Ping's new G410 LST driver

11314151719

Comments

  • Ryan5508Ryan5508 Members Posts: 555 ✭✭

    I generally hit high toe side.
    I don't believe I have any shorter tees than 3 1/4" currently in the garage. They also do not go very far down into the mat but the ball is no more then 1/2 above the crown grounding the club at address with the tall tees. I have a bad habit of hitting the ground when I tee it low and have generally shied away from doing so.

    Ping G410 Plus - Mitsubishi Kuro Kage XD 70TX
    Callaway Epic SZ 3 wood - Aldila Rip Alpha
    Callaway Apex 2019 3h - Project X Catalyst
    Ping i210 - Pw-3 X100
    Ping Glide - 50/56/60
    Taylormade - Spider X slant neck

  • ValtielValtiel Konica-Minolta Bizhub Members Posts: 2,283 ✭✭

    @Ryan5508 said:
    I generally hit high toe side.
    I don't believe I have any shorter tees than 3 1/4" currently in the garage. They also do not go very far down into the mat but the ball is no more then 1/2 above the crown grounding the club at address with the tall tees. I have a bad habit of hitting the ground when I tee it low and have generally shied away from doing so.

    Ah gotcha. High toe is definitely the low spin zone though, that explains the numbers. There isn't much that a shaft will do to help unless something about the shaft also changes your strike location. Getting your strike away from the toe and slightly more centered would bring those spin numbers up a hair. I find that I live in the high toe range when I have the ball a bit too far forward in my stance and/or i'm losing a little too much posture at impact. Focusing on staying down and maybe moving the ball position back just a touch helps me with that.

    Taylormade M1 430 8.5* Tensei Pro Orange V2 70TX || Titleist 915D3 8.5* Diamana Kai'li 80x
    Callaway XHot 3Deep Pro 14.5* Fujikura Motore VC 8.3 Tour Spec X || Nike SQ2 13* Diamana Blueboard 83x
    Nike Tour Issue SQ2 17* Diamana Blueboard 103x || SQ2 15* Diamana Blueboard 93x
    PING Anser 20* Aldila Rogue Black 110MSI 105h Tour-X || Taylormade V-Steel 21* Project X Rifle Satin 6.5
    Mizuno MP-H4 3i 21* Project X PXi 7.0
    Mizuno MP-H4 4i 24* Project X PXi 7.0
    Mizuno MP-59 4i-PW 24*- 48* Brunswick Precision Rifle FCM 7.0
    Vokey Mild Raw 8620 54* Brunswick Precision Rifle FCM 7.0
    Vokey  SM6 58* Oil Can Low Bounce K-Grind Brunswick Precision FCM 7.3 SSx1
    Vokey Special 62* Black Oxide V-Grind Brunswick Precision FCM 7.3 SSx2
    Scotty Cameron Santa Fe Bullseye shaft

    WITB Thread
  • desailledesaille Members Posts: 1,710 ✭✭
    edited Jul 1, 2019 5:57pm #484

    @greenadam21 said:

    @desaille said:

    @desaille said:

    @gambit said:

    @desaille said:
    G410 LST is the best yet.
    Less pointy toe like the former g400 lst, I've gone through 7 of these heads in a love hate relationship & trying every new driver out there thinking it's better than the g400 lst.
    The new G410 LST shape is better and sounds great, even without hotmelt. My TD might be a bit longer on some hits but I have no clue where the TD is going. The G410 LST was a simple drop in and go (g400 lst will be up on BST soon)
    Testing a PO 60tx and Diamana DF 60TX

    Can you let us know how those two shafts compared in that head? I have the PO in the G400 LST, but want to try the DF too.

    PO 60tx all day long. Can swing it all day long, just can't go after it (probably a good thing)
    The DF has a tendency to go left (a hard left). Probably the weighting on the DF but even tweaking, it just doesn't feel the same. Could probably tip the DF even more but the setup would border being short.
    Been testing against my TD, still don't know where the TD goes even though its straight straight.

