Jump to content
2024 RBC Heritage WITB photos ×

How steep should the shoulder turn be?


Golfbeat

Recommended Posts

I am still struggling a bit with finding the "ideal" level of steepness of the shoulder turn both into the back swing and down swing. When you put an alignment stick along your shoulders, should it point at the ball or outside the ball for a 7 iron? Is it the same for the back swing and down swing as well? I see that not all instructors have the same opinions on this. Obviously, for a driver it would be less steep than for a lob wedge but I would be interested in a stock position for a mid iron.

 

It seems that many amateurs are suffering from a too flat shoulder turn which can lead to many issues as a too much inside out or outside in path, casting, lack of shaft lean etc.

 

When I see pictures of pros in their back swing, I can see both arms. I rarely see this with amateurs. This must be the result of a steeper shoulder turn (and perhaps less forearm rotation).

 

There should be some data from 3D measuring I assume but I would like to know how to implement this with an alignment stick across the shoulders. Or, perhaps with another drill.

 

Thanks for your help.

Link to comment
Share on other sites

The shoulders should turn approximately perpendicular to spine angle at address. For a lot of people, myself included, it almost feels like the the lead shoulder works straight down so very steep and the downswing shoulder turn feels very very flat. I have taken video of myself where I feel like my downswing shoulder turn is level to the ground and it's right on plane. This is really a good situation for which the new mirror vision app would be very beneficial.

Driver: Sim2 with Ventus Blue 6x
FWY: Sim 2 Ti w/ TenseiAV Raw Blue 75x
Hybrid: PXG 0317x 17* with Fuji Pro 2.0 85x
Irons: PXG 0211ST w/KBS Tour X
54*: Titleist SM6 S grind black finish
58*: New Level Golf SPN Forged M Grind
Putter: Toulon San Diego

Link to comment
Share on other sites

Rotate shoulders level to horizon and relative steepness will find spine angle.

 

I understand that this is the theory. However, when I think I execute this, I am on video in reality much flatter in the back swing than I think I am based on feel. I see this flat shoulder turn over and over again on photos and videos of amateurs. That why I think it has to be drilled in with a feel drill.

Link to comment
Share on other sites

Rotate shoulders level to horizon and relative steepness will find spine angle.

 

I understand that this is the theory. However, when I think I execute this, I am on video in reality much flatter in the back swing than I think I am based on feel. I see this flat shoulder turn over and over again on photos and videos of amateurs. That why I think it has to be drilled in with a feel drill.

 

Moving off the ball perhaps, or some other items, but it is far removed from theory.

Link to comment
Share on other sites

My go to shoulder turn drill courtesy Andrew Rice.

 

  • Like 1

 

Sealed with a curse as sharp as a knife.  Doomed is your soul and damned is your life.
Enjoy every sandwich

The first rule of the Dunning-Kruger club is that you don’t know you are a member.   The second rule is that we’re all members from time to time.

One drink and that's it. Don't be rude. Drink your drink... do it quickly. Say good night...and go home ...

#kwonified

 

 

Link to comment
Share on other sites

My go to shoulder turn drill courtesy Andrew Rice.

 

[media=]

[/media]

 

Thanks, that's what I was looking for. What I am saying is that this is a lot steeper than most amateurs, including myself, are doing. Even when fully aware of the theory of "keeping the spine angle".

Yep. Important thing to me is the lead knee works out toward toes and pivot brings it a bit toward the trail. Face on doesn’t look like much though

Like this ( in my dreams).

 

 

Sealed with a curse as sharp as a knife.  Doomed is your soul and damned is your life.
Enjoy every sandwich

The first rule of the Dunning-Kruger club is that you don’t know you are a member.   The second rule is that we’re all members from time to time.

One drink and that's it. Don't be rude. Drink your drink... do it quickly. Say good night...and go home ...

#kwonified

 

 

Link to comment
Share on other sites

Yes, he has the "two arms look" in the back swing I was referring to.

No right elbow peeking under left arm at the top. Pretty much a sign of flat turn.

 

Sealed with a curse as sharp as a knife.  Doomed is your soul and damned is your life.
Enjoy every sandwich

The first rule of the Dunning-Kruger club is that you don’t know you are a member.   The second rule is that we’re all members from time to time.

