Jump to content

jtbutle

ClubWRX
  • Content Count

    371
  • Joined

  • Last visited

Everything posted by jtbutle

  1. First I have a Titleist TS2 18* 5 wood in near mint condition. It has been shafted with a Diamana ZF 70X shaft. The shaft has been tipped extra to play stiffer. The grip is a Golf Pride Align +4. The length is standard and head cover is included. There are some scratches right above the ferrule shown in the last pic. $old Second if a Diamana BF 70X shaft pull. It measures 39 7/8” and has been tipped 0.5”. The tip size is 0.335”. This shaft would be perfect in a 3 wood with the proper extensions. It has also been Pured. $140 OBO
  2. First l is a Tensei CK Blue 70X shaft. This shaft measures 43.25” and looks to be tipped 1/8” by measurements found on WRX. It was originally pulled from a Cobra adapter and for some reason filed down on the very tip. Almost like a blunted point. With a collard ferrule and shafting beads it will set fine. $60 Second is a Tensei AV 65 Stiff shaft pulled from a 5 wood. Seems o be standard tipping for a 5 wood and measures 40.5” with a generic Golf Pride 360 grip. $40 Please ask if you have questions.
  3. Anyone have the tip to “graphics” measurements for an untipped Diamana TB 70X?? Thanks!!
  4. First I have a Diamana ZF 70X shaft pull. It measures 40.5 and has been tipped 1.5”. It has a 0.335” tip. The shaft is in overall excellent condition. $175 OBO Second I have a Super Stroke Pistol GTR Tour pull. These grip was used for about 5 rounds. $old
  5. Seeing if anyone out there has a C Taper 120 Stiff wedge shaft to part with. Let me know please!!
  6. Yep, just remembered that. Brain fog some times.
  7. I have here 4 Dzn Pro V1x Left Dash balls. These balls are brand new free of logos. Looking for $200 shipped OBO.
  8. It will play 45” varying slightly depending on the club head. Thanks!
  9. First I have a mint Tensei Raw White 75 X Flex. It measures 43.25” and has a Golf Pride Tour Velvet grip. The adapter has been removed. $120 OBO Second is 3.75 Dzn Pro V1x balls of various model years. The first is 2 sleeves of 2013 version with a small logo. The second is 3 sleeves of 2015 version with a small logo. The last is 2.5 Dzn of the 2017 version with only 1 Dzn with a logo. $150 OBO
  10. I have here 4 Dzn 2021 Titleist Pro V1X golf balls. They are high numbers and do not have logos. Looking for $old
  11. I have here a Tensei AV 65 Stiff pull from a TS3 3 wood. This shaft is 0.335” tip and measures 41 1/8” (playing length about 42.5”) I’m pretty sure standard tipping. $50
  12. First I have a 7-PW set of Titleist 620 MB irons shafted with Project X 6.5 shafts and Golf Pride full cord grips. Standard LLL. There is some scaring below the ferrule which I would assume is from a bad bending job. It will not effect play at all. The swingweight is D3. $old Second is a Project X HZRDUS Smoke 6.0 90g hybrid shaft. The shaft was pulled from a Taylormade P790 2 iron. It is 0.370” tip and measures 38”. $old
  13. First off I have a Taylormade SIM 8.0* driver head only. This head has seen play and it shows in the pictures. I believe all weighting to be standard. Headcover and wrench are not included. Sold Second I have and excellent condition Diamana ZF 70 TX pull. It is 0.335” tip and measures 41”. It has been tipped 0.75”. $225 Now $185 shipped
  14. I have here a Proforce V2 6F4 pull out shaft from a SIM driver. It is 0.335” and measures 44”. It was standard in the SIM. Along with that is 4 Golf Pride V-55 Cord grips. These grips have a few round on them but remain in great shape. $50!!
