PXG 0211 irons - what do you think?

[pollock21]

> @balls_deep said:

> Lordy those things are big. I thought the 790 was chunky! Thanks for posting those pics.

 

I didn’t expect them to be blade like. Top lines actually look a little better than the 790 in the pics and I don’t mind the 790 in person. Blade length looks a tad long but honestly not too bad at address. Looking at the sole views I thought they’d look longer than they actually do at address.

 

 

[pollock21]

@Dunny51 did you go with the elevate shafts?

[Dunny51]

> @pollock21 said:

> @Dunny51 did you go with the elevate shafts?

 

Yea I went with the 95. With a midsize grip they feel heavier to me than P790 w DG105. My fitter also told me the elevate plays a little stiffer than the DG105.

[JohnKHawk]

Received my single 7 iron couple days ago. Been raining for weeks here in the northeast so I haven't been able to spend a lot of time testing it out so these are basically my first impressions. First off my personal opinion is it looks great. As seen in photo's already posted in this thread blade length is slightly longer than the P790 as well as my Apex 19 7 iron. I would not want the 0211 blade any longer than it already is though. Any longer I would begin to not like the appearance. The top line is thinner than the Apex 19 & looks pretty similar to the i500 top line. The feel off the few shots I've hit is very nice. Slightly softer than the Apex 19 & a good bit softer than the i500 in my opinion. The sound is so subjective that all I can say is it's not offensive & I have no issues with it. Further testing is in order but I'm already thinking of ordering the rest of these irons. Like I need another set of irons. LOL.

[Dunny51]

Raining all day here but tried to get a good picture at address with a ball. Much respect to the guys who always post these types of pictures bc it’s not as easy as it looks especially with an older phone. Again 5, 7, PW, and GW. Or PW, GW, 5, 7 as they showed up out of order again

 

[pollock21]

Those look great by the ball!

[OspreyCI]

Picking up a 4 iron to go with my P790 set. $50 cheaper per club than the P790 thru Hero’s Program. I demo’d 0211’s at my PXG fitting and I loved them. If I didn’t just get a Gen 2 driver and Putter, the 0211’s would be in the bag.

[rbilramz]

> @OspreyCI said:

> Picking up a 4 iron to go with my P790 set. $50 cheaper per club than the P790 thru Hero’s Program. I demo’d 0211’s at my PXG fitting and I loved them. If I didn’t just get a Gen 2 driver and Putter, the 0211’s would be in the bag.

 

How would you compare the 0211 to your P790’s top to bottom? Size, feel, etc.

[Golftro]

> @nDroid3 said:

> Got mine for the $125 and noticed it went down to $115. Called PXG and they gave me a refund on the difference.

Ordered my set of 0211s with Elevate Tours at $115/each then saw they went down to $105, called my fitter and he refunded the difference. If y’all are interested, pull the trigger now, $735/set is a steal. Also, used my dad’s military discount since the fitter said they don’t advertise it but the discount applies to immediate family.

[OspreyCI]

> @Golftro said:

> > @nDroid3 said:

> > Got mine for the $125 and noticed it went down to $115. Called PXG and they gave me a refund on the difference.

> Ordered my set of 0211s with Elevate Tours at $115/each then saw they went down to $105, called my fitter and he refunded the difference. If y’all are interested, pull the trigger now, $735/set is a steal. Also, used my dad’s military discount since the fitter said they don’t advertise it but the discount applies to immediate family.

 

Almost the same thing happened to me. Ordered an 0211 4 iron for $125 and saw Friday that they have dropped to $105 a club (smoking deal btw). I called and they said they couldn’t refund my difference, but asked what I needed. Told them I wanted a PXG Visor and they said no problem. Good stuff!

 

I imagine my P790’s being replaced with the 0211’s. Can’t wait to get the 4 and give it a go. I loved the 7 iron dying a demo.

[rjp322]

Yep in same boat. Went down for me as well and they would not refund anything. They did offer me a hat or shirt but I declined. Told them I was debating buying a 3 wood and would love any sort of credit towards that and they said no

[JDMRN81]

I can’t believe I missed the $105 price. I’ve been checking almost daily and almost pulled the trigger at $115. Now they’re at $130 and the retail price has jumped $25 ($220). I had a chance to demo at my course beside my gamers (i500) and performance was basically a wash (4i, 7i, and PW). The 0211’s were slightly better feeling and sounding. The club HO in me wants new irons and $105 probably would have sealed the deal, but I’m having a hard time justifying the difference in cost at anything higher then that (will take a huge hit on selling i500’s).

[Dpak05]

> @JDMRN81 said:

> I can’t believe I missed the $105 price. I’ve been checking almost daily and almost pulled the trigger at $115. Now they’re at $130 and the retail price has jumped $25 ($220). I had a chance to demo at my course beside my gamers (i500) and performance was basically a wash (4i, 7i, and PW). The 0211’s were slightly better feeling and sounding. The club HO in me wants new irons and $105 probably would have sealed the deal, but I’m having a hard time justifying the difference in cost at anything higher then that (will take a huge hit on selling i500’s).

 

Where are you seeing these prices? I still see the $105 on the website.

