#Releasetheputter - The Method Appreciation and Info Thread - (NO BST)

[Need4spd]

I had picked up a brand new 001 from Van’s on clearance for a buck fifty in 2015. Wish I had kept it. If I could find one that wasn’t thrashed I would gladly add it to the collection. They always have one or two at the 2nd Swing in Scottsdale and I love the blockiness of the design.

[wldchld22]

Looks like Dallas golf still has some Oven holdovers. They keep calling me. Someone buy them!

[PureDivots]

Looks like Dallas golf still has some Oven holdovers. They keep calling me. Someone buy them!

Where are you seeing them at? I don’t see anything online.

[BYK]

Looks like Dallas golf still has some Oven holdovers. They keep calling me. Someone buy them!

Where are you seeing them at? I don’t see anything online.

 

https://www.dallasgolf.com/nike-method-003w-oven-prototype-putter-34-rh/

[Sanzabar]

Every time this thread pops up, I am reminded how much I freaking love the Method putters. I’ll never get rid of the 001.

[MKPAPA]

Love my 001 just ordered one of Dallas Golf's "Naked" B1-01 Origin's and probably gonna switch out the shafts in both to stepless. Any recommendations?

I think i'll be letting go of my "Naked" B2-01 Origin on the BST's soon

[cvhookem63]

Love my 001 just ordered one of Dallas Golf's "Naked" B1-01 Origin's and probably gonna switch out the shafts in both to stepless. Any recommendations?

I think i'll be letting go of my "Naked" B2-01 Origin on the BST's soon

 

Did this picture they posted yesterday convince you to buy another one? ha

 

[MKPAPA]

Love my 001 just ordered one of Dallas Golf's "Naked" B1-01 Origin's and probably gonna switch out the shafts in both to stepless. Any recommendations?

I think i'll be letting go of my "Naked" B2-01 Origin on the BST's soon

 

Did this picture they posted yesterday convince you to buy another one? ha

 

 

haha Naw. I've been wanting a B1-01 Naked. Technically I bought it from one of their affiliates (Sticks_and_stones) and already own a Naked B2-01. I've come to the realization that I only like the B1-01 / 001 / Tiempo headstyle.

 

After I get rid of my B2-01 I'll have three putters all based off the same design and that to me is pretty cool.

[BlackM00Nlight]

I want a naked B1-01 34” Origin I think. I’d put a small black tape line in the top and see how I like that vs a flange line

[cqueen]

Did they make the B2-05 in the Origin models? I have it in the method matter but would love an origin version.

[Puttersaurus Rex]

Did they make the B2-05 in the Origin models? I have it in the method matter but would love an origin version.

 

Yes, B1-05 and B2-05

[dlamb83]

I still roll my b2-02 counterflex from time to time in my house. Never gamed it or even had it on a golf course putting green. I even put the ust frequency filter shaft in it and cut it down to 34”. Still love the way a method rolls. Also love that the head weighed exactly 363 grams as Nike stated the counterflex should weigh.

[Tx_Bomber003]

I finally found a method 001 and added it to the collection!

[MKPAPA]

Back to Front: Unitized Tiempo, Origin B1-01, Method 001 "RC"

PS: I want to murder these out..who can do it

 

[BlackM00Nlight]

I asked around with my Origin, no one will touch it

[MKPAPA]

I asked around with my Origin, no one will touch it

 

Yeah Norcalputters won't touch my origin either. Id love to get the Tiempo DLC'd but would want to do the whole club since the neck and shaft are welded together.

[cvhookem63]

I asked around with my Origin, no one will touch it

 

Yeah Norcalputters won't touch my origin either. Id love to get the Tiempo DLC'd but would want to do the whole club since the neck and shaft are welded together.

 

If you got it apart they might be able to do something with it, but the RZN grooves are going to be an issue with the face no matter what.

 

[Lesmond]

I should use my origin again soon. I switch better those and the Rory 006 ever so often.

 

But I recently got a 2014 Newport with 2x 30g weight on the sole and its feeling pretty good. I guess those 3 putters in the rotation for me.

[Z1ggy16]

Is $115 a good price for a 001 that's a little beat up? I want a silver finish putter just for the heck of it and this is one of the few heads in left hand that has top line alignment and not flange lines.

