I've been playing the SeeMore original FPG for a few years now and it has always been a terrific putter. A couple of weeks back I switched the grip to a SuperStroke 3.0 and added some lead tape to make the head feel a little heavier and now this thing is just plane deadly
I have a mFGP2 Limited 1st Run (204 of 250) putter I bought off someone here on GolfWRX when it was 1st released. After putting a while with it the set-up was all wrong for me. Contacted SeeMore and they were outstanding in helping me and when I got it back from them they even put on a new headcover for no charge. Great Company.
Now for the bad news, it sits in a closest because I cannot putt with it. No idea why as it sits perfect, swings nice and has great feel, I just can't make putts. Guessing its the center shaft design. On a quiet night you can hear it crying asking for another chance. /taunt.gif' class='bbc_emoticon' alt=':taunt:' />
I switched over t a seemore FGP (brass) at the beginning of last year and my putting is better than it has ever been. I picked up a used one to try it out, it had been painted black by the previous owner. After liking it, I ended up having the head stripped down and buffed out, and the inlay areas antiqued for the contrast on the alignment lines. I then sent it off to seemore and they restarted the putter to 37". Great service by seemore, they were very helpful in assisting in the set up of the putter.
Over the last couple of years I had tried a number of different putters and putting styles, including face on putting. I have stuck with the FGP for 1.5 seasons so far and my putting numbers are drastically better. Maybe someday I'll go through a seemore fitting as I have become a believer in their alignment and stroke system
Father in law invited me to his annual member/guest this week for the first time. We started slow the first day but the seemore got hot on the second day and we were able to grind back to the middle of the pack. On the third day the greens were rolling at a 12 or so per the pros. We had a number in our head going into the final round and positioned ourselves well going into the last match of the week. On the last hole I was giving a stroke to everyone in the group and they were all looking at short bogey putts on a tough par 5. I was just off the back edge in 3 and had a foot of rough and then 12ft to a hole running away from me. Tapped it with the seemore just enough to get it out of the grass and we all watched it lazily roll down and drop in the cup to win the last hole for a point. We took our flight by a point. I was nervous about bringing the seemore out for a tournament with so little practice with it, but it has earned it's spot in my bag. Great putter.
Father in law invited me to his annual member/guest this week for the first time. We started slow the first day but the seemore got hot on the second day and we were able to grind back to the middle of the pack. On the third day the greens were rolling at a 12 or so per the pros. We had a number in our head going into the final round and positioned ourselves well going into the last match of the week. On the last hole I was giving a stroke to everyone in the group and they were all looking at short bogey putts on a tough par 5. I was just off the back edge in 3 and had a foot of rough and then 12ft to a hole running away from me. Tapped it with the seemore just enough to get it out of the grass and we all watched it lazily roll down and drop in the cup to win the last hole for a point. We took our flight by a point. I was nervous about bringing the seemore out for a tournament with so little practice with it, but it has earned it's spot in my bag. Great putter.
Thought we heard you yesterday making that putt - Nashville /smile.png' class='bbc_emoticon' alt=':)' />)!! Well done! Always happy to help.
This is a bit of a silly question but, what is the difference between all the different "lines" of putters? Studio, Milled, Private Reserve, etc. Looking for a 100% milled FGP version, don't want to spend more than I "need" to and don't want to not get the best
This is a bit of a silly question but, what is the difference between all the different "lines" of putters? Studio, Milled, Private Reserve, etc. Looking for a 100% milled FGP version, don't want to spend more than I "need" to and don't want to not get the best
Different finishes and different materials. At your convenience give us a call at 615-435-8015 and more than happy to walk you through everything. PR section are limited runs of heads that we get from time to time. Milled is 100% milled product and Studio series is our Nashville series that has a unique finish.
Anyone know which Seemore line of FGP would feel most like my milled Scotty Cameron GoLo S? It produces a beautiful smooth *click* at impact. I had an original brass fgp and I've never had a better stroke than with that putter, but the feel/sound was just dreadful... I recently tried the 303 milled FGP at my local Roger Dunn (used, no new Seemore's in stock), and it produced almost no sound at all, almost too smooth... Is there something in between? Maybe PTM1?
