GIVEAWAY: Vokey SM8 60* Wedge- ENTER HERE.

Evnroll Putters-- Amazing!!!

 UGA111384 ·  
UGA111384UGA111384 Members  622WRX Points: 15Handicap: 3Posts: 622 Golden Tee
Joined:  edited Aug 2, 2016 in Putters #1
So I was at the PGA Superstore this afternoon about to go through an Edel fitting for a new putter. While I was waiting for my appointment I went to the putting green to play around with different brands of putters. While back there I noticed a guy in the corner with a logo on his shirt from a company I hadn't heard of yet. So me being drawn to shiny and new decide to go take a look at what putter he was promoting. It was the Evnroll putters. He has all the models, there's only 4, and a few nice gadgets to help measure loft and lie to make sure you got the right putter and perfect fit. After speaking with him for a few minutes he introduces himself as Guerin Rife, former owner of Rife putters and founder of Evnroll putters. After speaking with him and having me go through everything about his new putter, I decided to give a few a try. I must say that I was a bit skeptical but after about 10 putts I was sold. This putter is incredible and really does what he set out to create. A putter that stays online and doesn't lose distance on mis-hits. I ended up walking out with a custom fit, and stamped, ER1 putter and can not wait to take it to the course. If you get a chance to try these out please do so and I promise you won't be disappointed. I just want to give a shout out to Mr, Rife for the free lesson and custom putter. Thanks and everyone go out and at least try these!!!
Posted:
TS3 9.5 w/ HZRDUS Smoke 6.5
Tour Issue M3 15* w/ ATMOS Black 7x
818 H2 19* w/ Tensei White 90x
PXG 0311t 4-PW w/ DGTIS400
SM7 50* and 56* w/ DGTIS400
TVD SM6 60* w/ DGTIS400
Bettinardi Blackout Studio Stock ss28
Post edited by Unknown User on
«13456749
49

Comments

  • ScaldyScaldy Professional Putter Poser Members  517WRX Points: 69Posts: 517 Golden Tee
    Joined:  #2
    Post some pictures!
    Posted:
  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • driveandputtmachinedriveandputtmachine 4 wedges or 2 iron? That is the question! Members  1495WRX Points: 299Handicap: 0.0Posts: 1,495 Platinum Tees
    Joined:  #3
    UGA111384 wrote:
    <br />
    So I was at the PGA Superstore this afternoon about to go through an Edel fitting for a new putter. While I was waiting for my appointment I went to the putting green to play around with different brands of putters. While back there I noticed a guy in the corner with a logo on his shirt from a company I hadn't heard of yet. So me being drawn to shiny and new decide to go take a look at what putter he was promoting. It was the Evnroll putters. He has all the models, there's only 4, and a few nice gadgets to help measure loft and lie to make sure you got the right putter and perfect fit. After speaking with him for a few minutes he introduces himself as Guerin Rife, former owner of Rife putters and founder of Evnroll putters. After speaking with him and having me go through everything about his new putter, I decided to give a few a try. I must say that I was a bit skeptical but after about 10 putts I was sold. This putter is incredible and really does what he set out to create. A putter that stays online and doesn't lose distance on mis-hits. I ended up walking out with a custom fit, and stamped, ER1 putter and can not wait to take it to the course. If you get a chance to try these out please do so and I promise you won't be disappointed. I just want to give a shout out to Mr, Rife for the free lesson and custom putter. Thanks and everyone go out and at least try these!!!<br />
    <br />
    <br />
    I am in Atlanta and have been aching to try something new in a putter. Which PGA Tour Superstore where you in? The Kennesaw and Alpharetta stores are the same distance from my house, the Alpharetta one closer to work.
