New Miura iron in September?

I just go toff the phone with a rep who said there is supposed to be a new iron releasing in Sept. I know its a bit early but I'm sure someone here has more info. I hope it's a continuation of the 1957 line.

> @kekoa said:

> I just go toff the phone with a rep who said there is supposed to be a new iron releasing in Sept. I know its a bit early but I'm sure someone here has more info. I hope it's a continuation of the 1957 line.

My understanding is that it is a blade and a replacement for the MB-001

I thought the recently released (in limited quantity of 100) "new Baby Blade" was being released main stream in September?

Is there an additional introduction expected that I'm not aware of?

Any for Lefties?

Guaranteed to be super ugly.

> @kro88 said:

> > @kekoa said:

> > I just go toff the phone with a rep who said there is supposed to be a new iron releasing in Sept. I know its a bit early but I'm sure someone here has more info. I hope it's a continuation of the 1957 line.

>

> My understanding is that it is a blade and a replacement for the MB-001

I find it hard to see what will replace the MB-001. The new baby blade has the Y grind so that is a clue that the grind is going to be there .

A smaller head MB-001, but then you are entering the new baby blade territory, I just find it hard to see how they can best the MB-001.

> @chonkoa said:

> > @kro88 said:

> > > @kekoa said:

> > > I just go toff the phone with a rep who said there is supposed to be a new iron releasing in Sept. I know its a bit early but I'm sure someone here has more info. I hope it's a continuation of the 1957 line.

> >

> > My understanding is that it is a blade and a replacement for the MB-001

>

> I find it hard to see what will replace the MB-001. The new baby blade has the Y grind so that is a clue that the grind is going to be there .

> A smaller head MB-001, but then you are entering the new baby blade territory, I just find it hard to see how they can best the MB-001.

its just something I heard from 2 separate ADs. No idea what to expect, would imagine its not a major change, but a more widely produced traditional blade is a "new" model. It seems the official replacement of the CB-57, BB, and MB-001 is happening

> @kro88 said:

> > @chonkoa said:

> > > @kro88 said:

> > > > @kekoa said:

> > > > I just go toff the phone with a rep who said there is supposed to be a new iron releasing in Sept. I know its a bit early but I'm sure someone here has more info. I hope it's a continuation of the 1957 line.

> > >

> > > My understanding is that it is a blade and a replacement for the MB-001

> >

> > I find it hard to see what will replace the MB-001. The new baby blade has the Y grind so that is a clue that the grind is going to be there .

> > A smaller head MB-001, but then you are entering the new baby blade territory, I just find it hard to see how they can best the MB-001.

>

> its just something I heard from 2 separate ADs. No idea what to expect, would imagine its not a major change, but a more widely produced traditional blade is a "new" model. It seems the official replacement of the CB-57, BB, and MB-001 is happening

What are you considering the replacement for the CB-57?

> @kro88 said:

> > @chonkoa said:

> > > @kro88 said:

> > > > @kekoa said:

> > > > I just go toff the phone with a rep who said there is supposed to be a new iron releasing in Sept. I know its a bit early but I'm sure someone here has more info. I hope it's a continuation of the 1957 line.

> > >

> > > My understanding is that it is a blade and a replacement for the MB-001

> >

> > I find it hard to see what will replace the MB-001. The new baby blade has the Y grind so that is a clue that the grind is going to be there .

> > A smaller head MB-001, but then you are entering the new baby blade territory, I just find it hard to see how they can best the MB-001.

>

> its just something I heard from 2 separate ADs. No idea what to expect, would imagine its not a major change, but a more widely produced traditional blade is a "new" model. It seems the official replacement of the CB-57, BB, and MB-001 is happening

Thanks for sharing the info. You have me now anticipating MB-001 replacement.

> @kro88 said:

> > @chonkoa said:

> > > @kro88 said:

> > > > @kekoa said:

> > > > I just go toff the phone with a rep who said there is supposed to be a new iron releasing in Sept. I know its a bit early but I'm sure someone here has more info. I hope it's a continuation of the 1957 line.

