Best Driver of 2019 | Full Article _HERE_ | Discussion Thread _HERE_

New TaylorMade wedges - July 2019

12345679»

Comments

  • jll62jll62 MinneapolisClubWRX Posts: 2,197 ClubWRX

    @ASN21 said:

    @jll62 said:

    @Stevens24 said:
    So 150-200 more spin on a 10,500 spining wedge does not seem that significant. 1.5% is not worth dealing with what I feel is an ugly look. And if you hit the club 5 or 6 time in a round the rust is off the hitting area by then. JMHO

    What Rick tested, rust vs raw, isn't really all that interesting, but raw vs plated is the reason raw wedges matter. When you get water between the ball and the face, you lose more spin with a plated finish than you do with a raw face. The MG2 wedges are intended to give you the spin preservation benefits of a raw face without a fully rusty look.

    I personally like the look of full raw wedges, so these will take a bit of getting used to for me visually, but my MG raw 52 is already in the process of being replaced by an MG2 52.

    You know what would be an interesting test? The Glide 3.0 vs a rusted face MG2. TXG if you are reading this, make it happen!

    Yep. I'm waiting for someone to do that test!

    TaylorMade M5 9.0, Tensei Orange V2 70TX, 44.5"
    TaylorMade M5 Rocket 3, Tensei Blue X, 42.5"
    TaylorMade P-790 UDI 2, Aerotech SteelFiber i95 S
    TaylorMade RSi TP 3-PW, KBS C-Taper S+
    TaylorMade Milled Grind 52 Raw, DG S400 Tour Issue
    TaylorMade Hi-Toe 58, DG S400 Tour Issue
    TaylorMade Black Copper Soto, 34"
    TaylorMade TP5

    jll62's WITB
  • OspreyCIOspreyCI Valley of the SunMembers Posts: 4,980 ✭✭✭✭✭✭✭

    Why can’t we preorder the Bigfoot!!!! Come
    on TM!!

    PXG Gen2 0811x 10.5 GD AD IZ 6s
    TM M2 15* Speeder 757 Evo TS
    TM M2 #3 19* Fujikura
    PXG 0211 4 Iron Elevate Tour
    TM P790 5-AW Modus 105
    TM MG 54*
    TM MG2 60*
    PXG Gen2 Gunboat
  • mrmikeacmrmikeac Members Posts: 485 ✭✭✭✭

    FWIW
    Rick used the following formula:
    16 oz hydrogen peroxide
    2 oz white vinegar
    1/2 tbs of salt

    Driver: Ping G410 Plus, 10.5 Degrees set at 9.5, Weight Neutral, Tensei Orange 60 Gram Stiff
    3 Wood: Callaway Epic Flash Sub Zero, HZRDUS Smoke 70 Gram 6.0
    3 Hybrid: Ping G410 19 Degrees, Tensei Blue 80 Gram Stiff
    2 Iron: Taylormade P790 UDI, Project X HZDRUS Black 85g 6.0
    5-PW: Taylormade P760’s, Nippon Pro Modus Tour 120 Stiff
    50 Degree: Cleveland RTX 4, 10 Bounce, Mid Grind, Black Satin, Nippon Pro Modus 125 Wedge Flex
    54 Degree: Cleveland RTX 4, 10 Bounce, Mid Grind, Black Satin, Nippon Pro Modus 125 Wedge Flex
    58 Degree: TaylorMade Hi-Toe, KBS Hi-Rev 2.0
    Putter: 34” Scotty Cameron Phantom X #8 
    Ball: Taylormade TP5
  • Jdavenp3Jdavenp3 Members Posts: 850 ✭✭✭✭✭

    Well, told yall Id try to come through. Here is a picture of my rusted MG2. I did a full writeup in the equipment forum with more pictures and how I did it since I felt it was better suited to go there.

    https://forums.golfwrx.com/discussion/1789809/taylormade-mg2-in-hand-and-rusted-how-to-with-pictures/p1?new=1

    WITB:

    *Taylormade M4 8.75* Evenflow Black HC 6.0 65g
    *Taylormade M3 15* Tensei Blue
    *Ping i25 Hybrid 18*
    *Taylormade P790 4-AW Nippon Modus 105 T stiff
    *Taylormade MG2 Matte Nippon Modus 115 54/58*
    *Taylormade Spider X-navy w/ single sightline
    *2019 ProV1X-yellow
    *Nike camo cart bag.
    *Nike Vapor React 2 & Nike Air Max 1g
  • elwhippyelwhippy Members Posts: 3,251 ✭✭✭✭✭✭✭

    loving these new TM wedges. Looking like a replacement for my now a tad worn gunmetal tp 54.

