***ATTENTION***IMPORTANT ANNOUNCEMENT***ATTENTION***IMPORTANT ANNOUNCEMENT***ATTENTION

Last year, in an effort to improve the capability of our forums, we switched to new software. We expected tremendous scalability and rapid customization that would significantly improve each Member's experience across multiple devices and integrate flawlessly with social media platforms.

Unfortunately, after a significant capital expense, we have decided that the length of time and the additional cost to reach our goals make this enterprise untenable.

Thus, we have made the difficult decision to transition the forums to our original software platform. We’re excited that, in the nearly two years since we began the process of our most recent switch, our original platform has been upgraded significantly, and we are confident that the reversion will not only provide the stability that we desperately needed prior to our last move but will also return to the Membership the high level of customization that made our online community so great. We have also added technical resources to the GolfWRX staff that will allow us to build custom modules and modifications that we are confident will take the forums to the next level.

We remain the world's largest online golf community, and we still hold true to our core values and mission statement as written in 2005. Bearing both of those elements in mind, being the best and offering our Members a platform that is world-class are both requirements, not options, and it is that spirit that has motivated this decision.

So, please pardon our mess over the next five days or so while we transition the forums.

A few important notes: Current content will be accessible during that time, but the forums will be READ ONLY, and you will not be able to start new threads or reply to posts. Personal Messaging is enabled but PMs sent/received from the time the board was frozen will not carry over. We know this is inconvenient, and we apologize, and we greatly appreciate GolfWRXers bearing with us through the transition.

We are very excited about starting this next chapter for GolfWRX and getting back to the high-quality Member experience we all expect as soon as possible.

Diamana ZF

 autronicdsm ·  
autronicdsmautronicdsm Members  820WRX Points: 112Handicap: 999Posts: 820 Golden Tee
Joined:  edited Jul 1, 2019 in WRX Club Techs #1

Link to press release http://www.mitsubishichemicalgolf.jp/pdf/MCC_jp_1561947815.pdf
From google translate I believe it says this will be the stiffest tip in this generation of Diamana.

Posted:
«1345
5

Comments

  • ValtielValtiel Konica-Minolta Bizhub Members  4022WRX Points: 2,028Handicap: 1.7Posts: 4,022 Titanium Tees
    Joined:  #2

    I'm going to take a guess and say that based on the graphics and the fact that the chart says "Mid-High" kickpoint that this might just be a JDM version of the DF. Just a hunch though.

    Posted:
    Mizuno ST190 9.5* Diamana X'17 70XX || Taylormade M1 430 8.5* Tensei Pro Orange V2 70TX
    Titleist 915FD 15* Kuro Kage 80XTS || Taylormade RSI UDI 16* Fujikura Motore Speeder HB 9.8 Tour-Spec X
    Titleist 915FD 18* Kuro Kage 90XTS || Titleist 818H1 18.25* Diamana Kai'li s103x Prototype 
    Callaway X-Forged UT 20* Kuro Kage XT 100TX Hybrid
    Callaway X-Forged UT 23* Brunswick Precision Rifle FCM 7.0
    Bridgestone J40 DPC 5i-7i 27*- 35* Brunswick Precision Rifle FCM 7.0
    Bridgestone J40 CB 8i-PW 39*- 48* Brunswick Precision Rifle FCM 7.0
    Vokey Mild Raw 8620 54* Brunswick Precision Rifle FCM 7.0
    Vokey SM6 58* Oil Can Low Bounce K-Grind Brunswick Precision Rifle FCM 7.0
    Vokey Special 61* Black Oxide V-Grind Brunswick Precision Rifle FCM 7.0
    Scotty Cameron Newport Tour Red Dot

    WITB Thread
  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • phatchrisrulesphatchrisrules Southern Ontario, CanadaUnregistered  2130WRX Points: 395Handicap: 6.5Posts: 2,130 Platinum Tees
    Joined:  #3

    On -, @Valtiel said:

    I'm going to take a guess and say that based on the graphics and the fact that the chart says "Mid-High" kickpoint that this might just be a JDM version of the DF. Just a hunch though.

    Or maybe a replacement for the X'17? According to the X'17 spec sheets it matched up kind of close. But my money is on your JDM version though.

