Next Gen TM UDI?

Just tried to place a custom order on the P790 UDI but was told that TM is not filling any more of these. Are they coming out with anything new in the near future?

New P790 coming this fall....

Didn't they ditch the Udi for the gapr

> @scottb15 said:

> Didn't they ditch the Udi for the gapr

Ugh hope not, totally not the same club.

> @scottb15 said:

> Didn't they ditch the Udi for the gapr

They need to ditch the GAPR for a new P790 udi.

Funny. I found the gapr low to be much better all around than the UDI. Feel , flight and forgiveness. Could have ave just been the combo ( Addi 105). Never hit that shaft in udi.

> @hwwong said:

> Just tried to place a custom order on the P790 UDI but was told that TM is not filling any more of these. Are they coming out with anything new in the near future?

I tried ordering one through my pro 4 weeks ago and have just recently been told that they won't be in stock until November 2020. I'll probably go for the X-Forged Ut instead.

> @jonnymc44 said:

> > @hwwong said:

> > Just tried to place a custom order on the P790 UDI but was told that TM is not filling any more of these. Are they coming out with anything new in the near future?

>

> I tried ordering one through my pro 4 weeks ago and have just recently been told that they won't be in stock until November 2020. I'll probably go for the X-Forged Ut instead.

Damn NOV 2020?? Yea I was also looking at the X Forged Utility. That or the Z U85?

> @hwwong said:

> > @jonnymc44 said:

> > > @hwwong said:

> > > Just tried to place a custom order on the P790 UDI but was told that TM is not filling any more of these. Are they coming out with anything new in the near future?

> >

> > I tried ordering one through my pro 4 weeks ago and have just recently been told that they won't be in stock until November 2020. I'll probably go for the X-Forged Ut instead.

>

> **** NOV 2020?? Yea I was also looking at the X Forged Utility. That or the Z U85?

>

I've got the Callaway Apex Pro irons from 2014 so I know I'll probably like the look of the X Forged. I've read some good things about Mizuno MP-18 fli-hi and Titleist 718 T-MB as well.

> @jonnymc44 said:

> > @hwwong said:

> > Just tried to place a custom order on the P790 UDI but was told that TM is not filling any more of these. Are they coming out with anything new in the near future?

>

> I tried ordering one through my pro 4 weeks ago and have just recently been told that they won't be in stock until November 2020. I'll probably go for the X-Forged Ut instead.

System glitch I’m sure. I bet they release one that matches the new P790s.

if the Gapr is what they are going with, I am out, that thing is uglier than crap

> @maddsurf said:

> if the Gapr is what they are going with, I am out, that thing is uglier than crap

TM should have used the look of the P790 UDI as a benchmark for the GAPR. Epic fail looks wise for sure..

Agreed 100%, the UDI 790 is the best looking driving iron on the market hands down. The Gapr looks like a hybrid and a driving iron made love and a hideous baby came out...which of course only a mother (gapr) could love

> @jonnymc44 said:

> > @hwwong said:

> > > @jonnymc44 said:

> > > > @hwwong said:

> > > > Just tried to place a custom order on the P790 UDI but was told that TM is not filling any more of these. Are they coming out with anything new in the near future?

> > >

> > > I tried ordering one through my pro 4 weeks ago and have just recently been told that they won't be in stock until November 2020. I'll probably go for the X-Forged Ut instead.

> >

> > **** NOV 2020?? Yea I was also looking at the X Forged Utility. That or the Z U85?

> >

>

> I've got the Callaway Apex Pro irons from 2014 so I know I'll probably like the look of the X Forged. I've read some good things about Mizuno MP-18 fli-hi and Titleist 718 T-MB as well.

And as if by magic, Mark Crossfield posts a review comparing the 718 T-MB and the MP-18 Hi Fli

Big fan of the MP18 FliHi. Plenty long, good flight and very playable. Looking forward to seeing if they get even more out of the MP20 version.

Ordered the X Forged on Saturday, Callaway shipped and delivered yesterday. Can't beat that for service. Our pro is likely to drop TM due to their limited stock here in the UK.

A customer ordered a new set of irons 4 weeks ago- estimated delivery date end of August. By which point the season over here is pretty much done. September weather can be mixed; sometimes very good, sometimes awful. He's not overly happy with the service.

Damn that is quick.

I was able to snag an TP UDI 2 iron on the BST, so that'll definitely do for now. I liked the feel better on those anyways!

> @hwwong said:

> > @jonnymc44 said:

> > > @hwwong said:

> > > Just tried to place a custom order on the P790 UDI but was told that TM is not filling any more of these. Are they coming out with anything new in the near future?

