Muscle Back "Blade" Irons --- History and Future?

1246721

Comments

  • rainkingjrrainkingjr Members Posts: 2,621 ✭✭
    BiggErn wrote:

    rainkingjr wrote:
    I don't currently play MB's ,but have shot my lowest rounds using them. The blade/CB debate gets old. The main reason I have ever played MB's and probably will again is be cause I just like them. Simple as that.






    But what was your lowest rounds?




    Not really sure why it would matter as lower is lower no matter what the score, but if you must know, I've had several rounds in the mid 70's using blades. 74 being the lowest to date.
  • baloobaloo A Person Members Posts: 1,084 ✭✭
    Blades are awesome, love mine. Not a big deal if they aren't marketed.
    Driver, 3W, 4W - Macgregor Custom Tourney
    2-10 - 1954 Spalding Synchro Dyned
    SW - Wilson Staff
    Putter - Bullseye
    Ball - Pro Plus

    YT Channel - https://www.youtube....PlayVintageGolf
  • mahoniemahonie Members Posts: 2,444 ✭✭
    chisag wrote:

    HiSpeed48 wrote:

    chisag wrote:

    HiSpeed48 wrote:


    Another thread derailed into a Blades vs GI debate by the anti-blade crusaders




    ... The sound of one hand clapping. It takes two to tango. Only the zealots do not see this is equally divided among both camps.




    It was a thread about blades



    Please point out a CB or GI thread that was derailed by blade-users




    ... I am neutral in this debate. Both sides post what is basically personal opinions yet somehow think that their experience, would be everyone else's experience. As someone that taught full time, one of the silliest things I see posted is MB's will make you a better ball striker and practicing with an MB will do the same. This is simply personal experience from someone with a weak mind and poor discipline. You should practice with what you are playing. But hey, if practicing with an MB or playing with an MB makes you a better ball striker? Good for you, but that is you and you only and that advice does not apply to most golfers. I have seen this sentiment on more than a few CB threads. Pitchers do not throw baseballs with smaller seams so they are more productive with their curveball when they use normal seams. Shooting guards do not use bigger basketballs to fine tune their ability to put it the the center of the rim. The practice with what they play.



    ... Equally as silly is telling someone else that a CB would be much better for their game, and if they are playing MB's they are delusional. There are quite obviously many advantages to playing MB's if you have the skill to make them work for your swing. If not, the best players in the world would not be using them. Speith won the Open Championship using AP2's and Molinari won using P750's and Stenson won using what are very close to SGI irons on a course where controlling your flight and distance is paramount. Of course I can give the same example with Rory and Tiger that won using MB's. I am of the belief that confidence trumps technical performance every time. If you honestly think you hit MB's better, you probably will. If you honestly think you hit CB's better, you probably will.




    Your comment about confidence trumping technical performance is spot on. I came into our club championships 2 weeks ago with a bit of good form behind me and promptly shot 93/91. I read Bob Rotella’s book ‘Your 15th Club’ during the following days and played last weekend without any intervening practice - I just read the book. I shot 76 with the exact same equipment on the exact same course in pretty much the same conditions. 17 shots difference just because I read a book!! To be honest I didn’t strike the ball very well (5/14 fairways, 5/18 GIR) but the book changed my mindset and I was confident of getting the ball in the hole. FWIW, if I take 8-iron chip shots out, I only hit my irons 21 times.



    Callaway Big Bertha Alpha Fubuki ZT Stiff
    MD Golf Superstrong 3-wood UST Proforce 65 Stiff
    Wilson Staff FG Tour M3 21* Hybrid Aldila RIP Stiff
    Mizuno MP4 4-PW DG S300
    Wilson Staff PMP wedges 50/54/58 KBS Hi-Rev 2.0
    Radius Classic 8
  • Kenny Lee PuckettKenny Lee Puckett Members Posts: 3,460 ✭✭
    honestly it's amazing muscle back blades are still here isn't it?



    considering woods went from this...

    dw-after.png

    to this....

    pittsburgh-persimmon-608-1.jpg

    to this....

