** OFFICIAL REVIEW: MITSUBISHI MMT Iron Shafts ***** FINAL REVIEW Post #2 is UP

 J13 ·  
J13J13 Dad golfMaryland 16118WRX Points: 1,132Handicap: +1.6Members Posts: 16,118 Titanium Tees
Joined:  edited Oct 12, 2019 in Tour and Pre-Release Equipment #1

BEING REVIEWED:
Mitsubishi MMT shafts (125TX)

First, I want to thank Mitsubishi and GolfWRX for putting this opportunity together. I had a discussion with WRX about the new MMT shafts and how I’m really looking hard at switching to graphite due to bouts with tennis and golfers elbow. The wear-and-tear from years of sports catches up with all of us and I'm at the point where I’m ready to make the switch IF it makes sense from a performance standpoint. I play a lot of competitive amateur golf (at least I did before the elbow issues) so I will only switch if I feel it's the same if not better than what i'm currently using. That goes for my entire bag. If I find these aren't what I'm looking for I will most likely go the insert route. As I said I sincerely appreciate Mitsubishi providing shafts for the test but I won't sacrifice my scoring ability just to write a positive review.

A little about myself

HCP : I range from +1.9 to 0 this year
Driver SS : 115’ish on course.
6 iron SS: 93-94mph
Swing Type : Think Tony Finau or John Rahm in terms of swing length and aggressive transition.

REVIEW Questions that I want to answer:
1. Can the Mitsubishi MMT’s truly replace heavier steel shafts, particularly my Modus 120TX's
2. Will these shafts take the stress off my joints, particularly my elbows and wrists.

With that said these arrived late last week and I'm just getting around to building some of the irons up. I will be adding info and more pics as I practice and get rounds in. For this review I have 2 identical sets of irons. This will be APPLES TO APPLES. I will be focusing on a long iron (#4), a mid iron (#7), and a short iron (#9). I will also be adding wedges later in the test.

EQUIPMENT BEING REVIEWED

Mitsubishi MMT 125TX in Srixon 745 irons (SW D4)
Vs
Modus 120TX in Srixon 745 irons (SW D4)

Has Mitsubishi figured out the secret sauce? Let’s find out.






Posted:
Post edited by J13 on
Driver - Under construction
Fairway wood - Under construction
Irons - Under Construction
Wedges - Under Construction
Odyssey Versa 6
Srixon Zstar XV

WITB- http://www.golfwrx.c.../page__st__1590


Instagram-
On -, @Jminis13





«13456717
17

Comments

  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • J13J13 Dad golf Maryland 16118WRX Points: 1,132Handicap: +1.6Members Posts: 16,118 Titanium Tees
    Joined:  edited Oct 11, 2019 #3

    NEW PICS 10/7/























    Posted:
    Post edited by J13 on
    Driver - Under construction
    Fairway wood - Under construction
    Irons - Under Construction
    Wedges - Under Construction
    Odyssey Versa 6
    Srixon Zstar XV

    WITB- http://www.golfwrx.c.../page__st__1590


    Instagram-
    On -, @Jminis13





  • mBiden2mBiden2 #15 and counting..... Atlanta, GA 1043WRX Points: 267Handicap: 10.2Members Posts: 1,043 Platinum Tees
    Joined:  #4

    I can’t wait to read your review!

    Posted:
    WITB

    Driver - ***under construction***
    3W - ***under construction***
    Irons - ***under construction***
    Wedges - ***under construction***
    Scotty Cameron Studio Select Newport 2 Mid-Slant
  • blev2blev2 Blev  491WRX Points: 76Members Posts: 491 Greens
    Joined:  #5

    Been playing recoil prototypes for the last three years due to elbow pain. Made a world of difference. Interested to hear about these

    Posted:
  • Smitty120Smitty120 MD 550WRX Points: 141Handicap: 1.0Members Posts: 550 Golden Tee
    Joined:  #6

    I will keep my thoughts to myself until J13 wants me to chime in. :)

