SeeMore Putters - Anyone?

[SeeMore Putters]

Just got a steal on a Nashville ONEss on the bay. Perfect length & lie and with a rosemark grip too! Really looking forward to testing it against my current scotty 2.6

 

let us know who wins out!

 

Let us know! that ONEss is a gamer!!

[dlanerie]

Left eye dominant right hand player here, picked up a FGP original off of 2nd swing on a whim after some wrx research last night. Anxious to try, will be here in a few days.

[jokerusn]

My son keeps trying to use my mfgp deep flange and I keep taking it away. I think I'm going to have to get him a seemore of his own.

[IrishGolfer14]

Does anyone happen to know what the toe hang is on the PTM3, and how it compares in size to the Si5?

[Maximilian]

Does anyone happen to know what the toe hang is on the PTM3, and how it compares in size to the Si5?

It’s about 4:30, very similar to an Anser. Quite a bit smaller than the Si5.

[evoviiiyou]

The best putter method that have lasted over my Spiders, Machines and anything in between. These guys helped me get a older M1B (Belly putter) and get the lie right for playing it at 30.25" and never looked back. 385gram head with a 10 gram tip weight and its money at this length for my SBST stroke. Had it custom finished at Continental Golf satin black, blue RST, gloss black paint fill and white lines. Love her!

 

[PixlPutterman]

Hate to revive a dead thread, but this thread caused me to pick up 3 Seemore, should be in this week.

 

Will have to be some carpet putts since we have snow on the ground 🙂

[SeeMore Putters]

5 hours ago, PixlPutterman said:

Hate to revive a dead thread, but this thread caused me to pick up 3 Seemore, should be in this week.

 

Will have to be some carpet putts since we have snow on the ground 🙂

Sounds fantastic!  Happy to help with any questions that you might have.  Welcome to the family.  Great information here along with contact us anytime at [email protected] (Franklin, TN).  

[PixlPutterman]

8 minutes ago, SeeMore Putters said:

Sounds fantastic!  Happy to help with any questions that you might have.  Welcome to the family.  Great information here along with contact us anytime at [email protected] (Franklin, TN).  

 

 

I know one of the first things Ill have to get use to is the non offset. Played a plumbers neck for YEARS.

 

Any tips on that? Ball positioning, ect? I have always been a low hands, flat lie angle guy so Ill have to adjust for that 🙂

 

[OspreyCI]

Crazy I started this thread over 4 years ago and it is still going strong. 
 

Seemore FGP is still my favorite. No clue why I don’t game one. Every time I go to the golf store I putt with one and make everything. They make the best feeling putters! 

[PixlPutterman]

2 hours ago, OspreyCI said:

Crazy I started this thread over 4 years ago and it is still going strong. 
 

Seemore FGP is still my favorite. No clue why I don’t game one. Every time I go to the golf store I putt with one and make everything. They make the best feeling putters! 

So you're too blame for me buying 3 putters in one day

[Medson]

I like SeeMore a lot. It’s currently not in my rotation, but I do have one on the bench. 
 

You gotta have a SeeMore for the “rainy” days when your aim and setup are completely off. 

[SeeMore Putters]

On 12/14/2020 at 3:27 PM, PixlPutterman said:

 

 

I know one of the first things Ill have to get use to is the non offset. Played a plumbers neck for YEARS.

 

Any tips on that? Ball positioning, ect? I have always been a low hands, flat lie angle guy so Ill have to adjust for that 🙂

Take a look at this video (especially very beginning) - Click HERE - Putting Tips.  Great tip on ball position and much more.

 

Also here is one more video on the Importance of Ball Position - click here.

Edited December 16, 2020 by SeeMore Putters

[Myherobobhope]

Putting is my focus for 2021... I’m driving distance from seemore, so I’m headed out there in January.

 

had an awesome conversation with Brandon, and I’m looking forward to the full Sam assessment with Cody.

 

everyone at the company has been fantastic to deal with!

[OspreyCI]

1 hour ago, Myherobobhope said:

Putting is my focus for 2021... I’m driving distance from seemore, so I’m headed out there in January.

 

had an awesome conversation with Brandon, and I’m looking forward to the full Sam assessment with Cody.

 

everyone at the company has been fantastic to deal with!

Please let us know how it goes. Would be awesome  to go there. 

[Myherobobhope]

Just now, OspreyCI said:

Please let us know how it goes. Would be awesome  to go there. 

Most definitely... I will write a long article once I’m done.

[PixlPutterman]

Well, here's hoping for nice weather the next few days...

[SeeMore Putters]

8 hours ago, PixlPutterman said:

Well, here's hoping for nice weather the next few days...

 

great looking gamers!!  Well done!

[PixlPutterman]

6 hours ago, SeeMore Putters said:

 

great looking gamers!!  Well done!