One drink and that's it. Don't be rude. Drink your drink... do it quickly. Say good night...and go home ...

#kwonified

 

 

Link to comment
Share on other sites

Dont know how much sense this makes, but my shoulder turn is determined by my hand path. Im a big believer in the "hands in, club head out" intent. As I move my hands in with my turn, and keep trail elbow straight, my shoulders turn on proper plane. As mentioned in OP, not rolling forearms over too quickly helps alot.

Link to comment
Share on other sites

Obviously, for a driver it would be less steep than for a lob wedge but I would be interested in a stock position for a mid iron.

 

It seems that many amateurs are suffering from a too flat shoulder turn which can lead to many issues as a too much inside out or outside in path, casting, lack of shaft lean etc.

Driver to LW should have the same exact steepness. The difference should be where the impact is located in front of you.

 

Most amateurs come outside in and not in to out. Hooking is more common in better players and pulls or fades/slices are more common with higher handicapped players.

 

The only thing I can add to this is to not bend over as much as you think you should.

Link to comment
Share on other sites

A few months back, Tyler had a good video on incorporating sidebend and rotation into the backswing. His take - do sidebend first - get the lead shoulder moving down to the lead foot - it won’t but it works well to blend the two versus starting with a feel of rotation. If doing Andrew rice drill it’s easy to get.

  • Like 1

 

Sealed with a curse as sharp as a knife.  Doomed is your soul and damned is your life.
Enjoy every sandwich

The first rule of the Dunning-Kruger club is that you don’t know you are a member.   The second rule is that we’re all members from time to time.

One drink and that's it. Don't be rude. Drink your drink... do it quickly. Say good night...and go home ...

#kwonified

 

 

Link to comment
Share on other sites

I was also reminded again of the back swing method of J.F. Tamayo. You can read it for free if you have Amazon Unlimited.

 

https://www.amazon.com/FINALLY-revolutionary-significantly-distance-accuracy-ebook/dp/B00342WI42/ref=sr_1_2?ie=UTF8&qid=1547648693&sr=8-2&keywords=tamayo+golf

 

It is quite different. I had some good success with it and then forgot all about it. He basically says that most people turn too flat and he has a simple trick to get the shoulders turning much steeper.

Link to comment
Share on other sites

Obviously, for a driver it would be less steep than for a lob wedge but I would be interested in a stock position for a mid iron.

 

It seems that many amateurs are suffering from a too flat shoulder turn which can lead to many issues as a too much inside out or outside in path, casting, lack of shaft lean etc.

Driver to LW should have the same exact steepness. The difference should be where the impact is located in front of you.

 

Most amateurs come outside in and not in to out. Hooking is more common in better players and pulls or fades/slices are more common with higher handicapped players.

 

The only thing I can add to this is to not bend over as much as you think you should.

 

It won’t be the same with all clubs.

Link to comment
Share on other sites

I was also reminded again of the back swing method of J.F. Tamayo. You can read it for free if you have Amazon Unlimited.

 

https://www.amazon.c...rds=tamayo golf

 

It is quite different. I had some good success with it and then forgot all about it. He basically says that most people turn too flat and he has a simple trick to get the shoulders turning much steeper.

So what is the simple trick?

Link to comment
Share on other sites

You shouldn't be concerned with it unless you're at the limits of either spectrum, too horizontal or too vertical. If you want to hit the ball with power and accuracy you should figure out how to make a small pulley with your hands and club. For the short game try to make a bigger pulley (start club head first). I think it was Kevin M. who I first saw talking about 2 different games.

Link to comment
Share on other sites

I was also reminded again of the back swing method of J.F. Tamayo. You can read it for free if you have Amazon Unlimited.

 

https://www.amazon.c...rds=tamayo golf

 

It is quite different. I had some good success with it and then forgot all about it. He basically says that most people turn too flat and he has a simple trick to get the shoulders turning much steeper.

So what is the simple trick?

 

It's a very short read and I do not want to infringe on copyrights. However, it basically comes down to keeping your left shoulder very close to your body and turn it down inside your toe line towards your right ankle. It will feel more like a downward, lateral slide of the left shoulder to the right than a turn.

