Jump to content
2024 Houston Open WITB Photos ×

Stuck Iron Head - Dry Fit


MysteryV

Recommended Posts

Guys,

 

I feel a bit dumb posting this, but I was dry fitting a heads onto a shaft and the thing is as stuck as stuck gets. I've worn out my hands trying to twist it off. I've put it in a vise and twisted / pulled. I've given it a few raps with a soft mallet. I've stuck an alignment stick down the shaft and given it a few raps. I've heated it with a torch.

 

Nothing seems to work.

 

Any ideas here? Unfortunately it's a brand new black Miura head, and Oban CT-115 shaft, so I'm hoping not to damage anything.

 

:/

 

HELP!!!

SIM2 Graphite Design Ventus TR 60X

PXG Gen 3, Project X

Epic 3w/5w/4h - Tour AD-DI

Wedgeworks SM8 55D / 60T

Scotty Cameron T22 FB

Link to comment
Share on other sites

  • Replies 15
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Guess I'll take it into Golf Mart tomorrow and see if they might help.

 

Since I'm lucky enough to have such helpful folks - maybe you can help me with the question that got me into this prediciment. For some reason, after reaming the heads (Miura come very tight) with a .355 reamer (from Golfworks - by hand) - I seem to get differing depths of insertion. 4 of the 7 will go about 1.15" in, while the P, 8, 7, bottom out around 0.95 inches.

 

This really bothers me, but I'm not sure if it should, nor am I sure what to do about it.

 

Any advice is appreciated.

SIM2 Graphite Design Ventus TR 60X

PXG Gen 3, Project X

Epic 3w/5w/4h - Tour AD-DI

Wedgeworks SM8 55D / 60T

Scotty Cameron T22 FB

Link to comment
Share on other sites

Steel (not fibreglass) rod down the shaft and pound the head off. It should pop off relatively easily unless you pounded it on. Then you just need to hit it harder than you pounded it on to get the head off.

 

You are not reaming to the bottom of the hosel. There is no question about that in my mind. Take a small object (I have a thin rod on my bench) and measure to the bottom of the hosel. If it doesn't agree with the inserted depth, you need to ream it better.

Ping G400 9º TFC 419 Stiff at 45"

Jazz 3 wd Powercoil Stiff
Rogue 3iron Recoil 660 F3 +1/2"
X2 Hot 4-AW Recoil 660 F3 +1/2"
Vokey SM2 52º cc, SM4 56°, SM4 60°
Ping Sigma2 Valor at 34.75"
MCC Align Midsize

Link to comment
Share on other sites

Steel (not fibreglass) rod down the shaft and pound the head off. It should pop off relatively easily unless you pounded it on. Then you just need to hit it harder than you pounded it on to get the head off.

 

You are not reaming to the bottom of the hosel. There is no question about that in my mind. Take a small object (I have a thin rod on my bench) and measure to the bottom of the hosel. If it doesn't agree with the inserted depth, you need to ream it better.

 

This.

 

It can only be the depth and diameter of the ream job or the diameter of the shaft. Check each of the shafts and the depth of the bore with a set of calipers and you'll know.

Link to comment
Share on other sites

Have you tried adding a little heat to it? Maybe spraying a little WD40 in it?

Ping G430 10k 9*  Ventus Velocore blue 6x

Ping G430 LST 15* HZRDUS smoke yellow 70s

Ping G430 19* Tour Chrome 2.0 85s

PXG 0211  4i KBS C Taper Lite 115x ss1x

Srixon zx7 mkii 5-7, Z forged ii 8-P KBS C Taper Lite 

Ping s159 50/12s, 54/10h, 58/8b  KBS Tour
Scotty Cameron NP2 Studio Stainless  34"

 

 

 

Link to comment
Share on other sites

Have you tried adding a little heat to it? Maybe spraying a little WD40 in it?

He needs to be careful with any of that since it is a black head and you don't want to do anything that will change the color.

Ping G400 9º TFC 419 Stiff at 45"

Jazz 3 wd Powercoil Stiff
Rogue 3iron Recoil 660 F3 +1/2"
X2 Hot 4-AW Recoil 660 F3 +1/2"
Vokey SM2 52º cc, SM4 56°, SM4 60°
Ping Sigma2 Valor at 34.75"
MCC Align Midsize

Link to comment
Share on other sites

Agree with the rod. Add a little penetrating oil on the edge of the shaft to hosel contact too. Just be sure to clean off the oil afterwards or your epoxy won't stick.

