Flow neck putter insert to replace double bend?

 FirePro ·  
FireProFirePro Members  865WRX Points: 64Handicap: 6Posts: 865 Golden Tee
Joined:  in Putter Mods and Micro Putter Artisans #1
Hi everyone, not sure if this has been asked but does anyone make an adapter that I can change my double bend putter shaft to a flow neck?<br />
<br />
I have seen this but would rather a flow neck rather then the plumbers neck<br />
<br />
Posted:
Cobra FlyZ+ @ 8.5 deg w/Grafalloy (White) Blue X-Stiff tipped 3/4" @ 44.75"
Taylormade 2017 M1 set to 13 deg w/ RBZ TP Aldila RIP Alpha 70X Tipped 1" @ 42.5"
Titleist 909 F2 (18.5deg) UST AxivCore Tour Green 95X Tipped 1.5" @ 41.5"
Srixon Z U45 4 & 2 w/ Aldila RIP Alpha 105 X Hybrid shaft (4 @ 38.5", 2 @ 39.5")
Srixon Z745 (5-PW) w/ KBS $-Taper X 130 Black
Hand Crafted wedges from Kyoei Raw Forged Blanks
52deg w/ KBS $-Taper 130X PW Shaft
56deg w/ KBS $-Taper 130X PW Shaft
60deg w/ KBS $-Taper 130X 8i Shaft
Putter: Odyssey Havok
Tagged:
1

Comments

  • dbdorsdbdors Houston, Clear Lake areaClubWRX  2217WRX Points: 291Handicap: 15Posts: 2,217 ClubWRX
    Joined:  edited Aug 14, 2017 #2
    This is likely the closest you'll get to an adapter. <br />
    <br />
    https://www.hirekogo...er-adapter.html
    Posted:
    Post edited by Unknown User on