 

Very hard to find any in good shape... most a bit beat up. I did manage to find a mint one for 120 pound but... that's in the UK so I imagine after exchange rate and shipping, I'll be close to $200.

[rukahs]

:wub:

 

 

 

 

[MKPAPA]

Is $115 a good price for a 001 that's a little beat up? I want a silver finish putter just for the heck of it and this is one of the few heads in left hand that has top line alignment and not flange lines.

 

Very hard to find any in good shape... most a bit beat up. I did manage to find a mint one for 120 pound but... that's in the UK so I imagine after exchange rate and shipping, I'll be close to $200.

 

$115 seems high to me. Is it as beat as the TW 001 above?

[MKPAPA]

I should use my origin again soon. I switch better those and the Rory 006 ever so often.

 

But I recently got a 2014 Newport with 2x 30g weight on the sole and its feeling pretty good. I guess those 3 putters in the rotation for me.

 

Sounds look a solid roatation.

I've found the Origin to be the best of my 3 putters, on a slow green, the Tiempo for hard/fast, and the 001 somewhere in between.

[Z1ggy16]

Is $115 a good price for a 001 that's a little beat up? I want a silver finish putter just for the heck of it and this is one of the few heads in left hand that has top line alignment and not flange lines.

 

Very hard to find any in good shape... most a bit beat up. I did manage to find a mint one for 120 pound but... that's in the UK so I imagine after exchange rate and shipping, I'll be close to $200.

 

$115 seems high to me. Is it as beat as the TW 001 above?

Bottom looks better but the top is about in that shape. Thing is... even if I Can get one for $100, the time/money spend to polish it up might cost more than the $$ to get the mint one from the UK.

 

It also doesn't help that supply is low and demand probably high for them in LH. This is one of those cases where being lefty probably hurts me when it comes to value.

[Mystery252]

edit: deleted

[Sanzabar]

Picked up a naked B1-01 and I’m going to send it off to have a sight dot added. Any recommendations on who can do it? Putter Spa was my first thought..

 

Gonna add a sight dot and black shaft and game the heck out of it!

[ss87]

Just picked this guy up in Excellent used condition off Ebay for $40+$12 shipping. My first Method. Any grip suggestions? It comes w/ stock.

 

 

 

[Lesmond]

Rory 006 putter oh eBay.

 

https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F352597712264

[K13]

Picked up a naked B1-01 and I’m going to send it off to have a sight dot added. Any recommendations on who can do it? Putter Spa was my first thought..

 

Gonna add a sight dot and black shaft and game the heck out of it!

 

Know it's a little late on this one but I'd recommend Putter Spa. Know I've read a few mixed experience from a few years ago, but mine a few months ago was great.

 

They're local for me and I had a chance to go in. They're a family owned shop that's growing. Knowing that, it's not too surprising that maybe there are a couple rough ones when they were starting a few years back. As an aside, they're also Carbon Putters if you weren't aware - so they can do just about anything you can dream up.

[Sanzabar]

Picked up a naked B1-01 and I'm going to send it off to have a sight dot added. Any recommendations on who can do it? Putter Spa was my first thought..

 

Gonna add a sight dot and black shaft and game the heck out of it!

 

Know it's a little late on this one but I'd recommend Putter Spa. Know I've read a few mixed experience from a few years ago, but mine a few months ago was great.

 

They're local for me and I had a chance to go in. They're a family owned shop that's growing. Knowing that, it's not too surprising that maybe there are a couple rough ones when they were starting a few years back. As an aside, they're also Carbon Putters if you weren't aware - so they can do just about anything you can dream up.

 

That is exactly who I went with. Pretty simple work and he had done a putter for me before, so I feel pretty good about him doing it. It should be back in the next 2 weeks or so.

[nova6868]

Love my 001 just ordered one of Dallas Golf's "Naked" B1-01 Origin's and probably gonna switch out the shafts in both to stepless. Any recommendations?

I think i'll be letting go of my "Naked" B2-01 Origin on the BST's soon

 

Did this picture they posted yesterday convince you to buy another one? ha

 

 

This is very tempting. Really like that the weights are 340-345 range. Only issue is the sight-line - I just don't like how the line looks on these. Would love to find a naked one.