We have launched our new enhanced Editor. There is an overview and tutorial Here.

TECH TALK: LIVE Q&A with KBS Shafts Tuesday Feb 14, 1-3pm ET!

12346»
6

Comments

  • KBS Golf ShaftsKBS Golf Shafts  187WRX Points: 0Sponsors Posts: 187
    Joined:  #152
    danfido wrote:


    Maybe a silly question, but was the purpose of the colored shafts just for customization? Is there any other conceivable benefit other than "This looks really sweet with my custom paintfill job."?




    dnfido,



    There are no silly questions here! The concept was customization and performance is the same. Customization has become huge in golf, but steel shafts had never been incorporated into the mix. Here we are introducting a unique option for golfers wanting that really sweet look.



    Thanks for your question,

    CM
    Posted:
  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • KBS Golf ShaftsKBS Golf Shafts  187WRX Points: 0Sponsors Posts: 187
    Joined:  #153
    mattw1106 wrote:


    Has the C-Taper been more of a success than you guys originally thought it would be?




    Mattw1106,



    The C-Taper has been a great success and, to be honest, we believe a lot of that is attributable to the WRX community. There are/were a lot of honest peer reviews at launch and soon after that tested us on our performance claims of 5% (lower launch, less spin, and more distance). And, as we expected when we put that out there, the claims held true in most instances.



    There wasn't a surprise so much there. We knew once people put it in play and gave it an honest run through they'd see the performance advancements. Each stage of R&D testing for this shaft verified our findings and against our competitors the difference was clear.



    On Tour, we've already got somewhere around 8-10 guys in the C-Taper shaft including the #1 US Golfer in the OWGR. That stat has been running pretty much since May of 2011 and came about following his first of 3 wins with the C-Taper shaft. This was a huge validation of the product. On Tour, we probably would've had a bit more success with it early on but the market demand emptied our inventory for about a month. And, as Kim would tell you, once you get a product moving on TOUR, you don't want to kill that momentum with no inventory. Luckily, momentum is really just starting. less than a year later, we have two top 20 OWGR players in the product and many more in the top 100.



    At the OEM level, we've been extremely proud how fast the C-Taper was adopted. We can't thank our fans and partners enough for the integration there. Within 6 months, the C-Taper was adopted by nearly every major manufacturer and is now available (in multiple flexes) in many of the '12 carts in the market. This was the most surprising factor for our team.



    Thanks,

    EH
    Posted:
  • KBS Golf ShaftsKBS Golf Shafts  187WRX Points: 0Sponsors Posts: 187
    Joined:  #154
    Knockdown wrote:


    What shafts do you recommend for ctaper players in their wedges?




    Knockdown,



    I play the C-tapers in my wedges. I llike the less spin, and consistent feel in the whole set. We have many tour pros doing that now. Just make sure you dont go too stiff. If you can hit your PW with an easy smooth swing, then you can use that same flex in the wedges.



    Thanks,



    CM
    Posted:
  • KBS Golf ShaftsKBS Golf Shafts  187WRX Points: 0Sponsors Posts: 187
    Joined:  #155


    Regarding the C-tapers: Saw a video of Kim Braly basically saying they fit a very small percentage of the golfing population. I probably shouldn't be playing them based on what he said but when I tried them out they felt so incredibly good and I got fitted --> turns out they fit me like a charm despite me not being having a beast swing speed or tempo. It was the feel that caught me, never really felt anything like it before. Can you elaborate on the feel of the KBS shafts and the C-tapers in particular - they really feel different from Proj X and DG IMO. Thanks






    even_steven,





    Yes the feel is great. Making a steel shaft is a very long and difficult process (over 25 manufacturing steps). Overall, there are design differences (taper rates, wall thickness, etc.) that set C-Taper apart from other low spin shafts and this is why it feels smoother.



    Thanks,



    CM
    Posted:
  • CarloGolferCarloGolfer  2506WRX Points: 68ClubWRX Posts: 2,506
    Joined:  edited Feb 14, 2012 #156
    Whoopsie
    Posted:
  • KBS Golf ShaftsKBS Golf Shafts  187WRX Points: 0Sponsors Posts: 187
    Joined:  #157


    Are there any plans to release a C TAPER HYBRID SHAFT? If not, could I strongly urge you to consider making plans?




    Carlo,



    We saw that WRX had posted on this following the PGA Show. There has been some discussion of this and we may decide to move forward with the project. Glad to know you're a supporter this early on!