  • OspreyCIOspreyCI Valley of the SunMembers Posts: 4,980 ✭✭✭✭✭✭✭

    Can’t decide between MG2 60
    And Bigfoot. Trying to find a store than has them in Phoenix.

    PXG Gen2 0811x 10.5 GD AD IZ 6s
    TM M2 15* Speeder 757 Evo TS
    TM M2 #3 19* Fujikura
    PXG 0211 4 Iron Elevate Tour
    TM P790 5-AW Modus 105
    TM MG 54*
    TM MG2 60*
    PXG Gen2 Gunboat
  • OspreyCIOspreyCI Valley of the SunMembers Posts: 4,980 ✭✭✭✭✭✭✭
    edited Sep 3, 2019 1:00am #248

    @OspreyCI said:
    Can’t decide between MG2 60
    And Bigfoot. Trying to find a store than has them in Phoenix.

    Blindly went ahead and ordered a MG2 60 SB wedge. Hope it works out. #rustit

    PXG Gen2 0811x 10.5 GD AD IZ 6s
    TM M2 15* Speeder 757 Evo TS
    TM M2 #3 19* Fujikura
    PXG 0211 4 Iron Elevate Tour
    TM P790 5-AW Modus 105
    TM MG 54*
    TM MG2 60*
    PXG Gen2 Gunboat
  • kush614kush614 Members Posts: 967 ✭✭✭✭✭

    Has anyone who ordered MG2s with custom options had their order ship yet? It’s been over a week now, and was really hoping they were shipping these out as fast as the P790s

  • jll62jll62 MinneapolisClubWRX Posts: 2,197 ClubWRX

    I'm loving the look of the MG2. Here are some side-by-sides of the grinds compared to the prior gen Milled Grind wedges. Nearly identical but with a few slight tweaks.

    Milled Grind 52 SB.09 vs MG2 52 SB.09
    The MG2 has a straighter trailing edge, whereas the MG had the heel and toe portions of the trailing edge scoop back a little. I assume this change was the result of trying to move mass around to where they wanted it on the back of the club. The MG2 sole looks quite a bit narrower in pictures, but I measured it with a digital calipers and the difference was less than 1mm.


    Milled Grind 60 LB.09 vs MG2 60 LB.08
    Identical C-grind from MG to MG2, just a degree less bounce on the MG2 LB.

    TaylorMade M5 9.0, Tensei Orange V2 70TX, 44.5"
    TaylorMade M5 Rocket 3, Tensei Blue X, 42.5"
    TaylorMade P-790 UDI 2, Aerotech SteelFiber i95 S
    TaylorMade RSi TP 3-PW, KBS C-Taper S+
    TaylorMade Milled Grind 52 Raw, DG S400 Tour Issue
    TaylorMade Hi-Toe 58, DG S400 Tour Issue
    TaylorMade Black Copper Soto, 34"
    TaylorMade TP5

    jll62's WITB
  • cmb71cmb71 ClubWRX Posts: 1,516 ✭✭✭✭✭✭

    @kush614 said:
    Has anyone who ordered MG2s with custom options had their order ship yet? It’s been over a week now, and was really hoping they were shipping these out as fast as the P790s

    Ordered all custom specs - new P790s, new P790 UDI and MG2s on 8/21 and all shipped together on 8/27. Here's hoping yours get there sooner than later. Hang in there, they're worth the wait (within reason).

    TaylorMade M5 Tour 9* - MC Tensei Pro Orange V2 60 TX
    TaylorMade M5 15* - Fuji Pro 2.0 Tour Spec 7
    TaylorMade GAPR LO 2 Iron - Nippon Modus Tour 105
    TaylorMade P7-TW 3-PW - Nippon Modus Tour 105
    TaylorMade Milled Grind Raw 54* & 60* - Nippon Modus 115 Wedge
    Scotty Cameron Phantom X 6 STR
  • cmb71cmb71 ClubWRX Posts: 1,516 ✭✭✭✭✭✭

    @jll62 said:
    I'm loving the look of the MG2. Here are some side-by-sides of the grinds compared to the prior gen Milled Grind wedges. Nearly identical but with a few slight tweaks.

