Jump to content


Advanced Members
  • Posts

  • Joined

  • Last visited

Everything posted by eddiebigeddie

  1. Yup Adler is a great dude. Done several deals with him over the years and ALWAYS has the BEST collection of putters and covers! LUCKY!
  2. Good afternoon everyone. End of season clear out and not hurting for money. All prices include PayPal fees and shipping to the lower 48 states. Not looking for trades at this time. preview: 1. Srixon Z565 irons with Recoil 110 shafts (5-Aw) 2. Pxg 0211 (original) irons with Elevate Tour shafts (5-Gw) 3. Mannkrafted Ma55 putter 4. Odyssey Strokelab Ten putter 5. Cobra Radspeed XB season opener driver head. 1. Srixon Z565 irons. Ok so here’s the deal with these irons. I bought these new (7-Pw), then added a new Z585 Aw because I couldn’t get a Z565 one. Then also found a used 565 6 iron and a new Cleveland UHX 5 iron (more forgiveness. I found me some Recoil 110 F5 (xstiff) shafts and had Will Peoples build them up for me. They are standard length based on a 38” 5 iron and 62’ lie angle with D3 swing weight. Lofts are 5-23, 6-26, 7-30, 8-34, 9-39, Pw-44, Aw-49. Added the new at the time Winn Dri tac oversize grips (like a midsize Golf Pride). I played them this year for approximately 20 rounds of gold and cleaned them after every single round. In very good shape with minimal brush marks on the soles. These irons and shaft combos are silky smooth. Asking $800 $780 shipped 2. Pxg original 0211 irons with True Temper Elevate Tour Xstiff shafts. (5-Gw). I bought these new in July of 2019 and played them for roughly 40 rds from then until the fall of 2020. I had the new golf pride tour velvet align midsize grips installed about 5 rds before I quit playing. These are great irons and the ball really just wants to go straight. Played some of the best golf of my life with these but I’ve since moved on to another set of clubs. The 5, W and G each have a nick/scratch on the sole with the 5 being the worst from hitting stupid rocks underneath some pine needles. Irons are standard Pxg length and Sw with a +1’ lie angle. Asking $600 $575 shipped. 3. Mannkrafted Ma-55 34” putter. I had the awesome Lamont Mann (Mannkrafted) build me this putter earlier this year and played it on and off this season. It’s a carbon head with Stainless flow neck and graphite shaft. Has a stock Mannkrafted midsize pure grip and stock Mannkrafted putter cover (black-not pictured). This is #3 of the Carbon putters he’s designed in this head style. The head weight is at 350g, has a smooth tri sole with beached sound slot and Black oxide finish on it. I also had him install a 3D site dot on the top line. I love this putter and am gonna have another built after I get some things worked out. Asking $640 $620 4. Odyssey Strokelab Ten 33” putter. This is a putter I bought for my 14 yr old son to use this season, but it didn’t fit his stroke as well as we hoped so it’s been sitting in his room most of the year. In good used condition with just paint wear to areas of the head. No cover but will ship well protected. Asking $140 $125 5. Cobra Radspeed XB Season Opener driver head or complete club. I bought this new when it was released in April and played it for 2-3 rounds. The shaft is the Hzrdus Green 60s in Pvd green. It’s an awesome driver, but I fell into another driver by accident. This is all stock with exception of a new Golf Pride NDMC Align grip to match shaft. I do also have the stock Lamkin with Arrcos grip. Stock limited cover included (not pictured). will sell head for $375 $360 or compete club for $540 $525
  3. The Adam’s A tour irons were originally designed for Ernie Els…apparently they were “limited” but eventually got blown out on a few online sites. They’re very good irons (I owned 3 sets at one point). They came with Kbs tour shafts and Iomic grips. Very underrated irons that had a few complaints…one the were very hard to bend and two the copper underlay shown through fairly easy on the faces with a little play. These came out during the Adam’s/Taylormade acquisition.
  4. Still absolutely LOVING mine. A buddy of mine that’s a scratch golfer hit it a few times last week when we played a scramble, now he wants one too. He’s been playing an Taylormade M3 since it came out because he couldn’t find anything to kick it out…we’ll he did now.
  5. They’ve changed the price 1-2x’s since end of August. They were $139/$129 and now $149/$139
  6. It was a company I found on EBay of all places. They did the custom finish and added the site dot.
  7. Odyssey Metal X Mille Versa #9Ht best of them all. Nice soft feel, not clicky at all compared to the Scottys. Here’s my custom one.
  8. ^^^my thoughts exactly