    Posted:
    Driver - TM SIM on Chrome Elements
    Fairway - TM M5 on Project X HZRDOUS Yellow
    Irons - (4) Cobra Speed Zone on Project X Catalyst 100
    Irons - (5) Srixon 565 on Recoil 110
    Irons - (6) Srixon 565 on Recoil 110
    Irons (7-W) Srixon 765 on Recoil 110
    Wedges - Cleveland CB2 50* and 54*, Cleveland RTX 4 58* and 62* all on UST Recoil 110
    Putter - Mannkrafted MA/66 or Sunset Beach Ocean Isle on UST F FIlter or Taylormade Spider
    Ball - Srixon Z Star or Z Star XV
  • UGA111384UGA111384 Members  622WRX Points: 15Handicap: 3Posts: 622 Golden Tee
    Joined:  #4
    So I got fit at the roswell store but I think that Mr. Rife will be at the Kennesaw store today. You might want to call ahead to see when he is going to be there. It is for sure worth getting fit for them by the guy to makes them vs an employee that knows nothing about them
    Posted:
    TS3 9.5 w/ HZRDUS Smoke 6.5
    Tour Issue M3 15* w/ ATMOS Black 7x
    818 H2 19* w/ Tensei White 90x
    PXG 0311t 4-PW w/ DGTIS400
    SM7 50* and 56* w/ DGTIS400
    TVD SM6 60* w/ DGTIS400
    Bettinardi Blackout Studio Stock ss28
  • jokerusnjokerusn nice shoes Northern NJClubWRX  4939WRX Points: 352Handicap: 9Posts: 4,939 ClubWRX
    Joined:  #5
    How does it set up at address? Does the sole make it easy to square the putter?
    Posted:
    M6 9°  Fujikura Ventus 6
    TS2 15°  Diamana S+ Ltd 70
    790UDI  PX Catalyst 80 -or- 818H2 19°  GD Tour AD IZ-85
    0311T 4i / Z745 5-9  Nippon 950GH 
    SM7 46F 52F 58D  DG 115
    SM7 62M  KBS Tour
    putter, KBS CT Tour, Pro Only *

    (¬¬)
    OLD--WITB Link
  • UGA111384UGA111384 Members  622WRX Points: 15Handicap: 3Posts: 622 Golden Tee
    Joined:  #6
    Yeah I would say it's fairly easily to square the putter up. I really like the two dots and the site line. And the reasoning behind, and I know this will sound weird, the two dots is to help with gear effect on left to right and right to left putts. I didn't believe that philosophy until I tried it last night on an actual left right putt and it sure enough brings it on the line you want it to go.<br /><br />Yeah I would say it's fairly easily to square the putter up. I really like the two dots and the site line. And the reasoning behind, and I know this will sound weird, the two dots is to help with gear effect on left to right and right to left putts. I didn't believe that philosophy until I tried it last night on an actual left right putt and it sure enough brings it on the line you want it to go.
    Posted:
    TS3 9.5 w/ HZRDUS Smoke 6.5
    Tour Issue M3 15* w/ ATMOS Black 7x
    818 H2 19* w/ Tensei White 90x
    PXG 0311t 4-PW w/ DGTIS400
    SM7 50* and 56* w/ DGTIS400
    TVD SM6 60* w/ DGTIS400
    Bettinardi Blackout Studio Stock ss28
  • JustChillJustChill Members  464WRX Points: 42Handicap: 4.9Posts: 464 Greens
    Joined:  #7
    I wish these were somewhere local for me to test out. I am intrigued
    Posted:
    Titleist 910D3 9.5*, Aldila Rogue Silver 60 X
    Titleist 910fd 16.5* Mitsubishi Diamana S+ 82 X
    Titleist 910h 19*, Mitsubishi Diamana Ahina 90HYB S
    Adams CMB, DG AMT S300
    Titleist SM5 50-54-58, DG Wedge
    Toulon Memphis
  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • driveandputtmachinedriveandputtmachine 4 wedges or 2 iron? That is the question! Members  1495WRX Points: 299Handicap: 0.0Posts: 1,495 Platinum Tees
    Joined:  #8
    UGA111384 wrote:
    <br />
    So I got fit at the roswell store but I think that Mr. Rife will be at the Kennesaw store today. You might want to call ahead to see when he is going to be there. It is for sure worth getting fit for them by the guy to makes them vs an employee that knows nothing about them<br />
    <br />
    <br />
    Got to love the "Customer Service" at PGA Tour Superstores. He is in fact at the Kennesaw Store right now. The problem is I have meetings until 3. I asked how long he would be there? She said he is going to leave once he is done. I asked if I could make an appointment, she stated no, that I should try and get there soon before he leaves. I asked again if he would still be there at around 4pm when I could get there she said she didn't know and couldn't ask him. I love PGA Tour SS!