    Posted:

    Taylormade R510TP - Speeder 757
    Sonartec NP-99 14* and 17* - NV Green 85
    Nickent Genex 3DX 21* - Dynamic Gold SL
    Titleist 660 4-P - Dynamic Gold
    Cleveland 54* and 59* - Dynamic Gold
    Scotty Cameron Teryllium

  • BearQBearQ Members  3667WRX Points: 855Posts: 3,667 Titanium Tees
    Joined:  #4

    On -, @Valtiel said:

    I'm going to take a guess and say that based on the graphics and the fact that the chart says "Mid-High" kickpoint that this might just be a JDM version of the DF. Just a hunch though.

    DF is already prominent on the JDM market and available through their sellers. I think it’s a new model albeit only slightly tweaked

    Posted:



  • ValtielValtiel Konica-Minolta Bizhub Members  4022WRX Points: 2,028Handicap: 1.7Posts: 4,022 Titanium Tees
    Joined:  #5

    On -, @phatchrisrules said:

    On -, @Valtiel said:

    I'm going to take a guess and say that based on the graphics and the fact that the chart says "Mid-High" kickpoint that this might just be a JDM version of the DF. Just a hunch though.

    Or maybe a replacement for the X'17? According to the X'17 spec sheets it matched up kind of close. But my money is on your JDM version though.

    That would be interesting! It says MR70 + Boron and if that were applied to the full length of the shaft then it could line up with a new X-series product, although it would be surprising and a bit confusing if they dropped the X-series name and used a convention from an existing product line.

    On -, @BearQ said:

    On -, @Valtiel said:

    I'm going to take a guess and say that based on the graphics and the fact that the chart says "Mid-High" kickpoint that this might just be a JDM version of the DF. Just a hunch though.

    DF is already prominent on the JDM market and available through their sellers. I think it’s a new model albeit only slightly tweaked

    Ah, interesting. I wonder if it is maybe a push towards having four core models in a lineup instead of three based on the Tensei success. Maybe the ZF is a counterbalanced version?

    Posted:
    Mizuno ST190 9.5* Diamana X'17 70XX || Taylormade M1 430 8.5* Tensei Pro Orange V2 70TX
    Titleist 915FD 15* Kuro Kage 80XTS || Taylormade RSI UDI 16* Fujikura Motore Speeder HB 9.8 Tour-Spec X
    Titleist 915FD 18* Kuro Kage 90XTS || Titleist 818H1 18.25* Diamana Kai'li s103x Prototype 
    Callaway X-Forged UT 20* Kuro Kage XT 100TX Hybrid
    Callaway X-Forged UT 23* Brunswick Precision Rifle FCM 7.0
    Bridgestone J40 DPC 5i-7i 27*- 35* Brunswick Precision Rifle FCM 7.0
    Bridgestone J40 CB 8i-PW 39*- 48* Brunswick Precision Rifle FCM 7.0
    Vokey Mild Raw 8620 54* Brunswick Precision Rifle FCM 7.0
    Vokey SM6 58* Oil Can Low Bounce K-Grind Brunswick Precision Rifle FCM 7.0
    Vokey Special 61* Black Oxide V-Grind Brunswick Precision Rifle FCM 7.0
    Scotty Cameron Newport Tour Red Dot

    WITB Thread
  • ValtielValtiel Konica-Minolta Bizhub Members  4022WRX Points: 2,028Handicap: 1.7Posts: 4,022 Titanium Tees
    Joined:  #7


    Hello All!

    This is going to be a fourth part to the Fourth Generation Diamana Series. This is a new product for MCA and won't be replacing anything in our current lineup.

    The US press release will be live on MCA-Golf.com in the very near future - I'll be sure to comment the link as soon as it goes up!

    -Team MCA

    Thank you for the info! Excited to see what the scoop is. :)

