Jump to content

Taylormade Mini?


Recommended Posts

So I just picked up one of the 12*. Spent about 2 hours in Golfsmith hitting this and a 12* SLDR 430. ( I'm sure people will kill me for using their monitors to see stats on the ball). First thing first, my miss is a pull hook when I try to make every swing a push draw. I started with the 430 first. Nice easy swings, but 30 yards left of my target line. So I'm wayyyyy off. Hit maybe 30 shots and shots were all well left of my target line. So now on to the mini....this is what I came for Golfsmith for. I don't currently have a driver in the bag because I just don't want to spend the cash and I use my buddies when we play every Sunday. So first shot with the mini....8 yards to left of my target line and 5 yards shorter than the avg drives with the 430. Ok, got lucky I'm thinking....well same goes for the next shot, and then the next shot same thing. I hit maybe 25 balls with the mini. Nothing more than 12 yards to the left of the target line. I will take that. Needless to say, I walked out with the mini and can't wait until Sunday morning to see what this does on the course!

Link to post
Share on other sites
  • Replies 80
  • Created
  • Last Reply

Top Posters In This Topic

[quote name='Crashhays' timestamp='1399077812' post='9221369']
So I just picked up one of the 12*. Spent about 2 hours in Golfsmith hitting this and a 12* SLDR 430. ( I'm sure people will kill me for using their monitors to see stats on the ball). First thing first, my miss is a pull hook when I try to make every swing a push draw. I started with the 430 first. Nice easy swings, but 30 yards left of my target line. So I'm wayyyyy off. Hit maybe 30 shots and shots were all well left of my target line. So now on to the mini....this is what I came for Golfsmith for. I don't currently have a driver in the bag because I just don't want to spend the cash and I use my buddies when we play every Sunday. So first shot with the mini....8 yards to left of my target line and 5 yards shorter than the avg drives with the 430. Ok, got lucky I'm thinking....well same goes for the next shot, and then the next shot same thing. I hit maybe 25 balls with the mini. Nothing more than 12 yards to the left of the target line. I will take that. Needless to say, I walked out with the mini and can't wait until Sunday morning to see what this does on the course!
[/quote]
I wouldn't trust store monitors to tell me accurate, absolute distance, but for what you did, they are perfect. It gave you a comparison between 2 clubs.

I wonder if the distance between the 2 is strictly due to club head speed, or it's tighter due to making better contact that offsets the club head speed. I know, at the end of the day, it's a moot point, as the end result is what matters... The analytical side of me just likes to know the "why"...
Do you remember what the monitors clocked your club speed at and your smash factor at?

Zolex 0 CC "The Hammer" driver
Warrior 3h
Divnick Adjustable Iron
Spin Doctor Wedges
Top Spin Putter
Molitor & Pinnacle balls

Link to post
Share on other sites

Tour Exotic 11.5 degree XCG 6 both tee and turf if you can find one cheap very expensive club but if you keep at it you can find one in expensive.

XR 9.0 Oban Kiyoshi Tour LTD 70 Stiff
Xhot 3 Deep 14.5 Project X 6.0
Xhot Pro Hybrid 16,18 Project X 6.5
Cobra Amp Forged KBS Tour +S 4-P
Ping Anser Circa 1972 (Mint)
CG10 58 Lob wedge, CG10 50 gap wedge

Link to post
Share on other sites

[quote name='Rebel420' timestamp='1399061291' post='9219937']
[quote name='Scratchtastic' timestamp='1399059021' post='9219693']
I hit a set of shots on Trackman this morning with one, 12 deg.

Was able to put it out consistently 275+ off the deck with pretty low launch/spin (around 9 deg launch/high 2000s spin) but had a pretty marked increase in spin/launch when I got it on a tee without any distance gains vs off the deck.

Liked the look/concept but will wait to get my hands on a 10 deg.
[/quote]
For comparison, how far do you hit your driver?
[/quote]

Off the tee around 285-300 (ss with driver is around 110-115).... Off the deck about 275. Current gamer is x hot pro 9.5/GD BB7x.