I'm looking to move to one of the Giant series...probably M1t or FGPt...anyone able to tell me about them compared to old models? Also, let me know if you have one to sell me!
I'm using a Giant FGP and had regular FGP in the past.
Giant is ... giant. It's like putting with a brick. It's made from alumnus and has light milling. It feels very clicky. Nothing bad about clicky because milling is light. Take a little bit time to get used to.
I'm looking to move to one of the Giant series...probably M1t or FGPt...anyone able to tell me about them compared to old models? Also, let me know if you have one to sell me!
I played 9 w/ the old brass FGP i have 2 nights ago...made some great putts. I love the idea of the smaller giants....probably need to look at getting one.
I played 9 w/ the old brass FGP i have 2 nights ago...made some great putts. I love the idea of the smaller giants....probably need to look at getting one.
Mini Giant, giant m1t and giant fgpt are awesome to look at! Give it a try when you see it.
Anyone know which Seemore line of FGP would feel most like my milled Scotty Cameron GoLo S? It produces a beautiful smooth *click* at impact. I had an original brass fgp and I've never had a better stroke than with that putter, but the feel/sound was just dreadful... I recently tried the 303 milled FGP at my local Roger Dunn (used, no new Seemore's in stock), and it produced almost no sound at all, almost too smooth... Is there something in between? Maybe PTM1?
I own the carbon steel version of the fgp. It feels great but is definitely quiet and soft when properly struck. Having putted with many models at the store I'd say you are on the right track with the ptm1. I found it to be pleasantly firm.
Anyone know which Seemore line of FGP would feel most like my milled Scotty Cameron GoLo S? It produces a beautiful smooth *click* at impact. I had an original brass fgp and I've never had a better stroke than with that putter, but the feel/sound was just dreadful... I recently tried the 303 milled FGP at my local Roger Dunn (used, no new Seemore's in stock), and it produced almost no sound at all, almost too smooth... Is there something in between? Maybe PTM1?
I own the carbon steel version of the fgp. It feels great but is definitely quiet and soft when properly struck. Having putted with many models at the store I'd say you are on the right track with the ptm1. I found it to be pleasantly firm.
Agree. I just added another FGP as I picked up a CS counterbalanced model and you are right, it can be quiet. I had a great first outing with it making a number of mid length putts. I love the FGP style
Gotta give SeeMore a customer service shoutout. Earlier this week I purchased a couple putters on their website. On one of them they didn't have the headcover I selected in stock. They emailed me but I didn't respond in time for them to deliver the putters before the weekend. B/c they wanted to make sure they were delivered on time, they included TWO other headcovers and said if I didn't like them they would send any other right away. Thoughtful and solid customer service if you ask me.
Didn't get fit and just bought Si5 34" now I think is too long. Is it okay to cut an inch off? Or do you recommend just putting longer grip like Super stroke 2.0XL and grip down on it.
i just cut down a 37'' Giant m1t to 34'' and put a 140cc Golf Pride Tour Snsr Straight grip and it is money. I don't think cutting down is a problem unless Seemore put rear weights in the butt of the shaft....at 34 it's likely you dont have that issue.
New to this forum, don't have a huge amount to offer in terms of gear knowledge, but wanted to add my two cents about SeeMore. I recently rebuilt my set after about a decade of not playing much golf, and I struggled to find the right putter. I auditioned various mallets and blades, but I kept misjudging distance and missing four footers. Finally I tried an FGP Original at my local golf shop, and even though the alignment aids didn't exactly fit my set-up (I had always used a forward press, stood slightly open, and tilted my head to the right so that my sight line was behind the ball), I loved the feel, the weighting, the chrome polished sole, the overall look. Also, I found that my distance control was noticeably better than it was with any other putter I had tried.
As I practiced with the FGP, I started experimenting with my set-up, just to see what would happen if I actually hid the dot. So I squared up my address, straightened out my head, and centered my sight line -- those adjustments were pretty easy. The most uncomfortable part was getting rid of my forward press; the beginning of my stroke didn't feel solid without it. But then I shifted my grip to quiet down my wrists, keeping it traditional but moving my hands a bit farther apart and using a strong extended right-hand index finger. Now I hide the dot every time, and my stroke feels square and sturdy. I'm rolling puts really, really well.