    1001031.jpg
    [font=tahoma,geneva,sans-serif]PING G LST: Ping Tour 80
    PING Anser 4wd: Accra S380 RT
    PXG 0317: Fujikura Rombax 8D07HB
    PING i500 4 iron: D.G. 120
    PING S55 5-PW: D.G. Tour Issue
    PING Glide 2.0 50/54/58: D.G. Tour Issue
    PING Darby F Ti Pixel: SS 2.0 Mid
    PING: Sensor Glove, Ping 703 Cord grips
    PING: Hoofer Bag
    TaylorMade: TP5 & TP5x ball

    WITB photos: [/font]
    http://www.golfwrx.c...uckett-witb-19/
  • HiSpeed48HiSpeed48 Members Posts: 2,109 ✭✭

    HiSpeed48 wrote:


    It was a thread about blades



    Please point out a CB or GI thread that was derailed by blade-users




    No, it was a thread asking what the forum thought about the future of blades.



    And the answer is pretty clear - its dismal, given current retail outlets and market share, especially compared to what once was.



    Nobody makes threads about the outlook of GI irons because its obvious.



    The thread wasn't "de-railed", you guys didn't get the answer you wanted. Blades are fine. Nobody cares what you play. But if you ask any group of reasonably plugged-in golfers about the future of blades you'll get the same answer. Most of the time you find them at yard sales next to Ataris and VHS machines.
    Titleist 910D2 9.5* Tour Issue
    TEE XCG7 15*
    Srixon Z545 4-PW
    Vokey SM6 46* 50* 54* 58*
    John Byron DaleHead 2
  • Kenny Lee PuckettKenny Lee Puckett Members Posts: 3,460 ✭✭
    edited Jul 23, 2018 #97
    to this....



    0e607eb38bb2f94ea9a3500afd9b9244.jpg

    to this....

    r7quadL.jpg

    to this....

    Callaway_EPIC_caitzv.jpg





    edit: with all that advancement who on any Tour would still be back playing the original wooden stuff?
    [font=tahoma,geneva,sans-serif]PING G LST: Ping Tour 80
    PING Anser 4wd: Accra S380 RT
    PXG 0317: Fujikura Rombax 8D07HB
    PING i500 4 iron: D.G. 120
    PING S55 5-PW: D.G. Tour Issue
    PING Glide 2.0 50/54/58: D.G. Tour Issue
    PING Darby F Ti Pixel: SS 2.0 Mid
    PING: Sensor Glove, Ping 703 Cord grips
    PING: Hoofer Bag
    TaylorMade: TP5 & TP5x ball

    WITB photos: [/font]
    http://www.golfwrx.c...uckett-witb-19/
  • NRJyzrNRJyzr Allez Allez Allez Minnesota, USAMembers Posts: 6,414 ✭✭


    to this....



    0e607eb38bb2f94ea9a3500afd9b9244.jpg

    to this....

    r7quadL.jpg

    to this....

    Callaway_EPIC_caitzv.jpg





    edit: with all that advancement who on any Tour would still be back playing the original wooden stuff?






    Bob Estes did it in the early 21st Century, even having a club made for him by Louisville Golf.



    image/pimp.gif' class='bbc_emoticon' alt=':pimp:' />
    The Ever Changing Bag!

    Driver: Cobra King LTD, ProtoPype 80x or RIP 80x, 43.5" -or- SuperDeep 9.5*, ProtoPype 80x or NV85x, 43.5"
    3w: Cobra King LTD, Motore F1 85 X, 42.5"
    2h:  TM Stage 2 Tour, Nv105 stiff -or- 1 iron: Maxfli Revolution, DGS400
    2-PW, Golden Ram Tour Grind, Dynamic S
    SW: Ram Tour Grind Feel Matched 58*, DGS
    Putter: Snake Eyes Viper Tour Sv1, 34.5", PP58 midsize grip
    (Cleveland Huntington Beach #1 35" -or- Mizuno TPM-2, 35" as backups)
    Balls: in no particular order... Wilson Staff FG Tour, Duo Urethane, or 50 Elite, Srixon ZStar/ZStar XV, Snell MTB Black... will trot out Maxfli HT-100 or Elite 90 from time to time
    Shoes by True Linkswear
  • PALS-SSAPALS-SSA Members Posts: 281 ✭✭
    There is $$ in distance, which is why driver tech advances. It is now spreading to fairways and hybrids, and even the new trampoline faced irons.