    Milled Grind 52 SB.09 vs MG2 52 SB.09
    The MG2 has a straighter trailing edge, whereas the MG had the heel and toe portions of the trailing edge scoop back a little. I assume this change was the result of trying to move mass around to where they wanted it on the back of the club. The MG2 sole looks quite a bit narrower in pictures, but I measured it with a digital calipers and the difference was less than 1mm.


    Milled Grind 60 LB.09 vs MG2 60 LB.08
    Identical C-grind from MG to MG2, just a degree less bounce on the MG2 LB.

    Wishing I had ordered the black too... they look great in those pics.

    TaylorMade M5 Tour 9* - MC Tensei Pro Orange V2 60 TX
    TaylorMade M5 15* - Fuji Pro 2.0 Tour Spec 7
    TaylorMade GAPR LO 2 Iron - Nippon Modus Tour 105
    TaylorMade P7-TW 3-PW - Nippon Modus Tour 105
    TaylorMade Milled Grind Raw 54* & 60* - Nippon Modus 115 Wedge
    Scotty Cameron Phantom X 6 STR
  • jll62jll62 MinneapolisClubWRX Posts: 2,197 ClubWRX

    @cmb71 said:
    Wishing I had ordered the black too... they look great in those pics.

    The black looks amazing in person.

    TaylorMade M5 9.0, Tensei Orange V2 70TX, 44.5"
    TaylorMade M5 Rocket 3, Tensei Blue X, 42.5"
    TaylorMade P-790 UDI 2, Aerotech SteelFiber i95 S
    TaylorMade RSi TP 3-PW, KBS C-Taper S+
    TaylorMade Milled Grind 52 Raw, DG S400 Tour Issue
    TaylorMade Hi-Toe 58, DG S400 Tour Issue
    TaylorMade Black Copper Soto, 34"
    TaylorMade TP5

    jll62's WITB
  • cmb71cmb71 ClubWRX Posts: 1,516 ✭✭✭✭✭✭

    @jll62 said:

    @cmb71 said:
    Wishing I had ordered the black too... they look great in those pics.

    The black looks amazing in person.

    That does it... TM website, here I come. My MG Raw's are due for replacement soon enough, and I need a backup set anyway.

    TaylorMade M5 Tour 9* - MC Tensei Pro Orange V2 60 TX
    TaylorMade M5 15* - Fuji Pro 2.0 Tour Spec 7
    TaylorMade GAPR LO 2 Iron - Nippon Modus Tour 105
    TaylorMade P7-TW 3-PW - Nippon Modus Tour 105
    TaylorMade Milled Grind Raw 54* & 60* - Nippon Modus 115 Wedge
    Scotty Cameron Phantom X 6 STR
  • OspreyCIOspreyCI Valley of the SunMembers Posts: 4,980 ✭✭✭✭✭✭✭

    Ordered my MG2 60 (not custom) and it shipped three days after ordering.

    PXG Gen2 0811x 10.5 GD AD IZ 6s
    TM M2 15* Speeder 757 Evo TS
    TM M2 #3 19* Fujikura
    PXG 0211 4 Iron Elevate Tour
    TM P790 5-AW Modus 105
    TM MG 54*
    TM MG2 60*
    PXG Gen2 Gunboat
  • falken19150falken19150 Members Posts: 1,765 ✭✭✭✭✭✭

    Why cant TM just do a normal Raw Milled Grind. So frustrating.

  • Luando85Luando85 AshevilleMembers Posts: 83 ✭✭✭

    These look beautiful! Literally the nicest wedge I’ve ever seen 👀

  • OspreyCIOspreyCI Valley of the SunMembers Posts: 4,980 ✭✭✭✭✭✭✭

    Anyone playing them? Reviews?

    Mine will be here tomorrow.

    PXG Gen2 0811x 10.5 GD AD IZ 6s
    TM M2 15* Speeder 757 Evo TS
    TM M2 #3 19* Fujikura
    PXG 0211 4 Iron Elevate Tour
    TM P790 5-AW Modus 105
    TM MG 54*
    TM MG2 60*
    PXG Gen2 Gunboat
  • mrmikeacmrmikeac Members Posts: 485 ✭✭✭✭

    Just picked up 2 MG2’s in black, 50 and 54 in standard bounce, hanging onto my Hi-Toe 58 ATV. Hit them both on GCQuad and immediately fell in love. Also just sold my Glide 3.0’s, they were good but after a couple of rounds I started to struggle on full shots with them. Will report back with more feedback after tomorrow’s outing and will also work on rusting them out. So far I’m in love, never said that about a wedge before. Fwiw I had SM7’s before the Glide 3.0’s, these MG2’s blow both out of the water in terms of looks and feel.

