GIVEAWAY: Vokey SM8 60* Wedge- ENTER HERE, PING Heppler Anser 2 Putter- ENTER HERE.

Cobra King LTD pro cb/mb irons

 Techgolfer1 ·  
Techgolfer1Techgolfer1 Members  1638WRX Points: 102Posts: 1,638 Platinum Tees
Joined:  in Equipment #1
Anyone have any experiences with these? I hit em last night and I thought they were awesome.
Posted:
I change too much to list it. Working on that...
«13456789
9

Comments

  • LoveSick666LoveSick666 Members  965WRX Points: 0Posts: 965
    Joined:  #2
    Got my set in last week! Only gotten to hit a few of the irons in the simulator at the shop i work at, but they felt great abd i love the look. Should get my first round in with them Monday morning abd i will report back my experience.
    Posted:
  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • Techgolfer1Techgolfer1 Members  1638WRX Points: 102Posts: 1,638 Platinum Tees
    Joined:  #3
    Man I am jealous! I have a set of Ping i irons that I really hit good. I was wanting something Forged, loved the look of the Mizuno MP 25's and I got them at Golfsmith. I just didn't hit them that well, so I took them back for my one trade in. They had a demo set sitting right there and there wasn't anyone hardly there so I sat there for about an hour and wore them out. I really like them. They look nice and tiny but are packed with technology. I am very excited to get them.
    Posted:
    I change too much to list it. Working on that...
  • Techgolfer1Techgolfer1 Members  1638WRX Points: 102Posts: 1,638 Platinum Tees
    Joined:  #4
    MBBG wrote:
    These really have my attention. Trying hard not to buy them since the season is essentially over until April
    <br />
    <br />
    Yes i think you'll be impressed by many manufacturers lineups. I was also very impressed by the titleist Mbs but don't need to be hitting those in the long irons. I wasn't impressed with the cb version of the titleists though. Felt terrible to me. The Cobras are as tiny or tinier than the titleist Mbs in the short irons. They look fantastic. I also read they will be coming out with a chrome version of the Cobras around February but I think the black looks cool. <br />
    <br />
    The mizunos I had were good but I just can't get past the short irons looking so round and the wedge looks big. Honestly I could if I hit them better but I just didn't hit them as straight as my Ping irons. I think I'll hit these Cobras as well or better from what I saw last night.
    Posted:
    I change too much to list it. Working on that...
  • TinkerGolfManTinkerGolfMan Tinker Golf Man Members  1412WRX Points: 260Posts: 1,412 Platinum Tees
    Joined:  #5
    I seen these in the PGA Superstore, they look so bad! I wanna try hitting them!
    Posted:
    TaylorMade 2020 SIM 9°, UST Elements F6 Proto, Golf Pride MCC Plus 4 Align Midsize
    TaylorMade 2020 3 Wood 15°, Fujikira PRO 2.0 6-S, Golf Pride MCC Plus 4
    TaylorMade 2020 3 Hybrid 19°, Fujikura Ventus Blue, Golf Pride MCC Plus 4
    Mizuno JPX 919/ 4-6 Forged Irons /7-PW Tour Irons, KBS C-Taper, Golf Pride MCC Plus 4
    Artisan Golf ★ custom 50°, 54°, 58°, Nippon Modus 120 Wedge, Golf Pride MCC Plus 4
    Titleist Scotty Cameron 2016 Select Newport 2, SC Custom Shop work: Black Refinish, High-Buff shaft band, Yellow School Bus SC Matador, Face/Weight Stamps.
  • StonewalledStonewalled Members  1706WRX Points: 203Posts: 1,706 Platinum Tees
    Joined:  edited Dec 1, 2015 #6
    The Cobra King LTD irons look very impressive in Ricky's new King bag.<br />
    This has to be the best looking set up I have ever seen.<br />
    I was able to find the bag at a price I couldn't pass on, the irons we're supposed to follow but the deal fell thru.<br />
    I was finally able to see the LTDs in person and was not disappointed.<br />
    I only had a chance to hit the 6 and 7 iron off the matts.<br />
    The 6 cb feel was not what I hoped it would be. The Shiels video kinda expressed that same observation.<br />
    The 7 mb felt alot better, I have the flyz pros and would have to take both on the course to give an accurate comparison.<br />
    The fly z irons are 1020 vs 1025 for the LTDs.<br />
    Not sure if average joe like me could tell the difference but maybe one would have a preconceived bias toward the flyz feeling softer.<br />
    Prices in Canada are crazy 1300 this yr vs 899 last yr<br />
    Might have to wait until golf town blows them out next yr.<br />
    <br />
    I warmed up in the simulator at gt with a Mizuno MP-5, 6 iron PX6.5 the cobra cb 6 was not even in the same zip code. Softness wise<br />
    <br />
    If your ordering LTD irons look into a full set of MBs.<br />
    <br />
    Jim.