    Posted:
    • SIM Max 10.5 - Ventus Blue Velocore 6X 
    • SIM Max 19* -  Hzrdus 
    • P790 3 - ADDI 95X
    • P750 4-PW - TI X100
    • MG2  52 & 58 - TI S400
    • Stroke Lab 10s
    • 19' TP5
  • J13J13 Dad golf Maryland 16118WRX Points: 1,132Handicap: +1.6Members Posts: 16,118 Titanium Tees
    Joined:  #7

    On -, @blev2 said:

    Been playing recoil prototypes for the last three years due to elbow pain. Made a world of difference. Interested to hear about these

    A friend of mine has been playing Recoils off and on since they came out. He speaks very highly of them, especially how the graphite took the vibration out of the misses. I'm really really looking forward to that aspect of the MMT's. I also know a few players who use SteelFibers so I have a decent amount of experience with those as well. Overall I've found that liked some of the current offerings but never enough to actually consider making the switch. Interesting to see if the MMT's do the trick.

    Posted:
    Driver - Under construction
    Fairway wood - Under construction
    Irons - Under Construction
    Wedges - Under Construction
    Odyssey Versa 6
    Srixon Zstar XV

    WITB- http://www.golfwrx.c.../page__st__1590


    Instagram-
    On -, @Jminis13





  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • Deuce78Deuce78  1324WRX Points: 128Members Posts: 1,324 Platinum Tees
    Joined:  #8

    I have been using steelfiber 125x for about 3 years now. I will be watching. Thanks for doing a review.

    Posted:
    M5/G410
    On -, @6.5 loft HZRDUS T1100 65g 6.5

    PING G410 [email protected] HZRDUS T1100 75g 6.5 
    PING G410 17.5 HZRDUS T1100 85g 6.5
    Nike vapor fly pro 2 iron black tie 105x
    MP32/712mb/MP69/714mb/MP4/s55/900 Tour/iblade/5-7-965 combo/MP63/iblade 3-PW/P7TW 3-PW
    Vokey sm6/Tour Gorge/Glide 2.0/ vacant 52 / TVD K 58
    NIPPON 1150gh X flex/kbs tour V 120x/Steelfiber 125x/S400
    Kuchar #1/Lamont Mann Custom ARM LOCK/custom Arm Locks-Scotty, Odyssey, TM
  • GolfingfanaticGolfingfanatic  3538WRX Points: 504Handicap: 3.0Members Posts: 3,538 Titanium Tees
    Joined:  #9

    How visible/annoying are the shaft graphics at address?

    Posted:
    Callaway Mavrik 10.5° w/ Aldila Rogue White 70 130MSI X
    TaylorMade M2 DF 16.5° w/ Mitsu Diamana W 80X
    Cobra F9 Speedback 4 iron w/ Graphite Design Tour AD IZ Hybrid 95X
    Yonex Ezone CB-301 4-PW w/ Nippon Modus 125X
    Callaway Mack Daddy 4 Raw 50 S-Grind
    Callaway Mack Daddy 4 Raw 56 X-Grind
    Vokey Low Bounce K-Grind 60
    TaylorMade Spider Mini Copper

  • jj9000jj9000  2725WRX Points: 447ClubWRX Posts: 2,725 ClubWRX
    Joined:  #10

    Interested and following this thread.

    Posted:
  • QuigleyDUQuigleyDU  9598WRX Points: 3,073Handicap: 8Members Posts: 9,598 Titanium Tees
    Joined:  #11

    Looking forward to this review. I just switch to composite iron shafts. They are a few years old and I do not think they are even made anymore. Aldila rip SLT tour 115 shafts. So far, I think I am a convert to graphite. I am interested in a few newer options, including these, the fuji MCI shafts, and a couple others.

    Composite irons shafts is the future. Just pricey.

    Posted:
    Driver: Callaway Epic SubZero 3D 9*, Fujikura Ventus 7X
    3 iron Cobra King Utility Aldila Rouge 90 X flex
    4-PW Mizuno MP-18 MB Aldila RIP SLT Tour 115X Flex
    WEDGES; CLEVELAND RTX4: 52, 58, 64
    PUTTER; Kronos release long neck
    BALL; 2019 ProV1 yellow/Snell MTB-X yellow
  • dmac4gdmac4g  1330WRX Points: 213Members Posts: 1,330 Platinum Tees
    Joined:  #12

    Really looking forward to your review. The fight against Father Time never ends and my elbows would appreciate the help!