So basically the FGP cleaned up my putting technique, which I hadn't expected but, as it turned out, definitely needed.
A note on customer service: the golf shop where I bought the putter didn't have the right headcover, so they ordered one from SeeMore. They ended up ordering a mallet headcover by mistake. I called SeeMore, and (even though all of this was clearly the golf shop's fault) they said no problem, shipped me a new headcover, told me to keep the other one. Took two minutes. Now I feel genuinely invested in this small company. I'll probably buy a mallet to go with my extra headcover. You got me, SeeMore. Well done.
I put a salty grip on my seemore before playing this weekend. Had my 2 best putting rounds of the season. The light grip with the 340g head are just a wonderful combo for distance control and the larger grip keeps my hands quiet. Loving this setup!
Just played my first 2 rounds with the SeeMore Z3c and really putt pretty well with it. I like the center shaft, my first time playing one. I won't rave or gush about any club until it has been in my bag for a whole season. The honeymoon period has happened too many times to me.
Cobra F9 Tour length with Tensei Pro Orange 60S shaft
Callaway Epic Flash SZ 13.5 degree with GD Tour AD IZ 75 stiff Callaway Super Hybrid 17 degree with Tensei Pro Orange 80 stiff shaft Callaway Super Hybrid 23 degree with Tensei Pro Orange 80 stiff shaft TM P790 5-P with Fujikura Pro 95i shaft stiff tour spec Ping Glide 2.0 raw 50 and 54 degree wedge PM19 60 degree raw wedge TM Spider X Navy Blue 35 inch with white racing stripe
I am back here to say that the Seemore gots lots of love today from me at Golfsmith and PGA SS. The Scotty is going bye bye after demoing a Seemore Corona Del Mar X3. Man that thing feels sweet and I just kept draining them.
Only question is that when I was trying to hide the red dot it looked as if I could see the face of the putter when looking down. That correct?
Wait.. One more question. What would the head weight be for a 34" Corona Del Mar X3?
I am back here to say that the Seemore gots lots of love today from me at Golfsmith and PGA SS. The Scotty is going bye bye after demoing a Seemore Corona Del Mar X3. Man that thing feels sweet and I just kept draining them.
Only question is that when I was trying to hide the red dot it looked as if I could see the face of the putter when looking down. That correct?
Wait.. One more question. What would the head weight be for a 34" Corona Del Mar X3?
Head weight is 360 grams. Loft of the putter head is 2.5 (standard) - might see a bit of the face but it will always be squared to your intended target line.
I am back here to say that the Seemore gots lots of love today from me at Golfsmith and PGA SS. The Scotty is going bye bye after demoing a Seemore Corona Del Mar X3. Man that thing feels sweet and I just kept draining them.
Only question is that when I was trying to hide the red dot it looked as if I could see the face of the putter when looking down. That correct?
Wait.. One more question. What would the head weight be for a 34" Corona Del Mar X3?
Head weight is 360 grams. Loft of the putter head is 2.5 (standard) - might see a bit of the face but it will always be squared to your intended target line.
Thanks for the reply. Dumb question here, adding a Rosemark 1.52 grip won't change the head weight feel too much from the stock grip I demo'd?
I am back here to say that the Seemore gots lots of love today from me at Golfsmith and PGA SS. The Scotty is going bye bye after demoing a Seemore Corona Del Mar X3. Man that thing feels sweet and I just kept draining them.
Only question is that when I was trying to hide the red dot it looked as if I could see the face of the putter when looking down. That correct?
Wait.. One more question. What would the head weight be for a 34" Corona Del Mar X3?
Head weight is 360 grams. Loft of the putter head is 2.5 (standard) - might see a bit of the face but it will always be squared to your intended target line.
Thanks for the reply. Dumb question here, adding a Rosemark 1.52 grip won't change the head weight feel too much from the stock grip I demo'd?
The rosemark 1.52 is 57 grams - what was the grip that you demo'd (not a dumb question - always happy to help)
I am back here to say that the Seemore gots lots of love today from me at Golfsmith and PGA SS. The Scotty is going bye bye after demoing a Seemore Corona Del Mar X3. Man that thing feels sweet and I just kept draining them.
Only question is that when I was trying to hide the red dot it looked as if I could see the face of the putter when looking down. That correct?
