Single Length Updates (post'em up!)

1464748495052»
52

Comments

  • Tax77Tax77 Members  15WRX Points: 48Posts: 15 Bunkers
    Joined:  edited Feb 17, 2020 4:08am #1532

    Thanks, that's along the line I was thinking, cut down to 36.75 I think would be way more comfy for me that fidgeting with gripping down every time I'm digging into the middle of my bag. F9 is decently priced right now since the release of speedzone. Think I'll pull the trigger before spring and go half and half SL/VL.

    Posted:
  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • boggymanboggyman Members  2956WRX Points: 355Posts: 2,956 Titanium Tees
    Joined:  #1533

    Cobras customer service is top notch. The 9s were marked down several AFTER mine were ordered, and Cobra honored the sale price. Hats off to Cobra for that!!

    Posted:
  • ttttttt1432ttttttt1432 Members  22WRX Points: 16Posts: 22 Bunkers
    Joined:  #1534

    Anyone have more info on why Sterling and Wishon are ending their SL partnership?

    Posted:
  • toolmantoolman Members  1194WRX Points: 60Handicap: 5Posts: 1,194 Platinum Tees
    Joined:  #1535

    First round out with my one lengths today. Picked up a 4-pw cobra forged set. I must say I’m pretty surprised by the results. The short irons especially the PW was very fun to hit. I’d say it went about just as far as my normal distances...maybe a few yards more...but wow like super high...the pw was dead straight. I normally hit about 44% of greens today I hit 50% but a few shots were on the fridge. I was super happy with the long irons as well...the 5 was just as high as my normal 5 iron and the distance was on point. 195 in and hit my 5 iron pin high. However I will say you have to commit to the swing, if I backed off at all from a normal swing the ball would have the tendency to move to the right. Anyway I’m happy with this new adventure! 4 birdies today!

    Posted:
    COBRA LTD
    PING ANSER 4 WOOD
    COBRA One Length HYBRID 19*
    COBRA FORGED One Length 4-7 $-Taper
    COBRA FORGED BLACK MB 8-PW C-Taper
    BRIDGESTONE TOUR B 52*
    TAYLORMADE HI-TOE 58*
    CALLAWAY PM 64*
    SEEMORE FGP
    WITB Link
  • Snowman9000Snowman9000 Members  1334WRX Points: 272Handicap: 10Posts: 1,334 Platinum Tees
    Joined:  #1536

    I'm back to SL again, using a combo of Pinhawk Vertex 6-AW, and a Pinhawk 5H, all at 37 inches.

    The hybrid is so good that I'm going to get a 4H as well. By good I mean that it still goes nice and high, and the right distance, and being so short I can put a very confident swing on it. I'm a slow swinger at 75 MPH, so the 4H might be marginal height wise, but at least might be good for tight lay ups and greens that can be run up onto. I bet it will be fine off a tee, too.

    The Vertexes go high and straight. They are very much SGI irons. The 6 iron is a hotter face, hollow body, and it performs as such. Nice and high. I adjusted the lofts to be as follows: 28, 32, 36, 40, 44, 48. They might change after I really figure out my gaps. But they are close, if not already good. I bought the sand wedge but haven't built it because the AW is presently going too high and coming up short. (And I have decent mechanics.) That's mostly why I bent it from 50 to 48 and adjusted the others accordingly. I also tipped the shaft (SK Fiber TT75R) to the max, beyond max actually. Still the same issue. Right now I'm trying to figure out a good substitute for the AW. I might just buy a regular wedge instead. I play two MD2's right now, 54 bent to 53, and 58. I could get a 50 and bend it to 48 and be happy.

    But I do love the one club benefit of SL, and I think I should be able to find a gap wedge that does better. And maybe even a 53 degree as well. I like the easy height of the Vertexes, and might combo up some regular Pinhawks for the wedges, I dunno. In a perfect world I would get some Cobra OL wedges and add weight, I guess. (They are 10g lighter than the Vertexes.) Trying not to spend that kind of money on speculation, lol.