    DF all day long. The PO (planet Orange) seems to spin a touch more on center hits.
    I'm usually 10/11 o'clock above center but when I get closer to center, the PO spins.
    Life of a WRXer

    So I also have the TD callaway. thinking of testing the ping but would love some feedback on it from others.

    Tested the TD with an original T1100 75g 6.5 tipped 1", it's pretty good, just don't know where it goes but it's straight. It's the classic driving range driver - straight as can be. Can't keep it on the planet when on the course.
    Testing now with a TPT - 15 mkw something, what a terrible naming scheme.
    Weird thing with the TPT, it's extremely tip heavy compared to the T1100. Didn't think the T1100 was that counter, as the Planet Orange is even more counter.
    The TD head has 18g (2g front, 16g back) and about 3g hotmelt (on sole by EP [of epic])
    The T1100 at 45" is D3
    The TPT touch under 45" is D8
    Do have a lighter sliding weight to test with :)

  • Deuce78Deuce78 Members Posts: 1,256 ✭✭

    Is your T1100 in the ping? I have the T1100 and love it. I think I will be putting the diamana DF 70tx on the bst soon. Also a great shaft....just prefer the T1100 for me....but man the LST has been great so far. Hitting fairways and long. I have a 3 gram and 10 gram weight. Right now I play it at almost 46". Flat lie works great when adding length. 3wood and 5 wood are great too. I am curious to try the 3wood in LST, but I figured I wanted more forgiveness than distance with the 3w. But hey I can do that with the 5w. I think I will order an LS 3w...haha.

    TM M5 [email protected] HZRDUS T1100 65g 6.5
    PING G410 [email protected] HZRDUS T1100 75g 6.5 
    PING G410 17.5 HZRDUS T1100 85g 6.5
    Nike vapor fly pro 2 iron black tie 105x
    MP32/712mb/MP69/714mb/MP4/s55/900 Tour/iblade/5-7-965 combo/MP63/iblade 3-PW
    Vokey sm6/Tour Gorge/TVD/black Glides
    NIPPON 1150gh X flex/kbs tour V 120x/Steelfiber 125x
    Kuchar #1/Lamont Mann Custom ARM LOCK/custom Arm Locks-Scotty, Odyssey, TM
  • desailledesaille Members Posts: 1,710 ✭✭

    @Deuce78 said:
    Is your T1100 in the ping? I have the T1100 and love it. I think I will be putting the diamana DF 70tx on the bst soon. Also a great shaft....just prefer the T1100 for me....but man the LST has been great so far. Hitting fairways and long. I have a 3 gram and 10 gram weight. Right now I play it at almost 46". Flat lie works great when adding length. 3wood and 5 wood are great too. I am curious to try the 3wood in LST, but I figured I wanted more forgiveness than distance with the 3w. But hey I can do that with the 5w. I think I will order an LS 3w...haha.

    Yeah, the t1100 is too short for the ping. Will need to find a new T1100 for the Ping G410 lst.
    The LST is a mad bomber

  • provxprovx Members Posts: 838 ✭✭

    Hit the 9* g410lst. The evenflow black 6.5 was spinning around 2000 rpm for me, but felt a little whippy. Compared to the orange and the alta that were 3k plus. Anyone else seeing these low spin rates with the evenflow black? I rarely spin anything under 3000. Seemed odd to me a shaft that didn’t feel stout would cut the spin out. Any shafts out there like the ef black that feel more stable?

    Ping G400 Max 9* Tensei Pro Orange 70TX
    Ping G400 3 crossover Alta stiff
    Callaway Apex 4-SW recoil 780 stiff
    Cleveland cbx 60* recoil stiff
    Biomech Acculock
    Snell MTB Black
  • Kale_mKale_m Members Posts: 1,850 ✭✭

    @provx said:
    Hit the 9* g410lst. The evenflow black 6.5 was spinning around 2000 rpm for me, but felt a little whippy. Compared to the orange and the alta that were 3k plus. Anyone else seeing these low spin rates with the evenflow black? I rarely spin anything under 3000. Seemed odd to me a shaft that didn’t feel stout would cut the spin out. Any shafts out there like the ef black that feel more stable?

