Taylormade hi-toe

1456810
10

Comments

  • dpb5031dpb5031 Jupiter, FLMembers  5877WRX Points: 1,443Posts: 5,877 Titanium Tees
    Joined:  #212

    I really like the stock KBS Hi-Rev. Play Modus 105x in my irons

    Posted:
    USGA Index: ~0

    WITB:
    Ping G410 LST 9 degree - Tour AD IZ 6x
    Ping G410 LST - Fujikura Pro TourSpec 73 
    Kasco K2K 33 - Fujikura Pro TourSpec 73 
    Callaway RazrX Tour 4h - Tour 95 shaft
    Ping i200 5-UW (2 flat) - Nippon Modus 105X
    Taylormade HiToe 54 (bent to 55 & 2 flat)
    Taylormade HiToe 64 (Bent to 62 & 2 flat)
    Palmer AP30R putter (circa 1960s)
    Taylormade TP5X Ball
  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • Jetierney13Jetierney13 Members  102WRX Points: 35Posts: 102 Fairways
    Joined:  #213

    On -, @dpb5031 said:

    I really like the stock KBS Hi-Rev. Play Modus 105x in my irons

    Agreed with this. I play Tour Issue X100 in my irons but my 52, 56, 60/64 I play the stock KBS and have zero issues.

    Posted:
  • EricWGolfEricWGolf Members  764WRX Points: 446Posts: 764 Golden Tee
    Joined:  #214

    Ordered mine with the same Modus 120s I have in my irons. Money.

    Posted:
  • NDGolfer13NDGolfer13 Members  1424WRX Points: 323Handicap: GolfPosts: 1,424 Platinum Tees
    Joined:  #215

    Put one in the bag last week and it’s realy good for me. Got a 60 sb and it’s easy to hit off most lies.

    Posted:
    M5 Kiyoshi Purple
    TM M4 16.5 VA Composites Drago 75
    Epon AF901 19*/22*
    PXG 031X Proto CTaper 125 5-P/Ping I500/I210 KBS Tour 125 5-P
    PXG 0311 Forged 50/56/60-Scratch 1018 50/53/58
    Rife Deep Blue

    FOR NOW...........
    All Clubs subject to change relative to my last bad round of golf......
  • StanksStanks Everything I post is confrontational Members  1816WRX Points: 279Handicap: ?Posts: 1,816 Platinum Tees
    Joined:  #216

    Oh yeah. No flack against the stock shaft. It's been good to me thus far but, the more I've been playing with X100s in my iron set and my Vokeys with S400, this is just the last key to the puzzle. Like most of us, I want consistency in the game and bag throughout. From the irons, to the grips, and to the shafts. We will see what comes from this.

    Posted:
  • DODGEMANIAC32123DODGEMANIAC32123 Members  110WRX Points: 33Posts: 110 Fairways
    Joined:  edited Apr 10, 2019 #217

    What's the consensus between the 4 way and ATV grind on a 60 deg. Hi toe? I recently got a 56.10 to try and it is great to open up and for shots around the green but is worse then my previous Callaway md3 s grind from the sand.

    Posted:
  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • dpb5031dpb5031 Jupiter, FLMembers  5877WRX Points: 1,443Posts: 5,877 Titanium Tees
    Joined:  #218

    On -, @DODGEMANIAC32123 said:

    What's the consensus between the 4 way and ATV grind on a 60 deg. Hi toe? I recently got a 56.10 to try and it is great to open up and for shots around the green but is worse then my previous Callaway md3 s grind from the sand.

    I have a 64 (bent to 62) with the ATV grind. I find it to be very versatile. When set square and up to about 30 degrees open, the leading edge remains pretty flush to the ground. Opening it up for bunker shots or flops exposes more of the bounce.

