Putter recommendations for my swing - very slight arc backward to very strong arc forward

[Cubswin]

I got fitted on the SAM putter system about a year. I chose to adjust my face balanced O-Works Jailbird Mini rather than getting a new one. I have a very slight (or even straight) back swing, but a very strong arc after the impact. The SAM report recommended that I get a blade with a 30 degree toe-hang and a shaft offset.

This weekend, I tried, very casually, the Odyssey O-Works #1 blade and the Stroke Lab One blade at a local club. I liked the way they performed for me although it was on a small indoor putting green.

Now, I am thinking of getting a new putter. Before I head out to Club Champion or the PGA Superstore (each of which has its pros and cons), what are some of the putters I should try out?

So far, I am thinking of the following. I would appreciate any input on these and any other suggestions. Thanks.

Odyssey Works #1 and #1WStroke Lab One bladePing Sigma 2 AnserTaylormade TP Black Copper JunoEvnroll ER2.2 Midblade

[MattM97]

Oh man there is so much option wise if you're going for a blade.

 

I think start narrowing it down like; do you want solid milled or a putter with an insert? Price range? What do you like to look at at address (flange line, top line, top dot, nothing)?

[Cubswin]

Matt, thanks.

I like the Microhinge face of the O-Works. That said, I liked the milled face of the SC Newport that I had when I first started playing golf 7-8 years ago. I went away from the blade style, but am considering going back to it.

I like to line up using a single alignment line. I also like a heel shaft with some offset.

That said, I am approaching this with a totally open mind.

[MattM97]

That could be really hard to find going off the rack, maybe a custom is in order or maybe you find something you like.

 

While not a blade but the new Scotty Special Select Del Mar could be a milled heel shafted option, if you want an insert then Stroke Lab 9 but they discontinued that model so maybe it's on discount.

If you want similar to heel shafted maybe look into a flow neck or short slant neck like the Piretti Cortino 1.5 or Lucca

Now for a suggestion out of right field maybe try an Axis1 if they have any in store, they look weird but feel so good.

[Cubswin]

Thanks. I went back and looked at the SAM Puttlab report. It recommends the Areso Kine-Fit C30 putter. I love golf, but the process for getting one of these things is very elaborate. Not sure I love golf that much to spend that kind of time and effort.

I will definitely look at the models you suggested. Much appreciated.

Chris

[j3r1ch0h0l1c]

Cubswin:

I was fitted with the same recommendations as you (maybe a different loft/lie angle) but face balanced or 30 deg toe hang blade a little over 2 weeks ago. Eventually we decided on the 2018 Scotty Cameron Select Squareback gave me the best roll with some forgiveness. Being a mid blade/mallet gave me the best of both worlds. Maybe something similar to that might work for you?

[drscott266]

I had much the same fitting, and was recommended into anything with toe hang. The fitter also suggested that I try to reduce the amount of arc in my follow through, as ideally it should be more equal. I can echo the Squareback rec as I have one of those, a good mallet for someone who wants a blade. Otherwise the Toulon Las Vegas with the flow neck is a full mallet with toe hang. Currently gaming a Super Rat, so a full blown blade is an option too... depends on what feel you want.

[JunkerJorge]

give something a try with little to no offset. Even if it’s a center shaft. You may be surprised.

[Bobb3rdown]

Maltby ptm-4 could be a good fit. Heavy blade. Slightly larger face to back edge then most blades. Standard toe hand for blades. Loving it so far. Can be had in a club pak for a little over $100. Built mine with a black pvd shaft and gripmaster roo grip for under $150. You can get these at golfworks. Maybe theres one in your area to try out.