Best Driver of 2019 | Full Article _HERE_ | Discussion Thread _HERE_

Iron shaft in a putter?

OknowsOknows Members Posts: 1,157 ✭✭✭✭✭✭

Can I/should I do this? If so, is there a particular raw length and or weight I should be looking for? Needing a .355 black shaft for a Scotty refinish.

Ping G410 Plus 9* w/ Diamana W 70x
Callaway Rogue 15* w/ PX Evnflow Blue 75x
Ping G 17.5 w/ Tour 80
Callaway CF16 4-AW w/ DG TI x100
Ping Glide 2.0 54* w/ DG s400
Ping Glide 2.0 58* w/ DG s400
Evnroll ER1

Comments

  • Puttersaurus RexPuttersaurus Rex one swing at a time Members Posts: 601 ✭✭✭✭✭

    This has been done. KBS Tour X Flex wedge shaft is popular in some builds. Finding a black shaft will limit some options.

    I don't always play minimal, but when I do:
    Driver, 5 wood, 4 hybrid, 6, 8, PW, 54, putter
  • MadGolfer76MadGolfer76 Admiration is the state furthest from understanding. Members Posts: 20,140 ✭✭✭✭✭✭✭

    8i shaft

    Titleist 915d3 9.5
    Titleist 917f3 15
    Mizuno Clk 18, 21
    Titleist 716mb 4-Pw
    Vokey Sm7 52, 58
    Bettinardi Studio Stock #8
    Titleist ProV1
  • RogerinNewZealandRogerinNewZealand Maungakeikei Auckland New ZealandMembers Posts: 2,562 ✭✭✭✭✭✭✭

    I used 8 or 7 i shaft for a build a year ago no issues dgs200....

    2019 September nice bag

    Titleist 909d2 9.5
    Tm M1 21 hybrid'16
     
    Mizuno MP 63 DGR300 at D4

    Old SM at 54 and SM6 58S 10
    Ping B60 
    DarkTanTitleistCap

  • ckayckay Members Posts: 4,125 ✭✭✭✭✭✭✭

    Putter lounge.

    Taylormade M4 440 10* Tensei White Pro 60TX
    Taylormade M2 Tour 16.5* Atmos Blue 7x
    Taylormade M2 L.I.F.T. 2 KBS Hybrid Proto 85x
    Miura CB57 Nippon SPB X
    Vokey CF 52F/56M/60M S400 Onyx
    Cameron Cami & Co Newport Beach 34/350

    WITB Link
  • Howard JonesHoward Jones Members Posts: 9,371 ✭✭✭✭✭✭✭

    Start by weight, and do the numbers as Grams pr inch when you compare iron shafts to Putter shafts.
    Using a shaft like DG X100 is not uncommon, and you find it as Black onyx.
    Putter shafts is in general stiffer than most other shafts, so its no reasons to "soft step" unless you want a softer shaft, so using the #9 iron shaft is the norm.

    Weight examples -
    Standard TT putter shaft is 120 grams as stepless at 37" or 3.24 grams pr inch
    Since its 37 as start, its very easy to compare to a #9 iron constant wgt shaft, so if you go DG X100, you add 10 grams

  • Z1ggy16Z1ggy16 Members Posts: 7,841 ✭✭✭✭✭✭✭

    I've done it, using a project x 7.0. Problem was it felt weird after because I have been so used to the 115-120g variants in most putters. The px shaft was like 135g and I just couldn't square the face up after.

    WITB
    OG Epic Sub Zero 9* | HZRDUS Smoke 60X
    '16 M1 Tour Issue 16* | Diamana B 70X
    '17 M1 Tour Issue 3h or GAPR Lo | Accra TZ6 M5
    P790 4i | Modus 120X
    P770 5-PW | Modus 120X
    Glide Stealth 2.0 50/10SS | Modus 120TX "Spinner" 
    Glide Stealth 2.0 54/12SS | Modus 120TX "Spinner" 
    Hi-Toe 58 | Modus 125 Wedge ( Glide Stealth 2.0 58/10SS for spring & fall)
    Bettinardi MC 360 Tour or Ardmore 2 
    ProV1x
    Sun Mountain 5.5 Bag
    Nike Tour Premiere






  • TommyjTommyj Members Posts: 468 ✭✭✭✭

    I've done this in the past with a DG X100 37" (wedge length) shaft when I've needed a .355 tip. Works fine but the step pattern isn't a great look if you have an expensive putter head.

  • geochitowngeochitown Members Posts: 1,891 ✭✭✭✭✭✭

    Greg Norman experimented with this
    I heard he used a 3 iron shaft

    Lead Tape lovingly applied - Driver through GW
    TEE XCG7 Beta +1* to 11.5* - Testing at 43" w/ Matrix 7M3 stiff/Driver stand-in TEE EX9 Long 13* - Accra Tour Z ST 75 M4 untipped at 42.5" 
    OR TEE XCG7 Beta 4W 16.5* - Matrix 8M2 /5W 18* - Matrix 8M2 stiff tipped 2" at 41.75"
    TEE XCG7 Beta 19* H - Fujikura Fit-on Red Stiff - 85 g at 39.25"
    TEE XCG7 Beta 22*H - Diamana Thump T93 Stiff untipped at 38.75"
    TEE XCG7 Beta 25*H - Diamana Thump i465ct 4i shaft stiff 38.25"
    Maxfli Revolution Black 5-PW (27,31,35,39,43,48) at -1/2" length DGS300U
    Vokey SM4 52-08F
    Cleveland TA588 57-10 (bent to 56*, so 9* bounce)
    Vokey SM5 60-07S  
    SC Futura X5r 33' flownecked by Bastain-cerakote sniper gray-silver dots-white flange sight line-SS Flatso 2.0

Leave a Comment

BoldItalicStrikethroughOrdered listUnordered list
Emoji
Image
Align leftAlign centerAlign rightToggle HTML viewToggle full pageToggle lights
Drop image/file