    Feel with low spin?

    Atx tour green
    Synergy black
    Rogue white

    Taylormade M6 9.0 (set to 7.5) Tensei Pro Orange 70tx
    Taylormade M5 rocket 14* Tensei Pro orange 80tx 
    Taylormade 790 UDI 2 iron Tensei Pro White 90tx
    Callaway Apex MB Raw TIX100
    Callaway md4 52/56
    Tm hi toe 60
    Tm spider x 35” navy with true path alignment
  • ei19ei19 Members Posts: 90 ✭✭

    My 10.5 with a Tensei orange stiff came in yesterday. Played 9 last night and couldn’t be happier. Able to hit it high and low when teed lower. I was able to work a fade and a small draw. I don’t even think I want to try the flat setting or move the weight. Sits perfect to my eye!

  • endyendy Members Posts: 3,252 ✭✭

    @provx said:
    Hit the 9* g410lst. The evenflow black 6.5 was spinning around 2000 rpm for me, but felt a little whippy. Compared to the orange and the alta that were 3k plus. Anyone else seeing these low spin rates with the evenflow black? I rarely spin anything under 3000. Seemed odd to me a shaft that didn’t feel stout would cut the spin out. Any shafts out there like the ef black that feel more stable?

    I ran into the same issue although I was spinning the black higher than that. I tested the Aldila Rogue Silver 130 MSI 70TX, Graphite Design AD VR 7TX, and VR 7X. I ultimately settled on the VR 7X but the other two Shafts were very close and definitely felt more solid than the EF Black. You WILL NOT go left with any of these Shafts and they still retain great feel throughout.

    Srixon Z785 9.5* Fuji Ventus 7X
    Srixon F85 13.5* Atmos Black TS 8TX
    Srixon H85 19* Oban Kiyoshi Black 90X
    Srixon Z785 4-PW KBS $-Taper 130X
    Cleveland RTX-4 50/54/60 TI S400
    Toulon Garage Columbus
    Srixon Z-Star XV
  • provxprovx Members Posts: 838 ✭✭

    @endy said:

    @provx said:
    Hit the 9* g410lst. The evenflow black 6.5 was spinning around 2000 rpm for me, but felt a little whippy. Compared to the orange and the alta that were 3k plus. Anyone else seeing these low spin rates with the evenflow black? I rarely spin anything under 3000. Seemed odd to me a shaft that didn’t feel stout would cut the spin out. Any shafts out there like the ef black that feel more stable?

    I ran into the same issue although I was spinning the black higher than that. I tested the Aldila Rogue Silver 130 MSI 70TX, Graphite Design AD VR 7TX, and VR 7X. I ultimately settled on the VR 7X but the other two Shafts were very close and definitely felt more solid than the EF Black. You WILL NOT go left with any of these Shafts and they still retain great feel throughout.

    Thank you. On a side note for those interested in this head i found something unusual. My center and heel strikes were sub 2000 spin or thereabouts, however my toe strikes were spinning up at 3500ish. Now maybe it was a fluke, but maybe this head is designed to not nose dive snap hook on toe strikes like other low spin heads. Just what i was finding.

    Ping G400 Max 9* Tensei Pro Orange 70TX
    Ping G400 3 crossover Alta stiff
    Callaway Apex 4-SW recoil 780 stiff
    Cleveland cbx 60* recoil stiff
    Biomech Acculock
    Snell MTB Black
  • jrshelbyjrshelby Members Posts: 1,179 ✭✭

    Has anyone tried animal style with 2 weights or even 3 weights. If the stock is 16 it’s feasible to put a 10 and 6 gram weights to still create a bias one way or another. Or putting 2 5.5 weights on the outside draw fade positions and a 3.5 in the neutral position,

