True Temper Shaft codes

Howard JonesHoward Jones Members Posts: 8,853 ✭✭
edited Nov 5, 2016 in WRX Club Techs #1
How to read them
Dynamic Gold 300/100 Parallel

UDGIR - 41 Dynamic Gold R300 Parallel 127 Gr.

UDGIS - 41 Dynamic Gold S300 Parallel 130 Gr.

UDGIX - 41 Dynamic Gold X-100 Parallel 134 Gr.



Dynamic Gold 300/100 Taper

DGIRL 41-37 Dynamic Gold R300 Taper 127 Gr.

DGISL 41-37 Dynamic Gold S300 Taper 130 Gr.

DGIXL 41-37 Dynamic Gold X-100 Taper 132 Gr.



Dynamic Gold 400 Parallel

UDGIR - 41 Dynamic Gold R400 Parallel 131 Gr.

UDGIS - 41 Dynamic Gold S400 Parallel 134 Gr.



Dynamic Gold 400 Taper

DGIRL 41-37 Dynamic Gold R400 Taper 129 Gr.

DGISL 41-37 Dynamic Gold S400 Taper 132 Gr.



Dynamic Gold SL 300 /100 Parallel

UDGSLIR3 - 41 Dynamic Gold SL R300 Parallel 104 Gr.

UDGSLIS3 - 41 Dynamic Gold SL S300 Parallel 109 Gr.

UDGSLIX1 - 41 Dynamic Gold SL X-100 Parallel 109 Gr.



Dynamic Gold SL 300/100 Taper

DGSLIR3 41-37 Dynamic Gold SL R300 Taper 104 Gr.

DGSLIS3 41-37 Dynamic Gold SL S300 Taper 106 Gr.

DGSLIX1 41-37 Dynamic Gold SL X-100 Taper 108 Gr.



DynaLITE Gold XP Parallel

UMZLIRL - 41 Dynalite Gold XP R300 Parallel 117 Gr.

UMZLISL - 41 Dynalite Gold XP S300 Parallel 121 Gr.



DynaLITE Gold XP Taper

MZLIRL 41-37 Dynalite Gold SL R-flex Taper 113 Gr.

MZLISL 41-37 Dynalite Gold SL S-flex Taper 117 Gr.

MZLIXL 41-37 Dynalite Gold SL X-flex Taper 120 Gr.



DynaLITE Gold SL 300 Parallel

ULGSLiR3-41 Dynalite Gold SL R300 Parallel

ULGSLiS3-41 Dynalite Gold SL S300 Parallel



DynaLITE Gold SL 300/100 Taper

LGSLIR3 41-37 Dynalite Gold SL R300 Taper

LGSLIS3 41-37 Dynalite Gold SL S300 Taper

LGSLIX1 41-37 Dynalite Gold SL X-100 Taper



GS75 Parallel

UGS75IR - 40 GS75 R Flex - Parallel

UGS75IS -40 GS75 S Flex - Parallel



GS85 Parallel

UGS85iR GS85 R-Flex - Parallel

UGS85IS GS85 S-Flex - Parallel



GS85 Taper

GS85iR GS85 R-Flex - Taper

GS85iS GS85 S-Flex - Taper



GS95 Parallel

UGS95IR GS95 R Flex - Parallel

UGS95iS GS95 S Flex - Parallel



GS95 Taper

GS95iR GS95 R Flex - Taper

GS95iS GS95 S Flex - Taper



DG Spinner Taper

SNDGSPINW 37- DG Spinner Taper

SNDGSPINWPLUS 37 - DG Spinner PLUS Taper



TOUR ISSUE



Dynamic Gold Tour Issue

DGiSL400 - Set TI 3-PW - Dynamic Gold Tour Issue S400 132 Gr.

DGiSL400 - 37 TI - Dynamic Gold Tour Issue S400 Wedge 132 Gr.

DGiSL400 - 41.50 TI - Dynamic Gold Tour Issue S400 #2 132 Gr.

DGiSL400 - 42 TI - Dynamic Gold Tour Issue S400 #1 132 Gr.

DGiSLX100 - Set Ti 3-PW - Dynamic Gold Tour Issue X-100 130 Gr.