    Posted:
    USGA Index: ~0

    WITB:
    Ping G410 LST 9 degree - Tour AD IZ 6x
    Ping G410 LST - Fujikura Pro TourSpec 73 
    Kasco K2K 33 - Fujikura Pro TourSpec 73 
    Callaway RazrX Tour 4h - Tour 95 shaft
    Ping i200 5-UW (2 flat) - Nippon Modus 105X
    Taylormade HiToe 54 (bent to 55 & 2 flat)
    Taylormade HiToe 64 (Bent to 62 & 2 flat)
    Palmer AP30R putter (circa 1960s)
    Taylormade TP5X Ball
  • JoshzillaJoshzilla Members  325WRX Points: 79Posts: 325 Greens
    Joined:  #219

    On -, @Stanks said:

    Anyone switching the shafts in their HT? I have S400 in my 46, 50, and 55 Vokey SM7s and am just feeling goofy with the stock KBS shaft in the Ht. It feels like a wet noodle even on 3/4 shots. I have an S400 read to be loaded and installed but wasn’t sure if I was the lone soldier in this adventure. I’ll probably change them out this weekend.

    Nah man, I'm with you. I like a specific feel and I want it through the whole bag. In the irons I play x100 and I have s400 in my Hi Toe wedges.

    Posted:

    Ping G410 Plus 9* Driver w/ Graphite Design AD-DI7x

    Ping G410 LST 14.5* 3 wood w/ Graphite Design AD-DI8x
    Taylormade p790 UDI 2 iron w/ DG AMT x100
    Mizuno JPX919 Tour 4-PW w/ PX 6.5
    Vokey SM7 50/8, 55/9 & 60/8* w/ PX 6.0
    Scotty Cameron Newport 2 33"

    Titleist ProV1 (yellow)

  • JoshzillaJoshzilla Members  325WRX Points: 79Posts: 325 Greens
    Joined:  #220

    On -, @extrastiff said:

    Dueller wrote:

    I have one more spot in my bag and man im debating weather or not to get one of these in 60* or get the RTX3 to match my set. What bounce is everyone having success with? I would want it as versatile as possible around the green and bunker. Thinking the ATV sole if I was to pull the trigger?

    if going 60 I would go 4 way. 12 bounce (atv) was too much for flop shots. Even the 8 degrees was, I took mine down to 5 degrees for that reason

    I've gotta disagree. The ATV has made flops super easy for me. It might be challenging on a super tight lie but in general I prefer the higher bounce.

    Posted:

    Ping G410 Plus 9* Driver w/ Graphite Design AD-DI7x

    Ping G410 LST 14.5* 3 wood w/ Graphite Design AD-DI8x
    Taylormade p790 UDI 2 iron w/ DG AMT x100
    Mizuno JPX919 Tour 4-PW w/ PX 6.5
    Vokey SM7 50/8, 55/9 & 60/8* w/ PX 6.0
    Scotty Cameron Newport 2 33"

    Titleist ProV1 (yellow)

  • EricWGolfEricWGolf Members  764WRX Points: 446Posts: 764 Golden Tee
    Joined:  #221

    Love the ATV grind.

    Posted:
  • AG12AG12 Members  2112WRX Points: 1,061Handicap: 10Posts: 2,112 Platinum Tees
    Joined:  #222

    Just put in an order for the Hi-Toe 60 degree ATV grind with stock shaft and MCC+4 grip. Super stoked should be here next week

    Posted:
    Driver: Titleist TS2 9.5* Tensei Pro White 60
    4W: PING G410 16.5* Diamana D+ Limited 70
    4HY: PING G410 21* Accra FX 300H
    Irons: PING G410 5-UW Project X LZ 120
    Wedges: CBX2 54/12/Full Face 58/10 DG 115
    Putter: Bettinardi QB6 Carbon Limited
    Ball: Titleist ProV1x #12
    WITB
  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • bogeyprobogeypro The Original Bogeypro ALClubWRX  3558WRX Points: 440Handicap: +1Posts: 3,558 ClubWRX
    Joined:  #223

    Loving my hi-toe wedges. I have the 52 and 58. 58 has the 4 way grind, not the atv. Very versatile as well.