    Posted:
    Driver - TM SIM on Chrome Elements
    Fairway - TM M5 on Project X HZRDOUS Yellow
    Irons - (4) Cobra Speed Zone on Project X Catalyst 100
    Irons - (5) Srixon 565 on Recoil 110
    Irons - (6) Srixon 565 on Recoil 110
    Irons (7-W) Srixon 765 on Recoil 110
    Wedges - Cleveland CB2 50* and 54*, Cleveland RTX 4 58* and 62* all on UST Recoil 110
    Putter - Mannkrafted MA/66 or Sunset Beach Ocean Isle on UST F FIlter or Taylormade Spider
    Ball - Srixon Z Star or Z Star XV
  • UGA111384UGA111384 Members  622WRX Points: 15Handicap: 3Posts: 622 Golden Tee
    Joined:  #9
    Yeah no kidding!! World class service. I got mine done around 4-430 yesterday so I'm sure he will be there til around that time.
    Posted:
    TS3 9.5 w/ HZRDUS Smoke 6.5
    Tour Issue M3 15* w/ ATMOS Black 7x
    818 H2 19* w/ Tensei White 90x
    PXG 0311t 4-PW w/ DGTIS400
    SM7 50* and 56* w/ DGTIS400
    TVD SM6 60* w/ DGTIS400
    Bettinardi Blackout Studio Stock ss28
  • cwolfe888cwolfe888 Members  439WRX Points: 0Posts: 439
    Joined:  #10
    UGA111384 wrote:
    <br />
    So I got fit at the roswell store but I think that Mr. Rife will be at the Kennesaw store today. You might want to call ahead to see when he is going to be there. It is for sure worth getting fit for them by the guy to makes them vs an employee that knows nothing about them<br />
    <br />
    <br />
    Got to love the "Customer Service" at PGA Tour Superstores. He is in fact at the Kennesaw Store right now. The problem is I have meetings until 3. I asked how long he would be there? She said he is going to leave once he is done. I asked if I could make an appointment, she stated no, that I should try and get there soon before he leaves. I asked again if he would still be there at around 4pm when I could get there she said she didn't know and couldn't ask him. I love PGA Tour SS!
    <br />
    <br />
    Pretty comical to trash talk a store that has nothing to do with someone else's schedule. He obviously needed to be flexible and couldn't guarantee a certain time frame he would stay there till. Most of the reps come in to train the employees on product 75% of the time and aren't there for you to schedule a fitting with.
    Posted:
  • J_BirdieJ_Birdie LOFT Issue Members  1864WRX Points: 137Posts: 1,864 Platinum Tees
    Joined:  #11
    I saw that article too and it definitely makes a good case for these putters. I never experienced them to be sellouts so the ferocity of the article has me very interested.