    PING G410 LST DL 8.5° EVENFLOW 75X
    PING G410 LST 13° EVENFLOW 85X
    PING G410 2/17°, 4/23° CROSSOVER DG 120 X100
    PING Blueprint 5-PW DG 120 X100 
    Stealth Glide 2.0 50°, 54° 58° DG 120 X100 
    PXG GEN2 BRANDON HEEL SHAFTED NECK
  • nickosbadnickosbad Members Posts: 322 ✭✭

    I managed to hit this yesterday and was very impressed, ball speed was up compared to my F9 (mainly due to finding the middle better) and was stuck deciding between the Plus/LST. I didn’t really see much difference in spin although I was only able to hit the 10.5 in each head.
    I ended up ordering a 9’ Plus with Evenflow Black Stiff as I went for forgiveness over slightly lower potential spin.....now though I’m having second thoughts!
    Is there much difference in forgiveness with the LST/Plus and is the Plus more fade bias (my bad shot is turning it over left)

    Cobra F9 Yellow 9' HZRDUS Smoke 6.0
    Cobra F9 Tour 4-5 HXRDUS Smoke 6.0
    Taylormade P790 #3 C-Taper 120 Stiff
    Taylormade P770 4-PW C-Taper 120 Stiff
    Nike Engage 52' Square
    Nike Engage 56' Square
    Nike Engage 58' Dual Sole
    Nike Engage 60' Toe Sweep
    Taylormade Spider X Copper
    Ping Anser Nickel
    Ping DLX Cart / 4 Series White Tour Carry Bag
  • asumnerdawgasumnerdawg Members Posts: 373 ✭✭

    @nickosbad said:
    I managed to hit this yesterday and was very impressed, ball speed was up compared to my F9 (mainly due to finding the middle better) and was stuck deciding between the Plus/LST. I didn’t really see much difference in spin although I was only able to hit the 10.5 in each head.
    I ended up ordering a 9’ Plus with Evenflow Black Stiff as I went for forgiveness over slightly lower potential spin.....now though I’m having second thoughts!
    Is there much difference in forgiveness with the LST/Plus and is the Plus more fade bias (my bad shot is turning it over left)

    Only supposed to be 300-400 rpm difference, and it is my understanding that the LST is more open/fade biased at neutral address. There is a flat setting in both and also a fade bias spot for the weighting on the back of the club. I have the same club you have currently in shipping to me, except my evenflow black is 6.5 stiffness in 65 series. I will report back as it is supposed to be here by Tues 7/9

    Gamer/Backup
    Driver: Cobra F8+ with Evenflow Blue 65 6.5; Cobra LTD PRO w/ Speeder 661 iv
    3wd: TEE CB Pro 14.5 Speeder 757 stiff; Callaway XHot 3w
    5wd: Cobra F6 Baffler set at 17.5; Titleist 917 2H
    3H- Ping G with Evenflow Blue 85 6.0; N/A
    4 iron: G400 green dot CFS stiff, It's stamped 5 iron but power spec at 22* I use it as 4 iron; N/A
    5-PW: Ping i15 green dot AWT stiff; i200 w/ CFS stiff 3-PW
    52/12 F: Vokey sm7 2 up; Ping Glide 2.0 Stealth SS 52
    58/12 D: Vokey sm7 2 up; Ping Glide 2.0 Stealth SS 58
    Putter: Ping Anser Milled 5; Nike Method Matter B2-05
    Ball: Titleist Pro V1 X
  • bladehunterbladehunter Today was a good day... south carolinaMembers Posts: 27,028 ✭✭

    @Kale_m said:

    @Ryan5508 said:
    Well here are some numbers with the 410 plus in the ventus. 6 swings in total. Little slower swing since I just got home from work. I was launching higher and even less spin than the lst..... Now what to do.

    Feel and looks wise they are hard to tell apart. The plus comes in 2g lighter in the head vs the lst.

    Would not want to spin it any less then that. That is actually to low of you ask me for actual on the course situations. Any miss hit and that thing is not staying in the air

    Mishit is going to add spin.

    I agree that’s too low to control. But Mishits aren’t the issue. It’s the directional miss going off the planet. As in center struck push or pull. Not going to curve back. Just float into outer space.