I'll be the first to say I would gladly trade some distance for fairways. Currently driver comes out of the bag a couple times a round and most of my tee shots are with 3 wood.

Link to post
Share on other sites

I hit it yesterday once after a customer got done demo'ing some clubs. It was taped up, so I thought, "what the heck?" I gave it a whack and hit a ball with a nice drawing ball-flight. Launch wasn't crazy high and it actually had a really nice flight to it on the monitor. It rolled out to about 250 yds. I thought to myself, "eh, I mean it felt nice and everything, but I hit my 2Deep farther." Then I looked into the specs and was actually surprised by what I saw. My spin rate was near 2,000 RPM of backspin, which is incredibly low for a 14* wood. Then I looked at my swing speed. 92 MPH. When I'm warmed up and swinging well I'm right around 99-102 MPH on average. Another 8 MPH would have given me a decent amount of distance gain with that club. Now I'm curious to see how this thing really performs while I'm warmed up and swinging at my normal swing speed. I'd also like to see how it performs with shot shaping because it seemed pretty easy to just step up and hit a draw (coming from a once chronic slicer of the golf ball).

Callaway XR16 Pro [color=#808080][size=2]UST VTS Silver TourSPX 7s[/size][/color]
Callaway GBB Epic 15 [color=#808080][size=2]UST VTS Silver TourSPX 8s[/size][/color]
Nike VR Forged Pro Combo 2 [color=#808080][size=2](True Temper Dynamic Gold S300)[/size][/color]
Maltby KE4 Tour HDI 3 [color=#808080][size=2](TBD)[/size][/color]
Maltby DBM Forged 5-9 [color=#808080][size=2](Nippon NS Pro Modus[sup]3[/sup] Tour 120s)[/size][/color]
Maltby DBM Forged P-G [color=#808080][size=2](Nippon NS Pro Modus[sup]3[/sup] Wedge 115)[/size][/color]
Callaway Mack Daddy Forged Slate 54.10 - 58.08 [color=#808080][size=2](Nippon NS Pro Modus[sup]3[/sup] Wedge 125)[/size][/color]
Edel E-3 Torque Balanced
[size=2][color=#808080]Winn Dri-Tac Midsize / Iomic Sticky 2.3 / SuperStroke 1.0 Flatso[/color][/size]
[url="http://www.golfwrx.com/forums/topic/993767-pinger89-witb-updated-55-w-new-toys/"]WITB Link[/url]

Link to post
Share on other sites

[quote name='Rebel420' timestamp='1399098417' post='9222849'][quote name='Crashhays' timestamp='1399077812' post='9221369']
So I just picked up one of the 12*. Spent about 2 hours in Golfsmith hitting this and a 12* SLDR 430. ( I'm sure people will kill me for using their monitors to see stats on the ball). First thing first, my miss is a pull hook when I try to make every swing a push draw. I started with the 430 first. Nice easy swings, but 30 yards left of my target line. So I'm wayyyyy off. Hit maybe 30 shots and shots were all well left of my target line. So now on to the mini....this is what I came for Golfsmith for. I don't currently have a driver in the bag because I just don't want to spend the cash and I use my buddies when we play every Sunday. So first shot with the mini....8 yards to left of my target line and 5 yards shorter than the avg drives with the 430. Ok, got lucky I'm thinking....well same goes for the next shot, and then the next shot same thing. I hit maybe 25 balls with the mini. Nothing more than 12 yards to the left of the target line. I will take that. Needless to say, I walked out with the mini and can't wait until Sunday morning to see what this does on the course!
[/quote]
I wouldn't trust store monitors to tell me accurate, absolute distance, but for what you did, they are perfect. It gave you a comparison between 2 clubs.