Ping G400 Max driver w/Aldila Rogue 125 Silver
Ping G425 5 wood & hybrid
Ping G30 irons w/Recoil 95

Ping G425 irons w/Accra ICWT 2.0 95
Ping Glide wedges w/Recoil 110
Ping Redwood Anser - the "real deal!"

Link to comment
Share on other sites

Having been in this situation before putting the head under running hot water for a bit has helped in the past.

 

If that doesn't work, shaft puller is the way to go.

Ping G430 LST 10.5* : Ventus Red TR 7S

Titleist TSR2 4W : Tensei 1K Black 85-S

Mizuno CLK 19*: Ventus Blue HB-8S

Srixon ZX Utility #4: Nippon Modus3 125-S

Wilson Staff CB 5-PW : Nippon Modus3 125-S

Cleveland Zipcore 50, 54, 58: Nippon Modus3 125-S 

Piretti Potenza 370g : Breakthrough Technology Stability Shaft - 34"

Link to comment
Share on other sites

Thank you everyone!

 

Thing was STUCK STUCK. I took it into The Golf Mart and they were able to use the hydraulic shaft puller to take the head off. Original problem solved.

 

Now the issue remains that the shafts just wont seat all the way down in the heads. Reading through previous threads, Miura heads need to be reamed, however I've done that with the .355 reamer that Golfworks sells, and am now at a loss as to what to do. I certainly don't want to to create slop in the hosels, and I also don't want to take material off the shaft tips.

 

Thoughts?

SIM2 Graphite Design Ventus TR 60X

PXG Gen 3, Project X

Epic 3w/5w/4h - Tour AD-DI

Wedgeworks SM8 55D / 60T

Scotty Cameron T22 FB

Link to comment
Share on other sites

You would be better off sanding the shafts a little to see if that helps. It will be the easiest solution. Be very careful around graphite when sanding, nasty stuff. Do not use air for anything while sanding. If you could place the shaft on a rubber mat and spin it while applying sandpaper to the shaft. Make sure to tape off any area not being sanded. Electrical tape might be good for this.

Bag is in overhaul mode

Clubs identify as hacker set

Link to comment
Share on other sites

You would be better off sanding the shafts a little to see if that helps. It will be the easiest solution. Be very careful around graphite when sanding, nasty stuff. Do not use air for anything while sanding. If you could place the shaft on a rubber mat and spin it while applying sandpaper to the shaft. Make sure to tape off any area not being sanded. Electrical tape might be good for this.

 

Oban CT-115’s are steel shafts.

Link to comment
Share on other sites

Have you tried adding a little heat to it? Maybe spraying a little WD40 in it?

He needs to be careful with any of that since it is a black head and you don't want to do anything that will change the color.

 

It's amazing what even a very little bit of heat can do... if you damage a black head with a flame you should never be allowed to play with fire ever again.

Ping G430 10k 9*  Ventus Velocore blue 6x

Ping G430 LST 15* HZRDUS smoke yellow 70s

Ping G430 19* Tour Chrome 2.0 85s

PXG 0211  4i KBS C Taper Lite 115x ss1x

Srixon zx7 mkii 5-7, Z forged ii 8-P KBS C Taper Lite 

Ping s159 50/12s, 54/10h, 58/8b  KBS Tour
Scotty Cameron NP2 Studio Stainless  34"

 

 

 

Link to comment
Share on other sites

Have you tried adding a little heat to it? Maybe spraying a little WD40 in it?

He needs to be careful with any of that since it is a black head and you don't want to do anything that will change the color.

 

It's amazing what even a very little bit of heat can do... if you damage a black head with a flame you should never be allowed to play with fire ever again.

More concerned about the WD-40 staining it.

Ping G400 9º TFC 419 Stiff at 45"

Jazz 3 wd Powercoil Stiff
Rogue 3iron Recoil 660 F3 +1/2"
X2 Hot 4-AW Recoil 660 F3 +1/2"
Vokey SM2 52º cc, SM4 56°, SM4 60°
Ping Sigma2 Valor at 34.75"
MCC Align Midsize

Link to comment
Share on other sites

Have you tried adding a little heat to it? Maybe spraying a little WD40 in it?

He needs to be careful with any of that since it is a black head and you don't want to do anything that will change the color.

 

It's amazing what even a very little bit of heat can do... if you damage a black head with a flame you should never be allowed to play with fire ever again.

More concerned about the WD-40 staining it.