    Woods: Callaway Rogue Sub Zero 8*, Fujikura Ventus 6 S, TM M5, 13*, MC Diamana Thump 75 S
    Hybrids: TEE CBX 119 19*, 22*, Project X EvenFlow Blue Hybrid 85 6.0
    Irons: TM M6, 5-GW, Accra 80i
    Wedges: Cleveland CBX 55*, 60*, Accra 80i
    Putter: Evnroll ER 1.2 blacked out, KBS CT Tour, 355g, 33”, SS Mid-slim 2.0
    Ball: Maxfli Tour
    Bag/Cart: '20 Nike Air Hybrid/BagBoy Quad XL
    Accessories: SkyCaddie SX400/Nikon Coolshot Pro Stabilized
  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • AThompson_3AThompson_3 Members  1519WRX Points: 164Posts: 1,519 Platinum Tees
    Joined:  #3
    Don't most of the current mallets have stems instead of holes? Essentially rendering these useless?
    Posted:
    Driver: Callaway Mavrik SZ 9* Fujikura Atmos Tour Spec Black 6TX
    3 Wood: Callaway Mavrik SZ 15* EvenFlow Black 75 X
    DI: Callaway X-Forged UT 18*  Fujikura Atmos HB Tour Spec Black 9X
    Irons: Titleist T100 4-9 Nippon Modus3 130X
    Wedges: Vokey SM8 46F, 50F, 55S, 60M Project X 6.5
    Putter(s): Scotty Cameron Studio Stainless Newport 2, Odyssey White Hot Pro V-Line, Nike Method 001
    Ball: Bridgestone Tour Bx
    Bag: Vessel Players Stand 2.0 14 Way
  • xxioxxio Cebu, PhilippinesMembers  5840WRX Points: 291Posts: 5,840 Titanium Tees
    Joined:  #4
    I'm having a friend cast me one. The problem are:<br />
    <br />
    getting the flow just right for such a short neck.<br />
    trying to get it done in a sturdy material. He does most of his stuff in brass and bronze.<br />
    finally drilling the hole.
    Posted:
  • FireProFirePro Members  865WRX Points: 64Handicap: 6Posts: 865 Golden Tee
    Joined:  #5
    <br />
    Don't most of the current mallets have stems instead of holes? Essentially rendering these useless?<br />
    I plan on making a putter purchase in the near future, nothing a little drilling can't fix I guess, mine looks to be a hole though
    Posted:
    Cobra FlyZ+ @ 8.5 deg w/Grafalloy (White) Blue X-Stiff tipped 3/4" @ 44.75"
    Taylormade 2017 M1 set to 13 deg w/ RBZ TP Aldila RIP Alpha 70X Tipped 1" @ 42.5"
    Titleist 909 F2 (18.5deg) UST AxivCore Tour Green 95X Tipped 1.5" @ 41.5"
    Srixon Z U45 4 & 2 w/ Aldila RIP Alpha 105 X Hybrid shaft (4 @ 38.5", 2 @ 39.5")
    Srixon Z745 (5-PW) w/ KBS $-Taper X 130 Black
    Hand Crafted wedges from Kyoei Raw Forged Blanks
    52deg w/ KBS $-Taper 130X PW Shaft
    56deg w/ KBS $-Taper 130X PW Shaft
    60deg w/ KBS $-Taper 130X 8i Shaft
    Putter: Odyssey Havok
  • tonypaztonypaz Members  6WRX Points: 0Posts: 6
    Joined:  #6
    Currently working on making one myself. I am making one for my Ghost Spider S. Took my double bend shaft off and putting in a black straight shaft that I purchased. I am going to try both aluminum and metal ones that I picked up material from work. Going to make them on my mill and bend them up to work.
    Posted:
  • FireProFirePro Members  865WRX Points: 64Handicap: 6Posts: 865 Golden Tee
    Joined:  #7
    are you located in Canada by chance?
    Posted:
    Cobra FlyZ+ @ 8.5 deg w/Grafalloy (White) Blue X-Stiff tipped 3/4" @ 44.75"
    Taylormade 2017 M1 set to 13 deg w/ RBZ TP Aldila RIP Alpha 70X Tipped 1" @ 42.5"
    Titleist 909 F2 (18.5deg) UST AxivCore Tour Green 95X Tipped 1.5" @ 41.5"
    Srixon Z U45 4 & 2 w/ Aldila RIP Alpha 105 X Hybrid shaft (4 @ 38.5", 2 @ 39.5")
    Srixon Z745 (5-PW) w/ KBS $-Taper X 130 Black
    Hand Crafted wedges from Kyoei Raw Forged Blanks
    52deg w/ KBS $-Taper 130X PW Shaft
    56deg w/ KBS $-Taper 130X PW Shaft
    60deg w/ KBS $-Taper 130X 8i Shaft
    Putter: Odyssey Havok
  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • tonypaztonypaz Members  6WRX Points: 0Posts: 6
    Joined:  #8
    Nope located in Michigan.
    Posted:
  • xxioxxio Cebu, PhilippinesMembers  5840WRX Points: 291Posts: 5,840 Titanium Tees
    Joined:  #9
    I was just wondering, is it possible to order just converter necks from Dave Billings/Machine?
    Posted:
  • FireProFirePro Members  865WRX Points: 64Handicap: 6Posts: 865 Golden Tee
    Joined:  #10
    tonypaz wrote:
    <br />
    Nope located in Michigan.<br />
    ill be in Windsor tomorrow ha
    Posted:
    Cobra FlyZ+ @ 8.5 deg w/Grafalloy (White) Blue X-Stiff tipped 3/4" @ 44.75"
    Taylormade 2017 M1 set to 13 deg w/ RBZ TP Aldila RIP Alpha 70X Tipped 1" @ 42.5"
    Titleist 909 F2 (18.5deg) UST AxivCore Tour Green 95X Tipped 1.5" @ 41.5"
    Srixon Z U45 4 & 2 w/ Aldila RIP Alpha 105 X Hybrid shaft (4 @ 38.5", 2 @ 39.5")
    Srixon Z745 (5-PW) w/ KBS $-Taper X 130 Black
    Hand Crafted wedges from Kyoei Raw Forged Blanks
    52deg w/ KBS $-Taper 130X PW Shaft
    56deg w/ KBS $-Taper 130X PW Shaft