I wonder if the distance between the 2 is strictly due to club head speed, or it's tighter due to making better contact that offsets the club head speed. I know, at the end of the day, it's a moot point, as the end result is what matters... The analytical side of me just likes to know the "why"...
Do you remember what the monitors clocked your club speed at and your smash factor at?[/quote]
Sorry, but I do not. I actually meant to take a picture of everything but got caught up with it all and just left.

Link to post
Share on other sites

[quote name='SoCalTitleist' timestamp='1399042504' post='9217947']
[quote name='Rebel420' timestamp='1399041059' post='9217799']
Other than forgiveness of a 460cc driver, is there really any advantage?

And if they could get same forgiveness at max COR in a smaller size club, would there really be any advantage to the 400cc+ club? (You could argue the extra forgiveness/size allows longer shaft)

And as another question, how much club head speed increase does the extra 1.5" shaft length really give (and yds?)
[/quote]

I dont see much advantage if its only used as a driver.

Why not just cut down a driver to 3 wood length.
[/quote]


because half the attraction for most is the smaller heavier head.....if you cut a driver down to this length you end up with a huge light blob on the end of a short shaft...swing weight would be down in the D0 C7 range...which sucks!

 

Titleist tsi2 10* Mitsubishi TB 70x 

Titleist ts2 16.5 * Tensei CK pro Blue 80TX

Pxg Gen 2 0317X 3h  kbs 95 s+ 

Titleist T100 [email protected]*  modus 130x 

Vokey sm7 50*54*58*v grind s400

Cameron GSS 009  1.5 , sound slot , tungsten sole weights , head speed shaft. 

Link to post
Share on other sites

Head feels great and sets up very nicely. Hit my friends on a couple holes today it was the second time he had put it in play. He struggles with inconsistency with his R1 and he hit pretty nice medium draws with the mini most of the day except for a few bad swings. Definitely worth a look for some people.

Taylormade SIM 10.5* - Fujikura Ventus Black 6x
Titleist TS2 16.5* - Mitsubishi Diamana S+ 72x
Bridgestone J40 CB 4-PW - DG Tour Issue AMT X100
Bridgestone J15 50.08 - DG Tour Issue S400
Callaway MD4 54.10S - Nippon Modus 125 Wedge
Cleveland RTX4 Raw 58.03 - DG Tour Issue S400
Taylormade Spider X
Bridgestone Tour B XS

Link to post
Share on other sites

Picked up a 12 yesterday to see if it would fit between my driver and 4 wood off of the tee. Reshafted it last night with a Motore Speeder VC 8.2 X tipped 1 inch and set up at 43". Ran up to GS today just to see some numbers on the LM and after about the 40th ball it made a storage sound. I looked at the face and the face cracked right above the sweet spot :( . Looks like I'll have to see if they will replace it. It is a sweet feeling, sounding, very consistant club FWIW and does fit nice between my 4W and driver with an average total distance of 282. I can't wait to get a replacement.

Ping G30 9* Tour 80 X 44.75" hot melted to D3 set: -.6
Taylormade SLDR TP 3W Motore Speeder 8.3 X set: 15*
Titleist 915H 18* Diamana D+ 90 X set: A1
Ping i20 20* Hybrid TFC-707H X
Titleist MB 714 4-PW Project X 6.5
Mizuno MP-T5 55* PX 6.5 & Titleist Vokey SM6 62* PX 6.0
2015 Scotty Cameron Select Newport 2 35"

Link to post
Share on other sites

I have a similar setup driver wise to you...can you tell me how much longer your 430 is than the mini? Im trying to find a mini in person I can hit...Found one tonight at Dicks, but of course as luck would have it , it had an R flex shaft..so didn't even bother....IM curious what your thoughts are on the mini vs 430? sounds like your playing the mini as I hope to..a strong 3 wood (2 wood) .....