Do you all or did you ever, make a One SS head that wasnt true center shaft. My eye is REALLY liking this head but I typically like a bit of toe hang. The Z3C feels great in the hand (being not cent shaft), I just prefer the simpler look of the One SS

Edited December 17, 2020 by PixlPutterman

[NativeTxn]

I'm always a few mouse clicks from ordering a Mini Giant Deep Flange. Just haven't pulled the trigger yet.

[Myherobobhope]

4 hours ago, NativeTxn said:

I'm always a few mouse clicks from ordering a Mini Giant Deep Flange. Just haven't pulled the trigger yet.

And you call yourself a Texan? What would Stephen f Austin say? Pull the trigger. Do it for Texas!

[SeeMore Putters]

20 hours ago, PixlPutterman said:

Do you all or did you ever, make a One SS head that wasnt true center shaft. My eye is REALLY liking this head but I typically like a bit of toe hang. The Z3C feels great in the hand (being not cent shaft), I just prefer the simpler look of the One SS

The mini giant DF might be your best look for near-center shaft - here.

[PixlPutterman]

2 hours ago, SeeMore Putters said:

The mini giant DF might be your best look for near-center shaft - here.

 Thats close, but man the lines are just so clean on the One SS 🙂

[Maverick22]

I’m intrigued by the Seemores, but I’m a lefty (in Canada) and the stores here never have the LHs in to try.  I putted for years with a bullseye and loved it for alignment due to the centre shaft (and also for short putts, though the lower forgiveness was not great on longer putts). However, i moved away from it years ago and have shuffled between manu different models and styles since.  I’m thinking I’d like to try a centre shafted blade again, preferably not too heavy, so Seemore seems to fit the bill. Which models would you recommend?  I think maybe the FGP, FGP20, mFGP (carbon steel) would suit my eye.  How much more forgiving are the mFGP and FGP20 than the FGP original?  Anything other models I should look at?  Thanks for any info?

[pgetzen]

On 12/17/2020 at 3:25 PM, NativeTxn said:

I'm always a few mouse clicks from ordering a Mini Giant Deep Flange. Just haven't pulled the trigger yet.

I just got back to Seemore after a hiatus. Went with the Mini Giant DF and it is amazing. Easy to line up and very forgiving on the long putts!

[Myherobobhope]

On 12/16/2020 at 3:40 PM, OspreyCI said:

Please let us know how it goes. Would be awesome  to go there. 

Long write up on my experience is posted in the sponsors thread up top... very pleased with the experience. Cody was awesome. Fitting was awesome. I’m excited to get my new putter and picked up a training mat that seems really intuitive (it was also $30 or so, which is wonderfully priced for a good training aid)

 

Their home office isn’t a Mecca of putting or anything, it’s just a an office with a warehouse... the people inside that office and the putters they build are awesome.

 

$150 for a fitting was worth it... getting on a Sam and time spent with a guy who knows his stuff was super helpful...

 

I’ll follow up with a long term write up after I’ve gotten practice and played some rounds.

[SeeMore Putters]

On 1/16/2021 at 11:31 PM, Maverick22 said:

I’m intrigued by the Seemores, but I’m a lefty (in Canada) and the stores here never have the LHs in to try.  I putted for years with a bullseye and loved it for alignment due to the centre shaft (and also for short putts, though the lower forgiveness was not great on longer putts). However, i moved away from it years ago and have shuffled between manu different models and styles since.  I’m thinking I’d like to try a centre shafted blade again, preferably not too heavy, so Seemore seems to fit the bill. Which models would you recommend?  I think maybe the FGP, FGP20, mFGP (carbon steel) would suit my eye.  How much more forgiving are the mFGP and FGP20 than the FGP original?  Anything other models I should look at?  Thanks for any info?

If you have a few minutes give us a call at 615-435-8015.  More than happy to help and discuss.  FGP20 and mFGP are fantastic gamers.

[SeeMore Putters]

On 1/17/2021 at 7:55 AM, Myherobobhope said:

Long write up on my experience is posted in the sponsors thread up top... very pleased with the experience. Cody was awesome. Fitting was awesome. I’m excited to get my new putter and picked up a training mat that seems really intuitive (it was also $30 or so, which is wonderfully priced for a good training aid)

 

Their home office isn’t a Mecca of putting or anything, it’s just a an office with a warehouse... the people inside that office and the putters they build are awesome.

 

$150 for a fitting was worth it... getting on a Sam and time spent with a guy who knows his stuff was super helpful...

 

I’ll follow up with a long term write up after I’ve gotten practice and played some rounds.

Thanks again for taking time to come visit us.  Always happy to help anytime! Keep us posted on your journey.

[Myherobobhope]

19 minutes ago, SeeMore Putters said:

Thanks again for taking time to come visit us.  Always happy to help anytime! Keep us posted on your journey.

Just waiting on the shipping notice!

 

mat has already gotten lots of use.

[SeeMore Putters]

20 hours ago, Myherobobhope said:

Just waiting on the shipping notice!

 

mat has already gotten lots of use.

Should be getting one very soon!!  Let us know when it arrives.