Jump to content
2024 RBC Heritage WITB photos ×

Camillo's Backup RBZ Iron Pics


GolfWRX

Recommended Posts

FYI - My "open letter" to Mr. Grumpy (or anyone else that doesn't understand why I called out UGotHustled with such zeal).

Mr. Grumpy,
Obviously you are fortunate to NOT have been burned for hundreds or thousands of dollars by scammers that use sites like WRX to lure victims into sending them money. I'm glad you haven't had this happen to you.
HOWEVER, many of us golf geeks HAVE been burned by guys using the EXACT technique that UGotHustled was using in the thread you commented on. It starts with "I've got a VERY rare head or set of irons that I will be selling soon....", and then some poor guy says "My paypal is ready when you are"..... and you can figure out the rest of the story. It happens a LOT.
Maybe you didn't realize this, or maybe you are friends with UGotHustled, I don't know. But I've been a member here since 2005, and THIS is the way we help each other out when we see someone that looks like they might be scamming. Why else would the guy make up a complete lie about these irons?
I was fortunate enough to receive a set of these irons during my trip to Doral for the TaylorMade RBZ Experience, and so I was in the unique position to know DEFINITIVELY that there were no such "other sets" floating around for sale.
Hopefully that will help you understand my zeal for calling this scammer out.
Someday, if you are in that position, and you see someone that might be trying to scam someone, you will do the same.
Regards,
Tim

Link to comment
Share on other sites

  • Replies 117
  • Created
  • Last Reply

Top Posters In This Topic

Feel free to post my seemingly now open PM communication back to you..

For the record, not friends with him, and yes I am fortunate enough to have not been scammed by a seller. However, I do not believe in continued belittling. Fora members are smart enough to get the gist on the first couple of comments.

Let me say it for you clear and without a lot of words - [b]Buyer Beware[/b], this has scam written all over it.....

Honma TR20 Vizard RED S

Callaway Fusion 3 Wood Recoil S

PXG 6-Gap TT Elevate S

Vokey SM8 50, 54, 58

Scotty Phantom X 5.5

 

Link to comment
Share on other sites

[quote name='Mikey K' timestamp='1339372374' post='5063480']
I talked to my pro about these today he says he does not have the full set but he has the 5 and 7 iron that he hated. He had TM make them because they looked very forgiving but more of a "players" iron. They are NOT the same as Camillo's because his CAN'T be replicated because they don't have the exact "molds" (or whatever they use to make clubs at a huge production rate) to make the SAME club again. Even for Camillo. He does not use them though because he said the feel and workability were awful compared to the TP MB. So i probably will not be the one getting pictures of them... neither will that other guy I am guessing he just wanted and extra post to add to his post count.

PS: He said many people who are sponsored by TM tested these but did not like them causing them to not make them anymore.
[/quote]

How did the 5/7 iron that your pro has compare to the CV irons listed in this thread?

Link to comment
Share on other sites

[quote name='TheMoneyShot' timestamp='1339377410' post='5063996']
[quote name='Mikey K' timestamp='1339372374' post='5063480']
I talked to my pro about these today he says he does not have the full set but he has the 5 and 7 iron that he hated. He had TM make them because they looked very forgiving but more of a "players" iron. They are NOT the same as Camillo's because his CAN'T be replicated because they don't have the exact "molds" (or whatever they use to make clubs at a huge production rate) to make the SAME club again. Even for Camillo. He does not use them though because he said the feel and workability were awful compared to the TP MB. So i probably will not be the one getting pictures of them... neither will that other guy I am guessing he just wanted and extra post to add to his post count.

PS: He said many people who are sponsored by TM tested these but did not like them causing them to not make them anymore.
[/quote]

How did the 5/7 iron that your pro has compare to the CV irons listed in this thread?
[/quote]

It was almost identical except the sole of the club was almost all of the "shiny" metal instead of half "shiny" and half matte.