DGiSLX100 - 37 Ti - Dynamic Gold Tour Issue X-100 Wedge 130 Gr.

DGiSLX100 - 41.50 Ti - Dynamic Gold Tour Issue X-100 #2 130 Gr.

DGiSLX100 - 42 Ti - Dynamic Gold Tour Issue X-100 #1 130 Gr.



TOUR X7

DGTiX7 41-37 Dynamic Gold X7 132 Gr.

DGTiX7 42.00 #1

DGTiX7 41.50 #2

DGTiX7 37.00 #GW

DGTiX7 36.50 #SW



Tour Concept (Flighted)

TCiR3 Tour Concept Satin R300 - Taper 126 Gr.

TCiS3 Tour Concept Satin S300 - Taper 126 Gr.

TCiX1 Tour Concept Satin X100 - Taper 126 Gr.



Tour Prototype (Monaco-Flighted)

MTIS Tour Prototype Satin S - Taper 122 Gr.

MTIX Tour Prototype Satin X - Taper 127 Gr.

MTITX Tour Prototype Satin TX - Taper 135 Gr.



Project X



Project X - Parallel

6850 41.5-37 Project X 5.0 - Parallel

6868 41.5-37 Project X 5.5 - Parallel

6860 41.5-37 Project X 6.0 - Parallel

6878 41.5-37 Project X 6.5 - Parallel

6888 41.5-37 Project X 7.0 - Parallel



Project X - Taper

6850TT 41.5-37 Project X 5.0 - Taper

6868TT 41.5-37 Project X 5.5 - Taper

6860TT 41.5-37 Project X 6.0 - Taper

6878TT 41.5-37 Project X 6.5 - Taper

6888TT 41.5-37 Project X 7.0 - Taper



Project X Flighted- Parallel

684 42-37.5 Project X Flighted 5.0 - Parallel

685 42-37.5 Project X Flighted 5.5 - Parallel

686 42-37.5 Project X Flighted 6.0 - Parallel

687 42-37.5 Project X Flighted 6.5 - Parallel

688 42-37.5 Project X Flighted 7.0 - Parallel



Project X Flighted- Taper

6842TT 42-37.5 Project X Flighted 5.0 - Taper

6852TT 42-37.5 Project X Flighted 5.5 - Taper

6862TT 42-37.5 Project X Flighted 6.0 - Taper

6872TT 42-37.5 Project X Flighted 6.5 - Taper

6882TT 42-37.5 Project X Flighted 7.0 - Taper



Rifle



Rifle - Parallel Tip

URIFM40 Rifle 4.0 Parallel

URIFM45 Rifle 4.5 Parallel

URIFM50 Rifle 5.0 Parallel

URIFM55 Rifle 5.5 Parallel

URIFM60 Rifle 6.0 Parallel

URIFM65 Rifle 6.5 Parallel

URIFM70 Rifle 7.0 Parallel



Rifle - Taper Tip

RIFM40 Rifle 4.0 Taper

RIFM45 Rifle 4.5 Taper

RIFM50 Rifle 5.0 Taper

RIFM55 Rifle 5.5 Taper

RIFM60 Rifle 6.0 Taper

RIFM65 Rifle 6.5 Taper

RIFM70 Rifle 7.0 Taper



Rifle Flighted - Parallel Tip

URIFMF40 Rifle Flighted 4.0 Parallel

URIFMF45 Rifle Flighted 4.5 Parallel

URIFMF50 Rifle Flighted 5.0 Parallel

URIFMF55 Rifle Flighted 5.5 Parallel

URIFMF60 Rifle Flighted 6.0 Parallel

URIFMF65 Rifle Flighted 6.5 Parallel

URIFMF70 Rifle Flighted 7.0 Parallel



Rifle Flighted - Taper Tip

RIFMF40 Rifle Flighted 4.0 Taper

RIFMF45 Rifle Flighted 4.5 Taper

RIFMF50 Rifle Flighted 5.0 Taper

RIFMF55 Rifle Flighted 5.5 Taper

RIFMF60 Rifle Flighted 6.0 Taper

RIFMF65 Rifle Flighted 6.5 Taper

RIFMF70 Rifle Flighted 7.0 Taper



Rifle Spinner - Parallel

URSWE145 Rifle Spinner 4.5 Parallel

URSWE150 Rifle Spinner 5.0 Parallel

URSWE155 Rifle Spinner 5.5 Parallel

URSWE160 Rifle Spinner 6.0 Parallel

URSWE165 Rifle Spinner 6.5 Parallel



Rifle Spinner - Taper

RSWE145 Rifle Spinner 4.5 Taper

RSWE150 Rifle Spinner 5.0 Taper

RSWE155 Rifle Spinner 5.5 Taper

RSWE160 Rifle Spinner 6.0 Taper

RSWE165 Rifle Spinner 6.5 Taper