    60deg w/ KBS $-Taper 130X 8i Shaft
    Putter: Odyssey Havok
  • Nic1972Nic1972 Members  724WRX Points: 79Handicap: 10Posts: 724 Golden Tee
    Joined:  #11
    <br />
    Don't most of the current mallets have stems instead of holes? Essentially rendering these useless?<br />
    <br />
    I have a Scotty Cameron California Fastback and would like to get a slant or plumbers neck. Does anybody know if this can be done easily, i.e. is there a hole in the putter head where the shaft goes in (from what I a can see this should be the case), or is there a stem? Also, is there a company based in Europe able to do this? Thanks!
    Posted:
    Driver: Nike Covert Pro 2.0 / Mitsubishi Diamana S+ Ltd 60 S / Golf Pride MCC Align Black / White
    Mini-Driver: Callaway X2Hot 2-Deep / Aldila Tour Green ATX75 3.7 S / Golf Pride MCC Align Black / White
    3-Wood: Taylormade RBZ Stage 2 TP / Matrix Ozik Rul 80 S / Golf Pride MCC Align Black / White
    DI: Adams DHY Pro (18') / Mitsubishi Diamana D+ 82H S / Golf Pride MCC Align Black /White
    Hybrids: Titleist 585H (21°); Adams 9031 Pro (24°) / Mitsubishi Diamana D+ 82H S / Golf Pride MCC Align Black / White
    Irons: Mizuno MP H-5 (4 Iron); Mizuno MP 4 (5 - PW) / Mitsubishi OT-I 105 S / Golf Pride MCC Align Black / White
    Wedges: Vokey SM 7 (50F08, 54M08, 58L04) / Project X LZ 6.0 / Golf Pride MCC Align Black /White
    Putter: Yes Callie & Scotty Cameron California Fastback / UST Mamiya Frequency Filtered / Golf Pride Tour SNSR 104 Pistol
    Ball: Titleist Pro V1X
    Apparel: Nike
    Glove: Nike Tour Classic
    Shoes: Nike Lunar Command 2
    Bag: Nike
  • tonypaztonypaz Members  6WRX Points: 0Posts: 6
    Joined:  #12
    With my Ghost Spider S the bent shaft has as stud coming out of the shaft. There is no hole in it. I am modeling up an adapter that I will mill and turn up to epoxy over the stock stud and bend up and have a stud on it for the putter shaft to make it look like a slant neck.
    Posted:
  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • DREWZER300DREWZER300 Members  95WRX Points: 67Handicap: 2.9Posts: 95 Fairways
    Joined:  #13
    dbdors wrote:
    <br />
    This is likely the closest you'll get to an adapter. <br />
    <br />
    https://www.hirekogo...er-adapter.html<br />
    <br />
    <br />
    I used one of these on my Tyne. Had to grind quite a bit to get it to fit. After installing I took it to work with me and blasted the entire head with aluminum oxide to give it a uniform finish. Very happy with the final result.
    Posted:
    Taylormade SIM Ventus Black 7X
    Taylormade SIM 3W Ventus Black 8X
    Mizuno MP-20 HMB 2 Graphite Design AD-DI 95X
    Mizuno MP-20 MB 4-PW DG TI X100
    Cleveland RTX4 50/54/60 DG TI S400
    Odyssey Protype PT10
    Titleist ProV1
  • FireProFirePro Members  865WRX Points: 64Handicap: 6Posts: 865 Golden Tee
    Joined:  #14
    Ordered the Flow neck from Hireko site, lets see how this works out.
    Posted:
    Cobra FlyZ+ @ 8.5 deg w/Grafalloy (White) Blue X-Stiff tipped 3/4" @ 44.75"
    Taylormade 2017 M1 set to 13 deg w/ RBZ TP Aldila RIP Alpha 70X Tipped 1" @ 42.5"
    Titleist 909 F2 (18.5deg) UST AxivCore Tour Green 95X Tipped 1.5" @ 41.5"
    Srixon Z U45 4 & 2 w/ Aldila RIP Alpha 105 X Hybrid shaft (4 @ 38.5", 2 @ 39.5")
    Srixon Z745 (5-PW) w/ KBS $-Taper X 130 Black
    Hand Crafted wedges from Kyoei Raw Forged Blanks
    52deg w/ KBS $-Taper 130X PW Shaft
    56deg w/ KBS $-Taper 130X PW Shaft
    60deg w/ KBS $-Taper 130X 8i Shaft
    Putter: Odyssey Havok
  • JumboJackJumboJack Lakewood,CA.Members  866WRX Points: 89Handicap: 1.6Posts: 866 Golden Tee
    Joined:  #15
    DREWZER300 wrote:
    <br />
    dbdors wrote:
    <br />
    <br />
    I used one of these on my Tyne. Had to grind quite a bit to get it to fit. After installing I took it to work with me and blasted the entire head with aluminum oxide to give it a uniform finish. Very happy with the final result.<br />
    <br />
    <br />
    I was thinking of getting a Tyne and marking it a knucklehead. Is the shaft hole on the Tyne straight/perfectly vertical?
    Posted:
    TM M2 2017 10.5 Hzrdus Yellow 65 S
    Ping G400 14.5 PING Tour 80g S
    Ping Anser 17* 23* PING Tour  S
    PING iE1 5-PW Modus3 105 S
    PING Glide 2.0 50* 54* 60* Modus 115 Wedge S
    BioMech 41"
    NDMC Plus 4
    ProV1
  • fore_lifefore_life Swung too hard, hit it too pure. Members  10622WRX Points: 380Handicap: 40Posts: 10,622 Titanium Tees
    Joined:  #16
    Posted:
    Ping G400 LST Ust Attas Earth 9f5
    M4 15* with bimatrix rocket X
    Titleist 21* H2 evenflow blue 6.5
    718 tmb 4 iron
    718 cb 5-pw amt x100 tour
    Vokeys
    Cleveland TA milled 1i