    Posted:
    TaylorMade SIM max driver 
    TaylorMade  M6 3 wood
    Mizuno JPX 850 2 hybrid
    Mizuno MP20 HMB 3-pw
    TaylorMade MG2  52
    TaylorMade MG2 58 
    Scotty Cameron 5.5m
  • n_ronesn_rones New YorkMembers  699WRX Points: 289Handicap: 4.2Posts: 699 Golden Tee
    Joined:  #224

    Purchased one of these off the BST last night after looking them over for a while. I heard some people are not the biggest fan of the higher lofted ones (58,60,64) on full swings. Currently with my 58 i only use it inside of 60 yards and situation-ally i never take a full swing with the club so the versatility of the Hi-Toe sounds perfect to me. I snagged one in a 58 atv grind and hope to have it next week to try out. Ill hit some full swings on the range just to see what the fuss is but im excited to give it a go.

    Posted:
    Taylormade Sim 10.5° GD AD IZ 7x 45.25 inches
    Taylormade SimTI 3 wood 15° GD Tour AD DI-7x 43 inches
    Taylormade SimTI 5 wood 19° GD Tour AD Di 7x 42 inches
    Taylormade Sim Max Rescue 22° Fuji Pro 2.0 8x
    Taylormade P790 2019 5-7 KBS Tour FLT 120s
    Taylormade P770 8-PW KBS Tour FLT 120s
    Taylormade MG2 50° 
    Taylormade MG2 54°
    Taylormade MG2 58°
    Bettinardi Queen B 6 SBS Limited
  • GC70GC70 What's Next? State of HockeyClubWRX  7796WRX Points: 319Handicap: 7.1Posts: 7,796 Titanium Tees
    Joined:  #225

    Great looking wedges, but I just can't get them dialed in. I have the 54 & 58. The 54 is very long on full shots compared to all my other wedges I've gamed and still game. The 58 is very inconsistent for me, it seems really hot. I'm going out now to give them another shot on my home course.

    Posted:
    Atmos Blue 6S
     Atmos Red 7S
    Atmos Blue 8S
    Apex CF19 4-AW C-Taper Lite
    SM7's RAW 50F - 54S - 58M - 62M
    Nike 006 Paul Casey Proto (Oven)
    Nike 006 Rory Proto (Oven)
    Scotty T22 Newport
    Pro V1x /

    WITB Link
  • ZNDavisZNDavis Members  112WRX Points: 90Handicap: 10.7Posts: 112 Fairways
    Joined:  #226

    Love my 58 degree ATV Hi-Toe. Everything 80 and in.

    Posted:
    Callaway Epic Flash SZ • Tensei CK Pro White
    Callaway Epic Flash 3 wood • Tour AD MT7X
    Titleist 718 T-MB 2 iron, 4 iron, AP2 5-PW • KBS Tour 130X
    Taylormade Hi-Toe 50°, 54°, 60° wedge • KBS Hi-Rev 2.0
    Scotty Cameron Special Select Squareback 2
    Bridgestone Tour B XS
  • AG12AG12 Members  2112WRX Points: 1,061Handicap: 10Posts: 2,112 Platinum Tees
    Joined:  #227

    So got a call from my local shop that the ATV 60* heads are on backorder until the middle of June. So decided for now to go with the 4 way sole 60*. still super pumped.

    Posted:
    Driver: Titleist TS2 9.5* Tensei Pro White 60
    4W: PING G410 16.5* Diamana D+ Limited 70
    4HY: PING G410 21* Accra FX 300H
    Irons: PING G410 5-UW Project X LZ 120
    Wedges: CBX2 54/12/Full Face 58/10 DG 115
    Putter: Bettinardi QB6 Carbon Limited
    Ball: Titleist ProV1x #12
    WITB
  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • tigerfan23tigerfan23 Members  7995WRX Points: 358Posts: 7,995 Titanium Tees
    Joined:  #228

    ive tried these many times and come away super impressed every time. I can flop the 60 off cement. The ATV is really good. I could play either one no problem.