> >

> > I tried ordering one through my pro 4 weeks ago and have just recently been told that they won't be in stock until November 2020. I'll probably go for the X-Forged Ut instead.

>

> **** NOV 2020?? Yea I was also looking at the X Forged Utility. That or the Z U85?

>

U85 is pure gold for me. Love it.

> @j-rob said:

> > @hwwong said:

> > > @jonnymc44 said:

> > > > @hwwong said:

> > > > Just tried to place a custom order on the P790 UDI but was told that TM is not filling any more of these. Are they coming out with anything new in the near future?

> > >

> > > I tried ordering one through my pro 4 weeks ago and have just recently been told that they won't be in stock until November 2020. I'll probably go for the X-Forged Ut instead.

> >

> > **** NOV 2020?? Yea I was also looking at the X Forged Utility. That or the Z U85?

> >

>

> U85 is pure gold for me. Love it.

What shaft you have in it?

> @mBiden2 said:

> > @j-rob said:

> > > @hwwong said:

> > > > @jonnymc44 said:

> > > > > @hwwong said:

> > > > > Just tried to place a custom order on the P790 UDI but was told that TM is not filling any more of these. Are they coming out with anything new in the near future?

> > > >

> > > > I tried ordering one through my pro 4 weeks ago and have just recently been told that they won't be in stock until November 2020. I'll probably go for the X-Forged Ut instead.

> > >

> > > **** NOV 2020?? Yea I was also looking at the X Forged Utility. That or the Z U85?

> > >

> >

> > U85 is pure gold for me. Love it.

>

> What shaft you have in it?

UST RECOIL 95

> @j-rob said:

> > @mBiden2 said:

> > > @j-rob said:

> > > > @hwwong said:

> > > > > @jonnymc44 said:

> > > > > > @hwwong said:

> > > > > > Just tried to place a custom order on the P790 UDI but was told that TM is not filling any more of these. Are they coming out with anything new in the near future?

> > > > >

> > > > > I tried ordering one through my pro 4 weeks ago and have just recently been told that they won't be in stock until November 2020. I'll probably go for the X-Forged Ut instead.

> > > >

> > > > **** NOV 2020?? Yea I was also looking at the X Forged Utility. That or the Z U85?

> > > >

> > >

> > > U85 is pure gold for me. Love it.

> >

> > What shaft you have in it?

>

> UST RECOIL 95

That’s the stock shaft correct? How do you like it?

> @mBiden2 said:

> > @j-rob said:

> > > @mBiden2 said:

> > > > @j-rob said:

> > > > > @hwwong said:

> > > > > > @jonnymc44 said:

> > > > > > > @hwwong said:

> > > > > > > Just tried to place a custom order on the P790 UDI but was told that TM is not filling any more of these. Are they coming out with anything new in the near future?

> > > > > >

> > > > > > I tried ordering one through my pro 4 weeks ago and have just recently been told that they won't be in stock until November 2020. I'll probably go for the X-Forged Ut instead.

> > > > >

> > > > > **** NOV 2020?? Yea I was also looking at the X Forged Utility. That or the Z U85?

> > > > >

> > > >

> > > > U85 is pure gold for me. Love it.

> > >

> > > What shaft you have in it?

> >

> > UST RECOIL 95

>

> That’s the stock shaft correct? How do you like it?

Yep. I like it. I use it about 4 times a round off of the tee and into a Par 5 about once a round.

> @j-rob said:

> > @mBiden2 said:

> > > @j-rob said:

> > > > @mBiden2 said:

> > > > > @j-rob said:

> > > > > > @hwwong said:

> > > > > > > @jonnymc44 said:

> > > > > > > > @hwwong said:

> > > > > > > > Just tried to place a custom order on the P790 UDI but was told that TM is not filling any more of these. Are they coming out with anything new in the near future?

> > > > > > >

> > > > > > > I tried ordering one through my pro 4 weeks ago and have just recently been told that they won't be in stock until November 2020. I'll probably go for the X-Forged Ut instead.

> > > > > >

> > > > > > **** NOV 2020?? Yea I was also looking at the X Forged Utility. That or the Z U85?

> > > > > >

> > > > >

> > > > > U85 is pure gold for me. Love it.

> > > >

> > > > What shaft you have in it?

> > >

> > > UST RECOIL 95

> >

> > That’s the stock shaft correct? How do you like it?

>

> Yep. I like it. I use it about 4 times a round off of the tee and into a Par 5 about once a round.

Nice. I’ve thought about getting the 3 and using it off the tee

Just posted in New P790 thread

Wow, another great photoshop! ;)

i just ordered the first gen last week... feelsbadman