> > >

> > > My understanding is that it is a blade and a replacement for the MB-001

> >

> > I find it hard to see what will replace the MB-001. The new baby blade has the Y grind so that is a clue that the grind is going to be there .

> > A smaller head MB-001, but then you are entering the new baby blade territory, I just find it hard to see how they can best the MB-001.

>

> its just something I heard from 2 separate ADs. No idea what to expect, would imagine its not a major change, but a more widely produced traditional blade is a "new" model. It seems the official replacement of the CB-57, BB, and MB-001 is happening

I would love to see a replacement for the cb-57.

> @EaglesGolf99 said:

> > @kro88 said:

> > > @chonkoa said:

> > > > @kro88 said:

> > > > > @kekoa said:

> > > > > I just go toff the phone with a rep who said there is supposed to be a new iron releasing in Sept. I know its a bit early but I'm sure someone here has more info. I hope it's a continuation of the 1957 line.

> > > >

> > > > My understanding is that it is a blade and a replacement for the MB-001

> > >

> > > I find it hard to see what will replace the MB-001. The new baby blade has the Y grind so that is a clue that the grind is going to be there .

> > > A smaller head MB-001, but then you are entering the new baby blade territory, I just find it hard to see how they can best the MB-001.

> >

> > its just something I heard from 2 separate ADs. No idea what to expect, would imagine its not a major change, but a more widely produced traditional blade is a "new" model. It seems the official replacement of the CB-57, BB, and MB-001 is happening

>

> What are you considering the replacement for the CB-57?

I am thinking the 301

> @kro88 said:

> > @EaglesGolf99 said:

> > > @kro88 said:

> > > > @chonkoa said:

> > > > > @kro88 said:

> > > > > > @kekoa said:

> > > > > > I just go toff the phone with a rep who said there is supposed to be a new iron releasing in Sept. I know its a bit early but I'm sure someone here has more info. I hope it's a continuation of the 1957 line.

> > > > >

> > > > > My understanding is that it is a blade and a replacement for the MB-001

> > > >

> > > > I find it hard to see what will replace the MB-001. The new baby blade has the Y grind so that is a clue that the grind is going to be there .

> > > > A smaller head MB-001, but then you are entering the new baby blade territory, I just find it hard to see how they can best the MB-001.

> > >

> > > its just something I heard from 2 separate ADs. No idea what to expect, would imagine its not a major change, but a more widely produced traditional blade is a "new" model. It seems the official replacement of the CB-57, BB, and MB-001 is happening

> >

> > What are you considering the replacement for the CB-57?

>

> I am thinking the 301

Nothing alike. Own the CB-57. Like, hit and wouldn't mind a set of 301. But they are nothing alike.

> @EaglesGolf99 said:

> > @kro88 said:

> > > @EaglesGolf99 said:

> > > > @kro88 said:

> > > > > @chonkoa said:

> > > > > > @kro88 said:

> > > > > > > @kekoa said:

> > > > > > > I just go toff the phone with a rep who said there is supposed to be a new iron releasing in Sept. I know its a bit early but I'm sure someone here has more info. I hope it's a continuation of the 1957 line.

> > > > > >

> > > > > > My understanding is that it is a blade and a replacement for the MB-001

> > > > >

> > > > > I find it hard to see what will replace the MB-001. The new baby blade has the Y grind so that is a clue that the grind is going to be there .

> > > > > A smaller head MB-001, but then you are entering the new baby blade territory, I just find it hard to see how they can best the MB-001.

> > > >

> > > > its just something I heard from 2 separate ADs. No idea what to expect, would imagine its not a major change, but a more widely produced traditional blade is a "new" model. It seems the official replacement of the CB-57, BB, and MB-001 is happening

> > >

> > > What are you considering the replacement for the CB-57?

> >

> > I am thinking the 301

>

> Nothing alike. Own the CB-57. Like, hit and wouldn't mind a set of 301. But they are nothing alike.

didn't say alike. Just said replacement. Who's to say they'll come out with something just like the CB-57 again.