    Posted:
    What's in my bag:
    Cobra F9 Avalance 9* w/ Fujikura ATMOS Black Tour Spec 6X 44.75"
    Cobra F9 Tour 3W w/ Fujikura ATMOS Black Tour Spec 7X 42.5"
    Taylormade P790 UDI 2i / Diamana D+ 92HY X 1* Up 18* loft
    Cobra Forged Tour 4-PW / Nippon NS Pro Modus 120X 1* Up
    Cleveland RTX-4 50* & 55* / Nippon NS Pro Modus 120X
    Callaway PM Grind 2 60* Nippon NS Pro Modus 120X
    Odyssey O-Works 7S Black with Superstroke GT 2.0 Pistol Grip 35"
  • endyendy Members  3746WRX Points: 325Posts: 3,746 Titanium Tees
    Joined:  #12
    Color me intrigued as well, I put up a WTB ad haha! I heard the website crashed due to a spike in volume, I'm guessing from that very article.
    Posted:
    Ping G410 LST 9* Fujikura Ventus Black 7X 
    Ping G410 LST 14.5* Fujikura Ventus Black 8X
    Ping G410 17.5* Fujikura Ventus Black 10X 
    New Level 902 4-P Mitsubishi MMT 125TX  
    New Level M-Type 50/54/60 KBS 610 S+
    PXG Operator P Gen 2 34.5” 
    Bridgestone Tour B X 
  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • FuzzyKnucklesFuzzyKnuckles Members  172WRX Points: 42Handicap: 5Posts: 172 Fairways
    Joined:  #13
    I am very interested as well and may buy one soon
    Posted:
  • vartanickvartanick Members  157WRX Points: 46Handicap: 10Posts: 157 Fairways
    Joined:  #14
    so who´s the first to put the trigger on? (or the second) lol
    Posted:
  • jbadgejbadge Members  21WRX Points: 0Posts: 21
    Joined:  #15
    Are these all face balanced design?
    Posted:
  • moonshinemoonshine 64 @ Augusta? No problem! North Charleston, SCClubWRX  6379WRX Points: 175Handicap: 2.4Posts: 6,379 Titanium Tees
    Joined:  #16
    well their site is down...so...what eva'
    Posted:
    "We have learned that we must
    live as men, not as ostriches, nor
    as dogs in the manger." FDR
  • jbadgejbadge Members  21WRX Points: 0Posts: 21
    Joined:  #17
    moonshine wrote:
    <br />
    well their site is down...so...what eva'<br />
    <br />
    <br />
    Bad time to have the site go down!
    Posted:
  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • mjwidellmjwidell Members  775WRX Points: 87Handicap: +1Posts: 775 Golden Tee
    Joined:  #18
    jbadge wrote:
    <br />
    moonshine wrote:
    <br />
    well their site is down...so...what eva'<br />
    <br />
    <br />
    Bad time to have the site go down!<br />
    <br />
    <br />
    Literally, the traffic from that article crashed the site.
    Posted:
    '16 Taylormade M2 Tour Issue 9.5* TZ6X
    Cobra F9 14.5* Evenflow Blue 75X
    TM P790 UDI 18* ADDI 95X
    Srixon Z945 4-PW Modus 130X
    Cleveland RX4 RTG 50*/54*/58* S400
    TM Spider Ghost S
  • d_smith64_d_smith64_ Members  4WRX Points: 0Handicap: +3Posts: 4
    Joined:  #19
    I bought my Evnroll a couple months ago and have never looked back. I have the er6 mallet and it is the best putter I have used. You can look up some of their models from their instagram page or different videos online. Bummer about their site I'm sure they will have it up quickly. I was fit personally by Guerin Rife in their studio in Carlsbad, was a great experience! You can see first hand how the ball rolls with their roll board fitting technique, made it very easy to see how well the ball rolled which I liked because I have always been a visual learner. No high tech cameras just a velvet roll board that shows you how your ball is making contact with the ground. I loved it!
    Posted:
  • Shi GuyShi Guy Members  55WRX Points: 0Posts: 55
    Joined:  #20
    jbadge wrote:
    <br />
    Are these all face balanced design?<br />
    <br />
    <br />
    No, according to the PGA SS website they all have some degree of toe hang. The Mallets have 5* and the blades have 15*.