    Posted:
    M4 Driver
    5 Wood
    22º, 25º Hybrids
    4, 6-GW basic GI irons, weak lofts and +1/2" for more speed and launch
    54º, 58º Wedges
    Odyssey Jailbird Mini
  • ottrad1ottrad1 Members  36WRX Points: 60Posts: 36 Bunkers
    Joined:  #1537

    so I've played Edel SLS-01 for a couple of years and really like the heads and Paderson shafts. My experience with SL has been good and I believe has helped stabilize my often over the top casting swing. I'm now a 9 index. My only problem has been with the upper irons and wind. Physics apparently dictates the diminished length 4-5 irons will have less peak height and the extended length 8- 9-PW-GW go really high. It's great... when there is no wind. Playing at the beach was hard. Even trying to hit punch shots and knock downs the ball was really high. Is it worth going back to the old 'standard' length 8-GW in the wind instead? I don't know.. But it will be fun to try out as long as there aren't huge distance gaps.

    Posted:
  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • Snowman9000Snowman9000 Members  1334WRX Points: 272Handicap: 10Posts: 1,334 Platinum Tees
    Joined:  edited Mar 7, 2020 1:40am #1538

    I believe the high loft ones going high is due mostly to the shallower angle of attack that you get with a longer club. The club head speed is only about 3 MPH faster, so that's not it. And I've tried tipped or lower flight shafts like Cobra and Edel are doing, with not enough change to get excited about it.

    I am going to have to do with the wedges what I did with my last set: Open my stance a bit and play the ball back a bit.

    Posted:
    M4 Driver
    5 Wood
    22º, 25º Hybrids
    4, 6-GW basic GI irons, weak lofts and +1/2" for more speed and launch
    54º, 58º Wedges
    Odyssey Jailbird Mini
  • ARL67ARL67 Invisible Airwaves Crackle With Life Members  261WRX Points: 80Posts: 261 Greens
    Joined:  edited Mar 27, 2020 9:12pm #1539

    For those who have dismantled a set of One Lengths, is Cobra using any tip weights in their stock builds ? I want to acquire a used set of OL and cut down to 36.75” or 37.0” which means adding probably 6-8 grams of tip weights.

    Posted:

    WITB: Sun Mountain 4.5LS
    Titleist TS3 10.5 with Evenflow T1100 White 65
    Titleist TS2 19* hybrid with Evenflow White 90
    Titleist 818 H1 21* hybrid with Accra FX300H
    Cobra One Length Utility 4i with Steelfiber i110cw
    Mizuno MP-18 MMC 5-PW with Steelfiber i110cw
    Mizuno JPX-900F 50* with Steelfiber i110cw
    Cleveland RTX 54* & 58* Mid with Steelfiber i110cw
    Seemore Platinum M7 Tour with SS Pistol Grip

  • J295J295 Members  79WRX Points: 23Handicap: 6Posts: 79 Fairways
    Joined:  #1540

    considering single length…

    1. Good sources to search for a used set, including 37.5 inch wedges (gap, 54°, 58°).

    2. Manufactures recommended for an eight handicap 60-year-old that now plays and likes the looks of Titleist AP2.

    Posted:
  • puttitinputtitin Cote d'Azur , FRANCEMembers  1391WRX Points: 113Handicap: 12.8Posts: 1,391 Platinum Tees
    Joined:  #1541

    I would love to try the SL as an experiment If I came accross a three tier length set :

    • - 4H + 5i -7i = 37"
    • - 8i-PW = 36.25" ( 8 iron length)
    • - GW +SW = standard VL


    Posted:
    Driver : WISHON 919 THI + XXIO 9
    Woods :  TM M2 3W + 5W
    Hybrids : XXIO 9 - 21° + 25°
    Irons : JPX-800-HD + PING RAPTURE V2 (Wishon 771 CSI for sale)
    Wedges : CLEVELAND CBX 50-11 + 56-12
    Putter : ODYSSEY WHITE HOT  RX  #2
  • ARL67ARL67 Invisible Airwaves Crackle With Life Members  261WRX Points: 80Posts: 261 Greens
    Joined:  edited Apr 11, 2020 5:57pm #1542

    ^^^ I already play L-S-G-PW SL at 36.25" , then I go up in 1/4" increments and 0.5 SW per club, then my 6-5-4 are SL at 37.25"

    My next build will be:

    36.25" Lob-Sand ( RTX-4 )

    36.50" G-P-9-8-7 ( Adams CMB bent 1* strong, the 7i will be 33* ) 

    36.75  7-6-5  ( EQ1-NX irons bent 1* weak, 7-6-5 at 33-29-25* )

    That will give me 2 same-lofted 7 irons. I will game them and see if one of them proves to be preferable over the other. If I'm getting good distance / separation out of the EQ1 7-6-5, then I will eventually shorten them 1/4" to match the 7-GW lengths. For me, a bit shorter is always better, but for starters I don't want to sacrifice distance gapping out of the gate with the EQ1.