    How are these on full shots??

    Posted:

    SIM MAX 10.5
    SIM MAX 15

    TS2 HYBRID 19

    T100 4-PW
    SM8 CHROME 52 56 60

    2020 NEWPORT 2

  • AG12AG12 Members  2112WRX Points: 1,061Handicap: 10Posts: 2,112 Platinum Tees
    Joined:  #229

    On -, @kgeorge78 . On the sim it was pretty good. not too high of a ball flight and didnt seem to balloon. I really like the KBS stock shaft that is in it. Good spin as well.
    Posted:
    Driver: Titleist TS2 9.5* Tensei Pro White 60
    4W: PING G410 16.5* Diamana D+ Limited 70
    4HY: PING G410 21* Accra FX 300H
    Irons: PING G410 5-UW Project X LZ 120
    Wedges: CBX2 54/12/Full Face 58/10 DG 115
    Putter: Bettinardi QB6 Carbon Limited
    Ball: Titleist ProV1x #12
    WITB
  • AG12AG12 Members  2112WRX Points: 1,061Handicap: 10Posts: 2,112 Platinum Tees
    Joined:  #230

    Since the ATV grind is backordered I was going to wait but couldn’t resist on a gently used 60* with ATV.

    Posted:
    Driver: Titleist TS2 9.5* Tensei Pro White 60
    4W: PING G410 16.5* Diamana D+ Limited 70
    4HY: PING G410 21* Accra FX 300H
    Irons: PING G410 5-UW Project X LZ 120
    Wedges: CBX2 54/12/Full Face 58/10 DG 115
    Putter: Bettinardi QB6 Carbon Limited
    Ball: Titleist ProV1x #12
    WITB
  • AG12AG12 Members  2112WRX Points: 1,061Handicap: 10Posts: 2,112 Platinum Tees
    Joined:  edited May 19, 2019 #231

    Question for you guys I got a deal on a used 56* hi toe and when I got home I realized the shaft label says hi rev 2.0 120

    But my 60 degree hi toe hi rev shaft says 115.

    The Taylormade website has the hi rev 2.0 115 as the stock shaft. Conventional wisdom tells me that that whoever had the 56 before me slapped an aftermarket 120 shaft in it. My only curiosity is the shaft label is copper like the 115. Is the 120 stock for the 56?

    Thanks as always guys

    *****EDIT*****

    Never mind I saw on the custom components for TM they offer both 115 and 120 in the HiRev shafts with the copper shaft label. Now I have a used 56 with 125g shaft and 60 with 115g shaft. Any sense is matching the 125g shaft in the 60 as well?

    Posted:
    Driver: Titleist TS2 9.5* Tensei Pro White 60
    4W: PING G410 16.5* Diamana D+ Limited 70
    4HY: PING G410 21* Accra FX 300H
    Irons: PING G410 5-UW Project X LZ 120
    Wedges: CBX2 54/12/Full Face 58/10 DG 115
    Putter: Bettinardi QB6 Carbon Limited
    Ball: Titleist ProV1x #12
    WITB
  • dpb5031dpb5031 Jupiter, FLMembers  5877WRX Points: 1,443Posts: 5,877 Titanium Tees
    Joined:  #232

    On -, @AG12 said:

    Question for you guys I got a deal on a used 56* hi toe and when I got home I realized the shaft label says hi rev 2.0 120

    But my 60 degree hi toe hi rev shaft says 115.

    The Taylormade website has the hi rev 2.0 115 as the stock shaft. Conventional wisdom tells me that that whoever had the 56 before me slapped an aftermarket 120 shaft in it. My only curiosity is the shaft label is copper like the 115. Is the 120 stock for the 56?