    But most people value precision over distance in their iron shots and wedges, which is why forging really hasn't progressed beyond CB irons.



    Personally, I'd be happy with a set of zero offset blades or CBs. Too bad, everyone wants to ruin good forgings with too much offset.
  • buzlinbuzlin NorCalMembers Posts: 978 ✭✭


    to this....



    0e607eb38bb2f94ea9a3500afd9b9244.jpg

    to this....

    r7quadL.jpg

    to this....

    Callaway_EPIC_caitzv.jpg





    edit: with all that advancement who on any Tour would still be back playing the original wooden stuff?


    This comparison doesn't work for irons. 100% of Tour pros use 440+cc titanium drivers because they are without question superior for driving the ball. 100% use bladed wedges, because they're clearly superior for distance and trajectory control. Type of iron? Not definitive for ALL golfers. Mallet style putters? They're easier to line up and more forgiving right? So why don't ALL touring pros use them. Some technology is clearing superior, others not so much. Irons, especially short and mid irons are user specific.
    G400 LST, Tour 75 stiff
    915F 15, Rogue Black stiff
    913H, 19, 21, Tour Green stiff
    Miura CB57 4/5-pw KBS Tour stiff (or Tourstage 909 4/5-pw)
    Vokey, SM6, 50F, 54S, 58M
    Never Compromise Portofino
  • BiggErnBiggErn Members Posts: 2,437 ✭✭
    buzlin wrote:


    to this....



    0e607eb38bb2f94ea9a3500afd9b9244.jpg

    to this....

    r7quadL.jpg

    to this....

    Callaway_EPIC_caitzv.jpg





    edit: with all that advancement who on any Tour would still be back playing the original wooden stuff?


    This comparison doesn't work for irons. 100% of Tour pros use 440+cc titanium drivers because they are without question superior for driving the ball. 100% use bladed wedges, because they're clearly superior for distance and trajectory control. Type of iron? Not definitive for ALL golfers. Mallet style putters? They're easier to line up and more forgiving right? So why don't ALL touring pros use them. Some technology is clearing superior, others not so much. Irons, especially short and mid irons are user specific.




    You just called out a comparison that didn’t make sense while making one right after.
  • Kenny Lee PuckettKenny Lee Puckett Members Posts: 3,460 ✭✭
    tenor.png
    [font=tahoma,geneva,sans-serif]PING G LST: Ping Tour 80
    PING Anser 4wd: Accra S380 RT
    PXG 0317: Fujikura Rombax 8D07HB
    PING i500 4 iron: D.G. 120
    PING S55 5-PW: D.G. Tour Issue
    PING Glide 2.0 50/54/58: D.G. Tour Issue
    PING Darby F Ti Pixel: SS 2.0 Mid
    PING: Sensor Glove, Ping 703 Cord grips
    PING: Hoofer Bag
    TaylorMade: TP5 & TP5x ball

    WITB photos: [/font]
    http://www.golfwrx.c...uckett-witb-19/
  • gbartkogbartko Whooooo! Members Posts: 663 ✭✭
    edited Jul 23, 2018 #103
    HiSpeed48 wrote:


    Another thread derailed into a Blades vs GI debate by the anti-blade crusaders




    is becoming super sensitive and unable/unwilling to hear other opinions/critiques a side effect of playing blades?



    because if it is, i may just have to put my cobra king mb 4-G up on the BST.

    Ping Rapture 12.5
    TEE CB4 Tour 16.5
    Callaway x2Hot Pro 20/23
    Ping i E1 5-U
    Ping Glide ES 54.5/60
    Ping iN Half Wack-e
    Titleist DT TruSoft

  • HiSpeed48HiSpeed48 Members Posts: 2,109 ✭✭
    gbartko wrote:

    HiSpeed48 wrote:


    Another thread derailed into a Blades vs GI debate by the anti-blade crusaders




    is becoming super sensitive and unable/unwilling to hear other opinions/critiques a side effect of playing blades?



    because if it is, i may just have to put my cobra king mb 4-G up on the BST.




    You haven't posted a single meaningful opinion in this entire thread. If I'm wrong, please point it out.