    On a side note, the current Hybrid shaft is a great product and under-marketed from our perspective. The design mimics the KBS TOUR shaft and performs with a similar trajectory, feel and stability as the TOUR shaft. That said, we've discussed a C-Taper hybrid to complement the current Hybrid and we'll keep our community posted best we can via our newsletter and social media.



    Thanks,

    EH
    Posted:
  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • DenZ06DenZ06  367WRX Points: 61Members Posts: 367
    Joined:  #158
    I have loved the performance and feel of putting my C tapers in my 3 and 4 hybrids. Great flight feel and so consistent
    Posted:
  • ninebacknineback  19WRX Points: 0Members Posts: 19
    Joined:  #159
    So the playing characteristics of the shaft does not change. Just the custom colors. My assumption is we will pay extra for the cusomized look and not playing characteristics?



    Good work by the way.



    Tom
    Posted:
  • KBS Golf ShaftsKBS Golf Shafts  187WRX Points: 0Sponsors Posts: 187
    Joined:  #160
    Hi Everyone!



    Thanks again for all the questions! We're going to wrap this up now and call it a day but we tried to get through as many questions we could without bias which ones we answered. There were some awesome questions in there and we look forward to gathering your feedback as well. Please post your comments / thoughts to this thread on the all-new CUSTOM SERIES!



    If in case we missed your question and you're dying to know, please send our Customer Service an email using the following form ([url="http://www.kbsshafts.com/contactkb.php"]http://www.kbsshafts.com/contactkb.php[/url]) and we'll get back to you as soon as possible.



    Thanks again to the WRX team for organizing this and we appreciate all the support from the WRX community! Visit our website starting tomorrow for more information and giveaways on the all-new KBS CUSTOM SERIES!



    Cheers,

    - The KBS Team
    Posted:
  • Lefty1987Lefty1987  322WRX Points: 40Members Posts: 322
    Joined:  #161
    C-Taper hybrid shaft please!
    Posted:
  • Shaank0Shaank0  1213WRX Points: 50Members Posts: 1,213
    Joined:  #162



    Are there any plans to release a C TAPER HYBRID SHAFT? If not, could I strongly urge you to consider making plans?




    Carlo,



    We saw that WRX had posted on this following the PGA Show. There has been some discussion of this and we may decide to move forward with the project. Glad to know you're a supporter this early on!



    On a side note, the current Hybrid shaft is a great product and under-marketed from our perspective. The design mimics the KBS TOUR shaft and performs with a similar trajectory, feel and stability as the TOUR shaft. That said, we've discussed a C-Taper hybrid to complement the current Hybrid and we'll keep our community posted best we can via our newsletter and social media.



    Thanks,

    EH




    That would be pretty awesome, to come out with a C-taper hybrid shaft for sure.
    Posted:
  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • MCozMCoz Napa, CA 890WRX Points: 110Members Posts: 890
    Joined:  #163
    Taylormade just sent me the new ATV wedges for testing. These are the non-chrome versions, pre-marketing models. They have KBS Tours. I don't know if this is what they are going to use commercially or if they just did them for me because I have KBSs in my profile with them.

    My question is how are these different than the Hi-Revs which essentially have the same stepdown patternas far as I know. Or is the first stepdown 1/4 to a 1/2 inch higher up from the hosel? Thus a longer tip section? Because of the increased spin will I in effect lose a few yards in distance when compared to the Tours?

    I use the C-Tapers in my R9 TP-B irons. I don't hit them any farther but I do like the feel and smaller dispersion pattern.
    Posted:
    DRIVER- TaylorMade 2019 M5 - 460 Tour issue/Fuji Ventus 6 S
    3wd- TM M5 Fujikura Speeder 757 Evolution V -S
    5wd- TM M5 Fuikura Speeder 857 TR  S (serial # 0000010) 
    1i - Cleveland HiBore 16* Tour Dept 3.2 torque S tipped 1" (2-3i replacement)
    Tour 5 - TM RBZ Stg 2 23.5* Fuji MCH 80-S 
    Irons 4 & 5-TM M1 Fuji Pro 95i - S ,6 thru 9, PW TM P760 Fujikura Pro 95i-S
    SW- TaylorMade Hi Toe 56* (bent to 54* 4-way grind 105 Modus S
    LW- TaylorMade HI TOE- custom personalized grind 58* NS Pro 980 GH-S
    Putter- Bobby Grace-- M.Coz Bandsaw Prototype
    15 clubs, one options out depending on the course
  • ForTourUseOnlyForTourUseOnly Circle T  1144WRX Points: 177Members Posts: 1,144
    Joined:  #164
    Lefty1987 wrote:


    C-Taper hybrid shaft please!