    Posted:
    Mizuno ST190 9.5* Diamana X'17 70XX || Taylormade M1 430 8.5* Tensei Pro Orange V2 70TX
    Titleist 915FD 15* Kuro Kage 80XTS || Taylormade RSI UDI 16* Fujikura Motore Speeder HB 9.8 Tour-Spec X
    Titleist 915FD 18* Kuro Kage 90XTS || Titleist 818H1 18.25* Diamana Kai'li s103x Prototype 
    Callaway X-Forged UT 20* Kuro Kage XT 100TX Hybrid
    Callaway X-Forged UT 23* Brunswick Precision Rifle FCM 7.0
    Bridgestone J40 DPC 5i-7i 27*- 35* Brunswick Precision Rifle FCM 7.0
    Bridgestone J40 CB 8i-PW 39*- 48* Brunswick Precision Rifle FCM 7.0
    Vokey Mild Raw 8620 54* Brunswick Precision Rifle FCM 7.0
    Vokey SM6 58* Oil Can Low Bounce K-Grind Brunswick Precision Rifle FCM 7.0
    Vokey Special 61* Black Oxide V-Grind Brunswick Precision Rifle FCM 7.0
    Scotty Cameron Newport Tour Red Dot

    WITB Thread
  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • autronicdsmautronicdsm Members  820WRX Points: 112Handicap: 999Posts: 820 Golden Tee
    Joined:  #8


    Posted:
  • RonSwansonRonSwanson Honor: if you need it defined, you don’t have it. ClubWRX  1871WRX Points: 295Handicap: KidsPosts: 1,871 ClubWRX
    Joined:  #9

    Interesting soft mid section. Hzrdus Yellow profile with upgraded materials? Should be a winner.

    Posted:

    TaylorMade SIM 10.5* @ 9.5* - Rogue White 130 70 TX

    TaylorMade M5 TI 5 wood 18* @ 17* - Rogue White 130 80 TX

    Titleist U500 3 - MMT 105 TX

    Miura TC-201 4-PW - Modus 120 TX

    TaylorMade Hi-Toe Raw 50* @ 51*, 54* @ 56* ,60* @ 61* - DG TI S400

    TaylorMade Tour Issue Spider X Navy

  • ValtielValtiel Konica-Minolta Bizhub Members  4022WRX Points: 2,028Handicap: 1.7Posts: 4,022 Titanium Tees
    Joined:  #10

    On -, @RonSwanson said:

    Interesting soft mid section. Hzrdus Yellow profile with upgraded materials? Should be a winner.

    The HZRDUS Yellow is pretty extreme with its dip in mid stiffness, this merely looks like a mid ground between the DF and the BF per the chart. Mitsubishi tends to be far more smooth with their profiles while the Project X graphite shafts often go to more extreme to create specific feels. Still very cool though, I also wonder if this will be more counter balanced or not.

    Posted:
    Mizuno ST190 9.5* Diamana X'17 70XX || Taylormade M1 430 8.5* Tensei Pro Orange V2 70TX
    Titleist 915FD 15* Kuro Kage 80XTS || Taylormade RSI UDI 16* Fujikura Motore Speeder HB 9.8 Tour-Spec X
    Titleist 915FD 18* Kuro Kage 90XTS || Titleist 818H1 18.25* Diamana Kai'li s103x Prototype 
    Callaway X-Forged UT 20* Kuro Kage XT 100TX Hybrid
    Callaway X-Forged UT 23* Brunswick Precision Rifle FCM 7.0
    Bridgestone J40 DPC 5i-7i 27*- 35* Brunswick Precision Rifle FCM 7.0
    Bridgestone J40 CB 8i-PW 39*- 48* Brunswick Precision Rifle FCM 7.0
    Vokey Mild Raw 8620 54* Brunswick Precision Rifle FCM 7.0
    Vokey SM6 58* Oil Can Low Bounce K-Grind Brunswick Precision Rifle FCM 7.0
    Vokey Special 61* Black Oxide V-Grind Brunswick Precision Rifle FCM 7.0
    Scotty Cameron Newport Tour Red Dot

    WITB Thread
  • RonSwansonRonSwanson Honor: if you need it defined, you don’t have it. ClubWRX  1871WRX Points: 295Handicap: KidsPosts: 1,871 ClubWRX
    Joined:  #11

    On -, @Valtiel said:

    On -, @RonSwanson said:

    Interesting soft mid section. Hzrdus Yellow profile with upgraded materials? Should be a winner.

    The HZRDUS Yellow is pretty extreme with its dip in mid stiffness, this merely looks like a mid ground between the DF and the BF per the chart. Mitsubishi tends to be far more smooth with their profiles while the Project X graphite shafts often go to more extreme to create specific feels. Still very cool though, I also wonder if this will be more counter balanced or not.

    Yeah, after looking at all the EI profiles, I might have jumped the gun on that comparison.