    Those are great irons, I'd hold onto them.
    Titleist 910D2 9.5* Tour Issue
    TEE XCG7 15*
    Srixon Z545 4-PW
    Vokey SM6 46* 50* 54* 58*
    John Byron DaleHead 2
  • gbartkogbartko Whooooo! Members Posts: 663 ✭✭
    HiSpeed48 wrote:

    gbartko wrote:

    HiSpeed48 wrote:


    Another thread derailed into a Blades vs GI debate by the anti-blade crusaders




    is becoming super sensitive and unable/unwilling to hear other opinions/critiques a side effect of playing blades?



    because if it is, i may just have to put my cobra king mb 4-G up on the BST.




    You haven't posted a single meaningful opinion in this entire thread. If I'm wrong, please point it out.



    Those are great irons, I'd hold onto them.




    I’m not one to offer meaningful opinion to people who don’t operate on logic and reason.



    What’s left to say that hasn’t already been said? My opinion is irrelevant because it’s just that: opinion.

    Ping Rapture 12.5
    TEE CB4 Tour 16.5
    Callaway x2Hot Pro 20/23
    Ping i E1 5-U
    Ping Glide ES 54.5/60
    Ping iN Half Wack-e
    Titleist DT TruSoft

  • PepperturboPepperturbo Midwest and SouthwestMembers Posts: 15,671 ✭✭
    Sure is amusing when some people that play a particular type of club can't stop comparing and justifying their choice to a different kind of club. Anecdotal or research, NOBODY in their right mind buys clubs based on marketing hype alone. When it comes to laying down cash, their personal experience with that clubhead is what buys the club. So, stop throwing out anecdotal as if it doesn't have merit. It does but not with someone's preconceived bias.



    I know plenty of beginners and intermediate people purchase clubs based on how forgiving the club is for their skill level. We can call that anecdotal. Changing to blades often comes when someone realizes their game goal is different than before, and maybe an acquaintance has had substantial success with MB / blades. After playing Pings for eight months, a relative that was quite successful with MB / blades suggested I consider them after he heard my goal. So I switched to Mizuno blades. Would I advise people I encounter on that choice, no?



    For specific reasons muscle back blades will be around for a long time past when I am gone, as they should. Do those of us that enjoy blades care about your choice, NO? Will we think less of you, NO, not unless you become a raving azz because of your choice and or insecurities? You shouldn't care about our choice in clubs either unless your goals appear aligned with our goals and what we've chosen is of interest. I am in my late 60's and still intermittently enjoy my 670MB's and MacGregor Butterknives when my ball striking gets stinky. image/beach.gif' class='bbc_emoticon' alt=':beach:' /> image/laugh.png' class='bbc_emoticon' alt=':lol:' />
    • Titleist TS2 9.5, Fujikura Fuel Tour Spec 60 "S"
    • Titleist 917D2 15*, Project X7C3 Tour Issue
    • Titleist 716T-MB 17* 2 iron, Project X 5.5
    • Titleist 716CB 3i-PW, Project X 5.5
    • SM6 F-52*, Project X 5.5
    • SM6 M-58*, DG-S200
    • SC California Monterey
    • AVX or ProV1




  • SixSixGolfSixSixGolf Members Posts: 390 ✭✭
    1Mordrid1 wrote:


    As for the lack of consistent distance control in GI irons, that is a myth that has been busted many times.




    Lol where? I'll wait.
  • BiggErnBiggErn Members Posts: 2,437 ✭✭
    Here are some of my favorites:



    “I play x club so I can keep it low punching out from under limbs”



    “I play x club so when I hit it 30 yards off line it doesn’t go as far into trouble”



    “I play x club because forgiveness is a myth”



    “I play x club because I don’t shoot any worse with one vs the other”



  • NRJyzrNRJyzr Allez Allez Allez Minnesota, USAMembers Posts: 6,414 ✭✭
    Keep storming the castle....
    The Ever Changing Bag!

