Jump to content

TravAz

Advanced Members
  • Content Count

    828
  • Joined

  • Last visited

Everything posted by TravAz

  1. Was fit into a ventus velecore blue 6 s over the winter. Swing speeds were in the 100 avg to 105 full out range. I am now living around 112 average on course and the shaft feels real loose and losing a fair share to the right. Club currently plays to 45.5, so I feel like I could easily take .5in maybe up to an inch off of it. Tip it ($50?) or start all over from scratch with a new fitting/driver (~700$)?
  2. In the TXG video posted above, Matt specifically says he would absolutely do a combo set with ZX5s in the long irons. I'll take his word over a bunch of WRX'ers any day. In fact, I did. When a combo set with my exact specs popped up on BST, I was all over them. 5-6 ZX5 and 7-PW ZX7, and couldn't be happier. I will probably need to do a trackman gapping session and have the loft's 100% dialed in, but I honestly don't even think about it from address - they blend so well I can just play golf.
  3. I can't find the original post now. Pretty sure @Howard_Jones posted it over in the WRX Club Techs section.
  4. I didnt bookmark it but it came from one of the well known members in the club builders forum here on wrx... i was probably searching for “projectx lz vs c-taper” or similar...
  5. Wondering what everyone thinks the value of a tech bay rental would be. And I'm talking about a nice setup like: = Trackman or GC Quad = Dual camera system with 240fps slow-mo - Force capture plate - Simulator play - Quality projector\screen - Comfortable environment - Food beer available How much would you pay per hour where you are? Is something like this available to you now, and if so, what are they charging?
  6. It looks like small differences that gradually widen throughout the bag, but never really more than a couple mph of ball speed, a degree in launch and a few hundred revs of spin. I think TXG had similar findings, but marks’s speeds are probably more relatable.
  7. My putting journey over the past 4 months or so: 1.) The video below changed everything for me. I did the test at around 2:45, and realized for the first time in my life that my eyes had to be *outside* the ball line for the alignment to make sense for me. 2.) Once that clicked, the fairly bent over stance allowed me to perform what feels to me like pretty straight back\through stroke. 3.) These required 2 equipment changes. I did a putter fitting and ended up with a 33.5 inch putter (I'm 6'2) that had the slightest amount of toe hang. I went with a ping that's adjustab
  8. 100%. I grabbed a used set off of global as a "test drive" since they have a good return policy. Hot: - Distance - I like the feel Not: - They are so low spin that when I turn one over I get bomb knuckleball flyers - Offset in the longer irons, which encourages the turned over knuckleball flyers I kinda doubt Matt was referring to the new Fowler blades since those are a limited run of 500 and are already out. I feel like Cobra has something else coming and the forged tec makes the most sense because they call that line their "flagship". Wish
  9. watch this at 16:30 re: amount of offset in the zx7 and the impact of bending:
  10. Matt from TXG hinted at “something else” coming from cobra in feb/mar. The crazy thing about MIM is those irons could be more than just “coated” or “finished”, right? I.e. like a blend not previously feasible...?
  11. I had literally the exact same experience. I was swinging a 7i 88mph on trackman with a Srixon rep fitting me. We worked into the PX LZ 6.5 and nothing could beat the numbers - they were perfect. Ironically the top pick for me from the Mizuno Optimizer was PX LZ 5.5, which I hated the feel of, and I am not sensitive to feel really at all (to dumb to know better, I just swing em). Anyway I was very confused until I stumbled onto this chart. The LZ 6.5 slots in right between a normal PX 5.5 and a C-Taper R+, so they really aren't that "stiff" just a 6.5 relative to the rest of the LZ line.
  12. Do we know the shaft options yet? Please say ventus!
  13. Pure vs dri-tac is like wife vs girlfriend I never wear a glove and love dri-tac - I think they are worth the 7$ personally. I tried pure’s once and couldn’t get them off fast enough.
  14. OMG look at these rare amazing unicorns! Now I’m going to game them so they will just be used like every other set out there!
  15. 1. Chandler, AZ 2. Arccos has me at 4.4 3. I would love to try the ZX7 3. Yes, i have a membership and hit balls and/or play around 5 days per week. 4. Cobra Forged Tec 2020 with C-Taper 120 in stiff. 5. The ZX-7s seem sweet! I’m excited to see how they feel (endo forged!), and also seeing if I can lower my ball flight a bit compared to the Forged Tec. I feel like I have wasted a bunch of time chasing distance and/or overly forgiving clubs. The ZX7 seems right in my wheelhouse as a good balance. 6. I can absolutely provide a thorough and un-biased review and
  16. Matt on TXG live today hinted at more cobra gear coming in feb-mar. All of the RAD stuff goes pre-order tomorrow, so it shouldn’t be that. Anyone got any dirt? An updated forged tec? New MB’s?
  17. Nope - keep that hand-me-down wood driver your grandpa gave you 30 years ago in the bag.
  18. Went back and looked at some stats. Played a 7k yard course in oct with my f8+. Longest drive that day was 246 total according to arccos. Played the same course last week with my speedzone (normal head, weight back, 9*) and had 5 drives over 280, longest 307. i’m somewhere in the 103-107mph range with driver. I will say I think alot of this was due to the shaft. Went from 76g hzrdus yellow to ventus blue 6s. SIM was probably 5yd longer on the monitor but got a deal I couldn’t pass up on the SZ.
  19. Matt from TXG on youtube has ball speeds pushing 180. Speedzone Extreme took 2nd place in their 2020 driver bracket. for so e reason I can’t get the link to post right, search on your own if interested. See if you can find a “pars and stripes” edition on sale - it comes with the real deal ventus blue. I play the regular speedzone with the weight back, and find it pretty forgiving all over the face. Way better off low strikes than my f8+ was.
  20. I think they are. 19 PM Grinds are 109 at global and on sale at other amounts at lots of retailers. On Callaway.com, there is a "find retailer" button, but no "order" button. Sure signs they are being phased out, but the real question is will there be a replacement, and if so, when will they announce it? One photo I saw of all the various company embargo dates did not show a new wedge from cally this year...
  21. Anyone know if Ping HQ in Phoenix is currently offering fittings or not due to covid etc? Any good alternatives in the valley for a wedge (only) fitting? I am brand agnostic, but the Glides\Jaws\Vokeys all look good. Want to get fit on grass to dial in turf interaction on < 50y shots.
  22. FWIW - I just moved in to cobra king forged tec, which is a hollow body, foam filled iron. 7i is 29.5*. I swing it around 85mph and produce around 117mph ball speed , launch at 17.8 with 4500rpm of spin and carry 174. Those numbers are off of a matt on GC2 using a wilson range ball. That was a solid 5mph more ball speed than my previous 7i which had .5 deg more loft. I'm carrying probaby 15-17y longer than before on average and best v best. Descent angle with the new clubs is 45* so no worry about holding greens. also:
×
×
  • Create New...