    Seems like this could be a twist on the BF. Using the DF as the constant since that's all that is shone in the graphic, the BF dips softer in the "mid-tip" while the ZF moves that dip up to the "mid-handle" with a slightly stiffer handle overall than the BF.

    Posted:

    TaylorMade SIM 10.5* @ 9.5* - Rogue White 130 70 TX

    TaylorMade M5 TI 5 wood 18* @ 17* - Rogue White 130 80 TX

    Titleist U500 3 - MMT 105 TX

    Miura TC-201 4-PW - Modus 120 TX

    TaylorMade Hi-Toe Raw 50* @ 51*, 54* @ 56* ,60* @ 61* - DG TI S400

    TaylorMade Tour Issue Spider X Navy

  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • mBiden2mBiden2 #15 and counting..... Atlanta, GAMembers  1123WRX Points: 281Handicap: 10.2Posts: 1,123 Platinum Tees
    Joined:  #13


    Diamana ZF Press Release from 7/2/19:

    Carlsbad, CA – (July 01, 2019) – For the first time ever, Mitsubishi Chemical is adding a fourth profile to their popular Diamana™ Fourth Generation Series. The new Diamana™ ZF builds on the success of the Diamana™ BF and provides the perfect option for players looking to push their distance farther.

    “Diamana™ ZF-Series takes the signature ‘smooth’ bend profile that makes our BF-Series the shaft of choice for so many players and pushes it in just the right places,” says Mark Gunther, Vice President of Sales and Marketing for MCA GOLF. “The result is a profile that makes ZF a little more explosive and easier to accelerate.”

    Like all of their Diamana™ Fourth Generation Series predecessors, Diamana™ ZF shafts owe their carefully calibrated stiffness and stability to two unique technologies: MR70 carbon fiber material, and Boron fiber.

    MR70, used in both the butt and tip sections, is 20% stronger than conventional materials, with a 10% greater modulus (a measure of stiffness). This is bolstered by Boron fiber in the tip section to create the exact EI curve desired.

    When compared to Diamana™ BF-Series, the Diamana™ ZF-Series shafts are a moderately stronger and more stable in both the butt and tip ends, with a slightly softer and more active middle for better energy transfer and acceleration. This produces a shaft that is incredibly solid during transition at the top of the swing and through impact, but with smooth speed and a lively feel.

    Adding to the excitement around Diamana™ ZF-Series is the inclusion of 40g version, the lightest Fourth Generation Shaft offered to date.

    “We’re extremely happy to have a 40g option within Diamana™ ZF,” says Gunther. “This opens the performance benefits of these unique Mitsubishi Chemical materials to a whole new range of players who prefer to play an ultra-lightweight shaft.”

    Diamana™ ZF-Series are ideal for any player looking to increase clubhead acceleration while maintaining stability and control through impact.

    Diamana™ ZF-Series will be available September, 13 2019 at MCA GOLF authorized retailers and dealers nationwide, with a suggested retail price of$400.

    Weights and flexes:
    DIAMANA™ ZF-Series 40 (R2, R, S Flex)
    DIAMANA™ ZF-Series 50 (R, S, TX Flex)
    DIAMANA™ ZF-Series 60 (S, TX Flex)
    DIAMANA™ ZF-Series 70 (S, TX Flex)
    DIAMANA™ ZF-Series 80 (S, TX Flex)

    Profile:
    Mid Launch and Low Spin

    Technology Featured:

    MR70
    Specifically designed and developed by Mitsubishi Chemical for high-performance applications, MR70 is an innovative new carbon fiber material that is 20% stronger with a 10% greater modulus than conventional materials.

    BORON
    Boron fiber is equivalent in stiffness to high modulus carbon fiber, but with superior compression strength. As a result, it is often utilized for structural reinforcement, most notably in military applications. Mitsubishi Chemical uses Boron fiber in combination with other proprietary materials to produce prepreg options that deliver unprecedented strength and stability.

    ION PLATING
    Ion Plating is a process that creates a sophisticated, premium finish that cannot be achieved by a simple paint application. The shafts are placed in a vacuum chamber where chrome or silver alloy ions are fused to the surface, creating a stunning finish that is more than worth the extra time.