    Posted:
  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • J13J13 Dad golf Maryland 16118WRX Points: 1,132Handicap: +1.6Members Posts: 16,118 Titanium Tees
    Joined:  #13

    On -, @Golfingfanatic said:

    How visible/annoying are the shaft graphics at address?

    I had the same concern as I'm a logo down guy but Mitsubishi did a great job in the graphics department. They look high end but subtle with one side being predominantly black with 2 light silver rings. I'm doing some more pics today so you will see first hand what i'm talking about.

    As for everyone else : I'm glad to share the experience. I know a lot of people are in a similar position with joints but also don't want to sacrifice performance, ESPECIALLY with a heavier weighted iron shaft.

    Posted:
    Driver - Under construction
    Fairway wood - Under construction
    Irons - Under Construction
    Wedges - Under Construction
    Odyssey Versa 6
    Srixon Zstar XV

    WITB- http://www.golfwrx.c.../page__st__1590


    Instagram-
    On -, @Jminis13





  • cardoustiecardoustie haha, we don't play for 5's Tasmania to Canada 13328WRX Points: 2,195Handicap: 1.6Members Posts: 13,328 Titanium Tees
    Joined:  edited Oct 2, 2019 #14

    Looking forward to reading this

    As a massive Mitsu fan (I have a motherload of OG white and blueboards in all the weights) I am excited to see this line up and will want to test one for sure.

    (The KK 1050 TiNi felt great in the new 620mb's)

    Also a semi-low capper (0.9 to 3.3 this year) with horrific elbow and hand and wrist pain. Being almost 52 hurts !!!!

    Have tried many graphite iron shaft sets ... Aldila 125 protos, NV105x, Aldila by you 85x, steelfiber 110, fujikura MCI's in both 100 and 120g, and recoils in 95

    Posted:

    Ping G400 LST 11* GD Pershing 55x
    Ping G400 3w 15.1* Oban Revenge 65x
    Callaway GBB 5w 18* Aldila NVS Pink 85x 
    Callaway Apex 4h 23* GD Tour AD DI 95x
    Callaway Apex 5h 26* GD Tour AD DI 105x
    Mizuno 919T 6 - GW UST 95 Recoil f4 
    Ping Glide SS 54* wrx UST 110 Recoil f4
    Ping Glide ES 59* wrx UST 110 Recoil f4
    Callaway PM grind 64* UST 110 Recoil f4
    Piretti Matera Elite 

    '19 Index 0.9 ~ 3.7
  • TinkerGolfManTinkerGolfMan Tinker Golf Man  1395WRX Points: 249Members Posts: 1,395 Platinum Tees
    Joined:  #15

    Looks amazing here! Can't wait to read up on this!

    Posted:
    TaylorMade 2019 M6 9°, Aldila Rogue 110, Golf Pride MCC Plus 4 Align Midsize
    Bomb Tech 3 Wood Fairway 15°, Oban Devotion, Golf Pride MCC Plus 4
    Nike Golf Vapor Speed 5 Wood Fairway 19°, Fujikura 73 Tour Spec, Golf Pride MCC Plus 4
    Mizuno JPX 919/ 4-6 Forged Irons /7-PW Tour Irons, KBS C-Taper, Golf Pride MCC Plus 4
    Artisan Golf ★ custom 50°, 54°, 58°, Nippon Modus 120 Wedge, Golf Pride MCC Plus 4
    Titleist Scotty Cameron 2016 Select Newport 2, SC Custom Shop work: Black Refinish, High-Buff shaft band, Yellow School Bus SC Matador, Face/Weight Stamps.
  • J13J13 Dad golf Maryland 16118WRX Points: 1,132Handicap: +1.6Members Posts: 16,118 Titanium Tees
    Joined:  #16

    On -, @cardoustie said:

    Looking forward to reading this

    As a massive Mitsu fan (I have a motherload of OG white and blueboards in all the weights) I am excited to see this line up and will want to test one for sure.