Link to comment
Share on other sites

[quote name='Mikey K' timestamp='1339377848' post='5064050']
[quote name='TheMoneyShot' timestamp='1339377410' post='5063996']
[quote name='Mikey K' timestamp='1339372374' post='5063480']
I talked to my pro about these today he says he does not have the full set but he has the 5 and 7 iron that he hated. He had TM make them because they looked very forgiving but more of a "players" iron. They are NOT the same as Camillo's because his CAN'T be replicated because they don't have the exact "molds" (or whatever they use to make clubs at a huge production rate) to make the SAME club again. Even for Camillo. He does not use them though because he said the feel and workability were awful compared to the TP MB. So i probably will not be the one getting pictures of them... neither will that other guy I am guessing he just wanted and extra post to add to his post count.

PS: He said many people who are sponsored by TM tested these but did not like them causing them to not make them anymore.
[/quote]

How did the 5/7 iron that your pro has compare to the CV irons listed in this thread?
[/quote]

It was almost identical except the sole of the club was almost all of the "shiny" metal instead of half "shiny" and half matte.
[/quote]

They sound great. If he ever nabs a full set and wants to sell them please keep me in kind.

Link to comment
Share on other sites

  • 2 weeks later...

This is what I hate the most about equipment companys. They already have the molds made, so why not let these irons be custom ordered. I would bet if a store like Edwin Watts, Golf Smith, Golf Galaxy would buy 10 sets per store and they would priced in line with the standard set, they would sell them very easily. The demand is there. I would love to have a forgiving set of irons with amost no offset. Businesses are always looking for ways to increase sales and they have a easy way stairing them in the face but they are too blind to see it.

Link to comment
Share on other sites

[quote name='dj106' timestamp='1340498754' post='5155916']
This is what I hate the most about equipment companys. They already have the molds made, so why not let these irons be custom ordered.
[/quote]

You sure they have molds for these?

G430 9* Ventus Velo 7s
Titleist TSI2 15* DI7s

Ping G425 19* hybrid Accra TZ6
Tour Edge XCG 24* hybrid Altus
Srixon ZX5 MKII 6-pw
Ping Stealth 2.0 50*SS, S159 54/58*SS
TP Mills Tour Fleetwood

Link to comment
Share on other sites

[quote name='Qegurezi' timestamp='1340505411' post='5156476']
[quote name='dj106' timestamp='1340498754' post='5155916']
This is what I hate the most about equipment companys. They already have the molds made, so why not let these irons be custom ordered.
[/quote]

You sure they have molds for these?
[/quote]Are you serious? How else would multiple sets be made? I dont think someone is hammering these out by hand.

Link to comment
Share on other sites

[quote name='dj106' timestamp='1340505926' post='5156508']
[quote name='Qegurezi' timestamp='1340505411' post='5156476']
[quote name='dj106' timestamp='1340498754' post='5155916']
This is what I hate the most about equipment companys. They already have the molds made, so why not let these irons be custom ordered.
[/quote]

You sure they have molds for these?
[/quote]Are you serious? How else would multiple sets be made? I dont think someone is hammering these out by hand.
[/quote]

Well post #92 clouds the issue.

G430 9* Ventus Velo 7s
Titleist TSI2 15* DI7s

Ping G425 19* hybrid Accra TZ6
Tour Edge XCG 24* hybrid Altus
Srixon ZX5 MKII 6-pw
Ping Stealth 2.0 50*SS, S159 54/58*SS
TP Mills Tour Fleetwood

Link to comment
Share on other sites

[quote name='MizzyBYU24' timestamp='1340553857' post='5158350']
Looks like he's finally putting together a good tournament with them. I'll be cheering for him today. Too powerful and talented to not be winning at least a tournament a year
[/quote]

[quote name='MizzyBYU24' timestamp='1340553857' post='5158350']
Looks like he's finally putting together a good tournament with them. I'll be cheering for him today. Too powerful and talented to not be winning at least a tournament a year
[/quote]

He is going to need to go super low today in order for him to have a chance. It's nice seeing him on the leader board once gain.

Link to comment
Share on other sites

[quote name='hoganhawk' timestamp='1340562859' post='5158946']
I hope they are released and I can get the custom chalk markings on top. These are so much better looking than the weird and fake looking rbz retails.
[/quote]

Agreed! The retail version of the RBZ irons are so fugly. If TM would release an iron like this they would get more golfers under the RBZ umbrella. They make TP versions of the RBZ drivers, fwys and hybrids so why not do it for the irons too.

