Super rare TP Mills handmade... last price drop!

[jmac13]

All prices include shipping USPS. Will listen to reasonable offers but off to eBay if not gone by Saturday. Thanks for looking!

 

TP Mills One-b Handmade- Very rare, never seen the course. High polish black ox except the top line is matte. Love the raw cuts in the metal on the flange and I’m a sucker for ferrules on putters. Not sure of the current market on handmades but I’ll list it and listen to reasonable offers. $1000... lets try $750... $700... $600

Next up is a 10.5° TM Sim Max- Has stiff Tensei Pro Orange 60g shaft (RH adapter) and plays right at 45”. I bought on here and played around 5 rounds with it. Really solid driver but couldn’t beat my Epic Flash SZ/ADIZ combo. Lead tape added to get it to 200g and will remove upon request before shipping. Head cover included. $415...$400... $390... SOLD

 

Finally, 9° Epic Flash SZ head- Excellent condition. I hate trying to photograph these Callaway heads because of reflections but crown is very clean, only very minor paint chipping on toe of face/top line area. I tried to catch it in the photos but very minor. Great head but I’m better with the 10.5 set open. Headcover included. $175. SOLD!!!

 

Added TM P790/760 combo- 5&6 P790, 6-PW P760. These were a summer project I put together as the serial numbers are all matching on 7-PW. I bought individual clubs/heads to round out the set. PX LZ stiff shafts purchased from Will Peoples and custom ferrules added. Irons should be standard loft and lie but I haven’t checked them since I finished them. Length is also standard with the exception of the PW as it is a little more than 1/4” long. I took a picture of the P760 6 iron head as it has a T on the hosel. Not sure if it denotes a fitting head or what but plays fine. It does have a serial number as well. Also, I took a picture of a rock mark on the 7 iron. It isn’t as pronounced as the picture looks but I’d rather err on the side of worse before someone gets them and it wasn’t shown at all. Played for a total of six rounds and are so pure. I hit 14 greens with them today after struggling with my Apex a few rounds so I have decided to keep them.

 

[Guest]

Nice lot. This might be a stupid question, but is the RH adaptor for fitting a left handed head on a RH tip?

[jmac13]

The RH adapter on the shaft works just set in the opposite direction. If you want more loft, you would move toward lower trajectory setting. Hope that makes sense.

[jmac13]

Epic Flash SZ is sold!

[PixlPutterman]

What grip is on that putter?

[jmac13]

To be honest, I can’t remember ?. Almost positive it was some sort of sea creature but it’s been so long ago I can’t remember.

[amolefty24]

GDI you always have the sickest gear!! GLWS.

[jmac13]

Thanks and thanks!

[mylesb21]

Didn't turn down the ferrules on the P760/790's? Nice color though!

[jmac13]

No, I don’t have a belt sander to do it easily. Will take them to my pro and have it done if I keep them. Thanks for the color selection compliment!

[mylesb21]

I turn mine down by hand. It takes about 2-3 minutes each. 1) Tape off the hosel (to prevent scratching), 2) Use a 1” wide strip of 100-120 grit sandpaper to sand down the ferrule to closely match the hosel diameter, 3) Wet a paper towel with acetone to shine the ferrule and remove scratches from sanding, 4) Take a piece of old t-shirt (I use a linen belt sander and

use by hand) to get an extra shine on the ferrule.

When it’s done you’ll be amazed how great they look.

[thedanimal58]

Wish these were the 6.5LZ or I would snag them!!!!! GLWS Good looking set.

[jmac13]

Thank you

[minew1545]

Beautiful Mills.

I remember when David made that special putter.???

 

[jmac13]

Thanks. I try not to throw “super rare” out often but I thought it was appropriate here. True hand mades are rare, in lefty really rare and 1 b’s in lefty are super rare. ?

[jmac13]

Guess, I missed this earlier. Thanks for the tips. I may do this and update pictures.

[jmac13]

Sim Max is sold!

[pcfrederick]

PM sent!