    Posted:
    Post edited by ARL67 on

    WITB: Sun Mountain 4.5LS
    Titleist TS3 10.5 with Evenflow T1100 White 65
    Titleist TS2 19* hybrid with Evenflow White 90
    Titleist 818 H1 21* hybrid with Accra FX300H
    Cobra One Length Utility 4i with Steelfiber i110cw
    Mizuno MP-18 MMC 5-PW with Steelfiber i110cw
    Mizuno JPX-900F 50* with Steelfiber i110cw
    Cleveland RTX 54* & 58* Mid with Steelfiber i110cw
    Seemore Platinum M7 Tour with SS Pistol Grip

  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • toolmantoolman Members  1194WRX Points: 60Handicap: 5Posts: 1,194 Platinum Tees
    Joined:  #1543

    Still loving my one lengths, especially the longer irons. Has anyone cut down the shorter irons to standard length and did this cause any issues? I'm assuming the SWs could be a little off.

    Posted:
    COBRA LTD
    PING ANSER 4 WOOD
    COBRA One Length HYBRID 19*
    COBRA FORGED One Length 4-7 $-Taper
    COBRA FORGED BLACK MB 8-PW C-Taper
    BRIDGESTONE TOUR B 52*
    TAYLORMADE HI-TOE 58*
    CALLAWAY PM 64*
    SEEMORE FGP
    WITB Link
  • ARL67ARL67 Invisible Airwaves Crackle With Life Members  261WRX Points: 80Posts: 261 Greens
    Joined:  edited Apr 20, 2020 7:13pm #1544

    Changed my mind and just put in an order for EQ1-NX 5-SW and a 4H and lots of bore weights. I may as well go all-in on this build. I still plan to build a 3 length set with 1/4" increments, see my post 2 above. Shafts will be from a set of Accra Tour 110i that I've been sitting from a previous build. Latest updates from Wishon's site ( comments section ) is mid-June for the irons and mid-July for the hybrids & woods. Covid is naturally causing manufacturing delays.

    Posted:

    WITB: Sun Mountain 4.5LS
    Titleist TS3 10.5 with Evenflow T1100 White 65
    Titleist TS2 19* hybrid with Evenflow White 90
    Titleist 818 H1 21* hybrid with Accra FX300H
    Cobra One Length Utility 4i with Steelfiber i110cw
    Mizuno MP-18 MMC 5-PW with Steelfiber i110cw
    Mizuno JPX-900F 50* with Steelfiber i110cw
    Cleveland RTX 54* & 58* Mid with Steelfiber i110cw
    Seemore Platinum M7 Tour with SS Pistol Grip

  • driveandputtmachinedriveandputtmachine 4 wedges or 2 iron? That is the question! Members  1433WRX Points: 267Handicap: 0.0Posts: 1,433 Platinum Tees
    Joined:  #1545

    I am still and have been playing 1/4 increments since 2002. I go down 1/4 to the 9 iron. PW, GW, SW, LW are all the same length. 6 Iron is 1/4 short, 5 iron is 1/2 short and 4 iron is 3/4 short. Not really SL, but I view the world as set length is part of a custom fit set.

    Yes, I do have lead tape on my long irons. Yes i did some porting in the hosel on the short irons. I am still experimenting with my new GW, SW, and LW to decide if I will port the back of them or just stick with them being a little bit heavier (SW) than I used to play.

    Posted:
    Driver - TM SIM on Chrome Elements
    Fairway - TM M5 on Project X HZRDOUS Yellow
    Irons - (4 -6) Cobra Speed Zone on Project X Catalyst 100
    Irons (7-W) Cobra Forged Tour on Project X Catalyst 100
    Wedges - Cleveland CB2 50* and 54*, Cleveland RTX 4 58* and 62* all on UST Recoil 110
    Putter - Mannkrafted MA/66 or Sunset Beach Ocean Isle on UST F FIlter or Taylormade Spider
    Ball - Srixon Z Star or Z Star XV
  • ARL67ARL67 Invisible Airwaves Crackle With Life Members  261WRX Points: 80Posts: 261 Greens
    Joined:  edited Apr 20, 2020 11:08pm #1546

    ^^^ Cool that you have been doing 1/4" for such a long time !