    Thanks as always guys

    *****EDIT*****

    Never mind I saw on the custom components for TM they offer both 115 and 120 in the HiRev shafts with the copper shaft label. Now I have a used 56 with 125g shaft and 60 with 115g shaft. Any sense is matching the 125g shaft in the 60 as well?

    They offer both the 115 and 120 HiRevs through their "custom options." Interestung that the 115 is touted as lower launch than the 120.

    I have the 115 in my 64 (bent to 62) and love that I can flight it down. Even on full swings it carrys the same yardage with lower peak height than my previous Ping 60

    Posted:
    USGA Index: ~0

    WITB:
    Ping G410 LST 9 degree - Tour AD IZ 6x
    Ping G410 LST - Fujikura Pro TourSpec 73 
    Kasco K2K 33 - Fujikura Pro TourSpec 73 
    Callaway RazrX Tour 4h - Tour 95 shaft
    Ping i200 5-UW (2 flat) - Nippon Modus 105X
    Taylormade HiToe 54 (bent to 55 & 2 flat)
    Taylormade HiToe 64 (Bent to 62 & 2 flat)
    Palmer AP30R putter (circa 1960s)
    Taylormade TP5X Ball
  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • AG12AG12 Members  2112WRX Points: 1,061Handicap: 10Posts: 2,112 Platinum Tees
    Joined:  #233

    On -, @dpb5031 said:

    On -, @AG12 said:

    Question for you guys I got a deal on a used 56* hi toe and when I got home I realized the shaft label says hi rev 2.0 120

    But my 60 degree hi toe hi rev shaft says 115.

    The Taylormade website has the hi rev 2.0 115 as the stock shaft. Conventional wisdom tells me that that whoever had the 56 before me slapped an aftermarket 120 shaft in it. My only curiosity is the shaft label is copper like the 115. Is the 120 stock for the 56?

    Thanks as always guys

    *****EDIT*****

    Never mind I saw on the custom components for TM they offer both 115 and 120 in the HiRev shafts with the copper shaft label. Now I have a used 56 with 125g shaft and 60 with 115g shaft. Any sense is matching the 125g shaft in the 60 as well?

    They offer both the 115 and 120 HiRevs through their "custom options." Interestung that the 115 is touted as lower launch than the 120.

    I have the 115 in my 64 (bent to 62) and love that I can flight it down. Even on full swings it carrys the same yardage with lower peak height than my previous Ping 60

    Worth the money to change the 56* with the 125g shaft to the 115 so it matches the lob? My iron set has PX LZ 120g shafts

    Posted:
    Driver: Titleist TS2 9.5* Tensei Pro White 60
    4W: PING G410 16.5* Diamana D+ Limited 70
    4HY: PING G410 21* Accra FX 300H
    Irons: PING G410 5-UW Project X LZ 120
    Wedges: CBX2 54/12/Full Face 58/10 DG 115
    Putter: Bettinardi QB6 Carbon Limited
    Ball: Titleist ProV1x #12
    WITB
  • dpb5031dpb5031 Jupiter, FLMembers  5877WRX Points: 1,443Posts: 5,877 Titanium Tees
    Joined:  #234

    On -, @AG12 said:

    On -, @dpb5031 said:

    On -, @AG12 said:

    Question for you guys I got a deal on a used 56* hi toe and when I got home I realized the shaft label says hi rev 2.0 120

    But my 60 degree hi toe hi rev shaft says 115.

    The Taylormade website has the hi rev 2.0 115 as the stock shaft. Conventional wisdom tells me that that whoever had the 56 before me slapped an aftermarket 120 shaft in it. My only curiosity is the shaft label is copper like the 115. Is the 120 stock for the 56?