Link to comment
Share on other sites

Unfortunately we will never see the "Camillo version" available, as I just bought the last set of them from UGotHustled. :lol:

While the retail version of these irons may not be the prettiest irons out there, they are STUPID-easy to hit and are VERY long.

Full club+ longer than my Pings. About half of that distance gain is from the stronger lofts, but ONLY half. The other half-club distance gain is clearly from the design.

My ONLY issue with these irons (and I mean ONLY), is that they have just a bit too much offset for me. My Ping i15s have just a bit less offset, and I never lose a shot left (draw). Occassionally I would lose a shot left with my RBZs.

Pair the retail RBZ irons with Dynamic Gold shafts, and you will LOVE them.

My buddy (scratch player) has used Mizuno irons for years, and hit my RBZs on the range about a month ago. He LOVED them and immediately purchased a set. He threw up a 74 with a lost ball and 5 birdies today from the tips at Shadowhawk.

My point being, these irons will help ALL players, not just guys with high caps.

If you could use another 10-15 yards on each iron, and would benefit from a SUPER-easy to hit club, you should get past the busy cavity design and give these an honest shot. The topline is not bad at ALL to look down at either.

Tim

Link to comment
Share on other sites

[quote name='Tim Delgado' timestamp='1340569427' post='5159396']
Unfortunately we will never see the "Camillo version" available, as I just bought the last set of them from UGotHustled. :lol:

While the retail version of these irons may not be the prettiest irons out there, they are STUPID-easy to hit and are VERY long.

Full club+ longer than my Pings. About half of that distance gain is from the stronger lofts, but ONLY half. The other half-club distance gain is clearly from the design.

My ONLY issue with these irons (and I mean ONLY), is that they have just a bit too much offset for me. My Ping i15s have just a bit less offset, and I never lose a shot left (draw). Occassionally I would lose a shot left with my RBZs.

Pair the retail RBZ irons with Dynamic Gold shafts, and you will LOVE them.

My buddy (scratch player) has used Mizuno irons for years, and hit my RBZs on the range about a month ago. He LOVED them and immediately purchased a set. He threw up a 74 with a lost ball and 5 birdies today from the tips at Shadowhawk.

My point being, these irons will help ALL players, not just guys with high caps.

If you could use another 10-15 yards on each iron, and would benefit from a SUPER-easy to hit club, you should get past the busy cavity design and give these an honest shot. The topline is not bad at ALL to look down at either.

Tim
[/quote]

The only thing I don't like is from the 5 iron down with these irons. I was hoping that maybe we would see a refined TP set that would appeal more to the eye at address. These irons are long without a doubt but extremely ugly from the 5 iron down. Hopefully something cleaner will be released in the next offering.

Link to comment
Share on other sites

  • 2 months later...

[quote name='dunk7' timestamp='1338319270' post='4995424']
I have three questions for those that like the looks of this iron

1. How do you think they look compared to the Adams CMB's?
2. Do you wear Lime Green on a regular basis?
3. Do you wear spandex more than 4 times a week?
[/quote]

I have two questions in response to your three

1. How much has the "player's" iron design changed over the past decade or two?
2. What's wrong with wearing lime green spandex more than 4 times a week (do boxer briefs count)?

Link to comment
Share on other sites

[quote name='Qegurezi' timestamp='1340505411' post='5156476']
[quote name='dj106' timestamp='1340498754' post='5155916']
This is what I hate the most about equipment companys. They already have the molds made, so why not let these irons be custom ordered.
[/quote]

You sure they have molds for these?
[/quote]
Heard earlier in the year that each head was milled rather than cast. TM isn't holding out, these were as custom as it gets...

Link to comment
Share on other sites

[quote name='dkolarik' timestamp='1346413474' post='5564899']
[quote name='Qegurezi' timestamp='1340505411' post='5156476']
[quote name='dj106' timestamp='1340498754' post='5155916']
This is what I hate the most about equipment companys. They already have the molds made, so why not let these irons be custom ordered.
[/quote]

You sure they have molds for these?
[/quote]
Heard earlier in the year that each head was milled rather than cast. TM isn't holding out, these were as custom as it gets...
[/quote]

Exactly.