    I very recently re-tweaked the set in my signature. The L-S-G-PW are SL 36.25 , 9i = 36.5 , 8i = 36.75 , 7i = 37.0, then I am SL 5-6-3 at 37.25. Can't wait to game them once our courses open up ! The Cobra One Length Utilities are an interesting club with stock length of 37.25 with normal grip, an comes with a Recoil 780 F4. I bought a sleeve and made up a matching Steelfiber for it. FYI the head weight is 265g. I found the 3i locally, and recently bought the 4i & 5i on eBay, which should get here in a week. I'll have too much stuff to play with, judge flight, gapping, reliability, and then deciding what to keep, and how my current hybrids fit in, or not. The fun never ends !

    One nuisance was that the RTX-4 are D5 stock. I had to drill out a lot to lighten them up to play longer at 36.25". Even now they are a bit heavy for my liking, so I may need to port the backsides if their weight becomes a playing problem.

    Posted:

    WITB: Sun Mountain 4.5LS
    Titleist TS3 10.5 with Evenflow T1100 White 65
    Titleist TS2 19* hybrid with Evenflow White 90
    Titleist 818 H1 21* hybrid with Accra FX300H
    Cobra One Length Utility 4i with Steelfiber i110cw
    Mizuno MP-18 MMC 5-PW with Steelfiber i110cw
    Mizuno JPX-900F 50* with Steelfiber i110cw
    Cleveland RTX 54* & 58* Mid with Steelfiber i110cw
    Seemore Platinum M7 Tour with SS Pistol Grip

  • scooterhd2scooterhd2 Members  874WRX Points: 294Handicap: 7Posts: 874 Golden Tee
    Joined:  #1547

    Just gave up the One Length experiment. Started with the long irons, where I subbed in traditional length. But now I am completely back to variable length and have never been hitting the ball better. I do think the One Length experiment did help me though with understand my swing and setup. Also learned an invaluable lesson about hybrids, as I now play a shortened model. But time to throw the F8s on the bay!

    Posted:

    Ping G410+ 9*, Tensei Pro Orange

    Adams XTD Ti 17*, Fubuki

    Apex 20*, AD DI 85

    Srixon U85 23*, AD DI 95

    Srixon 585 5-6, Nippon 120

    Srixon 785 7-PW, Nippon 120

    Ping Glide 3.0 52*, Nippon 120

    TM Hi Toe 56*&60*, Nippon 120

    Evnroll ER3

  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • MountainGoatMountainGoat Mid-MarylandMembers  2734WRX Points: 1,304Posts: 2,734 Titanium Tees
    Joined:  edited Apr 21, 2020 12:06am #1548

    Yes.

    If you want clubs that short, probably best to find a set of Sterlings.

    Posted:
  • ARL67ARL67 Invisible Airwaves Crackle With Life Members  261WRX Points: 80Posts: 261 Greens
    Joined:  #1549

    ^^^ even better, I just ordered a set of the upcoming EQ1-NX heads 👍️

    Posted:

    WITB: Sun Mountain 4.5LS
    Titleist TS3 10.5 with Evenflow T1100 White 65
    Titleist TS2 19* hybrid with Evenflow White 90
    Titleist 818 H1 21* hybrid with Accra FX300H
    Cobra One Length Utility 4i with Steelfiber i110cw
    Mizuno MP-18 MMC 5-PW with Steelfiber i110cw
    Mizuno JPX-900F 50* with Steelfiber i110cw
    Cleveland RTX 54* & 58* Mid with Steelfiber i110cw
    Seemore Platinum M7 Tour with SS Pistol Grip

  • StanksStanks Everything I post is confrontational Members  1816WRX Points: 279Handicap: ?Posts: 1,816 Platinum Tees
    Joined:  #1550

    What are you all using for shafts?

    the stock FLT shafts were less than desirable in my mind and I wanted to try different shafts like C tapers or S400s/ X100s if able to.

    Im willing to try these again but, those stock shafts gotta change to something that doesn’t feel like a feather or wet noodle.

    Posted:
52

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.