 

Won't happen. You should only be applying it to the inside of the hosel in this case anyway. Like mentioned earlier, you'd only have to be concerned about getting it all cleaned out before epoxy. If it gets on the outside, just wipe it off.

Ping G430 10k 9*  Ventus Velocore blue 6x

Ping G430 LST 15* HZRDUS smoke yellow 70s

Ping G430 19* Tour Chrome 2.0 85s

PXG 0211  4i KBS C Taper Lite 115x ss1x

Srixon zx7 mkii 5-7, Z forged ii 8-P KBS C Taper Lite 

Ping s159 50/12s, 54/10h, 58/8b  KBS Tour
Scotty Cameron NP2 Studio Stainless  34"

 

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Our picks

    • 2024 Texas Children's Houston Open - Discussion and links to Photos
      Please put any questions or Comments here
       
       
       
      General Albums
       
      2024 Texas Children's Houston Open - Monday #1
      2024 Texas Children's Houston Open - Monday #2
      2024 Texas Children's Houston Open - Tuesday #1
      2024 Texas Children's Houston Open - Tuesday #2
      2024 Texas Children's Houston Open - Tuesday #3
       
       
       
       
      WITB Albums
       
      Thorbjorn Olesen - WITB - 2024 Texas Children's Houston Open
      Ben Silverman - WITB - 2024 Texas Children's Houston Open
      Jesse Droemer - SoTX PGA Section POY - WITB - 2024 Texas Children's Houston Open
      David Lipsky - WITB - 2024 Texas Children's Houston Open
      Martin Trainer - WITB - 2024 Texas Children's Houston Open
      Zac Blair - WITB - 2024 Texas Children's Houston Open
      Jacob Bridgeman - WITB - 2024 Texas Children's Houston Open
      Trace Crowe - WITB - 2024 Texas Children's Houston Open
      Jimmy Walker - WITB - 2024 Texas Children's Houston Open
      Daniel Berger - WITB(very mini) - 2024 Texas Children's Houston Open
      Chesson Hadley - WITB - 2024 Texas Children's Houston Open
      Callum McNeill - WITB - 2024 Texas Children's Houston Open
      Rhein Gibson - WITB - 2024 Texas Children's Houston Open
      Patrick Fishburn - WITB - 2024 Texas Children's Houston Open
      Peter Malnati - WITB - 2024 Texas Children's Houston Open
      Raul Pereda - WITB - 2024 Texas Children's Houston Open
      Gary Woodland WITB (New driver, iron shafts) – 2024 Texas Children's Houston Open
      Padraig Harrington WITB – 2024 Texas Children's Houston Open
       
       
       
       
      Pullout Albums
       
      Tom Hoge's custom Cameron - 2024 Texas Children's Houston Open
      Cameron putter - 2024 Texas Children's Houston Open
      Piretti putters - 2024 Texas Children's Houston Open
      Ping putter - 2024 Texas Children's Houston Open
      Kevin Dougherty's custom Cameron putter - 2024 Texas Children's Houston Open
      Bettinardi putter - 2024 Texas Children's Houston Open
      Cameron putter - 2024 Texas Children's Houston Open
      Erik Barnes testing an all-black Axis1 putter – 2024 Texas Children's Houston Open
      Tony Finau's new driver shaft – 2024 Texas Children's Houston Open
       
       
       
       
       
      • 7 replies
    • 2024 Valspar Championship WITB Photos (Thanks to bvmagic)- Discussion & Links to Photos
      This weeks WITB Pics are from member bvmagic (Brian). Brian's first event for WRX was in 2008 at Bayhill while in college. Thanks so much bv.
       
      Please put your comments or question on this thread. Links to all the threads are below...
       
       
       
       
        • Like
      • 31 replies
    • 2024 Arnold Palmer Invitational - Discussion and Links to Photos
      Please put any questions or comments here
       
       
       
      General Albums
       
      2024 Arnold Palmer Invitational - Monday #1
      2024 Arnold Palmer Invitational - Monday #2
      2024 Arnold Palmer Invitational - Monday #3
       
       
       
       
      WITB Albums
       
      Matt (LFG) Every - WITB - 2024 Arnold Palmer Invitational
      Sahith Theegala - WITB - 2024 Arnold Palmer Invitational
       
       
       
       
       
      Pullout Albums
       
      New Cameron putters (and new "LD" grip) - 2024 Arnold Palmer Invitational
      New Bettinardi MB & CB irons - 2024 Arnold Palmer Invitational
      Custom Bettinardi API putter cover - 2024 Arnold Palmer Invitational
      Custom Swag API covers - 2024 Arnold Palmer Invitational
      New Golf Pride Reverse Taper grips - 2024 Arnold Palmer Invitational
       