G430 9* Ventus Velo 7s
Titleist TSI2 15* DI7s

Ping G425 19* hybrid Accra TZ6
Tour Edge XCG 24* hybrid Altus
Srixon ZX5 MKII 6-pw
Ping Stealth 2.0 50*SS, S159 54/58*SS
TP Mills Tour Fleetwood

Link to comment
Share on other sites

  • 5 years later...

They look good. I never hit the original RBZ, but have hit the RBladez and Speedblades. How do these feel? Super clicky, or are they softer at all.

TM M4 8.5 Atmos Red

TM Original One Mini 13.5 Diamana F

TM Sim TI 5 wood Diamana F

Sub 70 TAIII 4&5 KBS $-Taper Lite

Sub 70 649 6-P KBS $-Taper Lite

Sub 70 286 50,54 KBS $-Taper Lite

Edel D-Grind 58 KBS Tour Rev 2.0

LAB Directed Force 2.1 73* 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Our picks

    • 2024 RBC Heritage - Discussion and Links to Photos
      Please put any questions or comments here
       
       
       
       
       
      General Albums
       
      2024 RBC Heritage - Monday #1
      2024 RBC Heritage - Monday #2
       
       
       
       
      WITB Albums
       
      Justin Thomas - WITB - 2024 RBC Heritage
      Justin Rose - WITB - 2024 RBC Heritage
      Chandler Phillips - WITB - 2024 RBC Heritage
      Nick Dunlap - WITB - 2024 RBC Heritage
      Thomas Detry - WITB - 2024 RBC Heritage
      Austin Eckroat - WITB - 2024 RBC Heritage
       
       
       
       
       
      Pullout Albums
       
      Wyndham Clark's Odyssey putter - 2024 RBC Heritage
      JT's new Cameron putter - 2024 RBC Heritage
      Justin Thomas testing new Titleist 2 wood - 2024 RBC Heritage
      Cameron putters - 2024 RBC Heritage
      Odyssey putter with triple track alignment aid - 2024 RBC Heritage
      Scotty Cameron The Blk Box putting alignment aid/training aid - 2024 RBC Heritage
       
       
       
       
       
       
      • 5 replies
    • 2024 Masters - Discussion and Links to Photos
      Huge shoutout to our member Stinger2irons for taking and posting photos from Augusta
       
       
      Tuesday
       
      The Masters 2024 – Pt. 1
      The Masters 2024 – Pt. 2
      The Masters 2024 – Pt. 3
      The Masters 2024 – Pt. 4
      The Masters 2024 – Pt. 5
      The Masters 2024 – Pt. 6
      The Masters 2024 – Pt. 7
      The Masters 2024 – Pt. 8
      The Masters 2024 – Pt. 9
      The Masters 2024 – Pt. 10
       
       
       
      • 14 replies
    • Rory McIlroy testing a new TaylorMade "PROTO" 4-iron – 2024 Valero Texas Open
      Rory McIlroy testing a new TaylorMade "PROTO" 4-iron – 2024 Valero Texas Open
        • Haha
        • Like
      • 92 replies
    • 2024 Valero Texas Open - Discussion and Links to Photos
      Please put any questions or Comments here
       
       
       
      General Albums
       
      2024 Valero Texas Open - Monday #1
      2024 Valero Texas Open - Tuesday #1
       
       
       
       
       
      WITB Albums
       
      Ben Taylor - WITB - 2024 Valero Texas Open
      Paul Barjon - WITB - 2024 Valero Texas Open
      Joe Sullivan - WITB - 2024 Valero Texas Open
      Wilson Furr - WITB - 2024 Valero Texas Open
      Ben Willman - SoTex PGA Section Champ - WITB - 2024 Valero Texas Open
      Jimmy Stanger - WITB - 2024 Valero Texas Open
      Rickie Fowler - WITB - 2024 Valero Texas Open
      Harrison Endycott - WITB - 2024 Valero Texas Open
      Vince Whaley - WITB - 2024 Valero Texas Open
      Kevin Chappell - WITB - 2024 Valero Texas Open
      Christian Bezuidenhout - WITB (mini) - 2024 Valero Texas Open
      Scott Gutschewski - WITB - 2024 Valero Texas Open
      Michael S. Kim WITB – 2024 Valero Texas Open
       