 

Titleist tsi2 10* Mitsubishi TB 70x 

Titleist ts2 16.5 * Tensei CK pro Blue 80TX

Pxg Gen 2 0317X 3h  kbs 95 s+ 

Titleist T100 [email protected]*  modus 130x 

Vokey sm7 50*54*58*v grind s400

Cameron GSS 009  1.5 , sound slot , tungsten sole weights , head speed shaft. 

Link to post
Share on other sites

Was checking them out in the shop today. Look nice and feel good.

They are freekin' huge for a 3W but nice for a short driver. Could see it as a driver replacement NP.

But, IMHO, it's going to take some real skill to hit them off the deck. I don't think the average golfer will be able to use anything but the 16 from the fairway. And even the 16 will be a stretch for most.

Still think they are neat to have out there. New options are always a good thing. :)

Link to post
Share on other sites

I love SLDR woods...
Here is my conclusion..
430 is the longest driver for me.
I have a 14 degree mini , straight as an arrow but not long. My 15 degree SLDR 3 wood ,appears to have a hotter face, goes further than mini at least by10 yards..
Mini has the least roll out of all the other woods. I found it manageable from the fairway. All clubs have stock speeder with stiff flex...

Link to post
Share on other sites

[quote name='Killer Goat' timestamp='1399162230' post='9226333']
Picked up a 12 yesterday to see if it would fit between my driver and 4 wood off of the tee. Reshafted it last night with a Motore Speeder VC 8.2 X tipped 1 inch and set up at 43". Ran up to GS today just to see some numbers on the LM and after about the 40th ball it made a storage sound. I looked at the face and the face cracked right above the sweet spot :( . Looks like I'll have to see if they will replace it. It is a sweet feeling, sounding, very consistant club FWIW and does fit nice between my 4W and driver with an average total distance of 282. I can't wait to get a replacement.
[/quote]

Killer Goat,
What is the tip size? Bought a 12 degree yesterday and took it straight to the course, and I'm not sure I like the stock shaft. Thinking about reshafting it. Thanks.

Link to post
Share on other sites

[quote name='Ezgolfer' timestamp='1399174292' post='9227495']
I love SLDR woods...
Here is my conclusion..
430 is the longest driver for me.
I have a 14 degree mini , straight as an arrow but not long. My 15 degree SLDR 3 wood ,appears to have a hotter face, goes further than mini at least by10 yards..
Mini has the least roll out of all the other woods. I found it manageable from the fairway. All clubs have stock speeder with stiff flex...
[/quote]


I think the shaft set up will determine how they play based on launch and spin, as I felt the same way as your comments after a demo at TheKingdom.

I ordered mine with a lower launch shaft and spin to combat this and so far it has helped some. I do not have enough swings with my 12 degree to really confirm that mine is producing bullets, mid high, or a straight floater. I hit two out of the rough (winter rules) and they were low hooking bullets and one from the FW that spun a touch to much.

Not 100% sure on tip size. I do have a .335 tip shaft in it, but the hosel could be either .335 or .350 still. One will need a shim and one will not for a .335 shaft.
Guessing that they are .335 for the TP and .350 for non TP as past glued heads have been.

Link to post
Share on other sites

hmm..i thought they all claimed to begin with that the regular and TP were same heads....just different shafts? (not size) now the 10 degree may be different but whos seen one of those unicorns (id love one) ?

 

Titleist tsi2 10* Mitsubishi TB 70x 

Titleist ts2 16.5 * Tensei CK pro Blue 80TX

Pxg Gen 2 0317X 3h  kbs 95 s+ 

Titleist T100 [email protected]*  modus 130x 

Vokey sm7 50*54*58*v grind s400

Cameron GSS 009  1.5 , sound slot , tungsten sole weights , head speed shaft. 

