DG120 s300 in wedges

sub20putts · February 25, 2020

Anyone have any feedback on the DG120 S300 shaft in wedges? I was fitted to the DG120 X100 shafts one my irons and currently have stock S200 shafts in my wedges. Thinking of either matching my wedges to the DG120 x100 from my irons, or going with the DG120 S300 instead.

I never tried DG120 S300 shafts, and I haven’t tried the DG120 x100s in my wedges.

The reason I’m looking at the DG120 s300’s is because I swing my wedges a bit slower than my irons, and thinking that the softer option would be a good match.

Thanks!

Cachaulo · February 25, 2020

Some like a little heavier shaft in wedges, did you consider the standard S300 or maybe S400 TI in the wedges?

ani5009 · February 25, 2020

FWIW I also got fitted into the DG120 in X100 for my irons (absolutely love the shafts so far), and the fitter suggested I use the DG120 X100 in my 50* gap wedge and then transition to the regular TT S400 shaft in my 54 and 58. Personally I prefer a little heavier shaft in my wedges so I think it works out nicely that way but I could see an issue if you liked lighter feeling wedges.

sub20putts · February 25, 2020

Interesting, will look into this set up. I haven't done a wedge fitting before, but I probably should. I don't really have a problem with the S200's but never tried anything else. I thought I should try either matching my irons or go a bit lighter, but I might not think about this correctly. Not that it matters, but I also have a 50 and 54, then a 60, but have been debating to bend it to a 58. Thanks for your response.