    Various other putters currently in the closet,
    thinking about what they've done wrong,
    and how they've hurt me so.
  • semarlorsemarlor Charlotte, NCMembers  992WRX Points: 333Posts: 992 Golden Tee
    Joined:  #17
    fore_life wrote:
    <br />
    <br />
    Has anyone used one of these? He has them in aluminum, also, which won't add much weight. I thought about giving one a shot when I get my X7M redone in black. I am not looking to change toe hang or anything, purely for the look! Anyone have any experience to share?
    Posted:
  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • benno_rbenno_r Members  837WRX Points: 114Handicap: 11Posts: 837 Golden Tee
    Joined:  #18
    semarlor wrote:
    <br />
    fore_life wrote:
    <br />
    There are these too on eBay<br />
    <br />
    http://www.ebay.com/...WYAAOSw44BYMLm9<br />
    <br />
    <br />
    Has anyone used one of these? He has them in aluminum, also, which won't add much weight. I thought about giving one a shot when I get my X7M redone in black. I am not looking to change toe hang or anything, purely for the look! Anyone have any experience to share?<br />
    <br />
    <br />
    I talked to Chip at Black Lab about these, and they are designed to work on hosel bore holes that are 90deg.<br />
    <br />
    Way back I had Lajosi make the same for a Scotty Squareback. When he had it, he confirmed the Scotty bores are not 90deg. If you were to install this on your Scotty, the preset lie angle in the knuckle will be 5-6deg out.<br />
    <br />
    I can't comment on the X7M, but I would assume Scotty would use the same bore angle - as his propriety single bend shafts are designed to suit this.
    Posted:
    Cobra F9 - Accra CS1 60 M3
    Cobra Bio Cell 4w - Accra CS1 70 M3
    Mizuno JPX850 - Altus Hybrid
    Wilson c300 forged 4-GW - Paderson Kevlar Green 110
    GrindWorks 54/58
    Toulon - with Edel / Lajosi / Ping / Xenon / Odyssey / Black Lab on possible rotation
  • semarlorsemarlor Charlotte, NCMembers  992WRX Points: 333Posts: 992 Golden Tee
    Joined:  #19
    benno_r wrote:
    <br />
    semarlor wrote:
    <br />
    fore_life wrote:
    <br />
    <br />
    Has anyone used one of these? He has them in aluminum, also, which won't add much weight. I thought about giving one a shot when I get my X7M redone in black. I am not looking to change toe hang or anything, purely for the look! Anyone have any experience to share?<br />
    <br />
    <br />
    I talked to Chip at Black Lab about these, and they are designed to work on hosel bore holes that are 90deg.<br />
    <br />
    Way back I had Lajosi make the same for a Scotty Squareback. When he had it, he confirmed the Scotty bores are not 90deg. If you were to install this on your Scotty, the preset lie angle in the knuckle will be 5-6deg out.<br />
    <br />
    I can't comment on the X7M, but I would assume Scotty would use the same bore angle - as his propriety single bend shafts are designed to suit this.<br />
    <br />
    <br />
    Thanks for the reply! I sent a message through ebay and Chip answered that he didn't know specifically about the X7M and the tip size of the stock shaft. I have heard several times that Scotty uses proprietary shafts so that's why I had reservations about it working the way I pictured. I wasn't even considering the issue of the bore angle. Thanks again, I appreciate the help!
    Posted:
  • benno_rbenno_r Members  837WRX Points: 114Handicap: 11Posts: 837 Golden Tee
    Joined:  #20
    Not to say it can't be done though - it would just require some extra modding.<br />
    <br />
    I looked at the pic of an x7M. You could cut off the spud that takes the current shaft, then have someone drill in a 90deg hole in the current location to install the knuckle.<br />
    <br />
    You'd have to decide if that is worth the effort though.
    Posted:
    Cobra F9 - Accra CS1 60 M3
    Cobra Bio Cell 4w - Accra CS1 70 M3
    Mizuno JPX850 - Altus Hybrid
    Wilson c300 forged 4-GW - Paderson Kevlar Green 110
    GrindWorks 54/58
    Toulon - with Edel / Lajosi / Ping / Xenon / Odyssey / Black Lab on possible rotation
  • semarlorsemarlor Charlotte, NCMembers  992WRX Points: 333Posts: 992 Golden Tee
    Joined:  #21
    Yeah, that's a little more involved than I want to get. I originally liked the idea of it being "plug and play," so to speak.
    Posted:
  • fore_lifefore_life Swung too hard, hit it too pure. Members  10622WRX Points: 380Handicap: 40Posts: 10,622 Titanium Tees
    Joined:  #22
    Any updates?
    Posted:
    Ping G400 LST Ust Attas Earth 9f5
    M4 15* with bimatrix rocket X
    Titleist 21* H2 evenflow blue 6.5
    718 tmb 4 iron
    718 cb 5-pw amt x100 tour
    Vokeys
    Cleveland TA milled 1i