    Side note: my wife is sleeping on the couch tonight, the MG2’s need a good night’s rest, they have a long day ahead of them tomorrow.

    Driver: Ping G410 Plus, 10.5 Degrees set at 9.5, Weight Neutral, Tensei Orange 60 Gram Stiff
    3 Wood: Callaway Epic Flash Sub Zero, HZRDUS Smoke 70 Gram 6.0
    3 Hybrid: Ping G410 19 Degrees, Tensei Blue 80 Gram Stiff
    2 Iron: Taylormade P790 UDI, Project X HZDRUS Black 85g 6.0
    5-PW: Taylormade P760’s, Nippon Pro Modus Tour 120 Stiff
    50 Degree: Cleveland RTX 4, 10 Bounce, Mid Grind, Black Satin, Nippon Pro Modus 125 Wedge Flex
    54 Degree: Cleveland RTX 4, 10 Bounce, Mid Grind, Black Satin, Nippon Pro Modus 125 Wedge Flex
    58 Degree: TaylorMade Hi-Toe, KBS Hi-Rev 2.0
    Putter: 34” Scotty Cameron Phantom X #8 
    Ball: Taylormade TP5
  • jll62jll62 MinneapolisClubWRX Posts: 2,197 ClubWRX

    @OspreyCI said:
    Anyone playing them? Reviews?

    Mine will be here tomorrow.

    I had the MG2 52 in the bag tonight in place of the MG Raw 52. Very similar performance, but a subtle change to sound/feel. More solid, less "click" at impact. I like it.

    TaylorMade M5 9.0, Tensei Orange V2 70TX, 44.5"
    TaylorMade M5 Rocket 3, Tensei Blue X, 42.5"
    TaylorMade P-790 UDI 2, Aerotech SteelFiber i95 S
    TaylorMade RSi TP 3-PW, KBS C-Taper S+
    TaylorMade Milled Grind 52 Raw, DG S400 Tour Issue
    TaylorMade Hi-Toe 58, DG S400 Tour Issue
    TaylorMade Black Copper Soto, 34"
    TaylorMade TP5

    jll62's WITB
  • OspreyCIOspreyCI Valley of the SunMembers Posts: 4,980 ✭✭✭✭✭✭✭
    edited Sep 9, 2019 3:12am #261

    Good reviews. Be using my 60 next Sunday. The 54 getting replaced if I really like the 60. Sold my HT 60 for the MG2 60. Couldn’t get along with the HT. I like a more traditional wedge.

    PXG Gen2 0811x 10.5 GD AD IZ 6s
    TM M2 15* Speeder 757 Evo TS
    TM M2 #3 19* Fujikura
    PXG 0211 4 Iron Elevate Tour
    TM P790 5-AW Modus 105
    TM MG 54*
    TM MG2 60*
    PXG Gen2 Gunboat
  • pedrobordespedrobordes Monterrey, NLMembers Posts: 17 ✭✭

    reviews?

    TM M6 10.5º / Tensei CK Pro Orange 60TX
    TM M1 2017 16º / HZRDUS Black 75X
    TM M2 Tour 18º / Diamana D+ 80TX
    TM P790 UDI 2i / KBS Tour Hybrid Prototype 95X
    Mizuno MP-4 3-PW / TT Dynamic Gold Tour Issue X100 SS
    Miura Forged Raw 50 Custom F Grind / TT Dynamic Gold Tour Issue S400
    Miura Forged Raw 54 Custom S Grind / TT Dynamic Gold Tour Issue S400
    Miura Forged Raw 59 Custom C Grind / TT Dynamic Gold Tour Issue S400
    Scotty Cameron Circle T Newport 2 Carbon Steel TriSole
  • mrmikeacmrmikeac Members Posts: 485 ✭✭✭✭

    First round in the books, really enjoying the feel of these wedges, very soft off the face.
    Just a few tweaks need to be done to these to really get them dialed in: Need to get them bent 1 degree flat and put a 30 second wrap on the grip and I’ll be 100% good to go.