  • Like 1
Link to comment
Share on other sites

First of all don't sway your upper body away from the target on the backswing. Swaying can encourage a flat shoulder turn. Try to be centered.

 

Second, feel like you point your left shoulder at your feet as you take the club away and at the top of the backswing. If you get too steep a shoulder turn, back that off a little and not pointed so vertical downwards however, if you suffer a very flat shoulder shoulder turn you probably need to feel the left shoulder point down as vertical as possible.

Link to comment
Share on other sites

My go to shoulder turn drill courtesy Andrew Rice.

 

[media=]

[/media]

Can't tell you how eye opening this was for me. I always felt like my backswing was steep enough and guess what...not even close. I tried this and bang right into the wall with the handle. I am an S&T golfer who has had some struggles with arms coming off the chest in the follow through and shoulder down is one of the main keys to success for S&T and I was no where close. This drill along with the tour striker ball have really helped me get the right feels and my arms/club in a much better position through the hitting area in my practice at home. Looking forward to taking it to the range soon.
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Our picks

    • 2024 RBC Heritage - Discussion and Links to Photos
      Please put any questions or comments here
       
       
       
       
       
      General Albums
       
      2024 RBC Heritage - Monday #1
      2024 RBC Heritage - Monday #2
       
       
       
       
      WITB Albums
       
      Justin Thomas - WITB - 2024 RBC Heritage
      Justin Rose - WITB - 2024 RBC Heritage
      Chandler Phillips - WITB - 2024 RBC Heritage
      Nick Dunlap - WITB - 2024 RBC Heritage
      Thomas Detry - WITB - 2024 RBC Heritage
      Austin Eckroat - WITB - 2024 RBC Heritage
       
       
       
       
       
      Pullout Albums
       
      Wyndham Clark's Odyssey putter - 2024 RBC Heritage
      JT's new Cameron putter - 2024 RBC Heritage
      Justin Thomas testing new Titleist 2 wood - 2024 RBC Heritage
      Cameron putters - 2024 RBC Heritage
      Odyssey putter with triple track alignment aid - 2024 RBC Heritage
      Scotty Cameron The Blk Box putting alignment aid/training aid - 2024 RBC Heritage
       
       
       
       
       
       
      • 0 replies
    • 2024 Masters - Discussion and Links to Photos
      Huge shoutout to our member Stinger2irons for taking and posting photos from Augusta
       
       
      Tuesday
       
      The Masters 2024 – Pt. 1
      The Masters 2024 – Pt. 2
      The Masters 2024 – Pt. 3
      The Masters 2024 – Pt. 4
      The Masters 2024 – Pt. 5
      The Masters 2024 – Pt. 6
      The Masters 2024 – Pt. 7
      The Masters 2024 – Pt. 8
      The Masters 2024 – Pt. 9
      The Masters 2024 – Pt. 10
       
       
       
        • Like
      • 14 replies
    • Rory McIlroy testing a new TaylorMade "PROTO" 4-iron – 2024 Valero Texas Open
      Rory McIlroy testing a new TaylorMade "PROTO" 4-iron – 2024 Valero Texas Open
        • Like
      • 92 replies
    • 2024 Valero Texas Open - Discussion and Links to Photos
      Please put any questions or Comments here
       
       
       
      General Albums
       
      2024 Valero Texas Open - Monday #1
      2024 Valero Texas Open - Tuesday #1
       
       
       
       
       
      WITB Albums
       
      Ben Taylor - WITB - 2024 Valero Texas Open
      Paul Barjon - WITB - 2024 Valero Texas Open
      Joe Sullivan - WITB - 2024 Valero Texas Open
      Wilson Furr - WITB - 2024 Valero Texas Open
      Ben Willman - SoTex PGA Section Champ - WITB - 2024 Valero Texas Open
      Jimmy Stanger - WITB - 2024 Valero Texas Open
      Rickie Fowler - WITB - 2024 Valero Texas Open
      Harrison Endycott - WITB - 2024 Valero Texas Open
      Vince Whaley - WITB - 2024 Valero Texas Open
      Kevin Chappell - WITB - 2024 Valero Texas Open
      Christian Bezuidenhout - WITB (mini) - 2024 Valero Texas Open
      Scott Gutschewski - WITB - 2024 Valero Texas Open
      Michael S. Kim WITB – 2024 Valero Texas Open
       
