Miura MC 501 ... any one hit it?

[MysteryV]

I hit these and liked them quite a bit. Not as much as my BBs, but close

[howeber]

I hit these and liked them quite a bit. Not as much as my BBs, but close

 

How much larger heel to toe were they then the baby blades? Miura says they’re the “longest blade” they’ve made but I’m hoping they’re still relatively compact. Anything else you can compare them to?

[MysteryV]

Hrm, I don't really recall them being large. My MP29's look awkward and large. My MP4's look normal. I recall the 501s looking good, however I didn't get to inspect the entire set as I was at Club Champion.

 

Not sure that helps - but it's all I can recall.

[BLITZ31]

i love the way these look. the feel is just as advertised with Miura. I have a set of cb501 that i love, but would love to upgrade one day to the mc501. Very pure but not as forgiving as a cb501

[A.G. Pennypacker]

I hit these and liked them quite a bit. Not as much as my BBs, but close

 

How much larger heel to toe were they then the baby blades? Miura says they're the "longest blade" they've made but I'm hoping they're still relatively compact. Anything else you can compare them to?

 

I play BBs, and I've hit these. They are definitely a little longer heel to toe than the BBs, but not a lot. They play very much like a typical blade, set up small behind the ball. One thing I didn't like about them was the very thin topline; I like how the baby blades have a bit of a thicker topline than these.

[howeber]

I hit these and liked them quite a bit. Not as much as my BBs, but close

 

How much larger heel to toe were they then the baby blades? Miura says they're the "longest blade" they've made but I'm hoping they're still relatively compact. Anything else you can compare them to?

 

I play BBs, and I've hit these. They are definitely a little longer heel to toe than the BBs, but not a lot. They play very much like a typical blade, set up small behind the ball. One thing I didn't like about them was the very thin topline; I like how the baby blades have a bit of a thicker topline than these.

Hrm, I don't really recall them being large. My MP29's look awkward and large. My MP4's look normal. I recall the 501s looking good, however I didn't get to inspect the entire set as I was at Club Champion.

 

Not sure that helps - but it's all I can recall.

 

Thanks! I bit the bullet and ordered some heads.... will post my thoughts after I get them.

[TMfan54]

Does anyone have experience with the Tournament blades compared to these? I am looking for a little more fogiveness in the 4 iron and 5 iron.

[wattage]

I won a fitting at True Spec Golf and will do a full bag fitting later his month, even though my baby blades are only a few months old :).

Def interested in trying these as well as a few more tech oriented offerings, AP,Miz SC, etc.

 

Will Peoples has these in raw,satin, and black....hmm. Black or Raw look good!

[eaglestan66]

Wattage - congrats on the fitting.

Let me know what tickles your fancy after breaking-in the Miura Baby Blades!

-Stan

[MysteryV]

I've been having a very hard time not picking up the Blacks or Raws from Peoples Golf. Must...exercise....self....restraint..............

[EaglesGolf99]

I've been having a very hard time not picking up the Blacks or Raws from Peoples Golf. Must...exercise....self....restraint..............

 

Same.

[beautytherot]

I hit these and liked them quite a bit. Not as much as my BBs, but close

 

How much larger heel to toe were they then the baby blades? Miura says they're the "longest blade" they've made but I'm hoping they're still relatively compact. Anything else you can compare them to?

 

I play BBs, and I've hit these. They are definitely a little longer heel to toe than the BBs, but not a lot. They play very much like a typical blade, set up small behind the ball. One thing I didn't like about them was the very thin topline; I like how the baby blades have a bit of a thicker topline than these.

Hrm, I don't really recall them being large. My MP29's look awkward and large. My MP4's look normal. I recall the 501s looking good, however I didn't get to inspect the entire set as I was at Club Champion.

 

Not sure that helps - but it's all I can recall.

 

Thanks! I bit the bullet and ordered some heads.... will post my thoughts after I get them.

just wondering where you were able to just purchase heads

[Crooksc17]

Can anyone compare these to the MB-001?

[wattage]

So, I got to hit the MC 501 vs my BBs. Sorry fellas, I forgot to take side-by-side photos=FAIL on my part.

They look good: I like the rounded and shorter toe height of MC; but prefer the less offset of BBs. I didn't find the sole to skip or be too wide on the MCs-I was worried about that. I found the unconscious desire to hit more down on MCs tho. I would like to see whole set before purchasing due to offset amount.

 

Felt a bit more forgiving than BB, similar Miura but a purer BB still wins in my book.

 

**I still have a big problem with the fitting model of our beloved Miura and other high end clubs**

==We need to see and be able to hit the entire set! I want to see the 9 iron and wedge, ya feel me?? I can't help but think the lack of visibility in stores or even fitters cuts down on their sales.

 

Trackman time:

MC 501 w Oban CT 115:

89/126 mph; 15*, 6148 rpm, 178/186 yds, -3.9 AoA, 47* land angle

 

BB Modus 120S hard stepped:

88/123 mph; 15.7*, 6288rpm, 173/180 yds, -3.1 AoA, 47* land angle

 

Pretty similar, MC is about 1-1.5* stronger loft, and shaft was about 1/4" longer. This might make up for 1/2 club longer--also see higher ball speed and less spin.