    Thanks as always guys

    *****EDIT*****

    Never mind I saw on the custom components for TM they offer both 115 and 120 in the HiRev shafts with the copper shaft label. Now I have a used 56 with 125g shaft and 60 with 115g shaft. Any sense is matching the 125g shaft in the 60 as well?

    They offer both the 115 and 120 HiRevs through their "custom options." Interestung that the 115 is touted as lower launch than the 120.

    I have the 115 in my 64 (bent to 62) and love that I can flight it down. Even on full swings it carrys the same yardage with lower peak height than my previous Ping 60

    Worth the money to change the 56* with the 125g shaft to the 115 so it matches the lob? My iron set has PX LZ 120g shafts

    No way. I wouldn't waste the time, effort, and money. Yours should match fine with the PX LZs, plus....in wedges, with such short shaft lengths, it's nothing to be concerned about. The 115 in your 60 might be a tad lower launching, but I find that to be a good thing in my 60 which I use mostly for partial swings anyway

    Posted:
    USGA Index: ~0

    WITB:
    Ping G410 LST 9 degree - Tour AD IZ 6x
    Ping G410 LST - Fujikura Pro TourSpec 73 
    Kasco K2K 33 - Fujikura Pro TourSpec 73 
    Callaway RazrX Tour 4h - Tour 95 shaft
    Ping i200 5-UW (2 flat) - Nippon Modus 105X
    Taylormade HiToe 54 (bent to 55 & 2 flat)
    Taylormade HiToe 64 (Bent to 62 & 2 flat)
    Palmer AP30R putter (circa 1960s)
    Taylormade TP5X Ball
  • puttingmattputtingmatt puttingmatt Summer/ Michigan-- Winter/ FloridaMembers  5472WRX Points: 508Handicap: 6Posts: 5,472 Titanium Tees
    Joined:  edited May 21, 2019 #235

    For those playing the 56* wedge, how versatile is it
    laying it open on 1/2 and 3/4 length shots? Or are you strictly using it in bunkers ? Is there a fair amount of relief in the heel for the standard bounce.

    Posted:


    Play Golf.....Play Blades......Play Something Else.....Just Go Play.....

    4 HC
  • AG12AG12 Members  2112WRX Points: 1,061Handicap: 10Posts: 2,112 Platinum Tees
    Joined:  #236

    On -, @dpb5031 said:

    On -, @AG12 said:

    On -, @dpb5031 said:

    On -, @AG12 said:

    Question for you guys I got a deal on a used 56* hi toe and when I got home I realized the shaft label says hi rev 2.0 120

    But my 60 degree hi toe hi rev shaft says 115.

    The Taylormade website has the hi rev 2.0 115 as the stock shaft. Conventional wisdom tells me that that whoever had the 56 before me slapped an aftermarket 120 shaft in it. My only curiosity is the shaft label is copper like the 115. Is the 120 stock for the 56?

    Thanks as always guys

    *****EDIT*****

    Never mind I saw on the custom components for TM they offer both 115 and 120 in the HiRev shafts with the copper shaft label. Now I have a used 56 with 125g shaft and 60 with 115g shaft. Any sense is matching the 125g shaft in the 60 as well?

    They offer both the 115 and 120 HiRevs through their "custom options." Interestung that the 115 is touted as lower launch than the 120.

    I have the 115 in my 64 (bent to 62) and love that I can flight it down. Even on full swings it carrys the same yardage with lower peak height than my previous Ping 60

    Worth the money to change the 56* with the 125g shaft to the 115 so it matches the lob? My iron set has PX LZ 120g shafts

    No way. I wouldn't waste the time, effort, and money. Yours should match fine with the PX LZs, plus....in wedges, with such short shaft lengths, it's nothing to be concerned about. The 115 in your 60 might be a tad lower launching, but I find that to be a good thing in my 60 which I use mostly for partial swings anyway

    Cool thanks man I appreciate the insight and response!