    Driver: Cobra King LTD, ProtoPype 80x or RIP 80x, 43.5" -or- SuperDeep 9.5*, ProtoPype 80x or NV85x, 43.5"
    3w: Cobra King LTD, Motore F1 85 X, 42.5"
    2h:  TM Stage 2 Tour, Nv105 stiff -or- 1 iron: Maxfli Revolution, DGS400
    2-PW, Golden Ram Tour Grind, Dynamic S
    SW: Ram Tour Grind Feel Matched 58*, DGS
    Putter: Snake Eyes Viper Tour Sv1, 34.5", PP58 midsize grip
    (Cleveland Huntington Beach #1 35" -or- Mizuno TPM-2, 35" as backups)
    Balls: in no particular order... Wilson Staff FG Tour, Duo Urethane, or 50 Elite, Srixon ZStar/ZStar XV, Snell MTB Black... will trot out Maxfli HT-100 or Elite 90 from time to time
    Shoes by True Linkswear
  • gdb99gdb99 Members Posts: 1,651 ✭✭
    I keep playing the same **** irons so I don’t have to learn what new clubs will do.

    How sad is that?!
    Cobra King LTD, Diamana Redboard stiff flex
    Titleist 917F 16.5, Diamana Tensei Blue regular flex
    Cleveland DST 3 hybrid, Diamana Redboard regular flex 
    Titleist AP1, 5-PW, Dynalite XP R300
    Vokey SM7 52F
    Vokey SM7 56M
    Cleveland 588RTG 60
    Odyssey #2
  • PepperturboPepperturbo Midwest and SouthwestMembers Posts: 15,671 ✭✭
    edited Jul 24, 2018 #111
    gdb99 wrote:


    I keep playing the same **** irons so I don’t have to learn what new clubs will do.

    How sad is that?!




    Not sad at all. You must trust and feel comfortable with your clubs, and you're not alone. Lots of decent amateurs don't like to change irons, I am one.



    I've been around long enough to know just because its new or pricy doesn't necessarily mean its better. Lots of time, all that changes is cosmetics. Besides, in defense of OEM's, every year it's difficult to find something that surpasses or revolutionizes certain game aspects. image/smile.png' class='bbc_emoticon' alt=':)' /> image/beach.gif' class='bbc_emoticon' alt=':beach:' />
    Post edited by Unknown User on
    • Titleist TS2 9.5, Fujikura Fuel Tour Spec 60 "S"
    • Titleist 917D2 15*, Project X7C3 Tour Issue
    • Titleist 716T-MB 17* 2 iron, Project X 5.5
    • Titleist 716CB 3i-PW, Project X 5.5
    • SM6 F-52*, Project X 5.5
    • SM6 M-58*, DG-S200
    • SC California Monterey
    • AVX or ProV1




  • mshillsmshills T-I-G-E-R-S! Fight Tigers, fight dammit, FIGHT FIGHT! Members Posts: 3,853 ✭✭
    MelloYello wrote:


    I do think this is one of the few really sad elements of GolfWRX.



    The fact a few trolls come into these threads ruins it for the rest of us.



    Sadly, I don't think there's anything to be done about it. It's just ironic considering how many folks actually hit MBs around here.




    You seriously do not think the OP was a troll post? Really?
    Callaway Big Bertha Alpha 8 deg
    TEE E8 Beta 16.5 deg
    Callaway Big Bertha V Series Heavenwood
    TEE CB Pro 3h 21 deg
    Titleist 735.CM 4-PW, S300
    Titleist Vokey 54.14, 58.08
    Dave Curry Big Oak custom center shaft
    Custom Eliott carry bag, waxed canvas and leather
  • BuzzkillBuzzkill Marshals Posts: 6,822 mod
  • 1Mordrid11Mordrid1 Members Posts: 590 ✭✭
    SixSixGolf wrote:

    1Mordrid1 wrote:


    As for the lack of consistent distance control in GI irons, that is a myth that has been busted many times.




    Lol where? I'll wait.




    As the line in my reply that you did not quote said, if GI irons truly had hot spots that could create 15 yard bursts they would never pass USGA conforming tests.



    Those mythical "no reason fairway jumpers" are simply just less than stellar strikes that reduce the spin on the ball, therefor increasing distance. It is an example of the difference in the performance of center mass vs perimeter weighting.