    TM Tour M6 11.2 * KK Tini XTS 70X
    Ping G410 15.5* Graphite Design ADDI 8x
    Ping G410 21* ADDI 105x 
    Ping Blueprint  3-PW   Modus 130X 
    Ping Glide Forged   54 60 S400
    Cameron GSS 009 1.5 tungsten sole weights, sound slot


  • Ryan5508Ryan5508 Members Posts: 555 ✭✭

    Thankfully I am getting more around 2300 with the KK in a plus head. Most low spinners were around 2000 with a misshit hitting 2800-3000 spin.
    The ventus was a wash spin wise between the lst and plus. I ended up selling the LST and ventus yesterday on the bst here.
    I would be interested in seeing if a ventus 6x does indeed spin more than the 7x since it was a fantastic shaft.

    outside I didn't notice any forgiveness differences between the LST, plus or MAX. All three are great heads for the right person.

    Ping G410 Plus - Mitsubishi Kuro Kage XD 70TX
    Callaway Epic SZ 3 wood - Aldila Rip Alpha
    Callaway Apex 2019 3h - Project X Catalyst
    Ping i210 - Pw-3 X100
    Ping Glide - 50/56/60
    Taylormade - Spider X slant neck

  • Buckets2Buckets2 Members Posts: 2,421 ✭✭

    anyone letting go of an LST?

  • Kale_mKale_m Members Posts: 1,850 ✭✭

    @bladehunter said:

    @Kale_m said:

    @Ryan5508 said:
    Well here are some numbers with the 410 plus in the ventus. 6 swings in total. Little slower swing since I just got home from work. I was launching higher and even less spin than the lst..... Now what to do.

    Feel and looks wise they are hard to tell apart. The plus comes in 2g lighter in the head vs the lst.

    Would not want to spin it any less then that. That is actually to low of you ask me for actual on the course situations. Any miss hit and that thing is not staying in the air

    Mishit is going to add spin.

    I agree that’s too low to control. But Mishits aren’t the issue. It’s the directional miss going off the planet. As in center struck push or pull. Not going to curve back. Just float into outer space.

    A mishit out on the toe drops spin. So if your spin is to low to begin with then it drops it so low that the ball will dive out of the air like a wounded duck.. a mishit low in the face will increase spin yes

    Taylormade M6 9.0 (set to 7.5) Tensei Pro Orange 70tx
    Taylormade M5 rocket 14* Tensei Pro orange 80tx 
    Taylormade 790 UDI 2 iron Tensei Pro White 90tx
    Callaway Apex MB Raw TIX100
    Callaway md4 52/56
    Tm hi toe 60
    Tm spider x 35” navy with true path alignment
  • juggernaut0629juggernaut0629 Members Posts: 1,004 ✭✭

    @jrshelby said:
    Has anyone tried animal style with 2 weights or even 3 weights. If the stock is 16 it’s feasible to put a 10 and 6 gram weights to still create a bias one way or another. Or putting 2 5.5 weights on the outside draw fade positions and a 3.5 in the neutral position,

    I'll be doing this for tomorrow's round. Been thinking of it for some time now

    Ping G LST 9*
    Callaway Epic 3w & 5w Diamana Thump
    X2 Hot #4 Hybrid Matrix White Tie
    Ping ie1 5 - GW Nippon SPO
    Cleveland RTX-3 54* 58*
  • jrshelbyjrshelby Members Posts: 1,179 ✭✭

    @juggernaut0629 said:

    @jrshelby said:
    Has anyone tried animal style with 2 weights or even 3 weights. If the stock is 16 it’s feasible to put a 10 and 6 gram weights to still create a bias one way or another. Or putting 2 5.5 weights on the outside draw fade positions and a 3.5 in the neutral position,

    I'll be doing this for tomorrow's round. Been thinking of it for some time now

    Ok could you please let me know what you think?