    (The KK 1050 TiNi felt great in the new 620mb's)

    Also a semi-low capper (0.9 to 3.3 this year) with horrific elbow and hand and wrist pain. Being almost 52 hurts !!!!

    Have tried many graphite iron shaft sets ... Aldila 125 protos, NV105x, Aldila by you 85x, steelfiber 110, fujikura MCI's in both 100 and 120g, and recoils in 95

    I'm with ya brother. The aches and pains have really taken a toll on me this year. In fact my right elbow tendon is partially torn so surgery is most likely the only option. I can still play thanks to the Bandit brace but I can't wait to get this healed up over the winter. After that it's all about prevention.

    Posted:
    Driver - Under construction
    Fairway wood - Under construction
    Irons - Under Construction
    Wedges - Under Construction
    Odyssey Versa 6
    Srixon Zstar XV

    WITB- http://www.golfwrx.c.../page__st__1590


    Instagram-
    On -, @Jminis13





  • mBiden2mBiden2 #15 and counting..... Atlanta, GA 1043WRX Points: 267Handicap: 10.2Members Posts: 1,043 Platinum Tees
    Joined:  #17

    Have you ever tried the TGI 110s? Or are those too light?

    Posted:
    WITB

    Driver - ***under construction***
    3W - ***under construction***
    Irons - ***under construction***
    Wedges - ***under construction***
    Scotty Cameron Studio Select Newport 2 Mid-Slant
  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • J13J13 Dad golf Maryland 16118WRX Points: 1,132Handicap: +1.6Members Posts: 16,118 Titanium Tees
    Joined:  edited Oct 3, 2019 #18

    On -, @mBiden2 said:

    Have you ever tried the TGI 110s? Or are those too light?

    I haven't tried TGI stuff and to be honest I don't have as much interest due to the fact that they don't have experience with graphite. Graphite iron shafts are tricky enough so I feel more confident in companies like Mitsu, UST, Project X who have been working with graphite for a while. The MMT's were the first graphite shafts I was really eager to try as I like the fact that Mitsubishi controls the process from start to finish. I figured (right or wrong) if someone was going to figure out the winning formula it would be them. With that said Recoils are good just lacking in the feel section for me at 125g.

    I have tried 110g offerings from other companies but the overall weight always gets me. I'm a bigger guy so I like having a little heft in my clubs so i don't lose them during my swing.

    Posted:
    Driver - Under construction
    Fairway wood - Under construction
    Irons - Under Construction
    Wedges - Under Construction
    Odyssey Versa 6
    Srixon Zstar XV

    WITB- http://www.golfwrx.c.../page__st__1590


    Instagram-
    On -, @Jminis13





  • QuigleyDUQuigleyDU  9598WRX Points: 3,073Handicap: 8Members Posts: 9,598 Titanium Tees
    Joined:  #19

    have you got these put together yet?

    Posted:
    Driver: Callaway Epic SubZero 3D 9*, Fujikura Ventus 7X
    3 iron Cobra King Utility Aldila Rouge 90 X flex
    4-PW Mizuno MP-18 MB Aldila RIP SLT Tour 115X Flex
    WEDGES; CLEVELAND RTX4: 52, 58, 64
    PUTTER; Kronos release long neck
    BALL; 2019 ProV1 yellow/Snell MTB-X yellow
  • GC70GC70 What's Next? State of Hockey 7723WRX Points: 284Handicap: 7.1ClubWRX Posts: 7,723 Titanium Tees
    Joined:  #20

    B)

    Posted:
    Atmos Blue 6S
     Atmos Red 7S
    Atmos Blue 8S
    Apex CF19 4-AW C-Taper Lite
    SM7's RAW 50F - 54S - 58M - 62M
    Nike 006 Paul Casey Proto (Oven)
    Nike 006 Rory Proto (Oven)
    Scotty T22 Newport
    Pro V1x /

    WITB Link
  • ian-500ian-500  1055WRX Points: 286Handicap: 12Members Posts: 1,055 Platinum Tees
    Joined:  #21

    Having irons built with OTi Tours so I'm interested to find out how the latest shafts from Mitsubishi Chemical goes for you......

