New SeeMore putters - Sept 2019

[pga43]

[QuigleyDU]

I like this one..

 

 

[animalgolfs]

M7 Tour?

[J13]

So they just added a plumbers neck to their existing putters?

[MaineMariner]

Those are some very interesting and unique hosels. Gotta hand it to SeeMore, they sure are innovative. I could definitely see myself grabbing that plumber's neck notchback.

 

That last putter is really weird. I feel like the little alignment thing would snap off super easily.

[bunta]

the fact that they put the alignment line on the topline of the ansers makes me feel obligated to give them a try.

 

but why do they look like little toddler clubs ? they look tiny.

[J13]

> @MaineMariner said:

> Those are some very interesting and unique hosels. Gotta hand it to SeeMore, they sure are innovative. I could definitely see myself grabbing that plumber's neck notchback.

>

> That last putter is really weird. I feel like the little alignment thing would snap off super easily.

 

Are you being sarcastic with the innovative comment? I hope so. They literally just added a plumbers neck to their putters.

[QuigleyDU]

> @J13 said:

> So they just added a plumbers neck to their existing putters?

 

Pretty much. But that is a bold leap for them. I don't think they have changed anything on their putters in years. Pretty much wash, rinse, repeat.

You can tell they didnt want to change existing heads because the plumbers neck is a separate piece from the head.

[J13]

> @QuigleyDU said:

> > @J13 said:

> > So they just added a plumbers neck to their existing putters?

>

> Pretty much. But that is a bold leap for them. I don't think they have changed anything on their putters in years. Pretty much wash, rinse, repeat.

> You can tell they didnt want to change existing heads because the plumbers neck is a separate piece from the head.

 

Exactly which is why I think the above person was being sarcastic with the innovative comment. Seemore is the opposite of innovative haha. They literally release the same putters over and over, i'm amazed they stay in business to be honest.

[QuigleyDU]

> @J13 said:

> > @QuigleyDU said:

> > > @J13 said:

> > > So they just added a plumbers neck to their existing putters?

> >

> > Pretty much. But that is a bold leap for them. I don't think they have changed anything on their putters in years. Pretty much wash, rinse, repeat.

> > You can tell they didnt want to change existing heads because the plumbers neck is a separate piece from the head.

>

> Exactly which is why I think the above person was being sarcastic with the innovative comment. Seemore is the opposite of innovative haha. They literally release the same putters over and over, i'm amazed they stay in business to be honest.

 

The only seemore I have ever witnessed in use is the one by Zach Johnson. I have never seen one in play, in person. Tell me the first one pictured is not the same head as this one. Just with their innovative plumbers neck.

https://www.seemore.com/putters/black-si2w-offset-w-alum-insert-p1012-3003.html

[MaineMariner]

.

[Mr. Grumpy]

> @QuigleyDU said:

> > @J13 said:

> > > @QuigleyDU said:

> > > > @J13 said:

> > > > So they just added a plumbers neck to their existing putters?

> > >

> > > Pretty much. But that is a bold leap for them. I don't think they have changed anything on their putters in years. Pretty much wash, rinse, repeat.

> > > You can tell they didnt want to change existing heads because the plumbers neck is a separate piece from the head.

> >

> > Exactly which is why I think the above person was being sarcastic with the innovative comment. Seemore is the opposite of innovative haha. They literally release the same putters over and over, i'm amazed they stay in business to be honest.

>

> The only seemore I have ever witnessed in use is the one by Zach Johnson. I have never seen one in play, in person. Tell me the first one pictured is not the same head as this one. Just with their innovative plumbers neck.

> https://www.seemore.com/putters/black-si2w-offset-w-alum-insert-p1012-3003.html

 

I've seen a few, and had one myself. That said, I live in Franklin which is where they are. It may be rinse and repeat, but I think their approach and design doesn't really need any tinkering.. So, yes, a plumbers neck is kinda a big deal for them,, as was some of the more traditional head shapes announced earlier...

[QuigleyDU]

> @"Mr. Grumpy" said:

> > @QuigleyDU said:

> > > @J13 said:

> > > > @QuigleyDU said:

> > > > > @J13 said:

> > > > > So they just added a plumbers neck to their existing putters?