    Posted:
  • mb889mb889 Members  156WRX Points: 55Handicap: 9Posts: 156 Fairways
    Joined:  #21
    Pretty interesting. I would love to be fit for one of these. I don't know if I'll see one around these parts for a while though. <br />
    Their site was working for me just now.
    Posted:
    M5 10.5 Diamana B
    M2 16.5 AD DI7
    915 19* diamond blue
    PXG gen1 5-pw
    SM6 50, 54, 60
    Odyssey 7s
  • J13J13 Dad golf MarylandMembers  16524WRX Points: 1,549Handicap: +1.6Posts: 16,524 Titanium Tees
    Joined:  #22
    It's good to see Guerin back in the game. I think Ping's TR groove system is really good as well as Evnroll's. Still comes down to the guy swinging the stick though.
    Posted:
    Driver     -     Cobra SZ Xtreme 9* w/ Tensei Orange 70TX
    3W         -     Cobra SZ Big Tour 3 / Shaft testing right now
    Utility     -     Callaway Xforged UT 21* & 24* / Mitsubishi MMT 125TX
    Irons      -      Honma 737V / Mitsubishi MMT 125TX
    Wedges -      Callaway MD5 50S, 54S, MD4 60C
    Putter    -      Odyssey Versa 6
    Ball        -      Srixon Zstar XV

    WITB & Content - 
    https://forums.golfwrx.com/discussion/1108083/j13s-witb-2020-irons-podcast-pics-added-pg-101/p1


    Instagram
    On -, @Jminis13





  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • LlortamaiseyLlortamaisey Members  6087WRX Points: 449Posts: 6,087 Titanium Tees
    Joined:  #23
    I've seen some guys roll this putter and I truly believe that these grooves will be the next tech outlawed by the USGA. It's a definite advantage.
    Posted:
  • driveandputtmachinedriveandputtmachine 4 wedges or 2 iron? That is the question! Members  1495WRX Points: 299Handicap: 0.0Posts: 1,495 Platinum Tees
    Joined:  #24
    I got my EVN ROLL a few months back, luckily I happened to see this thread and was able to have Guerin stay late for me to meet and be fitted for a putter. I ended up posting my own thread about the putters, me one of the guys that owned Sunset Beach Custom Putters ended up buying a putter from another manufacturer based on what I saw in my hour of time with Guerin.<br />
    <br />
    He is a great guy and I have exchanged quite a few emails with him. The reason he was here in Atlanta was to meet with the folks at Headquarters, train the staff at each store, and to fit a few customers for putters. I am not sure but I believe all of the PGA T SS have the EVN ROLL putters in them. The one in Roswell and the one in Kennesaw(Both on the north side of Atlanta) have sold out and ordered new product numerous times. From what I have gathered they have moved more of these putters than any other without some big giant advertisement or sale to push them.<br />
    <br />
    The technology flat works, I am not a guy that has ever putter well with a face balanced putter, so the fact that all of them have some degree of toe hang was refreshing. Guerin said(don't quote me here I can't remember his exact words) that he has never really thought truly face balanced putters were they way to go for the majority of the golfing public. While I do not have a swing to do an exact test, I have tried it indoors as well as on bermuda and bent grass greens(hitting the putter on the outside vs. center of the grooved section) and it worked as advertised. To back this up I have never been better with my distance control on long putts, so I assume it has to be working. Also, I believe the counter balancing of the head has helped my short putting as well.<br />
    <br />
    I would never recommend anyone buying something they cannot try, I mean drivers, fairways, irons, and wedges are all so different you may get completely screwed. I do however recommend anyone that is thinking of buying one of the other high end milled putters to find a way to try these. After watching the ball on the roll board and doing a comparison against non grooved putters I can see a big difference in the roll pattern. The grooves work, add it the effect of helping with distance control on off center hits, and the counter balance for short putts I personally do not think there is a better putter on the market.<br />
    <br />
    Until they get the website fixed from all of the traffic you can get more info here.......https://www.facebook.com/Evnroll/
    Posted:
    Driver - TM SIM on Chrome Elements
    Fairway - TM M5 on Project X HZRDOUS Yellow
    Irons - (4) Cobra Speed Zone on Project X Catalyst 100
    Irons - (5) Srixon 565 on Recoil 110
    Irons - (6) Srixon 565 on Recoil 110
    Irons (7-W) Srixon 765 on Recoil 110
    Wedges - Cleveland CB2 50* and 54*, Cleveland RTX 4 58* and 62* all on UST Recoil 110
    Putter - Mannkrafted MA/66 or Sunset Beach Ocean Isle on UST F FIlter or Taylormade Spider
    Ball - Srixon Z Star or Z Star XV
  • jbadgejbadge Members  21WRX Points: 0Posts: 21
    Joined:  #25
    Shi Guy wrote:
    <br />
    jbadge wrote:
    <br />
    Are these all face balanced design?<br />
    <br />
    <br />
    No, according to the PGA SS website they all have some degree of toe hang. The Mallets have 5* and the blades have 15*.<br />
    <br />
    <br />
    Good to know, thanks for the feedback.