EDIT

Added Tour X7 Single shafts
Post edited by Unknown User on

Comments

  • rgolf06rgolf06 Members Posts: 165 ✭✭
  • chris_golfchris_golf Members Posts: 423
    Great list... only missing is the DGISM 37 DGIT shaft, these shafts are in my wedges...

    From the stepping it could be a DG S300 or S400 - somebody know the flex and weight to this Shaft code?



    Thank you in advance...
    M2 8.75 Diamana Blueboard x5ct 73 X
    Cally XR16 3+ Diamana Blueboard x5ct 83 X
    Cally Apex Hybrid 2 18 Diamana Blueboard x5ct 103 X
    Cally Apex UT 21 + 24 KBS S
    Cally MB Prototypes ..R..V / DG X100 5-9 (28,32,36,40,44)
    Cally MackDaddy2 47 / DG S200
    Cally MackDaddy 2 Tour Grind 52 + 58 / DG S400
    Odysse TriForce3 adjustable length
    WITB Link
  • kobes31kobes31 EFF Members Posts: 792 ✭✭
    Any help on a 6861 code?
  • jaskanskijaskanski Members Posts: 9,250 ✭✭
    kobes31 wrote:


    Any help on a 6861 code?




    That's a PX 6.0 HL. The high launch version of the normal iron shaft - it's parallel tip too.
  • cliff1675cliff1675 Members Posts: 149 ✭✭
    I just purchased two sets of TT AMT s400 shafts from the bay. One set has a stamp that after the length designation there is nothing, but the other set has the length designation followed by a "-T". Can someone help me understand if this means "tapered", "tour" or something else? Thanks.
  • cliff1675cliff1675 Members Posts: 149 ✭✭
    Also, in case it matters to the question, the "T" set are 1/4 longer from the shaft end to the first step.



    Thanks.
  • NYCgolfer17NYCgolfer17 Members Posts: 1,595 ✭✭
    If mine says "DGIXL100-37" , "DGIXL100-38.5" etc....Is that tour issue or regular X100's? Is don't see that exact code in your list.
    G400 LST -Tensei Pro Orange 70TX
    G25 3W - Ping tour X-Flex
    G30 5W - Ping Tour X
    MP 5 - TI X100
    Vokey 50/54/58
    DJ Spider Ltd
  • Ricco43Ricco43 Members Posts: 125 ✭✭
    Any specs for XP S300 ?
  • IsleOfManIsleOfMan Members Posts: 2,309 ✭✭
    edited Nov 4, 2016 #10
    Anyone have any idea what flex "J200" would indicate? Maybe some sort of wedge flex? I have a Dynalite Gold pulled from a Scratch 8620 PW with the code "LGISLJ200" and I'm curious to exacty what is and if I might want to play it in my GW between Dynalite Gold XP S300s in 5-PW and FST Hi-Rev in my SW and LW.
    Cobra King F8+ Driver 10.5* | Matrix 65M4 Black Tie S
    Cobra King F8 3/4w 14.5* | Aldila NV Blue 2KXV S
    Cobra King F8 5/6w 17.5* |
    Aldila NV Blue 2KXV S
    [font=helvetica, arial, sans-serif]Cobra [/font][font=helvetica, arial, sans-serif]King F8[/font] 4h 22* | Aldila Rogue Pro 75 S
    Cobra Bio Cell + 5i - Gw | TT Dynalite Gold XP S300
    Cobra King WideLow 56* & 60* | TT Dynamic Gold S200
    Cleveland TFi 2135 Satin Elevado CB Putter | 35" Counterbalance
    Ogio OZone Cart | Ogio Shredder Stand
    | Orlimar Pitch & Putt Stand
  • TrueTemperTrueTemper Sponsors Posts: 1,250 ✭✭
    I believe that is an older part number for a Dynalite Gold S200.