> > > >

> > > > Pretty much. But that is a bold leap for them. I don't think they have changed anything on their putters in years. Pretty much wash, rinse, repeat.

> > > > You can tell they didnt want to change existing heads because the plumbers neck is a separate piece from the head.

> > >

> > > Exactly which is why I think the above person was being sarcastic with the innovative comment. Seemore is the opposite of innovative haha. They literally release the same putters over and over, i'm amazed they stay in business to be honest.

> >

> > The only seemore I have ever witnessed in use is the one by Zach Johnson. I have never seen one in play, in person. Tell me the first one pictured is not the same head as this one. Just with their innovative plumbers neck.

> > https://www.seemore.com/putters/black-si2w-offset-w-alum-insert-p1012-3003.html

>

> I've seen a few, and had one myself. That said, I live in Franklin which is where they are. It may be rinse and repeat, but I think their approach and design doesn't really need any tinkering.. So, yes, a plumbers neck is kinda a big deal for them,, as was some of the more traditional head shapes announced earlier...

 

I have always wanted to like a seemore, I just never could. I would be willing to try one of these.

[Mr. Grumpy]

> @QuigleyDU said:

> > @"Mr. Grumpy" said:

> > > @QuigleyDU said:

> > > > @J13 said:

> > > > > @QuigleyDU said:

> > > > > > @J13 said:

> > > > > > So they just added a plumbers neck to their existing putters?

> > > > >

> > > > > Pretty much. But that is a bold leap for them. I don't think they have changed anything on their putters in years. Pretty much wash, rinse, repeat.

> > > > > You can tell they didnt want to change existing heads because the plumbers neck is a separate piece from the head.

> > > >

> > > > Exactly which is why I think the above person was being sarcastic with the innovative comment. Seemore is the opposite of innovative haha. They literally release the same putters over and over, i'm amazed they stay in business to be honest.

> > >

> > > The only seemore I have ever witnessed in use is the one by Zach Johnson. I have never seen one in play, in person. Tell me the first one pictured is not the same head as this one. Just with their innovative plumbers neck.

> > > https://www.seemore.com/putters/black-si2w-offset-w-alum-insert-p1012-3003.html

> >

> > I've seen a few, and had one myself. That said, I live in Franklin which is where they are. It may be rinse and repeat, but I think their approach and design doesn't really need any tinkering.. So, yes, a plumbers neck is kinda a big deal for them,, as was some of the more traditional head shapes announced earlier...

>

> I have always wanted to like a seemore, I just never could. I would be willing to try one of these.

 

I had the Si5 and when the honeymoon was over I ended up not liking the insert, felt too soft. I did try a seemore without the insert and liked it much better. Though by that time I had purchased a Kingston... The milled platinum series is really nice..

[QuigleyDU]

> @"Mr. Grumpy" said:

> > @QuigleyDU said:

> > > @"Mr. Grumpy" said:

> > > > @QuigleyDU said:

> > > > > @J13 said:

> > > > > > @QuigleyDU said:

> > > > > > > @J13 said:

> > > > > > > So they just added a plumbers neck to their existing putters?

> > > > > >

> > > > > > Pretty much. But that is a bold leap for them. I don't think they have changed anything on their putters in years. Pretty much wash, rinse, repeat.

> > > > > > You can tell they didnt want to change existing heads because the plumbers neck is a separate piece from the head.

> > > > >

> > > > > Exactly which is why I think the above person was being sarcastic with the innovative comment. Seemore is the opposite of innovative haha. They literally release the same putters over and over, i'm amazed they stay in business to be honest.

> > > >

> > > > The only seemore I have ever witnessed in use is the one by Zach Johnson. I have never seen one in play, in person. Tell me the first one pictured is not the same head as this one. Just with their innovative plumbers neck.

> > > > https://www.seemore.com/putters/black-si2w-offset-w-alum-insert-p1012-3003.html

> > >

> > > I've seen a few, and had one myself. That said, I live in Franklin which is where they are. It may be rinse and repeat, but I think their approach and design doesn't really need any tinkering.. So, yes, a plumbers neck is kinda a big deal for them,, as was some of the more traditional head shapes announced earlier...

> >

> > I have always wanted to like a seemore, I just never could. I would be willing to try one of these.