Wait.. One more question. What would the head weight be for a 34" Corona Del Mar X3?
Head weight is 360 grams. Loft of the putter head is 2.5 (standard) - might see a bit of the face but it will always be squared to your intended target line.
Thanks for the reply. Dumb question here, adding a Rosemark 1.52 grip won't change the head weight feel too much from the stock grip I demo'd?
The rosemark 1.52 is 57 grams - what was the grip that you demo'd (not a dumb question - always happy to help)
I am back here to say that the Seemore gots lots of love today from me at Golfsmith and PGA SS. The Scotty is going bye bye after demoing a Seemore Corona Del Mar X3. Man that thing feels sweet and I just kept draining them.
Only question is that when I was trying to hide the red dot it looked as if I could see the face of the putter when looking down. That correct?
Wait.. One more question. What would the head weight be for a 34" Corona Del Mar X3?
Head weight is 360 grams. Loft of the putter head is 2.5 (standard) - might see a bit of the face but it will always be squared to your intended target line.
Thanks for the reply. Dumb question here, adding a Rosemark 1.52 grip won't change the head weight feel too much from the stock grip I demo'd?
The rosemark 1.52 is 57 grams - what was the grip that you demo'd (not a dumb question - always happy to help)
Just a black grip that had SEEMORE on it.
With a rosemark you the swing weight will increase by 2-3 swing weight points. Will make it feel a little heavier.
Most responsive company in the business. Quality all the way!
I had an issue and was replied to very quickly. But the reply came from Jim Grundberg, the CEO himself! What an amazing company and is run by quality guys! Thank you so much
Comments
531
0
buckaroo279 - fantastic! Thanks for being a part of team SeeMore!!
n/a
n/a
2851
0
Titleist 915 D2 60gX Rogue Silver
Titleist 906F2 13* ProForce V2 90gX
Titleist 690mb 2-P 6.0PX
Titleist Vokey 52* and 58*
SeeMore FPG Putter
182
8
Now for the bad news, it sits in a closest because I cannot putt with it. No idea why as it sits perfect, swings nice and has great feel, I just can't make putts. Guessing its the center shaft design. On a quiet night you can hear it crying asking for another chance.
423
2
Over the last couple of years I had tried a number of different putters and putting styles, including face on putting. I have stuck with the FGP for 1.5 seasons so far and my putting numbers are drastically better. Maybe someday I'll go through a seemore fitting as I have become a believer in their alignment and stroke system
Wishon 929 4 wood
SL Sterling Irons 5-LW
1262
55
F6 baffler
MP54
T7/S18/eye2XG Lob
Classic #3
531
0
Thought we heard you yesterday making that putt - Nashville
n/a
n/a
208
10
531
0
Different finishes and different materials. At your convenience give us a call at 615-435-8015 and more than happy to walk you through everything. PR section are limited runs of heads that we get from time to time. Milled is 100% milled product and Studio series is our Nashville series that has a unique finish.
157
21
1074
137
2492
19
Giant is ... giant. It's like putting with a brick. It's made from alumnus and has light milling. It feels very clicky. Nothing bad about clicky because milling is light. Take a little bit time to get used to.
Hide the dot works. Mic drop.
n/a
n/a
1074
137
531
0
Mini Giant, giant m1t and giant fgpt are awesome to look at! Give it a try when you see it.
1262
55
I own the carbon steel version of the fgp. It feels great but is definitely quiet and soft when properly struck. Having putted with many models at the store I'd say you are on the right track with the ptm1. I found it to be pleasantly firm.
F6 baffler
MP54
T7/S18/eye2XG Lob
Classic #3
423
2
Agree. I just added another FGP as I picked up a CS counterbalanced model and you are right, it can be quiet. I had a great first outing with it making a number of mid length putts. I love the FGP style
Wishon 929 4 wood
SL Sterling Irons 5-LW
42
0
Great putters and great company behind them....
n/a
n/a
360
2
PRGR 3W
Titleist 7W
Callaway Apex 4h
Ping i25 5h
Srixon Z785 6-PW
Cleveland RTX 2.0 CB 50 58
Toulon San Francisco
Srixon Z545 4i
Titleist 917F 7W
Callaway Apex 3h
1074
137
90
0
As I practiced with the FGP, I started experimenting with my set-up, just to see what would happen if I actually hid the dot. So I squared up my address, straightened out my head, and centered my sight line -- those adjustments were pretty easy. The most uncomfortable part was getting rid of my forward press; the beginning of my stroke didn't feel solid without it. But then I shifted my grip to quiet down my wrists, keeping it traditional but moving my hands a bit farther apart and using a strong extended right-hand index finger. Now I hide the dot every time, and my stroke feels square and sturdy. I'm rolling puts really, really well.