    ABOUT US
    MCA GOLF, INC. is a wholly owned subsidiary of Mitsubishi Chemical Holdings Corporation, dedicated to designing and developing high performance composite golf shafts for discerning golfers everywhere. MCA GOLF, INC. leverages its own resources and raw materials through vertical integration, which gives it a competitive advantage. Over the years, it has been a leading supplier of premium composite golf shafts worldwide. With many of the world's best players using its golf shafts, MCA GOLF, INC. has established itself as a dominant force in the golf industry.

    For additional information, please contact:

    Stacey Benvenuto
    Brand Marketing / Tour Representative
    MCA GOLF, INC.
    E. [email protected]

    Date:
    July 02, 2019

    Sounds like a perfect 3w match to me!

    Posted:
    WITB

    Driver: TaylorMade SIM MAX (10.5 degrees - set to 9.75 and 1.5 degrees open) - Shaft: Aldila Rogue 130 White 70 TX (at 45” and tipped 1”)

    3-wood: TaylorMade SIM (15 degrees) - Shaft: Aldila Rogue 130 Black 70 TX (at 43” and tipped 1”)

    UDI - ***under construction***

    Irons - ***under construction***

    Wedges: TaylorMade MG 2 Raw (48 bent to 50-11, 54-11, 56 bent to 58-14 degrees) - Shafts: True Temper Dynamic Gold Tour Issue S400

    Putter - Scotty Cameron Studio Select Newport 2 Mid-Slant 34”

  • ValtielValtiel Konica-Minolta Bizhub Members  4022WRX Points: 2,028Handicap: 1.7Posts: 4,022 Titanium Tees
    Joined:  #14

    Beefed up blueboard profile? Love it! This will be a must try for sure.

    Also on a completely different note, it is interesting that the fourth generation is the first to have four models. Many Japanese companies completely avoid the number 4 much in the same way we used to avoid "13" in the states. I wonder if anyone back in Japan was uncomfortable about this, hah.

    Posted:
    Mizuno ST190 9.5* Diamana X'17 70XX || Taylormade M1 430 8.5* Tensei Pro Orange V2 70TX
    Titleist 915FD 15* Kuro Kage 80XTS || Taylormade RSI UDI 16* Fujikura Motore Speeder HB 9.8 Tour-Spec X
    Titleist 915FD 18* Kuro Kage 90XTS || Titleist 818H1 18.25* Diamana Kai'li s103x Prototype 
    Callaway X-Forged UT 20* Kuro Kage XT 100TX Hybrid
    Callaway X-Forged UT 23* Brunswick Precision Rifle FCM 7.0
    Bridgestone J40 DPC 5i-7i 27*- 35* Brunswick Precision Rifle FCM 7.0
    Bridgestone J40 CB 8i-PW 39*- 48* Brunswick Precision Rifle FCM 7.0
    Vokey Mild Raw 8620 54* Brunswick Precision Rifle FCM 7.0
    Vokey SM6 58* Oil Can Low Bounce K-Grind Brunswick Precision Rifle FCM 7.0
    Vokey Special 61* Black Oxide V-Grind Brunswick Precision Rifle FCM 7.0
    Scotty Cameron Newport Tour Red Dot

    WITB Thread
  • SC-TX 88SC-TX 88 Members  1118WRX Points: 139Posts: 1,118 Platinum Tees
    Joined:  #15

    So it’s like the PX LZ from a few years back?

    Posted:
    SIM 9.0 w/ Kuro Kage XD 70TX tipped 1”
    SIM TI 3 (actual 15.4; set one click lower) w/Tensei Pro White 80 TX tipped 1.5”
    Miura MB 001 3-PW w/ PX LZ 7.0
    Artisan 51,55,60 inbound
    Toulon Las Vegas (Artisan inbound)
    Ball: Bridgestone Tour B XS

    Course dependent: 3 iron replace with -  SIM Rescue 19 w/PW 90TX; TP UDI 3 w/ Fuji Pro 115 X; SIM 5 wood w/ Tensei Proto 90TX



  • ValtielValtiel Konica-Minolta Bizhub Members  4022WRX Points: 2,028Handicap: 1.7Posts: 4,022 Titanium Tees
    Joined:  #16

    On -, @SC-TX 88 said:

    So it’s like the PX LZ from a few years back?

    The PX LZ is very similar to the HZRDUS Yellow and Smoke Yellow, far more extreme in its mid softness. It is the same basic principle though, just a Blueboard type of profile with more stiffness at either end.