    Posted:
    Post edited by Unknown User on
  • Techgolfer1Techgolfer1 Members  1638WRX Points: 102Posts: 1,638 Platinum Tees
    Joined:  #7
    I thought all the irons felt good. I do agree the muscles backs felt a tad better. I loved the way the cavities felt as well though. These things would look real awesome with black shafts.
    Posted:
    I change too much to list it. Working on that...
  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • Tee2Green85Tee2Green85 Members  790WRX Points: 41Handicap: 1.6Posts: 790 Golden Tee
    Joined:  #8
    mine will be heer tomorrow, I ordered the full set of blades 2--pw, ill post back after I get some indoor time with them.
    Posted:
    TM M1 460 9.5* Matrix BT 6M3 X
    TM M1 15* Aldila Rogue Black X
    Cobra King Pro MB 2-Pw C-taper 130 X
    Callaway MD3 52* S Grind
    Callaway MD3 58* S Grind
    Odyssey MXM Versa #1
  • Techgolfer1Techgolfer1 Members  1638WRX Points: 102Posts: 1,638 Platinum Tees
    Joined:  #9
    <br />
    mine will be heer tomorrow, I ordered the full set of blades 2--pw, ill post back after I get some indoor time with them.<br />
    <br />
    <br />
    Please let us know! Sweet setup, but I like a little help in those longer irons. I wanna hit those blades in those long irons.
    Posted:
    I change too much to list it. Working on that...
  • youngunz5840youngunz5840 Members  2471WRX Points: 168Posts: 2,471 Platinum Tees
    Joined:  #10
    I think the whole Cobra line is a sleeper as usual for them. I tried the CB/MB and Tec forged and all were great. I dont have the game for the men in black but the few I caught clean felt great.
    Posted:
  • LoveSick666LoveSick666 Members  965WRX Points: 0Posts: 965
    Joined:  #11
    Got my first round in with mine yesterday. Cold as **** but irons felt amazing! Checked the lies today cause i had a little tail to the left with them. They were all 2-3 degrees upright of what i ordered but i easily bent them today. I personally couldn't tell the difference feel wise between the cb long irons and mb short irons. They all felt great to me. Feel is subjective though cause i think these feel miles better then the fly z irons.<br />
    Ordered mine with c-tapers but i think i might go back to the kbs tours. Spin and launch were a little low with the c-tapers. Bonus that if i go back to the kbs tours is that I'll order the custom black ones!
    Posted:
  • TMelectricTMelectric When in doubt, buy both Members  3277WRX Points: 36Handicap: UpPosts: 3,277 Bunkers
    Joined:  #12
    <br />
    Got my first round in with mine yesterday. Cold as **** but irons felt amazing! Checked the lies today cause i had a little tail to the left with them. They were all 2-3 degrees upright of what i ordered but i easily bent them today. I personally couldn't tell the difference feel wise between the cb long irons and mb short irons. They all felt great to me. Feel is subjective though cause i think these feel miles better then the fly z irons.<br />
    Ordered mine with c-tapers but i think i might go back to the kbs tours. Spin and launch were a little low with the c-tapers. Bonus that if i go back to the kbs tours is that I'll order the custom black ones!<br />
    <br />
    <br />
    The black KBS shafts with these heads would be a great looking setup.
    Posted:
    Mizuno JPX 900 driver
    Mizuno JPX 900 3 wood
    Mizuno JPX 900 5 wood
    Mizuno MP 66 irons with Modus 105 shafts
    Scratch 50,55,60 wedges with Steelfibers I95's
    Mizuno MP A303 putter
  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • StonewalledStonewalled Members  1706WRX Points: 203Posts: 1,706 Platinum Tees
    Joined:  #13
    <br />
    Got my first round in with mine yesterday. Cold as **** but irons felt amazing! Checked the lies today cause i had a little tail to the left with them. They were all 2-3 degrees upright of what i ordered but i easily bent them today. I personally couldn't tell the difference feel wise between the cb long irons and mb short irons. They all felt great to me. Feel is subjective though cause i think these feel miles better then the fly z irons.<br />
    Ordered mine with c-tapers but i think i might go back to the kbs tours. Spin and launch were a little low with the c-tapers. Bonus that if i go back to the kbs tours is that I'll order the custom black ones!<br />
    Glad to hear you are impressed with the new cobras. A buddy who has the same set up had stated they were softer than the fly z pros as well. If that's the case all hail the new King Cobra. With those black KBS shafts the LTDs would be off the charts. Pics please.