 

I like them but not for #260/club right now.

 

Interested in y'alls thoughts.

B

[IIvudooII]

Love to hear.

 

How does it compare to the Miura CB 57?

 

Thanks.

you mean these? I don’t know how they compare but what I do know is that they feel great.

[jamgam]

man I've been jonesing over these. Trying to figure out a way to hit them (I've hit other Miuras) before plunking down a sizable hunk of change

[aknow]

I just received a set of black Mc 501's from Chris at Tourspec. I can't really compare these to any clubs I've tried, they remind me of my simple Wilson Staff blades from the 1960's. They feel superb when hit anywhere close to sweet spot. When I hit them correctly, they launch unbelievably high. I am having so much fun hitting these on the driving range, they look so great at set-up.

For me, they might be 5% shorter than Srixon z565's, but the Miura's are more accurate. I also got a chromed 52 degree Miura wedge, like a piece of jewelry. Today I had 178 yd par 3 downwind. Hit Miura 3/4 6 iron to level green, landed 8 feet away, and stopped in 2 feet. These are FINE irons! Hope some of you get a chance to try them.

[wcgolf]

I will have a set of the satin heads in hand on Tuesday and can get some pictures up for you guys that might be interested in the MC 501. I will also have MB001 for pictures as well. I also have a completed set of CB1008 if y’all want pictures of those as well!

[jamgam]

Just can't help myself sometimes. Soooooo nice on center hits

 

[denvergolf]

I will have a set of the satin heads in hand on Tuesday and can get some pictures up for you guys that might be interested in the MC 501. I will also have MB001 for pictures as well. I also have a completed set of CB1008 if y'all want pictures of those as well!

I would love some pics at address. Thanks in advance!

[mixedguy]

 

 

 

[ian-500]

Beauties. I still think that the MB5005 are better looking.....just.

[moorebaseball]

 

 

 

 

I hit these clubs, and they are pure butter. Them and the Epons were neck in neck.

[tmb guy]

I will have a set of the satin heads in hand on Tuesday and can get some pictures up for you guys that might be interested in the MC 501. I will also have MB001 for pictures as well. I also have a completed set of CB1008 if y'all want pictures of those as well!

did you have a chance to take pics vs mb001 is their alot more offset

[boycer]

The black finish looks awesome.

[chonkoa]

I will have a set of the satin heads in hand on Tuesday and can get some pictures up for you guys that might be interested in the MC 501. I will also have MB001 for pictures as well. I also have a completed set of CB1008 if y'all want pictures of those as well!

I will have a set of the satin heads in hand on Tuesday and can get some pictures up for you guys that might be interested in the MC 501. I will also have MB001 for pictures as well. I also have a completed set of CB1008 if y'all want pictures of those as well!

That will be nice.

My project is to build to a set of MB 001/MC 501 combo to make my first set of complete Miura.

[ghoonk]

I have a set of Black MC-501 4-PW fitted with black satin TT AMT white label shafts. They are wonderfully soft and much more forgiving than my MB-5003 irons. While I get more distance playing my M-CGB (bad day sets), I almost always prefer to game the 501s. I lose around 10-15 yards on the shorter irons and 20-25 on the long irons but the 501s feel like a million bucks when i strike them right

[tmb guy]

some comparison pics\

[Tzoid]

I have a set of Black MC-501 4-PW fitted with black satin TT AMT white label shafts. They are wonderfully soft and much more forgiving than my MB-5003 irons. While I get more distance playing my M-CGB (bad day sets), I almost always prefer to game the 501s. I lose around 10-15 yards on the shorter irons and 20-25 on the long irons but the 501s feel like a million bucks when i strike them right

 

 

I have read many feedback posts on the MC-501 and everyone talks about how great they feel on Center Hits which leads me to believe they have the typical great Miura feedback. That also leads me to believe they aren't very forgiving. Is that an accurate assumption?

 

They are beauts but I don;t want to go backwards in performance if my ball striking is off.

[tmb guy]

I have a set of Black MC-501 4-PW fitted with black satin TT AMT white label shafts. They are wonderfully soft and much more forgiving than my MB-5003 irons. While I get more distance playing my M-CGB (bad day sets), I almost always prefer to game the 501s. I lose around 10-15 yards on the shorter irons and 20-25 on the long irons but the 501s feel like a million bucks when i strike them right

 

 

I have read many feedback posts on the MC-501 and everyone talks about how great they feel on Center Hits which leads me to believe they have the typical great Miura feedback. That also leads me to believe they aren't very forgiving. Is that an accurate assumption?

 

They are beauts but I don;t want to go backwards in performance if my ball striking is off.

 

they shouldnt be mistaken for forgiving no but for what they are they are extremely playable compared to others (mb001, apexmb,p 730)