    Posted:
    Mizuno ST190 9.5* Diamana X'17 70XX || Taylormade M1 430 8.5* Tensei Pro Orange V2 70TX
    Titleist 915FD 15* Kuro Kage 80XTS || Taylormade RSI UDI 16* Fujikura Motore Speeder HB 9.8 Tour-Spec X
    Titleist 915FD 18* Kuro Kage 90XTS || Titleist 818H1 18.25* Diamana Kai'li s103x Prototype 
    Callaway X-Forged UT 20* Kuro Kage XT 100TX Hybrid
    Callaway X-Forged UT 23* Brunswick Precision Rifle FCM 7.0
    Bridgestone J40 DPC 5i-7i 27*- 35* Brunswick Precision Rifle FCM 7.0
    Bridgestone J40 CB 8i-PW 39*- 48* Brunswick Precision Rifle FCM 7.0
    Vokey Mild Raw 8620 54* Brunswick Precision Rifle FCM 7.0
    Vokey SM6 58* Oil Can Low Bounce K-Grind Brunswick Precision Rifle FCM 7.0
    Vokey Special 61* Black Oxide V-Grind Brunswick Precision Rifle FCM 7.0
    Scotty Cameron Newport Tour Red Dot

    WITB Thread
  • RonSwansonRonSwanson Honor: if you need it defined, you don’t have it. ClubWRX  1871WRX Points: 295Handicap: KidsPosts: 1,871 ClubWRX
    Joined:  #17

    I ordered one. 70TX. Will report back when it gets here.

    Posted:

    TaylorMade SIM 10.5* @ 9.5* - Rogue White 130 70 TX

    TaylorMade M5 TI 5 wood 18* @ 17* - Rogue White 130 80 TX

    Titleist U500 3 - MMT 105 TX

    Miura TC-201 4-PW - Modus 120 TX

    TaylorMade Hi-Toe Raw 50* @ 51*, 54* @ 56* ,60* @ 61* - DG TI S400

    TaylorMade Tour Issue Spider X Navy

  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • Rig14PortRig14Port Members  973WRX Points: 270Handicap: +18Posts: 973 Golden Tee
    Joined:  #18

    On -, @RonSwanson said:

    I ordered one. 70TX. Will report back when it gets here.

    I'm jealous. if you don't like feel free to shoot me a pm...

    Posted:
    Callaway MAVRIK SZ 9* HZRDUS “Hulk” Green 70 6.5TX
    Callaway MAVRIK SZ 15* HZRDUS Smoke Black 80 6.5X
    Titleist U500 2 HZRDUS Smoke Black 90 6.5X
    Mizuno JPX-919 Forged 4, JPX-919 Tour 5-PW DG 120 X100
    Mizuno T20 Raw 50*, 54*, 58* DG 120 X100
    TM Spider X Chalk
  • danielwkelliherdanielwkelliher Members  262WRX Points: 100Posts: 262 Greens
    Joined:  #19

    Anyone have this in play yet? Gaming DF now

    Posted:

    G410 LST - Diamana 60TX, Smoke Green 60 TX
    TS3 15.75 - Evenflow White 75 6.5
    919 Tours 4-PW - Project X 6.0
    RTX4 - 50/54-60 - S400 TI
    Spider X Custom and T22 NP2

  • RonSwansonRonSwanson Honor: if you need it defined, you don’t have it. ClubWRX  1871WRX Points: 295Handicap: KidsPosts: 1,871 ClubWRX
    Joined:  #20

    I was told it won’t be released until September.

    Posted:

    TaylorMade SIM 10.5* @ 9.5* - Rogue White 130 70 TX

    TaylorMade M5 TI 5 wood 18* @ 17* - Rogue White 130 80 TX

    Titleist U500 3 - MMT 105 TX

    Miura TC-201 4-PW - Modus 120 TX

    TaylorMade Hi-Toe Raw 50* @ 51*, 54* @ 56* ,60* @ 61* - DG TI S400

    TaylorMade Tour Issue Spider X Navy

  • MITSUBISHI CHEMICALMITSUBISHI CHEMICAL Sponsors  163WRX Points: 218Posts: 163 Fairways
    Joined:  edited Aug 2, 2019 #21

    Hi All! Follow this link for specs on Diamana ZF: http://www.mrc-golf.com/products/zf-series

    This is available in September with our large network of Authorized Dealers.