Link to post
Share on other sites

[quote name='Ezgolfer' timestamp='1399174292' post='9227495']
I love SLDR woods...
Here is my conclusion..
430 is the longest driver for me.
I have a 14 degree mini , straight as an arrow but not long. My 15 degree SLDR 3 wood ,appears to have a hotter face, goes further than mini at least by10 yards..
Mini has the least roll out of all the other woods. I found it manageable from the fairway. All clubs have stock speeder with stiff flex...
[/quote]
For me, my 16.5* stg2 3HL (that I have turned down to 16*) was landing at the same spot when hit off the deck as the 14* mini driver off the tee, but the 3w was rolling out a good 10+ yds, where the mini driver landed soft and stopped. I'm sure a combo of my swing and trying a stiffer shaft may get me different results (I really think I was hitting down on this like a hybrid off the tee, when I needed to sweep up on it like a driver)

Definitely want to spend more time and play with different options on these (shaft/loft). Thing was the easiest club I ever hit off of a tee, and was as accurate as any club over 200yds has been for me. If I can get within 10yds of my driver distance with one of these, it will be my driver.

Zolex 0 CC "The Hammer" driver
Warrior 3h
Divnick Adjustable Iron
Spin Doctor Wedges
Top Spin Putter
Molitor & Pinnacle balls

Link to post
Share on other sites

[quote name='bladehunter' timestamp='1399213794' post='9228951']
hmm..i thought they all claimed to begin with that the regular and TP were same heads....just different shafts? (not size) now the 10 degree may be different but whos seen one of those unicorns (id love one) ?
[/quote]

Again, unsure.....but I have to ask, what if all the heads were only .350? Does this make or break the deal?

Or do you just think that a .335 head and a .350 would be different from each other then hosel size?

Oh, rained out today.....no more info on playability

Link to post
Share on other sites

[quote name='TMBob' timestamp='1399041328' post='9217823']
I will be trying this out on the course this weekend.....mainly off the tee first.[attachment=2205023:image.jpg]
[/quote]

What shaft is that?

TM SLDR white 10.5 Matrix Black Tie
TM RBZ Tour 5 Wood
TM RBZ Tour 3 Hybrid
TM R11 True Temper
Odyssey Milled Collection #9 33.5"
Cleveland CG15 50/55/60

Link to post
Share on other sites

Went to Dicks and hit the 14°. The club head size reminded me a lot of the RBZ 3 wood. The mini was money off the tee. Took a little getting used to off the deck and about 10 yards shorter compared to the tee shot . Had about 15 ft of dispersion with 40-50 shots. I'm not a long hitter by any means and I was able to hit it off the tee about 250-255 yards. That's about 20 yards off of my driver and 5 wood both JetSpeed, so a good gap yardage for me. Tight fairways are calling this club. I purchased it and can't wait to game it.

Link to post
Share on other sites

[quote name='msturkie' timestamp='1399204209' post='9228415']
[quote name='Killer Goat' timestamp='1399162230' post='9226333']
Picked up a 12 yesterday to see if it would fit between my driver and 4 wood off of the tee. Reshafted it last night with a Motore Speeder VC 8.2 X tipped 1 inch and set up at 43". Ran up to GS today just to see some numbers on the LM and after about the 40th ball it made a storage sound. I looked at the face and the face cracked right above the sweet spot :( . Looks like I'll have to see if they will replace it. It is a sweet feeling, sounding, very consistant club FWIW and does fit nice between my 4W and driver with an average total distance of 282. I can't wait to get a replacement.
[/quote]

Killer Goat,
What is the tip size? Bought a 12 degree yesterday and took it straight to the course, and I'm not sure I like the stock shaft. Thinking about reshafting it. Thanks.
[/quote]

It is a .335. And if anybody was curious to mine cracking, Goldsmith replaced it with one from the store inventory :)

Ping G30 9* Tour 80 X 44.75" hot melted to D3 set: -.6
Taylormade SLDR TP 3W Motore Speeder 8.3 X set: 15*
Titleist 915H 18* Diamana D+ 90 X set: A1
Ping i20 20* Hybrid TFC-707H X
Titleist MB 714 4-PW Project X 6.5
Mizuno MP-T5 55* PX 6.5 & Titleist Vokey SM6 62* PX 6.0
2015 Scotty Cameron Select Newport 2 35"