    Pros:
    Turf interaction is so smooth, just seems to glide through the turf, not sure if the milling on the bottom has something to do with that but it sure does seem to give me ease of mind, didn’t run into any trouble and I had some sketchy lies, these made it easy to get out of everything I put myself in today.
    Spin was great, checked up really nice on short shots around the green and full shots seemed to have a lot of bite on them, I will say they didn’t spin as much as the Glide 3.0’s but honestly, that did more harm then good on the course for me, didn’t like attacking a pin just to see the ball spin back 3 more feet to make for a longer putt.
    Feel was outstanding, especially on shots around the green, probably one of the best feeling wedges I’ve ever hit, such a soft and sweet feel to them, no click to them, at all. The raw face really helps with that, buttery smooth.
    Overall weight profile felt so good in my hands, really reminded me of my SM7’s, just perfect, the stock S200 shaft is a great addition.
    Consistency was what shined the most out of these, shot after shot I just knew my distances and hit them every time.
    Black finish has held up nicely, no wear at all so far.
    Head profile fits my eye so perfectly, I love the thin profile of this wedge, not bulky or clunky at all, you can really get under the ball without any worry of chunking it, feels like I can shape this wedge with no issues.
    My confidence level was through the roof with these today, I can’t wait to get back out there with them.

    Cons:
    Not sure how I feel about the laser etching on the face, I can already tell it won’t last long, some of the etching has already been rubbed off after a few strikes. No big deal though, seriously, don’t let that be a reason to not try these, please.
    I kind of wish Taylormade put some milling on the toe area, seems too blank to me, granted I don’t think anyone should be hitting it that far out the toe but it would have been a nice touch like how Cleveland mills the RTX4.

    Other than a few aesthetic touches, I really can’t fault this wedge whatsoever. Taylormade, job well done again, these are really going to be a contender this year for vokey, we will definitely see these in more tour players bags next season and they will for sure be staying in mine.

    Driver: Ping G410 Plus, 10.5 Degrees set at 9.5, Weight Neutral, Tensei Orange 60 Gram Stiff
    3 Wood: Callaway Epic Flash Sub Zero, HZRDUS Smoke 70 Gram 6.0
    3 Hybrid: Ping G410 19 Degrees, Tensei Blue 80 Gram Stiff
    2 Iron: Taylormade P790 UDI, Project X HZDRUS Black 85g 6.0
    5-PW: Taylormade P760’s, Nippon Pro Modus Tour 120 Stiff
    50 Degree: Cleveland RTX 4, 10 Bounce, Mid Grind, Black Satin, Nippon Pro Modus 125 Wedge Flex
    54 Degree: Cleveland RTX 4, 10 Bounce, Mid Grind, Black Satin, Nippon Pro Modus 125 Wedge Flex
    58 Degree: TaylorMade Hi-Toe, KBS Hi-Rev 2.0
    Putter: 34” Scotty Cameron Phantom X #8 
    Ball: Taylormade TP5
  • Bobbo03Bobbo03 Members Posts: 29 ✭✭

    @mrmikeac said:

    Pros:
    Turf interaction is so smooth, just seems to glide through the turf, not sure if the milling on the bottom has something to do with that but it sure does seem to give me ease of mind, didn’t run into any trouble and I had some sketchy lies, these made it easy to get out of everything I put myself in today.
    Overall weight profile felt so good in my hands, really reminded me of my SM7’s, just perfect, the stock S200 shaft is a great addition.
    Consistency was what shined the most out of these, shot after shot I just knew my distances and hit them every time.

    Cons:
    Not sure how I feel about the laser etching on the face, I can already tell it won’t last long, some of the etching has already been rubbed off after a few strikes. No big deal though, seriously, don’t let that be a reason to not try these, please.

    Demoed the MG2 last week and can very much agree with your findings. The turf interaction was great, consistent and for me better than the SM7s.
    Ye that laser etching seem to be more of a cosmetic thing, after a couple of bunker shots it seemed to be gone.

    I still haven't pulled the trigger, mostly because of grind/bounce decision. I play a 52, 56 set up and like to be able to manipulate the 56 a lot for various different shots. The 56 LB had the desired grind and overall excellent but was lacking a bit against the SB when it came fluffy bunker lies. Also considering the T20s since they come with a 56, 10 C grind option. Shame the 56, 12 TW grind isn't available for the average Joe.