    Comment with any questions!

    -Team MCA

    Posted:
  • danielwkelliherdanielwkelliher Members  262WRX Points: 100Posts: 262 Greens
    Joined:  #22

    Looks fantastic. Cant wait to try it against my DF

    Posted:

    G410 LST - Diamana 60TX, Smoke Green 60 TX
    TS3 15.75 - Evenflow White 75 6.5
    919 Tours 4-PW - Project X 6.0
    RTX4 - 50/54-60 - S400 TI
    Spider X Custom and T22 NP2

  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • Rig14PortRig14Port Members  973WRX Points: 270Handicap: +18Posts: 973 Golden Tee
    Joined:  #23


    Hi All! Follow this link for specs on Diamana ZF: http://www.mrc-golf.com/products/zf-series

    This is available in September with our large network of Authorized Dealers.

    Comment with any questions!

    -Team MCA

    This thing sounds like my dream shaft... unfortunately, i cant justify $350 for a shaft. Anyone gets one in X/TX that they dont end up liking holler at me for a re-sale op.

    Posted:
    Callaway MAVRIK SZ 9* HZRDUS “Hulk” Green 70 6.5TX
    Callaway MAVRIK SZ 15* HZRDUS Smoke Black 80 6.5X
    Titleist U500 2 HZRDUS Smoke Black 90 6.5X
    Mizuno JPX-919 Forged 4, JPX-919 Tour 5-PW DG 120 X100
    Mizuno T20 Raw 50*, 54*, 58* DG 120 X100
    TM Spider X Chalk
  • gioguy21gioguy21 NJMembers  8221WRX Points: 1,412Handicap: +1.5 (1194646)Posts: 8,221 Titanium Tees
    Joined:  #24

    if my Hulk doesn't work out, i'll be picking one of these up.

    Posted:

    SIM / 9* (set 1 tick higher loft) / RIPx 65TX tipped 2" playing 44.25"
    Epic Flash SZ / 3+ (set -1/N) / HZRDUS Smoke Black 75g 6.5 tipped 2"
    SIM Max 3H / Tensei PW Hybrid 100TX
    Apex MB Chrome / 3-PW / Modus 130 X
    MD4 Chrome / 52, 56, 60 / DG 115 S200 (for now)
    Piretti Tour 801R / 35.5"

  • jgard320jgard320 ClubWRX  501WRX Points: 96Posts: 501 ClubWRX
    Joined:  #25

    Literally just went rogue white in driver, 3w, 5w.....sheesh

    Posted:
  • FunksterFunkster Members  4WRX Points: 28Posts: 4 Starters
    Joined:  #26

    Just in time for my driver fitting in September.

    Posted:
  • huckitchuckithuckitchuckit California Members  107WRX Points: 45Posts: 107 Fairways
    Joined:  #27

    So this seems like it falls in between a BF and DF.

    Posted:
  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • MITSUBISHI CHEMICALMITSUBISHI CHEMICAL Sponsors  163WRX Points: 218Posts: 163 Fairways
    Joined:  #28

    On -, @huckitchuckit said:

    So this seems like it falls in between a BF and DF.

    That is correct! Softer in the mid - firmer in the tip and butt vs. BF

    Posted:
  • GL3GL3 NHClubWRX  150WRX Points: 36Handicap: 8.4Posts: 150 ClubWRX
    Joined:  #29

    Ill be looking to pick one of these up real soon. If anyone can help me out with that shoot me a message!

    Posted:

    ♦️♦️♦️10.5 Tour AD XC 7 TX -2

    U85 18* MMT 105TX

    Yonex CB301 4-PW 120 X100

    SM7 50, 54 & 58

    Toulon Madison

  • huckitchuckithuckitchuckit California Members  107WRX Points: 45Posts: 107 Fairways
    Joined:  #30

    On -, @jgard320 said:

    Literally just went rogue white in driver, 3w, 5w.....sheesh

    Not a bad way to go...

    Posted:
  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • OcRockRollerOcRockRoller Humble Donkey FloridaMembers  230WRX Points: 87Posts: 230 Fairways
    Joined:  #31

    JT putting this new shaft in play after a dominant win and with all this money on the line this week takes some huge balls and speaks volumes about this shaft. Pretty cool

    Posted:
5

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.