Link to post
Share on other sites

[quote name='Killer Goat' timestamp='1399245298' post='9231285']
[quote name='msturkie' timestamp='1399204209' post='9228415']
[quote name='Killer Goat' timestamp='1399162230' post='9226333']
Picked up a 12 yesterday to see if it would fit between my driver and 4 wood off of the tee. Reshafted it last night with a Motore Speeder VC 8.2 X tipped 1 inch and set up at 43". Ran up to GS today just to see some numbers on the LM and after about the 40th ball it made a storage sound. I looked at the face and the face cracked right above the sweet spot :( . Looks like I'll have to see if they will replace it. It is a sweet feeling, sounding, very consistant club FWIW and does fit nice between my 4W and driver with an average total distance of 282. I can't wait to get a replacement.
[/quote]

Killer Goat,
What is the tip size? Bought a 12 degree yesterday and took it straight to the course, and I'm not sure I like the stock shaft. Thinking about reshafting it. Thanks.
[/quote]

It is a .335. And if anybody was curious to mine cracking, Goldsmith replaced it with one from the store inventory :)
[/quote]

Glad to hear Golfsmith helped you make it right. Also says something about TaylorMade policies that allows a retailer like GS to do so. There are many high end items these days that the store can't help you other than shop to the OEM for you. Even more impressive that they honored it after you did a DIY reshaft on the club


I hope you got your high end shaft out before you returned it

Zolex 0 CC "The Hammer" driver
Warrior 3h
Divnick Adjustable Iron
Spin Doctor Wedges
Top Spin Putter
Molitor & Pinnacle balls

Link to post
Share on other sites

[quote name='Killer Goat' timestamp='1399245298' post='9231285']
[quote name='msturkie' timestamp='1399204209' post='9228415']
[quote name='Killer Goat' timestamp='1399162230' post='9226333']
Picked up a 12 yesterday to see if it would fit between my driver and 4 wood off of the tee. Reshafted it last night with a Motore Speeder VC 8.2 X tipped 1 inch and set up at 43". Ran up to GS today just to see some numbers on the LM and after about the 40th ball it made a storage sound. I looked at the face and the face cracked right above the sweet spot :( . Looks like I'll have to see if they will replace it. It is a sweet feeling, sounding, very consistant club FWIW and does fit nice between my 4W and driver with an average total distance of 282. I can't wait to get a replacement.
[/quote]

Killer Goat,
What is the tip size? Bought a 12 degree yesterday and took it straight to the course, and I'm not sure I like the stock shaft. Thinking about reshafting it. Thanks.
[/quote]

It is a .335. And if anybody was curious to mine cracking, Goldsmith replaced it with one from the store inventory :)
[/quote]

Thanks! Glad they were able to replace it quickly for you.

Link to post
Share on other sites

I demo'd the 12 and 14* Minis with the stock shafts in R flex... i thought they SUCKED. They felt harsh and flimsy to me, and i could not keep them from going left. Distance was about what i get with my 22* Jetspeed hybrid. Hit about 20 balls with them and stopped. the entire SLDR wood/hybrid line just does not do it for me, and the salesperson at GolfGalaxy agreed... and yes i have a lot of TM products in my bag, and am very interested in the SLDR irons, but no thanks to the woods.

Ping G410 Plus 10.5

Ping G410 5 Wood 17.5*
Ping G410 Hybrid 21*
Cobra King Utility 4i
Srixon ZX5 5i - AW