    Posted:
    Driver: Titleist TS2 9.5* Tensei Pro White 60
    4W: PING G410 16.5* Diamana D+ Limited 70
    4HY: PING G410 21* Accra FX 300H
    Irons: PING G410 5-UW Project X LZ 120
    Wedges: CBX2 54/12/Full Face 58/10 DG 115
    Putter: Bettinardi QB6 Carbon Limited
    Ball: Titleist ProV1x #12
    WITB
  • taylormade4lifetaylormade4life Members  1465WRX Points: 201Handicap: 4Posts: 1,465 Platinum Tees
    Joined:  edited May 21, 2019 #237

    On -, @puttingmatt said:

    For those playing the 56* wedge, how versatile is it
    laying it open on 1/2 and 3/4 length shots? Or are you strictly using it in bunkers ? Is there a fair amount of relief in the heel for the standard bounce.

    I have only had mine for a brief period but I found no issue with my 56/60 (both have the 4-way grind) to hit any sort of shot. I used it from the sand (super easy out), pitches and chips and liked how the club head set up. It felt like I could lower or raise my hands and have no issue with turf interaction on the sole/lie angle.

    I also really liked that I could swing 75% and hit a little lower and more piercing shot than with my standard milled grind. I honestly wasn’t a believer that it would lower the launch but it did a little.

    I am already preferrring the copper look to the satin and am looking for a hi toe 52 to replace my MG 52. Kinda stinks I shopped around to build my 52/56/60 milled grinds with steelfiber to now be in hi toe with stock kbs shafts.. 😂

    Posted:
  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • TrueWRXTrueWRX Members  2042WRX Points: 368Posts: 2,042 Platinum Tees
    Joined:  #238

    On -, @taylormade4life said:

    On -, @puttingmatt said:

    For those playing the 56* wedge, how versatile is it
    laying it open on 1/2 and 3/4 length shots? Or are you strictly using it in bunkers ? Is there a fair amount of relief in the heel for the standard bounce.

    I have only had mine for a brief period but I found no issue with my 56/60 (both have the 4-way grind) to hit any sort of shot. I used it from the sand (super easy out), pitches and chips and liked how the club head set up. It felt like I could lower or raise my hands and have no issue with turf interaction on the sole/lie angle.

    I also really liked that I could swing 75% and hit a little lower and more piercing shot than with my standard milled grind. I honestly wasn’t a believer that it would lower the launch but it did a little.

    I am already preferrring the copper look to the satin and am looking for a hi toe 52 to replace my MG 52. Kinda stinks I shopped around to build my 52/56/60 milled grinds with steelfiber to now be in hi toe with stock kbs shafts.. 😂

    Hows the 4-way grind on flops? I had the ATV couldnt flop it but was great everywhere else

    Still hoping for a LB version release

    Posted:


  • taylormade4lifetaylormade4life Members  1465WRX Points: 201Handicap: 4Posts: 1,465 Platinum Tees
    Joined:  edited May 21, 2019 #239

    On -, @PatsNation said:

    On -, @taylormade4life said:

    On -, @puttingmatt said:

    For those playing the 56* wedge, how versatile is it
    laying it open on 1/2 and 3/4 length shots? Or are you strictly using it in bunkers ? Is there a fair amount of relief in the heel for the standard bounce.

    I have only had mine for a brief period but I found no issue with my 56/60 (both have the 4-way grind) to hit any sort of shot. I used it from the sand (super easy out), pitches and chips and liked how the club head set up. It felt like I could lower or raise my hands and have no issue with turf interaction on the sole/lie angle.

    I also really liked that I could swing 75% and hit a little lower and more piercing shot than with my standard milled grind. I honestly wasn’t a believer that it would lower the launch but it did a little.

