Jump to content

azgreg

Advanced Members
  • Posts

    1,028
  • Joined

  • Last visited

Everything posted by azgreg

  1. My "normal" set-up is 3W, 5W, and 7W (no hybrids). On the occasion when I believe I will use a lob wedge (not very often) I will pull the 3W and 5W and put in the 4W with the lob wedge.
  2. [quote name='wolfpack' timestamp='1349207106' post='5739353'] Just went to a V steel 7 wood recently. The results so far have been very promising. [/quote] I play one with a TT DG S300 cut to 40.5". Love it.
  3. You are right they are MMBs. All the writing is on labels. The shafts are stepped.
  4. I recently purchased some used irons (Maltby MBB), and I'm not sure who made the shafts. After removing the grips and tape there are green and white stickers at the butt end of the shafts. The green portion had 6.5 on all shafts and the white portion stated which club (6i, pw, etc.). They measure .370 parrallel and .600 butt. Thanks.
  5. [quote name='Empros' timestamp='1348363705' post='5679709'] After reading so many great things, I pulled the trigger and got a v steel 3 wood for very cheap off ebay. It hasn't arrived yet, but it's fitted with a standard flex steel shaft. Any recommendations for the best shaft in this bad boy? [/quote] Hit it with the steel first, give yourself a baseline. Heck, maybe you will like the steel, I sure as hell do.
  6. [quote name='mr_duffer' timestamp='1347402334' post='5625449'] I have a Tour Issue 22* Rescue Mid/ Speeder 904HB Stiff (oldest club in my bag). It's a lot of fun to hit. [/quote] When I play a hybrid to replace my 3i I use a 22° TM Rescue Mid as well. However, currently I am using a 21° TM V-Steel 7w.
  7. Cleveland CG2, but I'm always lookin.
  8. I have a sunday bag that I use when I walk. Driver 4W 4H 5I 7I 9I PW SW Putter. Weighs about half of my full regular carry bag.
  9. If got a TT DG S300 in my TM R580 at 43.5" and love it.
  10. [quote name='wolfpack' timestamp='1346610352' post='5574767'] v steel [/quote] [quote name='RAGING BULL' timestamp='1346613310' post='5574919'] [quote name='wolfpack' timestamp='1346610352' post='5574767'] v steel [/quote] +1. I have one in my bag. [/quote] +2
  11. azgreg

    3wd help

    Well if you don't want to go the 4W route maybe a 15° 3W instead of the 13.5°.
  12. [quote name='driverwedge' timestamp='1346523578' post='5571305'] I'm 50*, 56* as well. Zero issues. [/quote] [quote name='driverwedge' timestamp='1346523715' post='5571311'] I'm 50*, 56* as well. Zero issues. [/quote] [quote name='driverwedge' timestamp='1346523726' post='5571313'] I'm 50*, 56* as well. Zero issues. [/quote] Likes the setup so much you posted it 3 times.
  13. If you believe that a switch to Mizuno will help you get the ball in the hole better do it. You owe Titliest nothing.
  14. Why they ever stopped making these I will never know. I have found nothing better.
  15. [quote name='blink3665' timestamp='1346452001' post='5567929'] Thanks for all the extra input. I really just wanted to know how many of these things I needed to order at once The real problem with this is that I will need to get a shaft puller... Any benefit from the cheaper shafts will be gone with the cost of even a cheap puller I should have invested in one a long time ago. I already have a very expensive tomato stake! [b]Boy are my friends going to look at me funny when I roll up with a bag full of steel[/b]! [/quote] Yep, I got that look today, but when we were done and I was 10 strokes the better I was the only one smiling.
  16. [quote name='blindwillie' timestamp='1346430532' post='5566187'] [quote name='azgreg' timestamp='1346424902' post='5565603'] I will be taking a TM R580 with TT DG S300 for it's first trip out onto the course this afternoon. [/quote] Looking forward to hearing about the DG S300. I have one going in a 9* Cleveland Classic 290. Tipping it 1 1/4 inch and hoping to get SW to D2 [/quote] Loved it. I have had some practice, been playing the V-Steels with the same shafts for a little while and love the feel. Today tied my best round of the year, 78 (36 on the front). The course was short (6200 yards), but I've never been better tee to green than I was today.
  17. [quote name='blink3665' timestamp='1346448297' post='5567661'] So if this works so well in a driver and some great results in 3 woods.... what about hybrids? I don't play a 3 wood, I hop directly from driver to 15*, 19*, and 23* hybrids. What would the effect be on those if you kept the same length shaft? Would it be too heavy, or would you want to play a shorter shaft? [/quote] Everything I play (except) putter has TT DG S300 shafts in them. Love the feel (and the price). I am currently not playing any hybrids (love the V-Steels), but when I did I had the same shafts in them and loved them as well. I'm a big guy (6'4", 250lbs) and love the weight if the steels.
  18. I've got to many TM Rescue Mids and they need to find new homes. Left to right: 2FW TP, 14° loft, stock Fujikura Vista Pro 90 Tour Preferred s flex shaft, Golf Pride New Decade midsize grip, head cover. $50.00 shipped. 2H, 16° loft, stock Light Metal s flex shaft, Golf Pride New Decade midsize grip, head cover. $40.00 shipped. 3H, 19° loft, True Temper Dynamic Gold Tour Issue (flex unknown) shaft, Golf Pride New Decade midsize grip, no head cover. $40.00 shipped. 4H, 22° loft, stock Light Metal s flex shaft, Golf Pride New Decade midsize grip, head cover. $40.00 shipped. 4H, 22° loft, stock Ultralite Tip Soft s flex shaft, Winn grip, no head cover $35.00 shipped. 5H, 25° loft, stock Ultralite UG65 Tip Soft s flex shaft, Ping grip, no head cover $35.00 shipped.
  19. I will be taking a TM R580 with TT DG S300 for it's first trip out onto the course this afternoon.
  20. There are a lot of guys around here playing some great golf with Eye 2s.
  21. Titliest 983K, 8.5° loft, Graphite Design YS-7 x flex, new Golf Pride Tour Velvet midsize grip. $45.00 shipped to lower 48 states only.
  22. I just scored a set of these off of Ebay today. Hope to have a review in a week or 2.
×
×
  • Create New...