    Posted:
  • UTace10UTace10 Members  205WRX Points: 33Handicap: 4.8Posts: 205 Fairways
    Joined:  #14
    Here's mine with orange No.1 grips and KBS Tours.
    Posted:
  • StonewalledStonewalled Members  1706WRX Points: 203Posts: 1,706 Platinum Tees
    Joined:  #15
    UTace10 wrote:
    <br />
    Here's mine with orange No.1 grips and KBS Tours.<br />
    Wow very impressive , nice touch with the grips.<br />
    Green grass looks **** nice as well.<br />
    Enjoy your set and thanks for the pic.<br />
    <br />
    jim.
    Posted:
  • kaaayelllkaaayelll Members  822WRX Points: 107Posts: 822 Golden Tee
    Joined:  #16
    <br />
    Got my first round in with mine yesterday. Cold as **** but irons felt amazing! Checked the lies today cause i had a little tail to the left with them. They were all 2-3 degrees upright of what i ordered but i easily bent them today. I personally couldn't tell the difference feel wise between the cb long irons and mb short irons. They all felt great to me. Feel is subjective though cause i think these feel miles better then the fly z irons.<br />
    Ordered mine with c-tapers but i think i might go back to the kbs tours. Spin and launch were a little low with the c-tapers. Bonus that if i go back to the kbs tours is that I'll order the custom black ones!<br />
    <br />
    Let me know if you want to sell the CTapers; I've got a lot of heads looking for shafts. <br />
    <br />
    I should be getting my set of MBs next week I'm guessing. Can't wait, though I think I want to rid the heads of paint fill.
    Posted:
  • LoveSick666LoveSick666 Members  965WRX Points: 0Posts: 965
    Joined:  #17
    I'll let you know if i pull the c-tapers for sure.
    Posted:
  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • No_Catchy_NicknameNo_Catchy_Nickname Kyushu,_JapanMembers  6266WRX Points: 1,513Handicap: mePosts: 6,266 Titanium Tees
    Joined:  edited Dec 2, 2015 #18
    I hit the MB and CB seven iron in the net at a shop today, aas well as the King Cobra Driver. Impressed with all of them, especially the driver, but its price tag is off-putting*. The CBs felt great, and the MBs were just delightful; very satisfying solid feel. However, the MBs cost 20,000 yen per club here ($160), so I don't think I will be getting a set anytime soon, though.<br />
    <br />
    *In Japan, the standard model at Tsuruya will go on sale at around 5,5000 yen ($445). It comes with Graphite Design Cobra Tour AD (MS model?) in S, SR, or R, which is a bit too whippy for me. The pro model is offered with the Speeder Evolution 661 in X, S, and R flex, and that is probably what I'd go for. Shaft options rapidly push the price up towards the $800 dollar range.<br />
    Also, I was pleased to see the standard length in the driver was 45 inches: much easier to hit that the 45.75 in the TM M1.
    Posted:
    Driver: Ping G400 Tour 65S
    4w: TaylorMade R9 stock Fujikura Motore X flex
    7w TaylorMade V-steel, Quadra Fire Express RB 6SX
    Hybrid: RomaRo iBrid 23* Attas EZ 85S
    Irons (4i-PW): Mizuno MP4 Attas 115X 4-PW (+0.5")
    Wedges: Cleveland RTX4 Forged 52* and 58*, DGS400 (both at 35.5")
    Putter: Mac Jack Nicklaus Muirfield/Taylormade TPA XVIII/Wilson 8802

    Old stuff: Tons of persimmon and older irons. 
  • TheRidgeTheRidge Members  98WRX Points: 69Posts: 98 Fairways
    Joined:  #19
    Throw me into the very impressed mix...got 5-pw CB's 11/17...7 rounds with them...I've owned everything, these are silly good...Modus 120's for me
    Posted:
  • mason82mason82 Members  870WRX Points: 91Handicap: 8.8Posts: 870 Golden Tee
    Joined:  #20
    I will be interested to see how the finish holds up.
    Posted:
    Callaway Mavrik 9*, Rogue White 70
    Callaway Mavrik SZ 15*, Rogue White 70
    Callaway Epic Flash 21*, HZDRUS Smoke
    Callaway X Forged 2018 Pro Modus 120
    Ping glide 2.0 Stealth, 50*, KBS 130x
    Ping glide 2.0 Stealth, 56*, KBS 130x
    Ping glide 2.0 Stealth, 60*, KBS 130x
    Odyssey Toulon Portland
  • k12carterk12carter Members  606WRX Points: 54Posts: 606 Golden Tee
    Joined:  #21
    Gotta say I am impressed with the look of the irons. Would love to here some insight on how the black looks against moderate to thick rough.