    I am already preferrring the copper look to the satin and am looking for a hi toe 52 to replace my MG 52. Kinda stinks I shopped around to build my 52/56/60 milled grinds with steelfiber to now be in hi toe with stock kbs shafts.. 😂

    Hows the 4-way grind on flops? I had the ATV couldnt flop it but was great everywhere else

    Still hoping for a LB version release

    I have had zero issues with it thus far. I tend to play my short game shots with the “bounce” and didn’t notice any issues. I didn’t have any hard pan lies which may be the ultimate test.

    I plan to do a long short game session with them this weekend.

    Posted:
    Post edited by taylormade4life on
  • puttingmattputtingmatt puttingmatt Summer/ Michigan-- Winter/ FloridaMembers  5472WRX Points: 508Handicap: 6Posts: 5,472 Titanium Tees
    Joined:  #240

    On -, @taylormade4life said:

    On -, @PatsNation said:

    On -, @taylormade4life said:

    On -, @puttingmatt said:

    For those playing the 56* wedge, how versatile is it
    laying it open on 1/2 and 3/4 length shots? Or are you strictly using it in bunkers ? Is there a fair amount of relief in the heel for the standard bounce.

    I have only had mine for a brief period but I found no issue with my 56/60 (both have the 4-way grind) to hit any sort of shot. I used it from the sand (super easy out), pitches and chips and liked how the club head set up. It felt like I could lower or raise my hands and have no issue with turf interaction on the sole/lie angle.

    I also really liked that I could swing 75% and hit a little lower and more piercing shot than with my standard milled grind. I honestly wasn’t a believer that it would lower the launch but it did a little.

    I am already preferrring the copper look to the satin and am looking for a hi toe 52 to replace my MG 52. Kinda stinks I shopped around to build my 52/56/60 milled grinds with steelfiber to now be in hi toe with stock kbs shafts.. 😂

    Hows the 4-way grind on flops? I had the ATV couldnt flop it but was great everywhere else

    Still hoping for a LB version release

    I have had zero issues with it thus far. I tend to play my short game shots with the “bounce” and didn’t notice any issues. I didn’t have any hard pan lies which may be the ultimate test.

    I plan to do a long short game session with them this weekend.

    Hope you can give us a review of your session, I am considering adding this wedge to the bag.

    Posted:


    Play Golf.....Play Blades......Play Something Else.....Just Go Play.....

    4 HC
  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • TrueWRXTrueWRX Members  2042WRX Points: 368Posts: 2,042 Platinum Tees
    Joined:  #241

    On -, @taylormade4life said:

    On -, @PatsNation said:

    On -, @taylormade4life said:

    On -, @puttingmatt said:

    For those playing the 56* wedge, how versatile is it
    laying it open on 1/2 and 3/4 length shots? Or are you strictly using it in bunkers ? Is there a fair amount of relief in the heel for the standard bounce.

    I have only had mine for a brief period but I found no issue with my 56/60 (both have the 4-way grind) to hit any sort of shot. I used it from the sand (super easy out), pitches and chips and liked how the club head set up. It felt like I could lower or raise my hands and have no issue with turf interaction on the sole/lie angle.

    I also really liked that I could swing 75% and hit a little lower and more piercing shot than with my standard milled grind. I honestly wasn’t a believer that it would lower the launch but it did a little.

    I am already preferrring the copper look to the satin and am looking for a hi toe 52 to replace my MG 52. Kinda stinks I shopped around to build my 52/56/60 milled grinds with steelfiber to now be in hi toe with stock kbs shafts.. 😂

    Hows the 4-way grind on flops? I had the ATV couldnt flop it but was great everywhere else

    Still hoping for a LB version release

    I have had zero issues with it thus far. I tend to play my short game shots with the “bounce” and didn’t notice any issues. I didn’t have any hard pan lies which may be the ultimate test.

    I plan to do a long short game session with them this weekend.

    Sweet let me know thats my biggest thing. Not that I hit a flop a lot but I need to have the ability too if needed

    I thought the hi toe atv was a 10 everywhere except for flops

    Posted:


10

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.