Scotty Cameron 2019 Teryllium T22 (NO BUY SELL TRADE POSTS)

[payforbirdies]

interesting. Ok cool, maybe I’m just imagining it. It just seems a shade lighter to me now.

[PINSEEKER72]

Not too impressed with the QC.....here is how mine looked when I opened the box.

 

 

[masegolf1978]

> @PINSEEKER72 said:

> Not too impressed with the QC.....here is how mine looked when I opened the box.

>

>

>

 

That’s ridiculous. I’d send that back without a doubt...

[PINSEEKER72]

It went back immediately for a refund, and the shop where I got it said they won’t be able to get a replacement. This was going to be my gamer, but I’m actually glad this happened. For the same amount of money, I was able to buy three other clubs that will probably help my game more than this putter.

[NewWildcatOrder]

> @PINSEEKER72 said:

> It went back immediately for a refund, and the shop where I got it said they won’t be able to get a replacement. This was going to be my gamer, but I’m actually glad this happened. For the same amount of money, I was able to buy three other clubs that will probably help my game more than this putter.

 

The few imperfections my NP had either easily wiped off, or have wiped off over the course of a few rounds.

[PINSEEKER72]

These marks would not wipe off even with a fair amount of effort, and I didn’t want to use any kind of cleaner that would possibly ruin the finish. The worst part of this was the paint spill in the cavity from the sight line.....no amount of rubbing was going to take care of that.

[getair23]

I want to add a dot to the top of the putter. Should I go through the SC custom shop or source a local club builder to add it?

[luke1333]

> @PINSEEKER72 said:

> These marks would not wipe off even with a fair amount of effort, and I didn’t want to use any kind of cleaner that would possibly ruin the finish. The worst part of this was the paint spill in the cavity from the sight line.....no amount of rubbing was going to take care of that.

 

Paint remover should take care of it no problem

[jak77]

Anyone know where I can source replacement weights? I have a 34in NP2 with 15s and want to try it out with 10s. Gamed a NP2 pro platinum before and the weight difference is pretty significant. My putting is all over the place with the T22. Was going to stick it out and get used to it but figured if I lightened it a bit it might help. Thanks.

[toddba11]

This putter did not really impress me. Selling mine, looks great. But that is it......

[NewWildcatOrder]

> @jak77 said:

> Anyone know where I can source replacement weights? I have a 34in NP2 with 15s and want to try it out with 10s. Gamed a NP2 pro platinum before and the weight difference is pretty significant. My putting is all over the place with the T22. Was going to stick it out and get used to it but figured if I lightened it a bit it might help. Thanks.

 

I'd try placing a Want To Buy ad here on GolfWRX.

[Scotty1140]

> @PINSEEKER72 said:

> These marks would not wipe off even with a fair amount of effort, and I didn’t want to use any kind of cleaner that would possibly ruin the finish. The worst part of this was the paint spill in the cavity from the sight line.....no amount of rubbing was going to take care of that.

 

Acetone / finger nail polish remover will take it off easily. Won't harm the finish at all.

[jschwarb]

@PINSEEKER72 said:

> These marks would not wipe off even with a fair amount of effort, and I didn’t want to use any kind of cleaner that would possibly ruin the finish. The worst part of this was the paint spill in the cavity from the sight line.....no amount of rubbing was going to take care of that.

 

I noticed a little spill from the sightline on mine too, but that was only on close inspection. In play, my eyes aren't anywhere near good enough to notice.

 

 

[MysteryV]

After the first round, and some more time with my FB, I may be changing my tune. It took me a while to adjust, but now that I have, the feel is pretty fantastic. I still prefer the feel of my GSS DH89, but the feel has really, REALLY grown on me. Anyone not impressed, give it some more time. Feedback is great, and once my body adapted and I started rolling it pure, it started to shine.

[drscott266]

> @toddba11 said:

> This putter did not really impress me. Selling mine, looks great. But that is it......

 

I am in this boat too, but probably won't go through trouble of selling it. It's as good as any of my OTR cameron blades, maybe a touch softer on pure strikes. Not as exciting as I thought it would be. Did teach me to stop coveting the Tour Rats and Circle T as I am sure they roll the same as my Mil Spec which feels pretty good as is just light.

[AdExec]

I was able to pick up a new in plastic 33” NP2 on OfferUp.

Do I game it or sell it? Currently rolling a 2018 Newport 3 and prefer the heavier feel, but haven’t rolled a putt with the T22 yet. How rare is the 33” model? Only two on eBay asking 1200 each. Couple have sold over 1k.

[AdExec]

> @AdExec said:

> I was able to pick up a new in plastic 33” NP2 on OfferUp.

> Do I game it or sell it? Currently rolling a 2018 Newport 3 and prefer the heavier feel, but haven’t rolled a putt with the T22 yet. How rare is the 33” model? Only two on eBay asking 1200 each. Couple have sold over 1k.

 

 

 

 

[Mudguard]

> @AdExec said:

> I was able to pick up a new in plastic 33” NP2 on OfferUp.