    Posted:
  • kaaayelllkaaayelll Members  822WRX Points: 107Posts: 822 Golden Tee
    Joined:  #22
    Just got a message that my MB set won't be in for about 5 weeks due to a head shortage. And here I was getting excited to take advantage of the upcoming stretch of decent weather. I guess these will see play next year. 😞
    Posted:
  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • Tee2Green85Tee2Green85 Members  790WRX Points: 41Handicap: 1.6Posts: 790 Golden Tee
    Joined:  #23
    Ok just got mine in today. So far they look and feel fantastic (just hit 100 balls into my net in my garage), just how they felt when I went for my fitting. Sadly the 2 iron heads are on back order for another week so I'm still waiting to put that into play. I will play my first round with my new setup Saturday and report back.
    Posted:
    TM M1 460 9.5* Matrix BT 6M3 X
    TM M1 15* Aldila Rogue Black X
    Cobra King Pro MB 2-Pw C-taper 130 X
    Callaway MD3 52* S Grind
    Callaway MD3 58* S Grind
    Odyssey MXM Versa #1
  • Makuakane_BearMakuakane_Bear Richmond, VAMembers  803WRX Points: 59Handicap: 11Posts: 803 Golden Tee
    Joined:  #24
    <br />
    Ok just got mine in today. So far they look and feel fantastic (just hit 100 balls into my net in my garage), just how they felt when I went for my fitting. Sadly the 2 iron heads are on back order for another week so I'm still waiting to put that into play. I will play my first round with my new setup Saturday and report back.<br />
    <br />
    <br />
    Nice bag! Hit them well!
    Posted:
    Ping G400 LST, 10.0*, Project X Evenflow Black 6.5
    Ping G400,14.5*, Project X Evenflow Blue 6.5
    Ping G410 Hybrid, 19*, Ping Tour 85X 
    Mizuno MP-5 (4-PW), Dynamic Gold X100
    Ping Glide Wedges-50* SS, 54*WS, 58*ES, DG Tour Issue S400
    Bettinardi BB1 Tiki Limited Run/Scotty Cameron Newport 2.5
    Bridgestone Tour B XS
  • kaaayelllkaaayelll Members  822WRX Points: 107Posts: 822 Golden Tee
    Joined:  #25
    Sweet!
    Posted:
  • StonewalledStonewalled Members  1706WRX Points: 203Posts: 1,706 Platinum Tees
    Joined:  #26
    <br />
    Ok just got mine in today. So far they look and feel fantastic (just hit 100 balls into my net in my garage), just how they felt when I went for my fitting. Sadly the 2 iron heads are on back order for another week so I'm still waiting to put that into play. I will play my first round with my new setup Saturday and report back.<br />
    Wow very nice set up.Tee. Looks like you hand picked all the top gear from many manufactures. To include the LTDs in your lineup sends a very positive message about there standings in the collective iron rankings. Thanks for the great pics.<br />
    <br />
    Jim.
    Posted:
  • Techgolfer1Techgolfer1 Members  1638WRX Points: 102Posts: 1,638 Platinum Tees
    Joined:  #27
    I'm very excited to get mine in! They're really good and I've gotta say probably as forgiving on toe hits as I've seen for a players set. Extremely small head design that just looks fantastic.
    Posted:
    I change too much to list it. Working on that...
  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • bluejeeprubibluejeeprubi Ponte Vedra Beach, FloridaMembers  1182WRX Points: 180Posts: 1,182 Platinum Tees
    Joined:  #28
    Man, 5 weeks for a set of mbs. Can I wait or will it be 945s
    Posted:
    G400 lst digital loft at 9 playing at 8
    G400 3w. Xtorsion Black 80tx
    G400 5w. Ad-di 8x
    20 and 24 ft worth hi
    5-pw Miura BB with x100 ti
    60 mack daddy forged
    Nike 006 proto
  • kaaayelllkaaayelll Members  822WRX Points: 107Posts: 822 Golden Tee
    Joined:  #29
    My vote is for these. The 945s are nice, but I actually thought too soft/numb. To me, the harder choice is these or J15 MB if it had to be one or the other.
    Posted:
  • tsur1tsur1 Members  585WRX Points: 102Posts: 585 Golden Tee
    Joined:  #30
    Posted:
    Mizuno ST 200G, Fuji Speeder 757X
    Cobra King LTD 3wd, Speeder 8.2X
    Cobra Fly Z Hybrid Speeder 9.8X
    Mizuno 900 Hot Metal 4-5, 900 Forged 6-GW X100
    Mizuno S18 Gunmetal 56* and 60
    Odyssey Tri Hot #3 copper conversion custom or
    Scotty Cameron Newport Select custom by Embrace Putters
9

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.