    Posted:
    DR: Taylormade Original One 11.5° + Tour AD DI 8x.
    FW: in the making.
    HY: Callaway Apex19 4h 23° + Tour AD IZ 95x.
    Irons: Taylormade R9 Forged 5i-PW + Quadra 100i Pro x.
    Wedges: in the making.
    SeeMore SB1, Accra FX300.
  • J13J13 Dad golf Maryland 16118WRX Points: 1,132Handicap: +1.6Members Posts: 16,118 Titanium Tees
    Joined:  #22

    NEW PICS added to post #2!!!

    Also test irons are drying as we speak so more pics and feedback this weekend from the course!

    Posted:
    Driver - Under construction
    Fairway wood - Under construction
    Irons - Under Construction
    Wedges - Under Construction
    Odyssey Versa 6
    Srixon Zstar XV

    WITB- http://www.golfwrx.c.../page__st__1590


    Instagram-
    On -, @Jminis13





  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • cardoustiecardoustie haha, we don't play for 5's Tasmania to Canada 13328WRX Points: 2,195Handicap: 1.6Members Posts: 13,328 Titanium Tees
    Joined:  #23

    Surely Mitsubishi wants to send 6-pw to CANADA for another big fella that likes heavier stuff

    Posted:

    Ping G400 LST 11* GD Pershing 55x
    Ping G400 3w 15.1* Oban Revenge 65x
    Callaway GBB 5w 18* Aldila NVS Pink 85x 
    Callaway Apex 4h 23* GD Tour AD DI 95x
    Callaway Apex 5h 26* GD Tour AD DI 105x
    Mizuno 919T 6 - GW UST 95 Recoil f4 
    Ping Glide SS 54* wrx UST 110 Recoil f4
    Ping Glide ES 59* wrx UST 110 Recoil f4
    Callaway PM grind 64* UST 110 Recoil f4
    Piretti Matera Elite 

    '19 Index 0.9 ~ 3.7
  • J13J13 Dad golf Maryland 16118WRX Points: 1,132Handicap: +1.6Members Posts: 16,118 Titanium Tees
    Joined:  #24

    On -, @cardoustie said:

    Surely Mitsubishi wants to send 6-pw to CANADA for another big fella that likes heavier stuff

    Too cold up there for these shafts haha :smiley:

    Posted:
    Driver - Under construction
    Fairway wood - Under construction
    Irons - Under Construction
    Wedges - Under Construction
    Odyssey Versa 6
    Srixon Zstar XV

    WITB- http://www.golfwrx.c.../page__st__1590


    Instagram-
    On -, @Jminis13





  • getair23getair23  2224WRX Points: 375Members Posts: 2,224 Platinum Tees
    Joined:  #25

    J- looking forward to updates. I might be more impressed(jealous) with your backup 745's.

    Posted:
    Titleist TS3 9.5  HZRDUS Smoke Green 6.5TX 
    Titleist TS2 15 Aldila Rogue 70x 
    Srixon Z 745 (4-9) Z 945 (pw) KBS tour-x
    Mizuno T20 51, 54, 60, 64 TT x-100
    Miura KM 007
    Pro V1
  • cardoustiecardoustie haha, we don't play for 5's Tasmania to Canada 13328WRX Points: 2,195Handicap: 1.6Members Posts: 13,328 Titanium Tees
    Joined:  #26

    On -, @J13 said:

    On -, @cardoustie said:

    Surely Mitsubishi wants to send 6-pw to CANADA for another big fella that likes heavier stuff

    Too cold up there for these shafts haha :smiley:

    the tip and tuck was not fun yesterday. 7400 yards, raining, 2 club breeze, wind chill around 40. Hit driver on 3 of the 4 par threes

    Posted:

    Ping G400 LST 11* GD Pershing 55x
    Ping G400 3w 15.1* Oban Revenge 65x
    Callaway GBB 5w 18* Aldila NVS Pink 85x 
    Callaway Apex 4h 23* GD Tour AD DI 95x
    Callaway Apex 5h 26* GD Tour AD DI 105x
    Mizuno 919T 6 - GW UST 95 Recoil f4 
    Ping Glide SS 54* wrx UST 110 Recoil f4
    Ping Glide ES 59* wrx UST 110 Recoil f4
    Callaway PM grind 64* UST 110 Recoil f4
    Piretti Matera Elite 