>

> I had the Si5 and when the honeymoon was over I ended up not liking the insert, felt too soft. I did try a seemore without the insert and liked it much better. Though by that time I had purchased a Kingston... The milled platinum series is really nice..

 

 

 

THey just always seem so flat to me. even these plumber neck models. They are not a vertical neck with an angel where the shaft and head meet. it is just straight with an offset. The more I look at it the more strange it looks to me.

[poppman2142]

So the plumbers going in to the head at such a severe angle is making them face balanced I assume? I guess I would prefer the hosel to angle towards the center of the face and have the shaft angle back where it enters the hosel so I don’t see the entire length of the hosel at address to make it face balanced. To each their own I guess!

[wlittle1274]

Boy this just doesn’t feel like the play for them

[QuigleyDU]

> @poppman2142 said:

> So the plumbers going in to the head at such a severe angle is making them face balanced I assume? I guess I would prefer the hosel to angle towards the center of the face and have the shaft angle back where it enters the hosel so I don’t see the entire length of the hosel at address to make it face balanced. To each their own I guess!

 

I would think it does not change anything other than the look from above. The shaft is still basically straight. it just has an offset to it. I don't know though.

[coreyhr]

The paint fill work on the black mallet SB20 is atrocious.

[broomsticker]

> @MaineMariner said:

> Those are some very interesting and unique hosels. Gotta hand it to SeeMore, they sure are innovative. I could definitely see myself grabbing that plumber's neck notchback.

>

> That last putter is really weird. I feel like the little alignment thing would snap off super easily.

 

Shocked the USGA said yes to that (assuming they have).

[spring70]

> @J13 said:

> > @QuigleyDU said:

> > > @J13 said:

> > > So they just added a plumbers neck to their existing putters?

> >

> > Pretty much. But that is a bold leap for them. I don't think they have changed anything on their putters in years. Pretty much wash, rinse, repeat.

> > You can tell they didnt want to change existing heads because the plumbers neck is a separate piece from the head.

>

> Exactly which is why I think the above person was being sarcastic with the innovative comment. Seemore is the opposite of innovative haha. They literally release the same putters over and over, i'm amazed they stay in business to be honest.

 

I never really looked at Seemore until my son just recently got fitted into one, their alignment system, albeit old tech from them is spot on and really works, plus his PCB model feels great for a non-insert putter. I respect Seemore more than TM and Odyssey as continue rip off each other with colors and head design, everytime Cameron comes out with something innovative they get panned and everyone here just wants AOP redos.

[TheInfidel]

Why have Seemore got a drunk guy on the work station for sight lines and paint fill? Looks like a Walmart putter, only worse.

[CEPHAS]

> @QuigleyDU said:

 

> The only seemore I have ever witnessed in use is the one by Zach Johnson. I have never seen one in play, in person. Tell me the first one pictured is not the same head as this one. Just with their innovative plumbers neck.

> https://www.seemore.com/putters/black-si2w-offset-w-alum-insert-p1012-3003.html

1999 US Open- Payne Stewart -just to share info. To your point it was a long time ago and i have only seen him and zach johnson use one.

 

[QuigleyDU]

> @CEPHAS said:

> > @QuigleyDU said:

>

> > The only seemore I have ever witnessed in use is the one by Zach Johnson. I have never seen one in play, in person. Tell me the first one pictured is not the same head as this one. Just with their innovative plumbers neck.

> > https://www.seemore.com/putters/black-si2w-offset-w-alum-insert-p1012-3003.html

> 1999 US Open- Payne Stewart -just to share info. To your point it was a long time ago and i have only seen him and zach johnson use one.

>

 

I forgot about that one. Thank you.

[chip75]

The USGA approved the Diving Board 2?

[QuigleyDU]

> @chip75 said:

> The USGA approved the Diving Board 2?

 

That just seems like something to get hung up in your bag.

[chip75]

> @QuigleyDU said:

> > @chip75 said:

> > The USGA approved the Diving Board 2?

>

> That just seems like something to get hung up in your bag.

 

Perhaps it springs out with a comical noise.

 


[gioguy21]

the SI5 looks like a garden spade

[Allergic2Birdies]

Im really surprised that a guy like bryson doesn’t games these. IMO seemores are for ppl that like to think alot about their game

[tider992010]

I like them. Been a See More fan for years and really like the product line expansion.