> Do I game it or sell it? Currently rolling a 2018 Newport 3 and prefer the heavier feel, but haven’t rolled a putt with the T22 yet. How rare is the 33” model? Only two on eBay asking 1200 each. Couple have sold over 1k.

 

I've mentioned it before. But I don't think there is a premium on the different lengths anymore. The head weight for the three lengths will be the same, it's just increased on the shorter putters via the weights. Whereas ten years ago, a 33" putter was 350g, 34" 340g and 330g for 35".

With the new ones you can simply chop a 35" and put heavier weights in.

[NewWildcatOrder]

> @AdExec said:

> I was able to pick up a new in plastic 33” NP2 on OfferUp.

> Do I game it or sell it? Currently rolling a 2018 Newport 3 and prefer the heavier feel, but haven’t rolled a putt with the T22 yet. How rare is the 33” model? Only two on eBay asking 1200 each. Couple have sold over 1k.

 

From what I know, most retailers weren't able to order the 33" versions, but anyone can swap out the weights to the 20 gram versions so honestly it won't be worth THAT much more than the 34 and 35 versions. As others mentioned, if this was a solid head w/o removable weights 350 would be worth more than 340/330 heads, but you just don't have that dynamic here.

[AdExec]

 

> From what I know, most retailers weren't able to order the 33" versions, but anyone can swap out the weights to the 20 gram versions so honestly it won't be worth THAT much more than the 34 and 35 versions. As others mentioned, if this was a solid head w/o removable weights 350 would be worth more than 340/330 heads, but you just don't have that dynamic here.

 

appreciate the response. That makes the decision to game it a little easier.

[Krt22]

> @NewWildcatOrder said:

> > @AdExec said:

> > I was able to pick up a new in plastic 33” NP2 on OfferUp.

> > Do I game it or sell it? Currently rolling a 2018 Newport 3 and prefer the heavier feel, but haven’t rolled a putt with the T22 yet. How rare is the 33” model? Only two on eBay asking 1200 each. Couple have sold over 1k.

>

> From what I know, most retailers weren't able to order the 33" versions, but anyone can swap out the weights to the 20 gram versions so honestly it won't be worth THAT much more than the 34 and 35 versions. As others mentioned, if this was a solid head w/o removable weights 350 would be worth more than 340/330 heads, but you just don't have that dynamic here.

 

That is why I did. I bought a flat black shaft, added a matador grip, cut to 33.5", swapped the 20g weights from my SB1.5, and wham, amazing flat stick. I personally love the non-glare aspect of the whole club and dont mind the oh so slightly firm feel. I cannot play the overly soft insert type putters, my distance control goes out the door, so the T22 is perfect right now.

[bellken]

My local golf course, just received a new shipment of T22's. I am enjoying my Newport, but, was surprised to see more.

[Commack350Z]

I am beginning to think these are not that limited. I was at the local store yesterday and they had 10 NPs in stock.

[GoGoErky]

> @Commack350Z said:

> I am beginning to think these are not that limited. I was at the local store yesterday and they had 10 NPs in stock.

 

They aren’t rare but are limited.

[4rheel]

Ok, was rolling a few during my lunch and noticed a copper highlight at address. Ran my finger across the face and the insert is sticking out towards the toe. Crap!!!

 

 

 

[cnnmaverick]

> @4rheel said:

> Ok, was rolling a few during my lunch and noticed a copper highlight at address. Ran my finger across the face and the insert is sticking out towards the toe. Crap!!!

>

>

>

>

 

Wow that sucks... Definitely bad quality control. Send it back and I'm sure they're going to get you a new replacement... And maybe throw in a few ProV1s

 

[masegolf1978]

> @cnnmaverick said:

> > @4rheel said:

> > Ok, was rolling a few during my lunch and noticed a copper highlight at address. Ran my finger across the face and the insert is sticking out towards the toe. Crap!!!

> >

> >

> >

> >

>

> Wow that sucks... Definitely bad quality control. Send it back and I'm sure they're going to get you a new replacement... And maybe throw in a few ProV1s

>

Not uncommon. Same with mine...

 

[jmconnell4]

> @masegolf1978 said:

> > @cnnmaverick said:

> > > @4rheel said:

> > > Ok, was rolling a few during my lunch and noticed a copper highlight at address. Ran my finger across the face and the insert is sticking out towards the toe. Crap!!!

> > >

> > >

> > >

> > >

> >

> > Wow that sucks... Definitely bad quality control. Send it back and I'm sure they're going to get you a new replacement... And maybe throw in a few ProV1s

> >

> Not uncommon. Same with mine...

>

 

I think I have a similar issue with mine! What email or phone number do you use to set up a replacement?

[sheldonjhacker]

My FB came with either rust or sharpie marks on the insert. Ridiculous.

[Scotty1140]

> @sheldonjhacker said:

> My FB came with either rust or sharpie marks on the insert. Ridiculous.

 

While I totally agree that's a QC miss, either issue shouldn't be an issue. Copper won't "rust" like metal will so as the entire insert darkens aka patina's over time those marks should disappear. If it's sharpie marks a quick wipe with acetone/fingenail polish remover will take them off instantly.