    PING G410 LST DL 8.5° EVENFLOW 75X
    PING G410 LST 13° EVENFLOW 85X
    PING G410 2/17°, 4/23° CROSSOVER DG 120 X100
    PING Blueprint 5-PW DG 120 X100 
    Stealth Glide 2.0 50°, 54° 58° DG 120 X100 
    PXG GEN2 BRANDON HEEL SHAFTED NECK
  • juggernaut0629juggernaut0629 Members Posts: 1,004 ✭✭
    edited Jul 6, 2019 11:39pm #501

    @jrshelby said:

    @juggernaut0629 said:

    @jrshelby said:
    Has anyone tried animal style with 2 weights or even 3 weights. If the stock is 16 it’s feasible to put a 10 and 6 gram weights to still create a bias one way or another. Or putting 2 5.5 weights on the outside draw fade positions and a 3.5 in the neutral position,

    I'll be doing this for tomorrow's round. Been thinking of it for some time now

    Ok could you please let me know what you think?

    Definitely. I've got both the G410+ and the 410 LST all set up for tomorrow's round. I'll be testing both heads with the evenflow black 75g stiff & Tensei orange 60g X flex both @ 45" dead nut. Will look into bouncing between the heads in animal style double weights placed in the face & draw settings. I've done some testing already with the 410+ with the single 12g weight. Tensei orange 70g X flex @ 44.5". Dropped loft 1* then 1.5* . weight in heel, toe, & middle. Strangely the weight in the heel made me fade the ball more. Prefer the weight dead center. It's feel this new Ping brings to the table that is above all else. Workable in both directions. It's what sold me over the F9. I hope the LST is even better for than the 410+....Which will really say something! I even brought back my beloved G LST in a head to head with 410+....just to be sure, 410+ is just better. Love this fairway finder. Great club Ping.

    Ping G LST 9*
    Callaway Epic 3w & 5w Diamana Thump
    X2 Hot #4 Hybrid Matrix White Tie
    Ping ie1 5 - GW Nippon SPO
    Cleveland RTX-3 54* 58*
  • milesnotsmilesmilesnotsmiles Members Posts: 10 ✭✭

    Got a deal on a LST and Ventus, but I'm on vacation for another 3 weeks so they'll be sitting in a box at home waiting on my return sigh

  • juggernaut0629juggernaut0629 Members Posts: 1,004 ✭✭
    edited Jul 7, 2019 9:07pm #503

    Low down today's round. 410LST animal style, double 12g weights. 1 in the fade setting , 1 in the draw. Swingweight was high @ D9. Although I like heavy Swingweighted clubs, & usually play my driver @ D6 - D8. I didn't have the energy to swing D9 today with the tensei orange 60g X flex for 18 holes. I must say that animal style with this driver makes the club EXTREMELY stable. I miss hit a couple of tee shots with a bad swing, & yet the ball was WELL out there. When caught dead on the screws, it felt phenomenal. Ball flight was piercing the distance was insane. 1 of the longest drives I've hit in years. Soft 5 yard draw, dead center of a tight fairway. I can't stress enough how stable the club is.
    I'm going pick up a couple lighter weights & drop swingweight a couple points, keep it setup animal style. Never had the chance swing the Plus animal style. As I was putting the weights in the Plus and the screw broke when was tightening it. Using the supplied PING torque wrench. I couldn't believe it. So I guess PING will be getting a call for the Plus to be returned for repair.

    Ping G LST 9*
    Callaway Epic 3w & 5w Diamana Thump
    X2 Hot #4 Hybrid Matrix White Tie
    Ping ie1 5 - GW Nippon SPO
    Cleveland RTX-3 54* 58*
  • desailledesaille Members Posts: 1,710 ✭✭

    24 grams, wow!
    I was just thinking of finding a 9 and 3 (keeping to 12g) to put in the neutral and draw to get a more fade bias.
    But will say, this driver is stable and the flight is pretty **** good right now. straight to a touch cut. Only getting a draw now on swings when I'm way handsy, saving it

  • BankerBanker The SwampMembers Posts: 1,090 ✭✭

    After loving the 410 hybrid and 3 wood so much, I’m very tempted to drop the flash sz for the lst or plus..... the 410 line is legit.