  9. I play the Lz 6.0 in my new mizuno 921 Hot Metals and just took out of the bag a set of Srixon Z565’s with Recoil 110 F5’s. Like others have said the Standard recoils play a little softer to flex, so I went with the F5 (x-stiff) and they are perfect. The only thing I wish is that they were about 7-8 grams heavier (in the 118-119g range). I think so far at least (only 2 rds) that the Recoils are slightly lower launching vs the Lz’s but for me still hit the window I wanted. Spin is on the mid to mid low. And I can 100% say I didn’t have any elbow or wrist soreness any time I finished playing with my set since switching to graphite. I will more then likely switch my Mizunos to graphite if I have any issues with them. I also have tried Steelfiber 110’s didn’t like them felt dead to me, Recoil 95’s felt good but too light, haven’t had the opportunity to try any of the others in the 110+ weight range yet.
  10. Just circling back to say how awesome this Gen4 driver is. LOVE MY GEN4 0811x!!!!!!!!
  11. My Gen4 X came with a 10g and (2) 2.5g weights. I ordered it stock length 45.5" with a Diamana 60s. My Proto I had, came with a 15g & (3) 2.5g weights.
  12. 1. Handicap? 10.1 2. Right or left hand golfer? Right 3. Current wedges and setup? Srixon Z585 Aw (50'), Cleveland Zipcore 54/12', Taylormade Hi-Toe 60* 4. Why do you want to be fit for TaylorMade MG3 wedges? The Clean look from previous TM wedges in a very good way. I've dabbled with Tm Wedges over the years just haven't foudn the right ones in the Aw/Sw spots. But I do LOVE my Hi-Toe, been in the bag since they came out. 5. Are you available to be on site 8/30/2021 through 9/1/2021? Yes 6. Will you be able to provide your own transportation to and from Reynolds Lake and East Lake Golf Club? Yes 7. Are you willing to post high quality photos in the forum, write an in depth review of the experience, and possibly be featured on GolfWRX or TaylorMade social media posts? Yes
  13. I’ll also add, driving up until this year was always sporadic (good days and bad, but would generally cost me 3-4 strokes a round from being in trouble off the tee) since the switch to the Gen4 if I have 1 bad drive in the round it’s very very minimal and still in play.
  14. I started the year as a 14.6 handicapper, bought the Gen4 X when it came out and I’m very happy to say that this driver has helped me drop to a 10.1 currently.
  15. Can’t speak for left handed, but the 921 Hot Metal are great irons (just received my set I’ve had on order since end of June. They feel great, perfect size head smaller than most GI irons and look sexy. Can’t go wrong with them. as far as the shaft, I’ve only swung it trying a demo club, but it isn’t in my range for shafts so I usually don’t even pay attention to it as it’s way to light for me and get it swapped for a heavier shaft.
  16. With your swing speed of 105-110, I'd go with an x-stiff or a heavy (70's g) stiff. And for me the Riptide wasn't very good for a left miss. You'll want something stiffer like the Hzrdus Yellow.
  17. I get that PXG wants you to be able to see the difference's of the silver/black and black/silver...but it would be so cool of them to let you do the silver/silver or black/black on the screws. Really make the heads clean looking with just the PXG logo in contrasting colorway.
  18. I like the look personally as I tend to play colored balls over plain white. And it is really cool to see how the balls spins when hitting off of any clubs in my bag. @Srixon, send some my way for testing
  19. True, but for me despite the clickyness they didn’t perform better then my 565’s. Or the other irons I tried for that matter. So for ME, based on all the factors (sound/feel, dispersion, distance, ball flight) they didn’t perform…but I’m sure they will for others.
  20. I had a set of the Zx4 on order back in May, but due to the long wait I dropped the order and man am I glad I did. I finally had the chance to hit these over the weekend at a Golf Galaxy and they were loud and super clicky. I currently play a set of Srixon Z565 irons and they are just so pure and soft feeling compared to the Zx4’s. I was able to hit the Zx4’s against a Pxg Gen3 P iron, My 565, Mizuno 921 HM and Ping 710. For me in order of feel and forgiveness it was…Pxg, Hm, 710, Z565, Zx4. Now don’t get me wrong the Zx4 look really good, but the feel/sound just didn’t compare vs the 5 series and those are just as forgiving for me.
  21. Same here, driving was always just so so for me. Got the Proto and fitted shaft (Ventus Blue) and it was really good. Then got the Gen4 0811x and put a Hzrdus Smoke Green in it and WOW, driving game went from so so to now a WEAPON in my bag. No chance this driver leaves my bag.
  22. I'm happy to announce that mine showed up today. 7 weeks & 2 days from the time of order to delivery.
  • Create New...