       
       
      Pullout Albums
       
      Cameron putter - 2024 Valero Texas Open
      Ben Taylor with new Titleist TRS 2 wood - 2024 Valero Texas Open
      Swag cover - 2024 Valero Texas Open
      Greyson Sigg's custom Cameron putter - 2024 Valero Texas Open
      Davis Riley's custom Cameron putter - 2024 Valero Texas Open
      Josh Teater's custom Cameron putter - 2024 Valero Texas Open
      Hzrdus T1100 is back - - 2024 Valero Texas Open
      Mark Hubbard testing ported Titleist irons – 2024 Valero Texas Open
      Tyson Alexander testing new Titleist TRS 2 wood - 2024 Valero Texas Open
      Hideki Matsuyama's custom Cameron putter - 2024 Valero Texas Open
      Cobra putters - 2024 Valero Texas Open
      Joel Dahmen WITB – 2024 Valero Texas Open
      Axis 1 broomstick putter - 2024 Valero Texas Open
      Rory McIlroy testing a new TaylorMade "PROTO" 4-iron – 2024 Valero Texas Open
      Rory McIlroy's Trackman numbers w/ driver on the range – 2024 Valero Texas Open
       
       
       
      • 4 replies
    • 2024 Texas Children's Houston Open - Discussion and links to Photos
      Please put any questions or Comments here
       
       
       
      General Albums
       
      2024 Texas Children's Houston Open - Monday #1
      2024 Texas Children's Houston Open - Monday #2
      2024 Texas Children's Houston Open - Tuesday #1
      2024 Texas Children's Houston Open - Tuesday #2
      2024 Texas Children's Houston Open - Tuesday #3
       
       
       
       
      WITB Albums
       
      Thorbjorn Olesen - WITB - 2024 Texas Children's Houston Open
      Ben Silverman - WITB - 2024 Texas Children's Houston Open
      Jesse Droemer - SoTX PGA Section POY - WITB - 2024 Texas Children's Houston Open
      David Lipsky - WITB - 2024 Texas Children's Houston Open
      Martin Trainer - WITB - 2024 Texas Children's Houston Open
      Zac Blair - WITB - 2024 Texas Children's Houston Open
      Jacob Bridgeman - WITB - 2024 Texas Children's Houston Open
      Trace Crowe - WITB - 2024 Texas Children's Houston Open
      Jimmy Walker - WITB - 2024 Texas Children's Houston Open
      Daniel Berger - WITB(very mini) - 2024 Texas Children's Houston Open
      Chesson Hadley - WITB - 2024 Texas Children's Houston Open
      Callum McNeill - WITB - 2024 Texas Children's Houston Open
      Rhein Gibson - WITB - 2024 Texas Children's Houston Open
      Patrick Fishburn - WITB - 2024 Texas Children's Houston Open
      Peter Malnati - WITB - 2024 Texas Children's Houston Open
      Raul Pereda - WITB - 2024 Texas Children's Houston Open
      Gary Woodland WITB (New driver, iron shafts) – 2024 Texas Children's Houston Open
      Padraig Harrington WITB – 2024 Texas Children's Houston Open
       
       
       
       
      Pullout Albums
       
      Tom Hoge's custom Cameron - 2024 Texas Children's Houston Open
      Cameron putter - 2024 Texas Children's Houston Open
      Piretti putters - 2024 Texas Children's Houston Open
      Ping putter - 2024 Texas Children's Houston Open
      Kevin Dougherty's custom Cameron putter - 2024 Texas Children's Houston Open
      Bettinardi putter - 2024 Texas Children's Houston Open
      Cameron putter - 2024 Texas Children's Houston Open
      Erik Barnes testing an all-black Axis1 putter – 2024 Texas Children's Houston Open
      Tony Finau's new driver shaft – 2024 Texas Children's Houston Open
       
       
       
       
       
      • 13 replies

×
×
  • Create New...