    Epic Flash SZ 10.5 Phenom 60x
    G410 3 wood Accra t70x
    G410 19* hybrid KBS Hybrid Proto 95x
    G410 4-PW KBS 120 Tour
    Glide 2.0 54* ES
    Glide 2.0 58* ES
    Taylormade Spider Tour
  • jcg132jcg132 PTPOTCW StamvegasMembers Posts: 1,070 ✭✭
    edited Jul 8, 2019 12:47am #506

    @Banker said:
    After loving the 410 hybrid and 3 wood so much, I’m very tempted to drop the flash sz for the lst or plus..... the 410 line is legit.

    I’m loving the plus so much I’m ready to drop the Cally fairway and hybrid for G410s haha. Similar situation.

    Ping G410 Plus 9.5° - Mitsubishi Chemical Tensei CK Pro White 60 TX (44.75", Flat Setting, D4)
    Ping G410 16.5° - Project X Evenflow Black 75 6.0 (42.5", Flat Setting, D4)
    Ping G410 18° - Graphite Design Tour AD IZ Hybrid 85 S (40.5”, Flat Setting, D4)
    PXG 0311 XF Gen2 4 -  Oban CT-100 S (1.0° Weak, D4)
    PXG 0311 P Gen2 5-7 - Oban CT-115 S (D4)
    PXG 0311 T Gen2 8-9 - Oban CT-115 S (1.0° Strong, D4)
    PXG 0311 T Gen2 PW - Oban CT-115 S (1.0° Strong, D5)
    Vokey SM7 Raw 49.11°F - Oban CT-115 S (1.0° Flat, D5)
    Vokey WedgeWorks 54.12°D - True Temper Dynamic Gold S200 (2.0° Flat, D5)
    Vokey SM7 Raw 59.07°M - True Temper Dynamic Gold S200 (Smooth Grind Lines & Tour Grind, 2.0° Flat, D5)
    Scotty Cameron 009M Carbon - 34", 3.5°, 70°

    2019 Titleist Pro V1x
    Golf Pride MCC Plus4
    FootJoy Pure Touch Limited
    Sun Mountain C130S
    Clicgear Model 8.0
  • HedgehogHedgehog EUMembers Posts: 373 ✭✭

    I have the Tour 65X 45" and the Evenflow Black 6.0 Handcrafted tipped 0,5" and playing around 44,75". Evenflow Black still feels a bit whippy, but it likes to go straight when I mishit it off the toe, and a really good hit is maybe a bit longer than Tour shaft. But I have to say the Tour 65X is legit a good shaft, it likes to fade on me a bit more then the Evenflow.

    Where have you guys ordered weights? Would love a setup of 2 weights in neutral and draw, my factory weight is 14gr, friend has the same head and he had a 12gr weight.

    Ping G410+ 9° Tour 65X
    TM M6 15° AD DI 6x
    Ping G410 Hybrid 19° AD DI H 85x
    Ping iBlade 4-PW Modus3 105S
    RTX4 52/56/60° Tour Issue S400
    Scotty Cameron Fastback 2018
    Srixon Z-Star XV
  • Kale_mKale_m Members Posts: 1,850 ✭✭

    @Hedgehog said:
    I have the Tour 65X 45" and the Evenflow Black 6.0 Handcrafted tipped 0,5" and playing around 44,75". Evenflow Black still feels a bit whippy, but it likes to go straight when I mishit it off the toe, and a really good hit is maybe a bit longer than Tour shaft. But I have to say the Tour 65X is legit a good shaft, it likes to fade on me a bit more then the Evenflow.

    Where have you guys ordered weights? Would love a setup of 2 weights in neutral and draw, my factory weight is 14gr, friend has the same head and he had a 12gr weight.