    If I hit my Titleist 690mb's out on the toe I will come up short pretty much every time. Sometimes just a few yards short but sometimes by as much as 15-20 yards. In the same regard, if I hit my Steelheads or G700's out on the toe, sometimes I still get "normal" distance, but sometimes I get a low spin knuckle ball that carries 10 yards further than normal and rolls out further than normal. Technically that is what a jumper is, but I also know that the reason for the "jumper" was the strike, not some magical hot spot on the iron. Also in all fairness, occasionally a bad toe strike on my GI irons will still come up short, but only by a few yards. Either way, any of those misses was caused my a less than perfect strike. Maybe for some people the Blade vs Game Improvement debate really just comes down to, "when I do make a mistake would I rather come up short or long?".



    As for the future of blades, they are not going anywhere, but I don't think they will ever be a dominant force in the market again. Personally I love the look and feel of blades, and if I had a more consistent short game I would probably still be playing them. I choose to play game improvement irons because I feel I can manage my misses better with them.
    WITB

    Callaway Rogue driver w/ Oban Tour Limited 4 60g
    Callaway Rogue 4 wood w/ Oban Kiyoshi White 4 65g
    Nike Sasquatch Sumo #4 hybrid(cut down 1") w/ H Diamana s
    Srixon U65 20° Miyazaki Kaula 7 s
    Ping G700 5-UW AWT 2.0(1°flat, 2° weak)
    Callaway Mack Daddy PM Grind 19 54/ KBS Hi-Rev 2.0 115
    Callaway Mack Daddy PM Grind 19 60/KBS Hi-Rev 2.0 115
    Ping Sigma 2 Tyne (adjusted to 32")
    Snell MTB Black
  • Titleist-GolferTitleist-Golfer I'd rather be driving a Titleist Members Posts: 3,094 ✭✭
    mshills wrote:

    MelloYello wrote:


    I do think this is one of the few really sad elements of GolfWRX.



    The fact a few trolls come into these threads ruins it for the rest of us.



    Sadly, I don't think there's anything to be done about it. It's just ironic considering how many folks actually hit MBs around here.




    You seriously do not think the OP was a troll post? Really?




    I seriously do not
    [font=tahoma,geneva,sans-serif]Go Navy!

    WITB
    Titleist 915 D4 8.5 Oban V430 6.5 75g
    Titleist 915 F2 15 Rogue Silver 80S
    Titleist VG3 18.5 JDM PX 6.0
    Titleist 714MB 3-PW DG S300
    Titleist TVD raw C-C 53 and Indigo SM5 58 DGTI
    Scotty Cameron Studio Stainless Newport Beach 340g 35"
    Titleist ProV1 2018[/font]
  • JustinFL83JustinFL83 Members Posts: 199
    edited Jul 23, 2018 #116
    To try and steer back to the original topic, I think that the future of blades will be refinements on the T-MB, P790, I500, PXG concepts. Doing things like multi-material construction in order to improve head stability and/or increase the size effective "sweet spot" by 1mm-2mm. I would be curious to see if any of the manufacturers have tried utilizing layering different metals (say carbon steel with aluminum) then hitting them with the forge to allow them to reallocate weight to different areas. When it comes to a fundamental blade and trying to push it's boundaries, I think Mizuno has come up with some cool concepts with the MP-32 and MP-5 lines. I would be interested to see what could come out of them revisiting and improving on concepts like the cut muscle design. The biggest thing holding it back, as many have pointed out, is the market share size as it is a very niche genre. Why allocate 10 million to experiment and refine if you'll likely never recoup that money unless you end up with lightning in a bottle.



    The type of golfers that play blades are not your "standard" golfer. It's not so much of a skill level dependent as the desire for the physical properties like trajectory and distance windows, look at address, and shot feedback. Even then, they are not for everyone especially with how the "players CB" has evolved. 90%-ish of golfers do not care about the physical attributes of blades because their wants do not match up. They want the forgiveness, height, and distance in addition to confidence a larger club head provides. None of which are offered with blades. Blade cool factor quickly goes away when your buddy is hitting a 150 yard PW to your 8 or 9 iron and only if you hit it flush. Workability is an over-used catch word with blades, just watch TXG's video on it. A good player who understands the cause and effect in his swing can move the ball as he needs with the only difference perhaps being the exaggeration of the action required to pull off the shot.