    Posted:
  • Jimenaz1Jimenaz1 Members  103WRX Points: 36Handicap: 5.8Posts: 103 Fairways
    Joined:  #26
    The Enroll putters are now at the PGA superstore in Chandler AZ, probably Scottsdale. I took a few minutes to hit a few the ER5 since I have been looking at the Versa 7. I continue to be intrigued by the Evnroll and will <br />
    be going back to hit the ER2 also. from the few times I did hit the putter, he created a nice roll and had a nice feel/sound similar to the SC's out there now. Can't wait to find a minute to go hit a few more !!!
    Posted:
    [font=verdana,geneva,sans-serif]Titleist - 917 D2 9.5 Aldila Rogue Silver
    Titleist - 917d - Aldila Rogue Silver
    Titleist - 915h 2 hybrid - Diamana Blue
    Titleist - TM UDI 4 iron with GD S flex (black) [/font]

    [font=verdana, geneva, sans-serif]Titleist - [/font][font=verdana, geneva, sans-serif]714 AP2 5-9 KBS 110 tour V[/font]
    [font=verdana, geneva, sans-serif]Titleist - SM5/SM6 [/font][font=verdana,geneva,sans-serif] 46/52/56 KBS 110 tour[/font]
    [font=verdana,geneva,sans-serif]Callaway - PM Mack Daddy 60 KBS
    Scotty Cameron - Platinum[/font]

    [font=verdana, geneva, sans-serif]Titleist - Pro V1 or Kirkland Baby[/font]
    [font=verdana,geneva,sans-serif]Foot Joy/Nike DNA or Lunar 3 [/font]
    Nike or FJ Apparel
    Patrick Gibbons Belts
  • GeorgeHWBGeorgeHWB Members  2217WRX Points: 1,663Posts: 2,217 Platinum Tees
    Joined:  edited Sep 13, 2016 #27
    GoIrish17 wrote:
    <br />
    What's the story with these putters and the company? I really hadn't heard a thing about them until I got an email today from **** about "the best putter we've ever tested (game- changing technology)". Well, color me intrigued, but the **** review reads like a infomercial more than an unbiased review.<br />
    <br />
    <br />
    <br />
    I read that article and I call B.S. I generally like **** and have donated money to them before, but the article was crap. "The ball curves toward the hole." Nope, sorry, I don't buy putters that defy physics because that just tells me the source isn't credible. I expect **** to endorse the Overspin putter next. Talk about a credibility free fall.<br />
    <br />
    It makes me wonder if **** was paid for that "review."<br />
    <br />
    <br />
    Edit - Now that I think of it, Guerin Rife is on his 3rd putter company. Each one had so-called revolutionary technology. Yeah, that or a marketing champ pulling the levers.