> @kro88 said:

> > @EaglesGolf99 said:

> > > @kro88 said:

> > > > @EaglesGolf99 said:

> > > > > @kro88 said:

> > > > > > @chonkoa said:

> > > > > > > @kro88 said:

> > > > > > > > @kekoa said:

> > > > > > > > I just go toff the phone with a rep who said there is supposed to be a new iron releasing in Sept. I know its a bit early but I'm sure someone here has more info. I hope it's a continuation of the 1957 line.

> > > > > > >

> > > > > > > My understanding is that it is a blade and a replacement for the MB-001

> > > > > >

> > > > > > I find it hard to see what will replace the MB-001. The new baby blade has the Y grind so that is a clue that the grind is going to be there .

> > > > > > A smaller head MB-001, but then you are entering the new baby blade territory, I just find it hard to see how they can best the MB-001.

> > > > >

> > > > > its just something I heard from 2 separate ADs. No idea what to expect, would imagine its not a major change, but a more widely produced traditional blade is a "new" model. It seems the official replacement of the CB-57, BB, and MB-001 is happening

> > > >

> > > > What are you considering the replacement for the CB-57?

> > >

> > > I am thinking the 301

> >

> > Nothing alike. Own the CB-57. Like, hit and wouldn't mind a set of 301. But they are nothing alike.

>

> didn't say alike. Just said replacement. Who's to say they'll come out with something just like the CB-57 again.

Ok. To clarify.

The 301 isn't a replacement for the CB-57.

The intended audience is not the same.

They signed Abraham Ancer to the company's first ever endorsement deal but he plays a discontinued model which which is kind of embarrassing for Miura. My guess is that they are working on something that he will play and it's going to become a new model.

> @If_I_Could_Only_Putt said:

> They signed Abraham Ancer to the company's first ever endorsement deal but he plays a discontinued model which which is kind of embarrassing for Miura. My guess is that they are working on something that he will play and it's going to become a new model.

He’s not signed to a typical endorsement deal. Miura does not pay him to play their clubs, instead he has exclusive rights to distribute their clubs in LatAm (I may be off slightly here with but that’s the gist of his deal).

> @Kevinnz said:

> Any for Lefties?

**All we've gotten in years are rebadged cavity backs.**

looks like John Wall posted new pics on his IG and Twitter of Miura protos

> @kro88 said:

> looks like John Wall posted new pics on his IG and Twitter of Miura protos

They are gorgeous

Nice looking but they look like 1008s with extra muscle tacked on.

Pics?

> @hurley999s said:

> Nice looking but they look like 1008s with extra muscle tacked on.

What is the difference between the 1008 and new 301's? I got to set up to a 301 and they don't look bad at all. Looking forward to seeing a pic of the new iron. I couldn't find it on IG.

Here you go...made a jumbled collage of the 4 pics

I'd give my left kidney to have a proto set. Can't tell which line those are a continuation of.

thanks for the pics.

Yuck. Looks like 1008 with different shape for the muscle and small cut in the middle.

"Miuraway" ... Anybody?

> @1t2golf said:

> > @Kevinnz said:

> > Any for Lefties?

>

>

>

> **All we've gotten in years are rebadged cavity backs.**

> @1t2golf said:

> > @Kevinnz said:

> > Any for Lefties?

>

>

>

> **All we've gotten in years are rebadged cavity backs.**

Try decades. It is really quite sad. Just picked up the new wedges though, they are noticeably different from the old ones. Had Callaway MD4s for a while but Miura always seems to pull me back.

I certainly feel for the plight of the leftie - BUT - MIURA HAS A LEFTY ONLY SPLIT CAVITY SET THAT IS WAAAAYYYYYYYYY BETTER THAN 301!!!!

I love the new protos, though I also love my 1008s - some of which are rusting nicely. Looks like the new protos will make a nice mixed set with the 501s should one want to go that route. They kinda remind me of the old Tourstage stuff which I was a fan of.

That said, with Mizuno teasing an MP-29 esq new set - I have a lot of saving to do...

I keep looking at these - I think it's safe to say I'm out $2500 already

The more I look at them, the more they look like what the Callaway Apex might look like if they'd done it right and actually forged them.