Jump to content

wkubrandon

Members
  • Content Count

    24
  • Joined

  • Last visited

Community Reputation

0 Neutral
  1. [quote name='TLT_Dan' timestamp='1359167548' post='6300095'] [quote name='wkubrandon' timestamp='1359164426' post='6299751'] Searched and can't find the answer...I game a kai'li 70s in my r11. I am considering putting my 3 wood rbz tp HD6 in it. What would be the downside to doing this. I would think the HD6 would play stiffer because of the weight reduction between the 3 wood and driver but I'm curious about the effect of the length change. Since its 20 degrees outside I won't be able to test or out for a while [/quote] How much shorter are you talking? I build many drivers at reduced
  2. Searched and can't find the answer...I game a kai'li 70s in my r11. I am considering putting my 3 wood rbz tp HD6 in it. What would be the downside to doing this. I would think the HD6 would play stiffer because of the weight reduction between the 3 wood and driver but I'm curious about the effect of the length change. Since its 20 degrees outside I won't be able to test or out for a while :(
  3. I thought about putting the 3w rbz tp HD6 shaft in my driver to help with accuracy. I've been gaming a kai'li std length and I'm only about 5'6 so it was probably too long anyway. The tip seems the same except for the extra .5 of adjustability. I'm assuming that I wil probably lose distance but I was wondering about how much of a loss it would be. Are we talking 5 yards or 20? Any input would be helpful.
  4. [quote name='mac94' timestamp='1358740259' post='6268263'] Ozark HD6? Is that John Daly's new shaft? [/quote] Ha no I'm using the mobile version and my iPhone auto corrected haha
  5. Picked up a matrix ozark hd6 very cheap to play around with. It's out of a R11s. Right now I play a 70g Kai'li in my R11 and I was curious to see how you guys thought the two would compare. Im expecting that I will see higher launch and spin numbers. Can't wait to get it on the range!
  6. The last few weeks I have had a violent slice with my driver. My irons flight straight with a slight draw. The slice with my driver flies very high(even though I have adjusted my driver to 8* at times) and straight for about 175-200 yrds and then dives right. What in the heck could cause my irons to fly straight and my driver to slice so horribly? Is there anything that I could try that may help fix it? I know its near impossible to say what I could be doing wrong but Im desperate.. I'll try anything! Thanks!
  7. I know that one goes inside the head where the adapter sleeve gets inserted...but is there supposed to be one on the back of the sole plate? I took the sole plate off and one fell out but I didnt want to torque it down in the wrong place.it looks like it sits right in the middle on the back of the plate. Are there supposed to be washers on the weights as well?
  8. customer serviceThe first time I dealt with their customer service it was over a set of burner irons. They replaced all of the shafts in them free of charge a year and a half after I had purchased them. When they sent my irons back they had the stock crappy Taylormade grips on them instead of the grips I had. I called customer service to see what they would say and they shipped me 23 (not sure how they came up with that number) GP New Decade grips...free. Today I called them about the used R11 TP that I ordered from Global Golf. All of the screws were a little worn and I told them that I did
  9. Got my R11 TP yesterday from Global Golf. When I was moving some of the adjustments today it seems like my torque wrench isn't working. Maybe I'm just being too cautious but it seems like everything has to be crazy tight for the wrench to click. Have you guys ever heard of a faulty wrench? I feel like I'm going to strip the screws! Can you even replace the screws if something like that were to happen? I'm an adjustable driver noob. :fool:
  10. need some help and info choosingI need some info on push carts. Ive never owned one so any info would help. I would rather not pay 180 bucks for the clicgear but if its the best by far then I dont mind. Any other suggestions would be great too. Thanks.
  11. [quote name='scottiet' timestamp='1331902357' post='4518781'] 910D3 was the ticket for me. Much lower spin with Project X shaft and look is Titleist classy. I have a r11 in the for sale section. It has a stock shaft, but we could work a deal on the head if you were interested. It is a 9*. [/quote] PM me a price.
  12. [quote name='lukesmurf59' timestamp='1331518525' post='4486459'] These are two very different heads. The SuperDeep is much, much lower spinning. The supertri is a mid to even high spin driver head for many people. I hated the Supertri but the Superdeep was one of my favorite drivers, nearly bought it but the FT Tour was just a little bit better. The Supertri is a full 460cc head while the Superdeep is 440. The superdeep is so named because of its incredibly deep face and is better for high spin players. What are your swingspeed, launch angle and spin rate numbers like? [/quote] SS abo
  13. Need some information on theseI just wanted some input on these two clubs. I don't know much about them but a local place has a ton of them used so I thought about trading in the FT-5. Is there much performance difference between the two? How would these compare to the R11? I like the idea of the lower spinning/launching superdeep but not if its much harder to hit than the tri. Any input or thoughts would be helpful before I demo them.The one that I am most interested in is a superdeep tp 10.5 with a real RIP 70g.
  14. [quote name='[email protected]' timestamp='1330908799' post='4436439'] News to me, I sold quite a few last week. [/quote] Yeah, I heard it Saturday. I was a little annoyed because I was planning to buy one.
×
×
  • Create New...