    Taylormade M1 '17 9,5° UST Elements Platinum Prototype PT6F5
    Callaway X-Hot Pro 15° Diamana Kai'li 70
    Ping G410 Crossover 20° Tensei Blue 80 TX
    Wilson Staff FG Tour V6 Irons 4-PW True Temper X100 AMT
    Mizuno T5 52° & 56° True Temper Gold S300
    Nike Method Core 01W

  • br61br61 3x Hackin' Hall of Shame SW MissouriMembers Posts: 2,666 ✭✭✭✭✭✭✭
    edited Sep 11, 2019 11:24am #265

    @kush614 said:
    Has anyone who ordered MG2s with custom options had their order ship yet? It’s been over a week now, and was really hoping they were shipping these out as fast as the P790s

    I ordered my MG2 Black 52 & 58* with black Modus 115 wedge shafts at +1/4" and Winn Midsize grip from my club pro on 8/29 and they arrived last Friday (9/6). I was surprised to see the box before my round last Friday. Like any ho, I put them in the play immediately and left my old wedges in the car. Ha.

    I did notice they were flying little further than my old ones but seemed to be easier for me to chip with them. I'm letting the faces rust naturally and will report how long it took.

    My bag of hacking utensils;

    Titleist TS3 9.5 PX Even Flow White 6.0(45")
    Callaway Epic Flash 9.0 PX Smoke 6.0
    TM Aeroburner TP fw 15*, hybrids 19* & 22*
    MP-18 MMC 4-PW Modus 120 stiff
    TM MG2 Black 52.09 & 58.11 w/Black Modus 115 Wedge
    ancient Odyssey 2Ball Long putter at 44"






  • JoeJoeJoeUrBoatJoeJoeJoeUrBoat Leamington OntarioMembers Posts: 825 ✭✭✭✭✭

    Odd question, does the extreme rusting leave residue on the ball? I'm wondering because I play in my simulator all winter and don't want the rust going on the screen, it was expensive lol.

    915 D2 10.5 Tour Ad Di 6s
    910 15 Diamana Whiteboard 
    P790 UDI
    2019 P790 4-PW Dg 105 S300
    SM7 48, 54, 60
    Rory McIlroy Scotty Cameron
  • jll62jll62 MinneapolisClubWRX Posts: 2,197 ClubWRX

    @JoeJoeJoeUrBoat said:
    Odd question, does the extreme rusting leave residue on the ball? I'm wondering because I play in my simulator all winter and don't want the rust going on the screen, it was expensive lol.

    I’ve played raw wedges for years and have never had rust end up on a ball. The main area of impact usually stays fairly free of rust anyway.

    TaylorMade M5 9.0, Tensei Orange V2 70TX, 44.5"
    TaylorMade M5 Rocket 3, Tensei Blue X, 42.5"
    TaylorMade P-790 UDI 2, Aerotech SteelFiber i95 S
    TaylorMade RSi TP 3-PW, KBS C-Taper S+
    TaylorMade Milled Grind 52 Raw, DG S400 Tour Issue
    TaylorMade Hi-Toe 58, DG S400 Tour Issue
    TaylorMade Black Copper Soto, 34"
    TaylorMade TP5

    jll62's WITB
  • derekthomas14derekthomas14 Members Posts: 23 ✭✭

    I just got mine and absolutely love them. They look good behind the ball. I can't wait for the faces to rust up and really see what they are made of.

  • Dpak05Dpak05 Dpak Members Posts: 466 ✭✭✭✭

    Just ordered a set today. We'll see how they work out.

    [font=arial,helvetica,sans-serif]Driver: Titleist 915 D2[/font]
    [font=arial,helvetica,sans-serif]Wood:Titleist 915F[/font]
    [font=comic sans ms,cursive][font=arial,helvetica,sans-serif]Hybrids: Titleist 816H1
    Irons: Srixon z545 4-PW
    Wedges: Callaway MD3 52/56/60
    Putter: Bettinardi SS#2
    Grips: Lamkin Z5
    Ball: Anything I can find[/font]
    [/font]
  • cj4501cj4501 Members Posts: 719 ✭✭✭✭✭

    Ordering the big foot today. Should replace my 58 pm grind rather quickly I imagine

Leave a Comment

BoldItalicStrikethroughOrdered listUnordered list
Emoji
Image
Align leftAlign centerAlign rightToggle HTML viewToggle full pageToggle lights
Drop image/file