[JDMRN81]

> @Dpak05 said:

> > @JDMRN81 said:

> > I can’t believe I missed the $105 price. I’ve been checking almost daily and almost pulled the trigger at $115. Now they’re at $130 and the retail price has jumped $25 ($220). I had a chance to demo at my course beside my gamers (i500) and performance was basically a wash (4i, 7i, and PW). The 0211’s were slightly better feeling and sounding. The club HO in me wants new irons and $105 probably would have sealed the deal, but I’m having a hard time justifying the difference in cost at anything higher then that (will take a huge hit on selling i500’s).

>

> Where are you seeing these prices? I still see the $105 on the website.

 

I just checked on my computer and it’s saying $105. My phone is saying $130 but then I checked and somehow my shafts were changed from the elevates to DG 120’s.

 


 

[OspreyCI]

$105 is a smoking deal for these!

[serveitup911]

It is uncanny how much PXGs look like Pings from address. You can really see their engineers’ heritage.

[Spaulding S.]

Are the 0211’s, being cast, going to be more resistant to bag chatter than the 0311’s? I really like my Gen 1s but after 8 months they are pretty beat up and I am pretty careful to take care of them.

[JDMRN81]

> @"Spaulding S." said:

> Are the 0211’s, being cast, going to be more resistant to bag chatter than the 0311’s? I really like my Gen 1s but after 8 months they are pretty beat up and I am pretty careful to take care of them.

They should hold up way better. That's the only thing I don't like about fully forged irons.

 

 

[snagy2000]

Irons are like blue collar workers...They have a tough job which requires them getting dirty and banged up...If they were suppose to stay pretty, they would come with head covers like those pretty little woods/hybrids...

[ssfranny]

Well now they have a smoking deal on these 0211s are $105 a club and for a limited time when you buy 6 irons you get a gen1 driver free thats a crazy deal! I have Gen1s but couldnt pass this up!

[JDMRN81]

Yeah I cancelled my order from the 2nd and reordered (made a few changes as well) to get the free driver. Anybody hit with the MMT graphite shafts? I know they’re a little light but when I demoed the only graphite shaft I tried was the Accra 90i.

[benthegolfer]

 

 

> @ssfranny said:

> Well now they have a smoking deal on these 0211s are $105 a club and for a limited time when you buy 6 irons you get a gen1 driver free thats a crazy deal! I have Gen1s but couldnt pass this up!

 

Is this heroes program only or anyone?

 

Thx

[rbilramz]

> @benthegolfer said:

>

>

> > @ssfranny said:

> > Well now they have a smoking deal on these 0211s are $105 a club and for a limited time when you buy 6 irons you get a gen1 driver free thats a crazy deal! I have Gen1s but couldnt pass this up!

>

> Is this heroes program only or anyone?

>

> Thx

 

Heroes

[JD3]

They look better than their forged Frankenstein head models with all the bolts on the back. That design never looked good or even premium to me....looked unfinished, like a prototype or fitting club with sleeve adapter, etc. New one looks nice and sleek, I'll give it that.

[rjp322]

I had gotten mine 9 days ago. They wouldn’t refund any money but they did go ahead and give me the driver for shipping which I’m very happy about. Thanks PXG

[Flat4Boxer]

These look to be very similar to the G700's I bought last year which has piqued my interest. Backstory on my G700's: went to a fitting session and landed on them with KBS TGI 60 shafts. Decided to save some coin and just pick up a set of the 700's with the stock CB Alta R, which are 72g and just call it a day. They have been fantastic for me, but at the hero's pricing on these with KBS TGI 70 as an option, I may be tempted to give them a try. Anyone happen to know the difference between that CB Alta and KBS TGI'S?

[Spaulding S.]

Just ordered 0211’s 4-GW with the MMT graphite shafts, my first go w/ graphite. Also ordered a 0317x hybrid 17 deg. w/ the MMT shaft. And of course the Gen 1 XF driver w an Evenflow is coming along as well.

[JDMRN81]

> @"Spaulding S." said:

> Just ordered 0211’s 4-GW with the MMT graphite shafts, my first go w/ graphite. Also ordered a 0317x hybrid 17 deg. w/ the MMT shaft. And of course the Gen 1 XF driver w an Evenflow is coming along as well.

 

Did you demo the MMT shaft before purchasing? I only tried the elevates 95's and accra 90i's at my demo, wanted to try the MMT's but they're a little lighter then I prefer.

[PoeKingShankspeare]

I'm really enjoying my 0311's , just a solid piece for me. I currently purchased the 0211's with the free driver (0811 LX w/ Evenflow).. I normally don't purchase irons without getting fitted or at least testing them out first. But this deal I couldn't pass up.

[Spaulding S.]

> @JDMRN81 said:

> > @"Spaulding S." said:

> > Just ordered 0211’s 4-GW with the MMT graphite shafts, my first go w/ graphite. Also ordered a 0317x hybrid 17 deg. w/ the MMT shaft. And of course the Gen 1 XF driver w an Evenflow is coming along as well.

>

> Did you demo the MMT shaft before purchasing? I only tried the elevates 95's and accra 90i's at my demo, wanted to try the MMT's but they're a little lighter then I prefer.

 

I didn’t hit them first, so I am a little anxious. But I did call PXG and discuss with one of the guys and feel pretty sure they will work well for me.

 

Also, I would encourage anyone considering taking advantage of the free driver deal to call as there are other shaft options not listed on the website available as stock. I was told I could get a Tensei CK Pro Blue as an option, but I have that shaft in my Gen 2 and the adapters are interchangeable so I will have both shafts for both heads.