Titleist Vokey SM8 56* 60*
EVNROLL ER1.2 TourBlade

Vessel Lite Lux

Link to post
Share on other sites

[quote name='Rebel420' timestamp='1399264007' post='9233275']
[quote name='Killer Goat' timestamp='1399245298' post='9231285']
[quote name='msturkie' timestamp='1399204209' post='9228415']
[quote name='Killer Goat' timestamp='1399162230' post='9226333']
Picked up a 12 yesterday to see if it would fit between my driver and 4 wood off of the tee. Reshafted it last night with a Motore Speeder VC 8.2 X tipped 1 inch and set up at 43". Ran up to GS today just to see some numbers on the LM and after about the 40th ball it made a storage sound. I looked at the face and the face cracked right above the sweet spot :( . Looks like I'll have to see if they will replace it. It is a sweet feeling, sounding, very consistant club FWIW and does fit nice between my 4W and driver with an average total distance of 282. I can't wait to get a replacement.
[/quote]

Killer Goat,
What is the tip size? Bought a 12 degree yesterday and took it straight to the course, and I'm not sure I like the stock shaft. Thinking about reshafting it. Thanks.
[/quote]

It is a .335. And if anybody was curious to mine cracking, Goldsmith replaced it with one from the store inventory :)
[/quote]

Glad to hear Golfsmith helped you make it right. Also says something about TaylorMade policies that allows a retailer like GS to do so. There are many high end items these days that the store can't help you other than shop to the OEM for you. Even more impressive that they honored it after you did a DIY reshaft on the club


I hope you got your high end shaft out before you returned it
[/quote]

Most definitely! It currently resides in the new head. Hopefully this one makes the grade.

Ping G30 9* Tour 80 X 44.75" hot melted to D3 set: -.6
Taylormade SLDR TP 3W Motore Speeder 8.3 X set: 15*
Titleist 915H 18* Diamana D+ 90 X set: A1
Ping i20 20* Hybrid TFC-707H X
Titleist MB 714 4-PW Project X 6.5
Mizuno MP-T5 55* PX 6.5 & Titleist Vokey SM6 62* PX 6.0
2015 Scotty Cameron Select Newport 2 35"

Link to post
Share on other sites

[quote name='TMBob' timestamp='1399041328' post='9217823']
I will be trying this out on the course this weekend.....mainly off the tee first.[attachment=2205023:image.jpg]
[/quote]

That should be a nice combo.

Crazy 450 Crazy LY01 6.9
3 Deep Proforce V2 75s
Buchi 05 DI Nippon 950HT 39.5"
Yonex Ezone Mb Nippon Super Peening Blue
Yururi Gekko 53,61:Romaro Ray SX 58
SeeMore mFGPcs 370g 32"

Link to post
Share on other sites

I've hit my 14* w/ Elements Fire 8F5 the last couple days and so far so good! Love the controllability of it off the tee, I now feel like I have so many more options off the tee and couldn't be happier with the results thus far!

Nike Vapor Fly Pro 9.5* / Kuro Kage XT 60 TX
Nike Vapor Fly 3HL 16* / Fuji Rombax P95 X
Nike Vapor Fly Hybrid 20* / UST iRod 110F4
Nike Vapor Pro 4-PW / KBS Tour S
Nike Engage 51SQ 55SQ 60TS / KBS Tour Wedge
Nike Method RORS 006 Prototype 34"

Link to post
Share on other sites

Bought this because I've been inconsistent with my driver recently, but my woods are money. Didn't get a chance to hit it on the range before I took it out on my weekend trip. Didn't even take my driver's headcover off. Off the tee it was a thing of beauty (12*) and I probably only lost 10 yards of distance. Its gotta be tough hitting off the turf though, didn't even attempt it. I'm gonna give my driver another week or 2 before you guys see it on the BST section.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Our picks

    • 2021 WGC Workday Championship @ The Concession Photos- Links & Discussion (UpDaTeD)
      Please post any questions or comments here.
       
      Links...
       