       
       
       
       
       
       
        • Like
      • 15 replies
    • 2024 Cognizant Classic - Discussion and Links to Photos
      Please put any questions or comments here
       
       
       
       
      General Albums
       
      2024 Cognizant Classic - Monday #1
      2024 Cognizant Classic - Monday #2
      2024 Cognizant Classic - Monday #3
      2024 Cognizant Classic - Monday #4
       
       
       
      WITB Albums
       
      Brandt Snedeker - WITB - 2024 Cognizant Classic
      Max Greyserman - WITB - 2024 Cognizant Classic
      Eric Cole - WITB - 2024 Cognizant Classic
      Carl Yuan - WITb - 2024 Cognizant Classic
      Russell Henley - WITB - 2024 Cognizant Classic
      Justin Sun - WITB - 2024 Cognizant Classic
      Alex Noren - WITB - 2024 Cognizant Classic
      Shane Lowry - WITB - 2024 Cognizant Classic
      Taylor Montgomery - WITB - 2024 Cognizant Classic
      Jake Knapp (KnappTime_ltd) - WITB - - 2024 Cognizant Classic
       
       
       
      Pullout Albums
       
      New Super Stoke Pistol Lock 1.0 & 2.0 grips - 2024 Cognizant Classic
      LA Golf new insert putter - 2024 Cognizant Classic
      New Garsen Quad Tour 15 grip - 2024 Cognizant Classic
      New Swag covers - 2024 Cognizant Classic
      Jacob Bridgeman's custom Cameron putter - 2024 Cognizant Classic
      Bud Cauley's custom Cameron putters - 2024 Cognizant Classic
      Ryo Hisatsune's custom Cameron putter - 2024 Cognizant Classic
      Chris Kirk - new black Callaway Apex CB irons and a few Odyssey putters - 2024 Cognizant Classic
      Alejandro Tosti's custom Cameron putter - 2024 Cognizant Classic
       
       
       
       
       
       
       
       
        • Like
      • 2 replies
    • 2024 Genesis Invitational - Discussion and Links to Photos
      Please put any questions or comments here
       
       
       
      General Albums
       
      2024 Genesis Invitational - Monday #1
      2024 Genesis Invitational - Monday #2
      2024 Genesis Invitational - Tuesday #1
      2024 Genesis Invitational - Tuesday #2
      2024 Genesis Invitational - Tuesday #3
      2024 Genesis Invitational - Tuesday #4
       
       
       
       
      WITB Albums
       
      Rory McIlroy - WITB - 2024 Genesis Invitational
      Sepp Straka - WITB - 2024 Genesis Invitational
      Patrick Rodgers - WITB - 2024 Genesis Invitational
      Brendon Todd - WITB - 2024 Genesis Invitational
      Denny McCarthy - WITB - 2024 Genesis Invitational
      Corey Conners - WITB - 2024 Genesis Invitational
      Chase Johnson - WITB - 2024 Genesis Invitational
      Tiger Woods - WITB - 2024 Genesis Invitational
      Tommy Fleetwood - WITB - 2024 Genesis Invitational
      Matt Fitzpatrick - WITB - 2024 Genesis Invitational
      Si Woo Kim - WITB - 2024 Genesis Invitational
      Viktor Hovland - WITB - 2024 Genesis Invitational
      Wyndham Clark - WITB - 2024 Genesis Invitational
      Cam Davis - WITB - 2024 Genesis Invitational
      Nick Taylor - WITB - 2024 Genesis Invitational
      Ben Baller WITB update (New putter, driver, hybrid and shafts) – 2024 Genesis Invitational
       
       
       
       
       
      Pullout Albums
       
      New Vortex Golf rangefinder - 2024 Genesis Invitational
      New Fujikura Ventus shaft - 2024 Genesis Invitational
      Tiger Woods & TaylorMade "Sun Day Red" apparel launch event, product photos – 2024 Genesis Invitational
      Tiger Woods Sun Day Red golf shoes - 2024 Genesis Invitational
      Aretera shafts - 2024 Genesis Invitational
      New Toulon putters - 2024 Genesis Invitational
      Tiger Woods' new white "Sun Day Red" golf shoe prototypes – 2024 Genesis Invitational
       
       
       
       
       
      • 22 replies

×
×
  • Create New...