  15. I have here a Titleist T100 6 iron head only. This club head is in very good condition and will take a 0.355” taper tip shaft. The “paintfill” from the writing had been removed. Also it looks like the top of the hosel has been “squared” off and a little scraping into the finish from a bending job done wrong. It was like that when I got it so I do not know for sure, but it will not effect reshafting. $75 OBO
  16. First I have 3 Dzn 2021 Pro V1X golf balls. They are brand new and no logos. $old Second is a Titleist 716 CB 2 iron. Somewhat hard to find but they are around. It is factory shafted with a Project X 6.5 shaft and 360 grip. Not sure of the loft and lie but length is standard. $old Next is my final lot of Super stroke grips. I’ve tried and ultimately failed the last time. One is a Traxion Pistol GTR Tour with just a few practice putts and the second is a Flatso 1.0 with 2 rounds. $old
  17. I have here a slide weight from the new Titleist TSi3 driver. It is the standard (8g) weight. $old
  18. First I have a Tensei Raw AV Blue 75X that was pulled from a new TSI3. This shaft is 0.335” tip and measures 44” tip to grip butt. I did not order it tipped so I am assuming it is untipped. $160 $135 OBO Second is 5 Dzn Titleist Pro V1X golf balls. Two dozen have logos but were ordered that way and three Dzn are logo overruns. All balls are brand new. $old
  19. First I have a 5-PW set of Titleist 718 MB iron heads only. These heads will take a 0.355" taper tip shaft. The loft and lie are standard. $275 OBO Second I have a Titleist 714 AP2 8 iron head only. This head will take a 0.355" taper tip shaft. I do not know the loft and lie. $60 OBO Third is for a 5-6, 8-PW set of Nippon Modus3 130 X-Stiff shafts. These shafts are 0.355” taper tip and have Golf Pride Full Cord grips (maybe past half life). They measure: 5 - 36 1/2” 6 - 3
  20. I have here a Titleist TS3 9.5* head only. This head has been used but remains in great shape. There are a few small nicks around the alignment aid but will not effect play. Headcover is included but no wrench. $old Second I have a 4-PW set of Dynamic Gold R300 shafts. These shafts are 0.355” taper tip and have Golf Pride Tour Velvet Midsized grips. They measure: 4 - 37 1/4” 5 - 36 3/4” 6 - 36 1/4” 7 - 35 3/4” 8 - 35 1/4” 9 - 34 5/8” PW - 34 1/4” $75 now 55
  21. First i have Titleist AP2 3 and 4 iron heads only. These heads will take 0.355" taper tip shafts. I do not know the loft and lie. $old Second i have a Project X Hzrdus Smoke Green 6.5 70g driver shaft. The raw length is 43 1/8”. I do not know if it has been tipped but i can check if anyone has the info. $60 OBO
  22. First I have a 3-PW set of Nike VR Pro Combo iron heads. These heads are in good shape for their age. They will take 0.355” taper tip shafts. The do currently have R300’s in them but The stepping is off in the 3 iron. I do not know the loft and lie unfortunately. $250 Second are 2 Adams hybrids. One is a 17* super hybrid shafted with a Matrix Ozik Program H7.1 Stiff. The other is a 18* super Idea 9031 with a Diamana white 80g stiff shaft. I believe them to be standard length. Take both for $50 Lastly I have a TS fairway headcover. $old
  23. First I have a Vokey SM7 58.08 wedge with a KBS Hi-Rev shaft and golf pride super tack grip. This wedge is standard loft, lie, and length. $45 OBO Second is 2 putter gyros. First is a Golf Pride SNSR grip. It is new. The second is a Super Stroke Pistol GT Tour grip. It has been used 3 rounds. $old Lastly is 5 Dzn Taylormade TP5x Practice balls. These are new but may show some cosmetic blemishes hence the “PRACTICE”. $old
  24. I have here a Tmade SIM Max OS approach wedge. This wedge has a KBS Max 85 Stiff shaft and factory grip. I believe all specs to be standard. Please ask if you have questions. $60 OBO
×
×
  • Create New...