Blue 85x
    Callaway Apex 20* Aldila Tour Blue 85x
    Taylormade RSI UDI 4i DG AMT x100
    Taylormade P770 5-P DG AMT x100
    Ping Glide 51,55, 59 DG S400
    Ping Anser Milled 5

    On the bench/testing: G400 LST, Callaway 3deep, Cobra LTD 3-4, Callaway Apex 23*, UDI 2 and 3 irons, Ping Glide 53, PM Grind 64
  • jonn443jonn443 Jonnystx Members Posts: 4,596 ✭✭
    LaymanM wrote:



    Hey all!



    Would love feedback on a prototype we are testing.

    Take a look and let me know your thoughts.



    Our goal is to be able to have a base model set (4-PW) for $600 with options to upgrade shafts and grips of course.



    Testing is being done this week but would love to get everyone’s thoughts on the look. We would be offering in black and silver (same finishes as the wedges) so people can have a complete set.



    Appreciate any responses and feedback in advance!



    Cheers,



    JH




    That's a nice looking blade! If you could do raw finish for $600 people would buy them like hot cakes!



    What are the lofts going to be and stock shaft options?




    THIS.... ALL DAY LONG HERE.
    AB TP 10.5*/ DI6X
    AB TP 3HL / 757
    XTD 19*/ Fubuki Ax
    DWS 24*/ VS Proto
    J15 CB 5-PW/ Modus 3 125S
    X-Forged MD (50*, 56* 60*)
    Spider Si/ SS Mid SLim 2.0
  • rcubed3rrcubed3r Members Posts: 321 ✭✭
    I placed my order yesterday for a 52, length 35.5, 61 degree lie, D6 SW.

    Working with Josh and my many requests was a breeze.

    I am really looking forward to seeing this beauty in person and trying it out!!

    I will report when it arrives.



    Josh,

    Any chance that you'll offer a stronger wedge, maybe a 48 degree at some point? I like to match my PW to my higher lofted stuff when possible.



    Ron
  • getair23getair23 Members Posts: 1,957 ✭✭
    Blades look great. Very tempting!
    Ping G400 MAX Aerotech Ti-Fiber Tour 70 F6-x
    Cobra F6 Baffler 17.5 Elements Chrome 7F5T
    Srixon Z 745 (4-9) Z 945 (pw) KBS tour-x
    Fourteen RM 21 50* KBS Tour FLT 130-x
    Bettinardi "The Hive" Black 54* and 60* KBS Tour FLT 130-x
    Edel 64* KBS C-Taper s+
    Evnroll ER2 
  • the bishopthe bishop Members Posts: 3,232 ✭✭
    edited Jul 12, 2018 #76


    Hey all!



    Would love feedback on a prototype we are testing.

    Take a look and let me know your thoughts.



    Our goal is to be able to have a base model set (4-PW) for $600 with options to upgrade shafts and grips of course.



    Testing is being done this week but would love to get everyone's thoughts on the look. We would be offering in black and silver (same finishes as the wedges) so people can have a complete set.



    Appreciate any responses and feedback in advance!



    Cheers,



    JH


    Nice looking shape. Will there be any other engravings or stampings on the back? Also what kind of timeline for availability are you anticipating?
    Dynacraft Avatar Evolution 10.5* - Proforce V2 HL - S
    Callaway X-Hot 15* - Project X something or other - R
    Maltby KE4 Tour 19*/22* - Kuro Kage Black 80hy - S
    Maltby MMB 17 - DGS300
    W/S PMP Raw 52/56/60 - KBS Hi-Rev 2.0
    W/S Bucktown
  • haywoodgolfhaywoodgolf Members Posts: 41 ✭✭
    rcubed3r wrote:


    I placed my order yesterday for a 52, length 35.5, 61 degree lie, D6 SW.

    Working with Josh and my many requests was a breeze.

    I am really looking forward to seeing this beauty in person and trying it out!!

    I will report when it arrives.



    Josh,

    Any chance that you'll offer a stronger wedge, maybe a 48 degree at some point? I like to match my PW to my higher lofted stuff when possible.