    Various other putters currently in the closet,
    thinking about what they've done wrong,
    and how they've hurt me so.
  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • Rig14PortRig14Port Members  945WRX Points: 267Handicap: +18Posts: 945 Golden Tee
    Joined:  #23
    working ona project with Spry Evo for an "over the stub flow neck adapter" for odyssey double bend putters. They already produce a bored hosel flow neck adapter here: https://www.shapeways.com/product/PJ6CKQ92Y/hosel-edel-00-66-1-4?optionId=68809451
    Posted:
    Cally Mavrik SZ 9.0* HZRDUS Smoke Black 70X
    Cally Mavrik SZ 15* HZRDUS Smoke Black 80X
    Titleist U500 2 HZRDUS Smoke Black 90X
    Mizuno JPX 919 Tour 4-PW DG 120 X100
    Cleveland RTX 4 50*, 54*, 58* DG 120 X100
    TM Spider Mini Copper
  • whitembwhitemb Members  279WRX Points: 75Handicap: 4.6Posts: 279 Greens
    Joined:  #24
    Rig14Port wrote:
    <br />
    working ona project with Spry Evo for an "over the stub flow neck adapter" for odyssey double bend putters. They already produce a bored hosel flow neck adapter here: https://www.shapeway...tionId=68809451<br />
    <br />
    <br />
    That is really cool.
    Posted:
  • JagpilotohioJagpilotohio 45+ inch drivers are evil. Columbus, OHMembers  7281WRX Points: 588Handicap: 1.8Posts: 7,281 Titanium Tees
    Joined:  edited Oct 5, 2018 #25
    tonypaz wrote:
    <br />
    Currently working on making one myself. I am making one for my Ghost Spider S. Took my double bend shaft off and putting in a black straight shaft that I purchased. I am going to try both aluminum and metal ones that I picked up material from work. Going to make them on my mill and bend them up to work.<br />
    <br />
    <br />
    TM actually made a Ghost spider S flow neck, or “slant neck”.. I have two of them. Best putter I’ve ever used. <br />
    <br />
    Find a used one on the Bay. Will save a lot of work.<br />
    <br />
    https://www.google.com/search?q=ghost+spider+s+slant&prmd=sinv&source=lnms&tbm=isch&sa=X&ved=0ahUKEwib_r_lv-_dAhVk_4MKHWbFA6QQ_AUIEigC&biw=1024&bih=627#imgrc=sIbWJNUNklEg_M<br />
    <br />
    <br />
    Edit....didn’t realize I’m responding to a year old post....Oops.
    Posted:
    9.5* Cobra LTD, Old school Grafalloy Blue, 43.5"
    14* Cally 815 alpha fuji 665 X 42"
    16* Cally 815 alpha fuji 665 X, 41.5" (set to 17*)
    19* Titleist 816 H2 fuji 8.8X TS 40.0"
    4-7 2016 Hogan PTx, KBS Tour V, 120X.  
    PXG gen 1 tours 8 & 9 Proto 125 F5 hardstepped 1x.
    Ping glide 2 46-12, 50-12, 54-14 (at 55) stealth, Vokey SM6 60M (61). Wedges Recoil Proto 125 F5
    33.5" Ghost spider slant neck.
    Srixon Z-star XV
    Jones Trouper Bag
  • sqaushman67sqaushman67 Members  24WRX Points: 47Posts: 24 Bunkers
    Joined:  #26
    go to p j putters <br />
    www.theputtrroom.com
    Posted:
  • b81smithb81smith ClubWRX  782WRX Points: 119Posts: 782 Golden Tee
    Joined:  #27