    Posted:
  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • kobes31kobes31 EFF Members  811WRX Points: 94Posts: 811 Golden Tee
    Joined:  #28
    After reading through some threads on these putters I'd be really interested why the OP promptly sold his on the BST. I'd sure like to try the red mallet.
    Posted:
  • driveandputtmachinedriveandputtmachine 4 wedges or 2 iron? That is the question! Members  1495WRX Points: 299Handicap: 0.0Posts: 1,495 Platinum Tees
    Joined:  #29
    Lil Spanky wrote:
    <br />
    GoIrish17 wrote:
    <br />
    What's the story with these putters and the company? I really hadn't heard a thing about them until I got an email today from **** about "the best putter we've ever tested (game- changing technology)". Well, color me intrigued, but the **** review reads like a infomercial more than an unbiased review.<br />
    <br />
    <br />
    <br />
    I read that article and I call B.S. I generally like **** and have donated money to them before, but the article was crap. "The ball curves toward the hole." Nope, sorry, I don't buy putters that defy physics because that just tells me the source isn't credible. I expect **** to endorse the Overspin putter next. Talk about a credibility free fall.<br />
    <br />
    It makes me wonder if **** was paid for that "review."<br />
    <br />
    <br />
    Edit - Now that I think of it, Guerin Rife is on his 3rd putter company. Each one had so-called revolutionary technology. Yeah, that or a marketing champ pulling the levers.<br />
    <br />
    <br />
    I didn't see the ball curving towards the hole on mis-hits, I did notice that my mis-hits didn't seem to go as far offline(left or right of center), and I didn't notice a big distance discrepancy(mis-hits ending up way short) as I saw with other putters. <br />
    <br />
    Guerin pretty much invented groove technology in putters, so that was a Revolutionary technology. Almost every manufacturer has adopted some sort of groove technology or something similar. So I would say that is revolutionary. So he had Rife Putters(which started it all) then he had EVN ROLL, what company am I missing? Whether EVNROLL technology is revolutionary, I would say is up to the user. My distance control is better, making more short putts, and three putting less. My mid-range putting is close to the same or maybe a little better, but that was not ever a problem area for me.
    Posted:
    Driver - TM SIM on Chrome Elements
    Fairway - TM M5 on Project X HZRDOUS Yellow
    Irons - (4) Cobra Speed Zone on Project X Catalyst 100
    Irons - (5) Srixon 565 on Recoil 110
    Irons - (6) Srixon 565 on Recoil 110
    Irons (7-W) Srixon 765 on Recoil 110
    Wedges - Cleveland CB2 50* and 54*, Cleveland RTX 4 58* and 62* all on UST Recoil 110
    Putter - Mannkrafted MA/66 or Sunset Beach Ocean Isle on UST F FIlter or Taylormade Spider
    Ball - Srixon Z Star or Z Star XV
  • QuickFeetQuickFeet Members  1619WRX Points: 118Handicap: 2Posts: 1,619 Platinum Tees
    Joined:  #30
    I like my 2Bar mallet, and it's most likely going to be back in the bag shortly. I've not used anything better and have tried many different models over the years.<br />
    <br />
    I'll give Rife putters evolutionary status, not revolutionary. After all, it's still just a putter............it doesn't do anything different.
    Posted:
    TaylorMade M2 10.5o / Matrix White Tie 50X4 R
    Nike Vr Pro Ltd. 5W / UST VTS 7R Silver
    Callaway Apex 3/20o / UST Recoil 760 ES F3
    Callaway Apex 4/23o / UST Recoil 760 ES F3
    Nike Covert Forged 4-PW / UST Recoil 95 F3
    Nike Engage 58 DS / UST Rv2 Gold 115 R
    Nike SV Tour 54 / UST Rv2 Gold 115 R
    Nike Vr Forged 50 / UST Rv2 Gold 115 R
    Nike Origin B2-01
    Nike RZN Tour Black
49

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.