    Ron






    Hey Ron!



    Thanks again for the order.

    We are looking at irons right now and they will come in raw and then black and silver to match the wedges.

    We are completing our testing this weekend and are trying to decide which club to go with.

    Samples are being made up in the 3-4 weeks of the exact irons so once I have them in my hands, I will take photos and then post them here.

    I will be taking pre-orders, which will also help decide a few things.



    We are looking at offering a stock set, with some standard KBS shafts, and then also offer a made to spec option for an upgraded charge, where if you pre order, you can select your shafts, grips etc, and we will get you a price for the customization as a set, so that when they arrive, they are everything exactly as you want them.

    the bishop wrote:



    Hey all!



    Would love feedback on a prototype we are testing.

    Take a look and let me know your thoughts.



    Our goal is to be able to have a base model set (4-PW) for $600 with options to upgrade shafts and grips of course.



    Testing is being done this week but would love to get everyone's thoughts on the look. We would be offering in black and silver (same finishes as the wedges) so people can have a complete set.



    Appreciate any responses and feedback in advance!



    Cheers,



    JH


    Nice looking shape. Will there be any other engravings or stampings on the back? Also what kind of timeline for availability are you anticipating?






    Thanks for the comment and great question!

    The only marking on the irons would be the Haywood logo, the same as the wedges.

    We have discussed putting forged on the hosel, but personally I think we should keep it as plain and sleek as possible.
  • haywoodgolfhaywoodgolf Members Posts: 41 ✭✭
    Here is a mock up of the iron in black image/smile.png' class='bbc_emoticon' alt=':)' />
  • MadGolfer76MadGolfer76 Admiration is the state furthest from understanding. Members Posts: 19,892 ✭✭


    Thanks @madgolfer76 - the only thing it will have is the haywood signature like the wedges and thats it.




    Brother, that is the perfect amount.



    Here is a mock up of the iron in black image/smile.png' class='bbc_emoticon' alt=':)' />




    Oooo...



    Is that plating?
    Titleist 915 D4 10.5
    Callaway BBA 816 16
    Mizuno CLK 19, 22
    Mizuno JPX 900HM 5-Lw
    PING Sigma G Tyne
    Srixon Z-Star
    WITB
  • b.heltsb.helts Members Posts: 2,842 ✭✭
    Do I took these out to the local practice area last night. My first thoughts: the heads are small, which is not a complaint but a compliment. They are compact and nice to look down at. They are quite soft when struck well. The leading edge is sharp and rounded. I think I’m going to have my club guy ground it a bit square and dull it out a bit.



    I didn’t hit any shots farther than about 50 yards but I love the heft and weight distribution. So far pretty stoked.



  • haywoodgolfhaywoodgolf Members Posts: 41 ✭✭
    Man, that is a **** setup! Thanks for sharing the photos!
  • haywoodgolfhaywoodgolf Members Posts: 41 ✭✭
    edited Jul 17, 2018 #82
    We would love to get more feedback on the production of our irons - finishes, types of shafts, pricepoint etc.

    We have found the head we are going to go with after multiple user testing sessions and feedback.



    We would also love to get thoughts on pre ordering as well - what would drive you to be one of the first Haywood Iron owners ?

    As a small business, we want to hear from our potential customers (you all) and see how we can make not only the production of the irons, but the ordering of our first sets of irons, a memorable experience for all of our early supporters.



    Would you like to see a stock set up, and then perhaps a customization option, where you can pick your desired shafts, grips, etc and have them built out to your specifications once they are produced?



    Hit us up and let us know your thoughts! We truly appreciate the feedback and take all of it into consideration.
    Post edited by Unknown User on
  • b.heltsb.helts Members Posts: 2,842 ✭✭
    Will the irons be conforming?
  • Titleist-GolferTitleist-Golfer I'd rather be driving a Titleist Members Posts: 3,094 ✭✭
    Raw like these ...



    [font=tahoma,geneva,sans-serif]Go Navy!