    https://www.hirekogolf.com/slant-hosel-putter-adapter-h002.html

    https://www.shapeways.com/product/PJ6CKQ92Y/hosel-edel-00-66-1-4?optionId=68809454

    and PJ putters - all looked good aside from PJ putters seeming to be in the UK.

    I have a putter with a double bend shaft and want to convert it to flow neck but no way am I willing to drop like 180 for that to happen LOL at that price you could get a whole new putter with a different neck. The model I have isn't available in slant/flow neck but those necks fit me best I recently learned in a fitting. Wonder if either the edel or hireko golf ones would work out. I'd be willing to perform work but drilling holes in the darn thing would make me uneasy. I've emailed the company Evnroll to see if their ER5 has a stem or hole and if they recommended anyone to make this conversion. I'd be willing to spend 100 but nothing more than that and would much rather a simple glue in option in case it doesn't work out I haven't ruined a putter worth decent money. I'd love to see any updates or pictures people have about the work spoken about above.

    Posted:

    Ben S
    Hailing from N Aurora IL

    WITB:
    Putter:
    Mizuno by Bettinardi BC1 w/SuperStroke MidSlim 2.0 Flamed finish (1 Degree)
    Driver:
    Ping G – Mitsubishi Diamana Blue 73 X (10.5 Degree)
    3 Wood: Callaway Epic Flash – Mitsubishi Tensei AV Blue 75 S (15.5 Degree)
    3 Hybrid:
    Tour Edge CBX 119 – Project X EvenFlow Black 85 S (18 Degree)
    3 Hybrid:
    Ping G – Mitsubishi Tensei CK Pro Blue HY 86 S (19 Degree)
    4 – GW:
    Ping i210 - Oban CT-115 X (22.5 - 50 Degrees)
    SW:
    Titleist SM7 S Grind - Tour Chrome - Stock S200 (54 Degree)
    LW:
    Titleist SM7 D Grind - Tour Chrome - Stock S200 (58 Degree)
    All Grips: 
    Winn Dri-Tec Midsize - Gray/Blue w/ 2 extra wraps low hand
    Customizing:
    Lime Green/Hot Pink Custom Paintfill - all clubs
    White ferrules with Blue Stripes from Cell-Parts.net
    Irons fitted & built by True Spec Golf
    Custom Headcovers from Sunfish Golf
    PING White DLX Cart Bag

  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • b81smithb81smith ClubWRX  782WRX Points: 119Posts: 782 Golden Tee
    Joined:  #28
    Posted:

    Ben S
    Hailing from N Aurora IL

    WITB:
    Putter:
    Mizuno by Bettinardi BC1 w/SuperStroke MidSlim 2.0 Flamed finish (1 Degree)
    Driver:
    Ping G – Mitsubishi Diamana Blue 73 X (10.5 Degree)
    3 Wood: Callaway Epic Flash – Mitsubishi Tensei AV Blue 75 S (15.5 Degree)
    3 Hybrid:
    Tour Edge CBX 119 – Project X EvenFlow Black 85 S (18 Degree)
    3 Hybrid:
    Ping G – Mitsubishi Tensei CK Pro Blue HY 86 S (19 Degree)
    4 – GW:
    Ping i210 - Oban CT-115 X (22.5 - 50 Degrees)
    SW:
    Titleist SM7 S Grind - Tour Chrome - Stock S200 (54 Degree)
    LW:
    Titleist SM7 D Grind - Tour Chrome - Stock S200 (58 Degree)
    All Grips: 
    Winn Dri-Tec Midsize - Gray/Blue w/ 2 extra wraps low hand
    Customizing:
    Lime Green/Hot Pink Custom Paintfill - all clubs
    White ferrules with Blue Stripes from Cell-Parts.net
    Irons fitted & built by True Spec Golf
    Custom Headcovers from Sunfish Golf
    PING White DLX Cart Bag

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.