      2021 WGC Workday Championship - Tuesday #1
      2021 WGC Workday Championship - Tuesday #2
      2021 WGC Workday Championship - Tuesday #3
      2021 WGC Workday Championship - Tuesday #4
      2021 WGC Workday Championship - Tuesday #5
      2021 WGC Workday Championship - Tuesday #6
      Cameron Smith's Cameron 11.5 putter - 2021 WGC Workday Championship
      Cameron putter 2021 WGC Workday Championship
      2021 Ping putters - 2021 WGC Workday Championship
      Rory wearing new Nike Tour Victory II shoes - 2021 WGC Workday Championship
      Odyssey putters - 2021 WGC Workday Championship
       
      • 65 replies
    • 2021 AT&T Pebble Beach - discussion
      2021 AT&T Pebble Beach - Tuesday #1
      2021 AT&T Pebble Beach - Tuesday #2
       
      2021 AT&T Pebble Beach - Tuesday #3
       
      2021 AT&T Pebble Beach - Tuesday #4
       
      2021 AT&T Pebble Beach - Tuesday #5
       
      2021 AT&T Pebble Beach - Tuesday #6
       
      2021 AT&T Pebble Beach - Tuesday #7
       
      2021 AT&T Pebble Beach - Tuesday #8
       
      2021 AT&T Pebble Beach - Tuesday #9

      Ryan Moore with Axis 1 putter @ 2021 AT&T PB
       
       
       
      Please post any questions and comments here
      • 59 replies
    • 2021 Waste Management Phoenix Open - Discussion
      General galleries
      2021 Waste Management Phoenix Open - Tuesday #1
      2021 Waste Management Phoenix Open - Tuesday #2
      2021 Waste Management Phoenix Open - Tuesday #3
      2021 Waste Management Phoenix Open - Tuesday #4
      Monday Qualifier for Waste Management Open 
      Special galleries
       
      Ping PLD putters - 2021 WMPO Scott Brown with MMT graphite shafts in his ProTo Concept irons - 2021 WMPO TaylorMade putter cover from 2021 Waste Management Phoenix Open New Srixon golf balls - 2021 WMPO Bettinardi putters & cover - 2021 Waste Management Phoenix Open Cameron putters -2021 Waste Management Phoenix Open Piretti putters -2021 Waste Management Phoenix Open Cameron mallets - 2021 WMPO Odyssey 2-ball Ten - 2021 WMPO  
      Please put any questions or comments here
       
      Jason Day's Bag...
        • Like
      • 21 replies
    • 2021 FARMERS WITB & Equipment Photos- Links and comments
      We are back on the ground at the 2021 Farmers PGA Tour event. Please add you comments in this thread. Here are links to all the galleries:
       
      Special galleries:
      2021 Farmers - Tuesday #1
      2021 Farmers - Tuesday #2
      2021 Farmers - Tuesday #3
      2021 Farmers - Tuesday #4
      2021 Farmers - Tuesday #5
       
      2021 Farmers - Tuesday #6
       
      2021 Farmers - Tuesday #7
       
      Cameron putters - Farmers 2021
       
      Odyssey 2-ball Ten - Farmers 2021
       
      Project X Even Flow RipTide MX & LX proto shafts - Framers 2021
       
      TaylorMade putter cover for Torrey Pines - Farmers 2021
       
      Sling Shot training aid - Farmers 2021
       
       
      • 47 replies
    • 2021 American Express WITB & Equipment Photos- Links and comments
      We are back on the ground at the American Express PGA event.
       
      Here are links to all the galleries:
       
      Cameron putters - 2021 American Express
      PXG Gen 4 prototype drivers - new putters
      UST Maymiya LinQ shafts - American Express 2021
      Mitsubishi Kaili & MMT shafts - American Express 2021
      Titleist TSi 2 & TSi 3 hybrids - American Express 2021
      TaylorMade putter cover for Palm Springs/Palm Desert - American Express
      New Aldila Synergy, Ascent & prototype shafts - American Express 2021
      Callaway Apex Pro iron, Epic Driver and fairway, Apex iron & hybrid - American Express 2021
      New Perfect Practice training aids - American Express 2021
      New KBS prototype shafts - American Express 2021
       
        • Like
      • 18 replies

×
×
  • Create New...