    WITB
    Titleist 915 D4 8.5 Oban V430 6.5 75g
    Titleist 915 F2 15 Rogue Silver 80S
    Titleist VG3 18.5 JDM PX 6.0
    Titleist 714MB 3-PW DG S300
    Titleist TVD raw C-C 53 and Indigo SM5 58 DGTI
    Scotty Cameron Studio Stainless Newport Beach 340g 35"
    Titleist ProV1 2018[/font]
  • leftygolferessexleftygolferessex Members Posts: 186 ✭✭


    Raw like these ...





    Oh lord!



    Mr Haywood please deliver the above!



    As for what I would like to see, the first thing would be make sure you offer them in left handed!



    I have to be honest though, my days of blades are now over now I have my Srixons, but if I was still playing blades then I would love the stealthy look. I would suggest you look at things like grips, shafts and ferrules



    Maybe having some limited run finishes? I am a sucker for pretty things
    Cobra F8+ Aldila Rogue Silver
    Callaway Rogue Sub Zero 13.5 degrees Project X HZRDUS
    Callaway Apex UT 18 degrees UST Mamiya Recoil ES
    Srixon 565/765 4-PW
    Cleveland RTX4 50, 54, 60
    Taylormade Spider X
    Jones Utility Trouper
  • WigglyCometWigglyComet Members Posts: 22 ✭✭


    We would love to get more feedback on the production of our irons - finishes, types of shafts, pricepoint etc.

    We have found the head we are going to go with after multiple user testing sessions and feedback.



    We would also love to get thoughts on pre ordering as well - what would drive you to be one of the first Haywood Iron owners ?

    As a small business, we want to hear from our potential customers (you all) and see how we can make not only the production of the irons, but the ordering of our first sets of irons, a memorable experience for all of our early supporters.



    Would you like to see a stock set up, and then perhaps a customization option, where you can pick your desired shafts, grips, etc and have them built out to your specifications once they are produced?



    Hit us up and let us know your thoughts! We truly appreciate the feedback and take all of it into consideration.




    Overall, I would just say keep the price point reasonable with a couple options for shafts and grips. Raw heads would be fantastic. The one random option that I would love to see is for ferrules.
  • haywoodgolfhaywoodgolf Members Posts: 41 ✭✭
    b.helts wrote:


    Will the irons be conforming?






    Yes Sir they will be.
  • b.heltsb.helts Members Posts: 2,842 ✭✭

    b.helts wrote:


    Will the irons be conforming?




    Yes Sir they will be.




    Not gonna lie boss, these may have to be checked out.



    You got a full spec sheet on them with bounce and offset numbers?
  • haywoodgolfhaywoodgolf Members Posts: 41 ✭✭
    b.helts wrote:


    b.helts wrote:


    Will the irons be conforming?




    Yes Sir they will be.




    Not gonna lie boss, these may have to be checked out.



    You got a full spec sheet on them with bounce and offset numbers?








    I don't right now.

    I am still in the process of everything and waiting on the remainder of the samples in different finishes.
  • haywoodgolfhaywoodgolf Members Posts: 41 ✭✭
    Hey all!



    Just wanted to let everyone know that our wedges are officially NON-CONFORMING.



    They were deemed to have too deep of milling on the face according the 2 different sections in the rules and regulations of the R&A.



    It is unfortunate that competitive tournament playing individuals cannot use our clubs, but for everyone else, it is great for you to be able to know first hand that our wedges do in fact produce more spin because of the milling attribute we have added. You can feel more confident with your distance and spin control on chips and approaches and improve your scoring around the green image/smile.png' class='bbc_emoticon' alt=':)' />



    If anyone has any additional questions, feel free to message me directly.



    Cheers,



    JH
  • leftygolferessexleftygolferessex Members Posts: 186 ✭✭
    My wedges turned up today, will post more once I get a chance to hit them!
    Cobra F8+ Aldila Rogue Silver
    Callaway Rogue Sub Zero 13.5 degrees Project X HZRDUS
    Callaway Apex UT 18 degrees UST Mamiya Recoil ES
    Srixon 565/765 4-PW
    Cleveland RTX4 50, 54, 60
    Taylormade Spider X
    Jones Utility Trouper
Sign In or Register to comment.