GolfWRX Giveaway! Custom $2,000+ Damascus Steel MACHINE Putter! Enter Here!

[Hoot151]

M4 Meritage with single bend shaft over stud. Hand touched oil.

[Geo]

I don't enter very many contests, but this is one I want! Were I selected, I'd roll with a [color=#282828]lefty M10 fixer, heavily melted with a tig-welded Square Cut plumber neck, with either a flat milled, fly milled, or shallow cut VMG face, sight line on the flange, with the acid treatment to bring out the grain and oil can finish, or whatever Dave recommended. Unless there's the option for the stainless Damascus/Mokume, in which case, bonus! Less maintenance! Spec'd out to 33", 350 grams, 70* lie, 3* loft, and, as before "GARBAGE" stamped in the cavity.[/color]

[color=#282828]Fingers are all crossed. [/color]

[Doc420]

M20 with hand bent neck, half shaft offset,35 in at least 350 grams 3.5 loft, lie 69 torched finish oil quench.

[Jonnybagadonuts]

Flow neck style , flat black. M20 with 4 degrees of loft with
A 72 lie angle..... wow

[jah7838]

M10 full offset and weighs 352g. Sweet looking putters!

[EbenSalgado24]

34 inches. plumbers neck, make it a mallet type putter with high moi, have a sight line on top if putter and have it lay 1degree up

[aussielefty]

[b] [url="http://machineputters.gostorego.com/products/machine-putter-m2a-hand-bent-hosel-fat-back.html"]M2A - HAND BENT HOSEL - FAT BACK[/url] in left hand @ 33.5 inches. acid etched finish.

Would be stoked to win! Thanks for the chance.[/b]

[dtaylo56]

M2A Convertor with Deep Bite Bongo Back (DB3) flange and BBQ Rib Short hand bent neck in Acid Etch finish

34" 355-360g 71 lie 3 loft

Thanks Machine this is an amazing giveaway

[BlkNGld]

M2A fixer w/square cut plumbers neck
Beefy back
355g
Vertical Milled Grooves
Hot salts gun metal blue finish (I seem to change my mind between this and the hot salts and hand torched oil quenched, so I reserve the right to change my mind, lol)
Tapered shaft
34" length, 70 deg lie, std loft
Sightline on entire flange, no paintfill
Black Iomic midsize grip
Logo milled in cavity and bottom, no paintfill.

[3_Jack_Par]

OMG, what an amazing giveaway!

I'd want to go with an M2A Converter Fat Back with hand bent hosel, in Hand Torched Oil Quenched finish
34", 70* lie, no sight line

No other custom work that I can think of -- I like a pretty clean look, especially with beautiful materials like Damascus.

[Panteradon]

Count me in on this great giveaway!!!

[b] MACHINE PUTTER M20 CONVERTER WITH MEDIUM SHORT PLUMBERS NECK[/b]

Mokume Gane
Dog and Ball Logo
Right Handed
Red Paint fill
Areotech steel fiber shaft
30 inch length
Lamkin Grip
standard Loft
72 degree lie
[color=#282828][size=5]Hand Torched Oil Quenched[/size][/color]

[Fyparr]

M10 Art, fixer, standard PN, sight line in cavity

[brochblue72]

M20 converter with square cut plumbers neck
Machine logo (damascus steel plate)
hand torched/oil quenched
Right handed
350g
Black paint fill
single flange sight line
UST FF shaft (35")
Standard loft & Lie
super stroke ultraslim (black) grip

[conrad]

[b] [color=#222222]M10 Mini[/color][/b]

34.5 in
70 deg lie
3 deg loft
TMG-16
1018 Carbon Steel

[ucdan5]

34"
M2A
Stubby Plumbers Neck
Acid Etch
Deep VMG
Delrin Spacer
Reverse Arch Grip
Beefy Back w/ rounded edges
Dot on top
Double sight line
Dog Logo instead of db logo on front heel

[ucdan5]

34"
M2A
Stubby Plumbers Neck
Acid Etch
Deep VMG
Delrin Spacer
Reverse Arch Grip
Beefy Back w/ rounded edges
Dot on top
Double sight line
Dog Logo instead of db logo on front heel

[sleuth]

- M2A Fat Back
- Hand Bent Hosel medium
- Hot Salts Gunmetal Blue
- 34"
- loft - 2.5*
- lie - 70*

[Warrick]

[b]MACHINE Putter M9 Converter with Square Cut Plumber Neck - [color=#282828][size=5]Hand Torched Oil Quenched[/size][/color][/b]

[b]Logo medallion - Red Anodized[/b]
[b]Engraving - PrimeTime[/b]
[b]Handed: Right[/b]
[b]Paint fill: White[/b]
[b]Shaft type: Aerotech steel fiber[/b]
[b]Length - 33.5"[/b]
[b]Loft - 3 degrees[/b]
[b]Lie 72[/b]
[b]Grip: Super Stroke 3.0 red/white[/b]

[T-Bone84]

M9 Converter with short hand bent hosel, sight dot, hand torched finish.

36", STD lie, 4* loft

[jgdarb87]

I would LOVE the M2A - Plumber Neck - Heavy Blade Back, Hand Torched Oil Quenched 34".

[Dpavs]

MACHINE Putter M20 Converter with Modular Center Over Shaft - Over
33.5"
2.5* loft
72* lie
UST FF Shaft
Mokume Gane Medallion of Dog and Ball
Acid Etched Finish
Black Fill

Come to me oh putter of my dreams!!!!!
Skull Spot
MACHINE Headcover - ART Series in Black with Polka

[OLD_MAN_ESCO]

Lefty 34"
Hand oil quenched demascus steel
M9 full offset gooseneck
Vmg grooves
No paint fill
Mokume insert (birdie MACHINE) if possible
Proto 1 of 1 with dog logo on bottom
365g head
Black shaft
Standard loft 1 degree flat
No sight line
Machine reverse grip grip
Please & thank you.

[espressoo]

MACHINE PUTTER M20 CONVERTER WITH MEDIUM SHORT PLUMBERS NECK

33"
Red lettering
Red screws
Red iomic grip

[m2daRizzle]

M20 converter with medium plumbers neck. Blade back with a copper spacer.

Acid etch finish.

Milled sight line on flange and topline.

Vmg face.

Copper machine medallion for cavity.

34" long, 3* loft, 2* flat with a salty grip.

[bu11dog]

This is freaking sweet...

I'd do a 4.0 M2A with a double bend shaft - fat back in 33 inches as close to 350 grams headweight as possible (if not heavier)

For a finish I'd do the acid etch and in the cavity on the back or on the bottom of the putter it would be cool to see Punisher logo.

[rustyputterguy]

M2A Converter, modular center shaft over, fat back, hand torched oil quenched.
We can go over the other specs when I fly down for a fitting.

This is the greatest giveaway ever. The Machine thread is like putter porn to me.

[59Mr.59]

M20 converter with long plumbers neck, 34.5", 70* lie and 2.5* loft with just the skull as a sight dot in gun blue please!
Thanks for this giveaway!

[titleist1]

M2a Plumber Neck fatback 33", Hand torched oil quenched,