    Agree CTaper hybrid shaft would be nice, but in a .355" T design that way it can fit into every hybrid/driving iron out there with a shim if need be. Either that or start making a CTaper 1 iron shaft
    Posted:
    Titleist TS3 8.5° w/ Mitsubishi Chemical Tensei CK Pro Orange 70 TX
    Titleist TS3 15° w/ Mitsubishi Chemical Tensei CK Pro Orange 90 TX
    Titleist U·500 3i w/ Mitsubishi Chemical Tensei CK Pro Orange 100HY TX
    Titleist CNCPT CP-02 4i-9i w/ True Temper Dynamic Gold Tour Issue X100
    Vokey BV HandGround SM7 Raw 46.10F, 50.12F, 54.10S, 60.08M w/ DG TI
    Scotty Cameron Roundback Select Tour Black 2.5 Weld Neck
    WITB Link
  • Dean WenselDean Wensel  29WRX Points: 0Members Posts: 29
    Joined:  #165



    There are already a lot of questions regarding weight but mine is slightly different, I was wondering if every color will be the same weight? I know with certain grips white weighs more because its a heavier dye, I don't know if the same will run true with the coating process you have used. Also why are these only available in taper?




    Hi Dean,







    Thank you for your question. The differenct colors do weigh the same. This is a patent pending process using three polyurethane coatings for each shaft. This makes for vibrant colors that have great durability. Taper tip heads are the most common on the market. Also, if you have a .370 hosel head you can use a shim to take up the extra space and it will perform the same.





    Thanks,







    CM












    KBS,





    Thank you for taking the time to answer my question, I am glad to hear color did not affect weight between different colors. I do play a taper tip, but was just curious as to why exclusively taper, hopefully we see this become more diverse as it becomes more popular.







    Thank you,







    Dean A. Wensel
    Posted:
  • ^m9^m9 ᕦ(ò_ó*)ᕤ  1385WRX Points: 108Members Posts: 1,385
    Joined:  edited Feb 15, 2012 #166
    PingDrv00 wrote:


    I am not sure if I am the only one with this issue, but I really have had some trouble with the KBS Tour 90's. I am not sure if it is the counter balance weighting or the total shaft weigh being less, but I really have trouble with solid contact. I can pick up the same head with Dynamic Gold or Project X, and dot the sweetspot. When I hit them solid, I do love the feel, but my thought is this shaft my not be the one for me. I really want to retain the smooth KBS feel, but get a better suited option. I guess mny first question would be, have any others experienced this performance, and what shaft might you recommend to alleviate it.




    And I thought I was the only one! I have had the same shafts (sitting in my garage now) and I experienced the same thing. I couldn't feel the shaft load; felt weird on the downswing, and I just couldn't hit the sweetspot in general...no idea why - weight, counter-balanced feel?



    I have no trouble hitting nice high flat iron shots with good old s300.



    Would KBS Tours be better for me? PXi?





    Nevermind, I see they answered the question. Thanks KBS!
    Posted:
    Post edited by Unknown User on

    Ping G400 LST - Tour 65x
    Callaway Epic Flash 3W - Tensei Blue 75x
    Callaway Epic Flash 5W - Tensei Blue 75x
    Ping G410 4H - Tensei Blue 80x
    Mizuno JPX 919F 5-PW - Modus 120x
    Titleist SM4 50F 54M 58S - DG Spinner
    TM Spider X - Navy Single Sight Line

  • jeff c.jeff c.  12WRX Points: 0Members Posts: 12
    Joined:  #167
    I am looking at the Ping G20's. I am playing older Ping ISI nickel clubs. Slightly smaller head and less offset. I am a bit nervous about taking the leap because I already have a high ball flight. I am profoundly in love with the G20 after hitting into a net on the weekend at Golfsmith. And absolutely HUGE! I have never seen performance numbers such as I experienced.



    I trialed the C-tapers on other clubs. How did you trial them on the G20? I think they could really help my ball flight with these clubs. What was the shaft upcharge?



    Thanks for any help.



    Jeff






    JGL wrote:


    I enjoy the C-Tapers on my PING G20s - really perform well and look great.



    Any way to incorporate the C-Taper into putter shafts ? And any plans on additional finishes/colors on the C-Taper ?



    Keep the exciting products coming !
    Posted:
6

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.