    118 grams, flexible tip section.



    DB
    WI Don's Bag Dr- EvenFlow Blue, FWs- HZRDUS Red Hy- EvenFlow Blue, Irons- Prototypes
  • IsleOfManIsleOfMan Members Posts: 2,309 ✭✭
    Can anyone help identify shaft code that appears to be "USNSL IMN 43.0"? The shaft band looks like a Dynamic Gold Sensicore band with just the Sensicore logo and no "Dynamic Gold". The band lists flex as "R". The 4i has ~12" to the first step. After that, the step pattern goes 1/2", 1/2", 3/4", 3/4", 3/4", 1", 1", 1 3/4", 2 1/2", 1", 1", 1 1/8", 1", 1 1/8", 2", 2 1/2". It feels heavy and boardy, akin to a DG S300, and is very low launching. I THINK these were a stock offering in the Cleveland TA7 as that's what I received them in. Any help is appreciated. Thanks in advance!
    Cobra King F8+ Driver 10.5* | Matrix 65M4 Black Tie S
    Cobra King F8 3/4w 14.5* | Aldila NV Blue 2KXV S
    Cobra King F8 5/6w 17.5* |
    Aldila NV Blue 2KXV S
    [font=helvetica, arial, sans-serif]Cobra [/font][font=helvetica, arial, sans-serif]King F8[/font] 4h 22* | Aldila Rogue Pro 75 S
    Cobra Bio Cell + 5i - Gw | TT Dynalite Gold XP S300
    Cobra King WideLow 56* & 60* | TT Dynamic Gold S200
    Cleveland TFi 2135 Satin Elevado CB Putter | 35" Counterbalance
    Ogio OZone Cart | Ogio Shredder Stand
    | Orlimar Pitch & Putt Stand
  • donjulioviidonjuliovii Members Posts: 2
    Anyone know this one? The guys at true temper aren't sure, but think it might be one made exclusively for Taylormade TMI 1007 R N1937501 122892 12 1 31 AK. Shaft doesn't have a TT stamp, however, so could be anything I guess!
  • Howard JonesHoward Jones Members Posts: 8,853 ✭✭
    edited Aug 9, 2017 #14
    IsleOfMan wrote:


    Can anyone help identify shaft code that appears to be "USNSL IMN 43.0"? The shaft band looks like a Dynamic Gold Sensicore band with just the Sensicore logo and no "Dynamic Gold". The band lists flex as "R". The 4i has ~12" to the first step. After that, the step pattern goes 1/2", 1/2", 3/4", 3/4", 3/4", 1", 1", 1 3/4", 2 1/2", 1", 1", 1 1/8", 1", 1 1/8", 2", 2 1/2". It feels heavy and boardy, akin to a DG S300, and is very low launching. I THINK these were a stock offering in the Cleveland TA7 as that's what I received them in. Any help is appreciated. Thanks in advance!




    Im sorry i did not see your post until today, but Golfworks OEM relacement guide say TA7 was delivered with "True Temper Release Sensicore"



    https://www.golfworks.com/images/art/Cleveland.pdf



    and here is some info about it...

    43 inch and 121 grams as descending weight with Parallel tip, gives a "comparable weight" of 115 grams to Constant weight tapers



    http://www.diamondto...icore-iron.html
  • Hack DaddyHack Daddy Members Posts: 807 ✭✭
    Make this a sticky!
    Nike Vapor Pro Aldilla RIP NL
    Nike VR Covert Tour 2.0 3W Aldilla RIP
    Nike VR Pro Combo 3-PW Nippon Pro Modus 105
    Nike VR 54/58 S300
    Nike B1-01 Black pearl shaft, Cork Tree Pistol
    TP5X
  • GrouchoGroucho Members Posts: 3
    does anyone know what shaft is serial Number:



    L 351 289 771 -1 : 2XLIS ?
Sign In or Register to comment.