    Golf works has the weights. But they are all pretty heavy. If you wanted a 2 weight setup the SW is going to be pretty high

    Taylormade M6 9.0 (set to 7.5) Tensei Pro Orange 70tx
    Taylormade M5 rocket 14* Tensei Pro orange 80tx 
    Taylormade 790 UDI 2 iron Tensei Pro White 90tx
    Callaway Apex MB Raw TIX100
    Callaway md4 52/56
    Tm hi toe 60
    Tm spider x 35” navy with true path alignment
  • Crooksc17Crooksc17 NJMembers Posts: 817 ✭✭

    @Kale_m said:

    @Hedgehog said:
    I have the Tour 65X 45" and the Evenflow Black 6.0 Handcrafted tipped 0,5" and playing around 44,75". Evenflow Black still feels a bit whippy, but it likes to go straight when I mishit it off the toe, and a really good hit is maybe a bit longer than Tour shaft. But I have to say the Tour 65X is legit a good shaft, it likes to fade on me a bit more then the Evenflow.

    Where have you guys ordered weights? Would love a setup of 2 weights in neutral and draw, my factory weight is 14gr, friend has the same head and he had a 12gr weight.

    Golf works has the weights. But they are all pretty heavy. If you wanted a 2 weight setup the SW is going to be pretty high

    I have the 12g weight in the fade spot and 10g in draw. With a playing length of 44” the SW is about D7. I bought a 5.5g weight off eBay that will replace the 12g weight to get the SW back to a D4-5 level. Hopefully will have the weight later this week

  • HedgehogHedgehog EUMembers Posts: 373 ✭✭

    @Crooksc17 said:

    @Kale_m said:

    @Hedgehog said:
    I have the Tour 65X 45" and the Evenflow Black 6.0 Handcrafted tipped 0,5" and playing around 44,75". Evenflow Black still feels a bit whippy, but it likes to go straight when I mishit it off the toe, and a really good hit is maybe a bit longer than Tour shaft. But I have to say the Tour 65X is legit a good shaft, it likes to fade on me a bit more then the Evenflow.

    Where have you guys ordered weights? Would love a setup of 2 weights in neutral and draw, my factory weight is 14gr, friend has the same head and he had a 12gr weight.

    Golf works has the weights. But they are all pretty heavy. If you wanted a 2 weight setup the SW is going to be pretty high

    I have the 12g weight in the fade spot and 10g in draw. With a playing length of 44” the SW is about D7. I bought a 5.5g weight off eBay that will replace the 12g weight to get the SW back to a D4-5 level. Hopefully will have the weight later this week

    Got a link to the eBay item?

    Ping G410+ 9° Tour 65X
    TM M6 15° AD DI 6x
    Ping G410 Hybrid 19° AD DI H 85x
    Ping iBlade 4-PW Modus3 105S
    RTX4 52/56/60° Tour Issue S400
    Scotty Cameron Fastback 2018
    Srixon Z-Star XV
  • Crooksc17Crooksc17 NJMembers Posts: 817 ✭✭

    @Hedgehog said:

    @Crooksc17 said:

    @Kale_m said:

    @Hedgehog said:
    I have the Tour 65X 45" and the Evenflow Black 6.0 Handcrafted tipped 0,5" and playing around 44,75". Evenflow Black still feels a bit whippy, but it likes to go straight when I mishit it off the toe, and a really good hit is maybe a bit longer than Tour shaft. But I have to say the Tour 65X is legit a good shaft, it likes to fade on me a bit more then the Evenflow.

    Where have you guys ordered weights? Would love a setup of 2 weights in neutral and draw, my factory weight is 14gr, friend has the same head and he had a 12gr weight.

    Golf works has the weights. But they are all pretty heavy. If you wanted a 2 weight setup the SW is going to be pretty high

    I have the 12g weight in the fade spot and 10g in draw. With a playing length of 44” the SW is about D7. I bought a 5.5g weight off eBay that will replace the 12g weight to get the SW back to a D4-5 level. Hopefully will have the weight later this week

    Got a link to the eBay item?

    https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/273904320880

    Bought stuff from this seller before so I trust them.

Sign In or Register to comment.