    While I think it could be interesting to see where things could go with blades given the resources (we're starting to see it with PXG driving the train), I don't think the "true" solid forged blade is going to advance much past it's current point given the market.
    Driver - Titleist 917D2 8.5
    3 wood - Titleist 917F2 15
    Hybrids - Titleist 915Hd 20
    Irons - Titleist 716MB 4-9
    Wedges - Titleist SM6 48/52/56/62
    Putter - Scotty Studio Select Newport 2
  • bladehunterbladehunter Today was a good day... south carolinaMembers Posts: 27,030 ✭✭
    Wuuuut???^^^^. I leave the equipment forums in you guys hands and comeback and the 790 and Tmb are now “ blades”. ? Lol. 790 are like 8 inches heel to toe.
    TM Tour M6 11.2 * KK Tini XTS 70X
    Ping G410 15.5* Graphite Design ADDI 8x
    Ping G410 21* ADDI 105x 
    Ping Blueprint  3-PW   Modus 130X 
    Ping Glide Forged   54 60 S400
    Cameron GSS 009 1.5 tungsten sole weights, sound slot


  • dhen9dhen9 Members Posts: 669 ✭✭
    "While I think it could be interesting to see where things could go with blades given the resources (we're starting to see it with PXG driving the train), I don't think the "true" solid forged blade is going to advance much past it's current point given the market."



    I concur. Although tongue in cheek from earlier if blades are going to survive they are going to do so with the help of science. Advanced metallurgy and multi material builds will put them back in the hands of the "every Golfer". We are at the very small beginning swell of a giant crest that is new iron tech. This decade will be that of the iron as driver tech is all but maxxed and manufacturer's have to continue to turn out product. As someone who's owned Hogan Apex (mid 90's) to 0311XF and almost everything in between I can't wait to see what golfs smartest guys cook up next.
  • bladehunterbladehunter Today was a good day... south carolinaMembers Posts: 27,030 ✭✭
    Maybe IF somebody comes up with a 790 type iron with a sharp leading edge and a sole that doesn’t bounce , so you can actuallly compress the ball I could see it. The biggest gripe I have with modern irons is that they all have such dull and wide soles. You cannot take a divot on anything short of wet ground. And no divot , equals no compression , which is less spin , which is less control. And that is counter productive.
    TM Tour M6 11.2 * KK Tini XTS 70X
    Ping G410 15.5* Graphite Design ADDI 8x
    Ping G410 21* ADDI 105x 
    Ping Blueprint  3-PW   Modus 130X 
    Ping Glide Forged   54 60 S400
    Cameron GSS 009 1.5 tungsten sole weights, sound slot


  • BiggErnBiggErn Members Posts: 2,437 ✭✭
    Maybe IF somebody comes up with a 790 type iron with a sharp leading edge and a sole that doesn’t bounce , so you can actuallly compress the ball I could see it. The biggest gripe I have with modern irons is that they all have such dull and wide soles. You cannot take a divot on anything short of wet ground. And no divot , equals no compression , which is less spin , which is less control. And that is counter productive.






    What? A wider sole can only help it’s not gonna hurt a good ball striker. Buy the time any of what you said happens the ball is gone. Hit the ball in the middle of the face and you’ll have plenty of spin and control...a divot is inconsequential.
  • Nard_SNard_S Members Posts: 3,348 ✭✭
    OR..........



    Blades remain boutique and they stay traditional with an eye on premium excellence in forging, fit and finish. A Rolex time piece for a timeless game. Many predicted the demise of the mechanical watch some decades ago. It never happened. Instead it went boutique and collectable.There's precedence in enthusiasts going retro & "purist" in many activities. Running (minimalist shoes), mountain climbing (free), car collecting (barn finds) to name a few. Golf values tradition but has a ravenous appetite for new tech. Sort of like gun collecting. Some marvel at historical arms but many are tantalized by the latest and greatest in technology. Both arteries of enthusiasm drive the passion of weapons. So would not be surprised if golf equipment moves more in such a way and guys like Boyd Blades do well and there's a decent pool of 'traditionalists' to keep them going while gee whiz tech drives the masses to pony up for latest and greatest every product cycle.
This discussion has been closed.