MP 20 MMC..wow!

Played 9 holes today to try out my new irons. I got MMCs with $ taper 120.

Unbelievable feel and performance.

I've played MP30s, MP57s, MP 4s and JPX 900F..nothing feels like these. I'm not sure if it's just a great combo w the $ tapers, but for me the control, ease thru the turf, soft feel are perfection. It doesn't hurt that they look fantastic at address and in the bag.

Couldn't be more pleased w this set.

Great sticks!! Enjoy!

Congratz on the new sticks and have fun with them!

Ive had mine since December and have yet to hit them on the course with the lockdowns!!! Saturday will be my first time out with them

Through sim time and the last 3 weeks hitting off my mat and net I agree they feel awesome!!. I bet they feel even better off grass

You can’t go wrong with the MMCs! They are great all arounders! I have played the 18s and now the 20s and really would struggle to tell the difference performance wise. Looks and feel is a hands down win for the 20s. I have mine all set at 4 deg gapping from the 22 deg 4 iron to a 46 deg wedge and it works out perfectly. I also have the $taper blacks in 130X. Smooth as silk! I will be wearing the groves out of these irons before they are sold.

Side note I also have a MP 20 HMB/MB combo set that is really darn sweet too with Nippon Modus 125X shafts. I could easily combo in the blades but I really don’t see any benefit to do that. I will just most likely let them sit in the closet for the occasional weeks that I feel I need a change.

I did the same thing with the lofts. I understand its about gapping and "lofts" are just a number, but it drives me nuts having 5 degrees between the 8 - 9 - PW. I went with 4 degrees between everything too

Also just picked up MP20 HMB 3i and 4i off eBay with GD Tour AD DI 105x shafts in both. Cant wait to try those

Hitting them on mats does them no justice. You will love the feel thru the turf.

I got my set in January. Same setup.... $ Taper 120's. Coming from a set of 900 Forged with PX LZ 6.0's (lofts set 1 degree weak) I was looking for a bit more launch and spin. The 900 Forged were in my bag for the 3 years and that is a record by about 2 years ..... so needless to say, I loved them. Best set of irons I've ever owned. That said, when I first got them, it was miserable here in GA...... cold, wet, windy. I was really struggling at first with the distances. I expected to lose about a 1/2 club per iron, but this was substantially worse. My first action was to check lofts and lies and they were all over the place. This immediately helped so I encourage you to do the same as these things are SOFT! Very difficult to adjust in minor increments. Now that it's warmed up a bit, I'm really starting to see the payoff. I gained the launch and spin when I want it, but I haven't lost as much distance as I expected. For some irons, it's equal.

These things are great. I guess my only concern is the life span of these. I'm already seeing wear on the grooves, likely increased due to wet range balls and mats, but I don't get the feeling that these are going to last 3 years like my last set.

Absolutely love mine with the Modus 120. As a poster suggested, great all rounders. I have the 5 iron HMB but could have easily played the MMC 5 iron as they launch beautifully. Very happy with my purchase. @JoeFrigo I would be very interested on your feedback on the HMB 3 iron with the ADDI 105x shaft. This is the hybrid shaft? My buddy has a 95x in his Fli Hi 2 iron and the ball flight is a thing of beauty.

Interesting about the lofts.

As fas as lifespan, I wouldn't worry about that.

I still have my MP 30s from over 2 decade of use and abuse. The may look beat to hell, but they perform exactly the same as always.

Should be here today!!!

And sry, I got my info wrong. The 3i has the 95x Utility DI shaft. The 4i has the 105x Hybrid DI shaft......... I currently have and love my p790 UDI with a Pro Orange 90x and its a monster. Im hoping the 3i gives me a higher flight with more spin. The UDI is incredible off the tee and I have no issues with it at all, but I think the 3i will be more useful overall

As long as it stays dry here I should get my round in on Saturday and report back!

Ive only gotten 2 rounds with it so far but its been awesome...so much so that I sold the 790 UDI already! Used it for 3 tee shots and hit all 3 fairways. Completely different flight than the UDI w/ Tensei Pro Orange. Distance wasn't my deciding factor bc the UDI is definitely longer by 10 yards minimum, but I wanted versatility. Ive been able to use the 3i from the rough twice also into par 5's. Much easier to make solid contact with the HMB 3i form the rough vs the UDI

I mentioned I also got a 4i but have not brought that on the course yet

when i was fitted these were the best along with the i210.

They look and feel incredible.

I would love to put them against the t100

Nice, did you blend at all? The 3i HMB is great, as someone who is too donkey brained to hit a fairway wood it’s awesome.

I did not.

I wanted to go PW-8 MB and the rest in MMC, but I found a great deal on my MMCs w the shaft I wanted.

I am having issues with the 4iron. I need to take them to someone to check the lie/lofts. I normally have no issues hitting a 4 iron, even a blade, but I consistently hit this heavy and even when I hit it solid the ball flight is super low. Something seems off.

Love mine with the black 130 $-taper. I have 3 sets of irons that are all very similar but the MMCs stay in the bag.

I did a combo set. 4,5,6 in the HMB, 7,8,9 in the MMC pw in the MB and shafted them with DG tour issue 120 X100's. To put this in perspective, my 8i has been a 155-159 carry club for years. ive adjusted lofts a little bit to suit gapping, but I played a 174yd par 3 Saturday and hit 8i (no wind) to 12 feet. they're long, accurate, and have fantastic feel. I wouldn't change my set makeup for anything.

They are great looking clubs, I would buy a set if I could.

How do you like the HMBs? I was thinking about trying a 3i or 4i in HMB.

My combo set will arrive Friday. Can’t wait. MMCs in 5-8, MB in 9 and PW. Already have the HMB in 2-4 iron and they absolutely fly off the face.

Congrats. I found no difference with the MP18s so I stayed with those. The MMC series is good.

Its finally starting to warm up here in NY. played Saturday in about 70* temps. The feel off the face is superb. They arent as "soft" as an MP20MB or MMC but id say they have better feel than an AP2 for sure. I strengthened the loft on my HMB's 1* and 2* on my MMC and MB. The HMB 5iron was flying as far as my old 716T-MB Titleist 4iron used to. They feel great, launch well, are long, forgiving and everything i was looking for in a middle and long iron setup.

clubs are unreal!

tried them again. Super soft and long and forgiving

The MMCs w $ tapers have been great for me.

The feel is amazing and I feel like I have control of my irons for the first time in a while.

My only grip is my 4i. I need to have the loft and lie checked. I usually have no issues with 4iron. I played MP30s and MP57s before and never had issues w hitting solid 4 irons. But this club seems to launch really low and I'm constantly hitting it fat.

The rest of the set has been fantastic.

MMC up 6 and 4-5 HMB with C-Taper here.

Love them all the way around. The HMBs are perfect in the long irons, launch high and boogie.

I splurged on the MMCs this spring, 4-W, with the Project-X LZ 6.0 shafts.

I've only hit them on the range thus far but I'm very impressed and happy with them. Super soft yet responsive feel across the face. More forgiving than I had expected for me--especially with my typical miss low and on the heel. Trajectory is great and consistence across the whole set. Distance gaps appear close to where I want them--but I'll need to play them a few times to make sure.

Just put the mp18 mmc in play with s400. Smallish head with some tech. Very nice

Chiming in here - current MP54 user here. MP20 MMC are longer, softer, and a ton more forgiving. I was blown away.

I'm buying a set, finalizing specs with my fitter this Fri.

suprising to hear. the 54s were pretty big. I would think the MMC would be less forgiving. Did you ever play MP53?