So basically the FGP cleaned up my putting technique, which I hadn't expected but, as it turned out, definitely needed.
A note on customer service: the golf shop where I bought the putter didn't have the right headcover, so they ordered one from SeeMore. They ended up ordering a mallet headcover by mistake. I called SeeMore, and (even though all of this was clearly the golf shop's fault) they said no problem, shipped me a new headcover, told me to keep the other one. Took two minutes. Now I feel genuinely invested in this small company. I'll probably buy a mallet to go with my extra headcover. You got me, SeeMore. Well done.
1262
55
F6 baffler
MP54
T7/S18/eye2XG Lob
Classic #3
3465
13
Callaway Epic Flash SZ 13.5 degree with GD Tour AD IZ 75 stiff
Callaway Super Hybrid 17 degree with Tensei Pro Orange 80 stiff shaft
Callaway Super Hybrid 23 degree with Tensei Pro Orange 80 stiff shaft
TM P790 5-P with Fujikura Pro 95i shaft stiff tour spec
Ping Glide 2.0 raw 50 and 54 degree wedge
PM19 60 degree raw wedge
TM Spider X Navy Blue 35 inch with white racing stripe
n/a
n/a
4853
57
Only question is that when I was trying to hide the red dot it looked as if I could see the face of the putter when looking down. That correct?
Wait.. One more question. What would the head weight be for a 34" Corona Del Mar X3?
TM M2 15* Speeder 757 Evo TS
TM M2 #3 19* Fujikura
PXG 0211 4 Iron Elevate Tour
TM P790 5-AW Modus 105
TM MG2 54*
TM HT Bigfoot 60*
PXG Gen2 Gunboat
4853
57
Golo 7 off to BST. A 34" Corona Del Mar X3 Rosemark 1.52 is calling my name.
TM M2 15* Speeder 757 Evo TS
TM M2 #3 19* Fujikura
PXG 0211 4 Iron Elevate Tour
TM P790 5-AW Modus 105
TM MG2 54*
TM HT Bigfoot 60*
PXG Gen2 Gunboat
531
0
Head weight is 360 grams. Loft of the putter head is 2.5 (standard) - might see a bit of the face but it will always be squared to your intended target line.
4853
57
Thanks for the reply. Dumb question here, adding a Rosemark 1.52 grip won't change the head weight feel too much from the stock grip I demo'd?
TM M2 15* Speeder 757 Evo TS
TM M2 #3 19* Fujikura
PXG 0211 4 Iron Elevate Tour
TM P790 5-AW Modus 105
TM MG2 54*
TM HT Bigfoot 60*
PXG Gen2 Gunboat
531
0
The rosemark 1.52 is 57 grams - what was the grip that you demo'd (not a dumb question - always happy to help)
n/a
n/a
4853
57
Just a black grip that had SEEMORE on it.
TM M2 15* Speeder 757 Evo TS
TM M2 #3 19* Fujikura
PXG 0211 4 Iron Elevate Tour
TM P790 5-AW Modus 105
TM MG2 54*
TM HT Bigfoot 60*
PXG Gen2 Gunboat
531
0
With a rosemark you the swing weight will increase by 2-3 swing weight points. Will make it feel a little heavier.
4853
57
TM M2 15* Speeder 757 Evo TS
TM M2 #3 19* Fujikura
PXG 0211 4 Iron Elevate Tour
TM P790 5-AW Modus 105
TM MG2 54*
TM HT Bigfoot 60*
PXG Gen2 Gunboat
n/a
n/a
620
24
I had an issue and was replied to very quickly. But the reply came from Jim Grundberg, the CEO himself! What an amazing company and is run by quality guys! Thank you so much
Mizuno ST190 3w Kuro Kage Silver 80x