       
       
      Pullout Albums
       
      Cameron putter - 2024 Valero Texas Open
      Ben Taylor with new Titleist TRS 2 wood - 2024 Valero Texas Open
      Swag cover - 2024 Valero Texas Open
      Greyson Sigg's custom Cameron putter - 2024 Valero Texas Open
      Davis Riley's custom Cameron putter - 2024 Valero Texas Open
      Josh Teater's custom Cameron putter - 2024 Valero Texas Open
      Hzrdus T1100 is back - - 2024 Valero Texas Open
      Mark Hubbard testing ported Titleist irons – 2024 Valero Texas Open
      Tyson Alexander testing new Titleist TRS 2 wood - 2024 Valero Texas Open
      Hideki Matsuyama's custom Cameron putter - 2024 Valero Texas Open
      Cobra putters - 2024 Valero Texas Open
      Joel Dahmen WITB – 2024 Valero Texas Open
      Axis 1 broomstick putter - 2024 Valero Texas Open
      Rory McIlroy testing a new TaylorMade "PROTO" 4-iron – 2024 Valero Texas Open
      Rory McIlroy's Trackman numbers w/ driver on the range – 2024 Valero Texas Open
       
       
       
      • 4 replies
    • 2024 Texas Children's Houston Open - Discussion and links to Photos
      Please put any questions or Comments here
       
       
       
      General Albums
       
      2024 Texas Children's Houston Open - Monday #1
      2024 Texas Children's Houston Open - Monday #2
      2024 Texas Children's Houston Open - Tuesday #1
      2024 Texas Children's Houston Open - Tuesday #2
      2024 Texas Children's Houston Open - Tuesday #3
       
       
       
       
      WITB Albums
       
      Thorbjorn Olesen - WITB - 2024 Texas Children's Houston Open
      Ben Silverman - WITB - 2024 Texas Children's Houston Open
      Jesse Droemer - SoTX PGA Section POY - WITB - 2024 Texas Children's Houston Open
      David Lipsky - WITB - 2024 Texas Children's Houston Open
      Martin Trainer - WITB - 2024 Texas Children's Houston Open
      Zac Blair - WITB - 2024 Texas Children's Houston Open
      Jacob Bridgeman - WITB - 2024 Texas Children's Houston Open
      Trace Crowe - WITB - 2024 Texas Children's Houston Open
      Jimmy Walker - WITB - 2024 Texas Children's Houston Open
      Daniel Berger - WITB(very mini) - 2024 Texas Children's Houston Open
      Chesson Hadley - WITB - 2024 Texas Children's Houston Open
      Callum McNeill - WITB - 2024 Texas Children's Houston Open
      Rhein Gibson - WITB - 2024 Texas Children's Houston Open
      Patrick Fishburn - WITB - 2024 Texas Children's Houston Open
      Peter Malnati - WITB - 2024 Texas Children's Houston Open
      Raul Pereda - WITB - 2024 Texas Children's Houston Open
      Gary Woodland WITB (New driver, iron shafts) – 2024 Texas Children's Houston Open
      Padraig Harrington WITB – 2024 Texas Children's Houston Open
       
       
       
       
      Pullout Albums
       
      Tom Hoge's custom Cameron - 2024 Texas Children's Houston Open
      Cameron putter - 2024 Texas Children's Houston Open
      Piretti putters - 2024 Texas Children's Houston Open
      Ping putter - 2024 Texas Children's Houston Open
      Kevin Dougherty's custom Cameron putter - 2024 Texas Children's Houston Open
      Bettinardi putter - 2024 Texas Children's Houston Open
      Cameron putter - 2024 Texas Children's Houston Open
      Erik Barnes testing an all-black Axis1 putter – 2024 Texas Children's Houston Open
      Tony Finau's new driver shaft – 2024 Texas Children's Houston Open
       
       
       
       
       
      • 13 replies

×
×
  • Create New...