    '19 Index 0.9 ~ 3.7
  • autronicdsmautronicdsm  802WRX Points: 98Handicap: 999Members Posts: 802 Golden Tee
    Joined:  #27

    On -, @J13 said:

    Umm... who is rolling these shafts?! ****... I know it probably doesn't affect it but still :astonished:

    Posted:
  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • J13J13 Dad golf Maryland 16118WRX Points: 1,132Handicap: +1.6Members Posts: 16,118 Titanium Tees
    Joined:  edited Oct 5, 2019 #28

    On -, @autronicdsm said:

    On -, @J13 said:

    Umm... who is rolling these shafts?! ****... I know it probably doesn't affect it but still :astonished:

    haha did you read why it's like that? It's on purpose

    "Very cool the way they wound the steel into the graphite. From my understanding, the spiral design (instead of a perfect circle) is so the steel bonds properly to the graphite with the resin."

    Posted:
    Driver - Under construction
    Fairway wood - Under construction
    Irons - Under Construction
    Wedges - Under Construction
    Odyssey Versa 6
    Srixon Zstar XV

    WITB- http://www.golfwrx.c.../page__st__1590


    Instagram-
    On -, @Jminis13





  • J13J13 Dad golf Maryland 16118WRX Points: 1,132Handicap: +1.6Members Posts: 16,118 Titanium Tees
    Joined:  #29

    On -, @cardoustie said:

    On -, @J13 said:

    On -, @cardoustie said:

    Surely Mitsubishi wants to send 6-pw to CANADA for another big fella that likes heavier stuff

    Too cold up there for these shafts haha :smiley:

    the tip and tuck was not fun yesterday. 7400 yards, raining, 2 club breeze, wind chill around 40. Hit driver on 3 of the 4 par threes

    Yeah that's not happening. 7400 yds at 40? NOPE

    Posted:
    Driver - Under construction
    Fairway wood - Under construction
    Irons - Under Construction
    Wedges - Under Construction
    Odyssey Versa 6
    Srixon Zstar XV

    WITB- http://www.golfwrx.c.../page__st__1590


    Instagram-
    On -, @Jminis13





  • autronicdsmautronicdsm  802WRX Points: 98Handicap: 999Members Posts: 802 Golden Tee
    Joined:  #30

    On -, @J13 said:

    On -, @autronicdsm said:

    On -, @J13 said:

    Umm... who is rolling these shafts?! ****... I know it probably doesn't affect it but still :astonished:

    haha did you read why it's like that? It's on purpose

    "Very cool the way they wound the steel into the graphite. From my understanding, the spiral design (instead of a perfect circle) is so the steel bonds properly to the graphite with the resin."

    I saw it now after I re-read your post haha. Where can I read up on it more? I was getting ready to order a set and then saw your post so I'm waiting for review now :wink:

    Posted:
  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • Cruisin1966Cruisin1966 Calgary, AB 1023WRX Points: 264Handicap: WIPClubWRX Posts: 1,023 ClubWRX
    Joined:  #31

    On -, @autronicdsm said:

    On -, @J13 said:

    On -, @autronicdsm said:

    On -, @J13 said:

    Umm... who is rolling these shafts?! ****... I know it probably doesn't affect it but still :astonished:

    haha did you read why it's like that? It's on purpose

    "Very cool the way they wound the steel into the graphite. From my understanding, the spiral design (instead of a perfect circle) is so the steel bonds properly to the graphite with the resin."

    I saw it now after I re-read your post haha. Where can I read up on it more? I was getting ready to order a set and then saw your post so I'm waiting for review now :wink:

    Ditto

    Posted:

    Driver: TBD
    Fairway: Taylormade M3 3HL w/ Diamana ZF 80TX
    Hybrid: Srixon H85 w/ ProjectX Hzrdus Black 85S
    Irons: Miura CB57 4-PW w/ Fujikura Pro 115s
    Wedges: Artisan 51º, 56º, 61º
    Putter: Artisan 0117

17

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.