Jump to content

Recommended Posts

  • Replies 64
  • Created
  • Last Reply

Top Posters In This Topic

Just got the official email from Oban on pricing. They will be $75 each.

 

 

That's... a lot.

 

I love the oban kiyoshi white and purple, but I can't imagine spending $75 on a single steel shaft. I can get a full set of used KBS Tour shafts for that kind of money.

 

Maybe the actual price will be less? Maybe they will work with companies to make it a cheaper option when you buy new?

Yes, I hope some companies will offer them as custom options. I could accept to pay 25-30€ extra per club, but not more. Anyhow, Mizuno will not include them in their options, and I am a Mizuno fan boy...

Link to post
Share on other sites

Just got my demos in. The labeling for these is stickers, not the heat transfer like Nippon. Did a quick profile on these and they are kind of close to a DG Pro with a softer mid/tip section. I will build these up today and hit them tomorrow and post again.

 

Thank you!

 

Can't wait to hear more.

Taylormade Sim Max 10.5 - Fuji Ventus Black 6X
Taylormade Sim Ti - Diamana ZF 80 TX
Titleist 818 H2 19 - Fuji Speeder TS 9.8 X

PXG 0311X 4 - HZRDUS Red 105 X
PXG 0311T Gen 3 - 5 to PW - PX 6.5
Vokey SM6 Raw - 50F

Vokey SM7 Raw - 56S

Vokey Low Bounce K Raw - 60

Scotty Cameron X5R Flow Neck Torched Finish

Link to post
Share on other sites
  • 1 month later...

Well, that took a lot longer than I thought it would. My apologies for not posting a review of these shafts until now. Busy busy!

 

The feel of these are very similar to the Nippon Modus 3 Tour 130's, just lighter. I usually like a very stiff tip/soft butt shaft, so these were very hard for me to hit. I have a quick tempo with a hard release. Players with a smoother tempo and release will probably like these a lot, but for the price$$$ ???

 

Also, I don't like the shaft band sticker. because of all the steps in the shaft, half of the sticker ended up under the grip because it was the only flat place to put it. These are being made by Shimada in Japan. They were nice and round on the table roll test too. Sorry I don't have more info to post.

Link to post
Share on other sites

I just tried these today and they felt fantastic. Tried it with the MP5 head. I'm a C-Taper guy, so not sure how they compare from a technical standpoint? Shaft expert thoughts? Though they were extremely smooth and I was crushing them on the trackman.

 

Also tried the PX LZ shaft with the MP5 and was surprised that I didn't like it at all.

 

Any new thoughts on these Obans? I understand they are "constant weight." Curious As to how this impacts club builds?

Titleist TSi2 10, Fujikura Ventus Blue Velocore 6X, 45"

Titleist TSi2 16.5, Fujikura Ventus Red Velocore 7X, 43"

TaylorMade GAPR Mid 4, KBS

Titleist T100S, KBS C-Taper S+ 5-PW

Titleist SM8, 50F, 54S, 60D, TT S400 Custom 

Scotty Cameron Phantom X12, 35", Stability Tour


[url="https://www.instagram.com/dnice262626/"]https://www.instagram.com/dnice262626/[/url]

Link to post
Share on other sites

Anyone try these yet? Curious to read others opinions.

Titleist TSi2 10, Fujikura Ventus Blue Velocore 6X, 45"

Titleist TSi2 16.5, Fujikura Ventus Red Velocore 7X, 43"

TaylorMade GAPR Mid 4, KBS

Titleist T100S, KBS C-Taper S+ 5-PW

Titleist SM8, 50F, 54S, 60D, TT S400 Custom 

Scotty Cameron Phantom X12, 35", Stability Tour


[url="https://www.instagram.com/dnice262626/"]https://www.instagram.com/dnice262626/[/url]

Link to post
Share on other sites

Update?

Callaway Mavrik 10.5* with Tensei Pro White 60 stiff tipped 1/2"
Titleist TS4 10.5* with GD XC6 stiff tipped 1/2" 
Titleist TS2 16.5* with Tensei Pro White 70 stiff tipped 1"
Titleist TS2 hybrid 19* with Tensei Pro White 90 stiff tipped 1/2"
Titleist 680 MB 4-9 with Shimada Tour X-Stiff SS 1X
Vokey SM7 46,50,55,60 with Shimada Tour X-Stiff 
Yes C Groove Callie tour issue Badds prototype long neck
Callaway Chrome Soft X Triple Track
Golf Pride Multicompound Black/Black +1/64"
Ogio Silencer bag

Link to post
Share on other sites
Update?

Possibly ordering a set, but what bothers me is that I found out they are flighted shafts. I tried the DG Pros which are flighted and I didn't like them...so I'm hesitant to buy them now. I did demo a 6 iron though at and out door range and really liked it. Very consistent ball flight.

Titleist TSi2 10, Fujikura Ventus Blue Velocore 6X, 45"

Titleist TSi2 16.5, Fujikura Ventus Red Velocore 7X, 43"

TaylorMade GAPR Mid 4, KBS

Titleist T100S, KBS C-Taper S+ 5-PW

Titleist SM8, 50F, 54S, 60D, TT S400 Custom 

Scotty Cameron Phantom X12, 35", Stability Tour


[url="https://www.instagram.com/dnice262626/"]https://www.instagram.com/dnice262626/[/url]

Link to post
Share on other sites

Ordered a set of S+ Obans. Will chime in with thoughts after my first round with them.

Titleist TSi2 10, Fujikura Ventus Blue Velocore 6X, 45"

Titleist TSi2 16.5, Fujikura Ventus Red Velocore 7X, 43"

TaylorMade GAPR Mid 4, KBS

Titleist T100S, KBS C-Taper S+ 5-PW

Titleist SM8, 50F, 54S, 60D, TT S400 Custom 

Scotty Cameron Phantom X12, 35", Stability Tour


[url="https://www.instagram.com/dnice262626/"]https://www.instagram.com/dnice262626/[/url]

Link to post
Share on other sites

Anyone know the profile of these? Butt,mid and tip stiffness?

Callaway Mavrik 10.5* with Tensei Pro White 60 stiff tipped 1/2"
Titleist TS4 10.5* with GD XC6 stiff tipped 1/2" 
Titleist TS2 16.5* with Tensei Pro White 70 stiff tipped 1"
Titleist TS2 hybrid 19* with Tensei Pro White 90 stiff tipped 1/2"
Titleist 680 MB 4-9 with Shimada Tour X-Stiff SS 1X
Vokey SM7 46,50,55,60 with Shimada Tour X-Stiff 
Yes C Groove Callie tour issue Badds prototype long neck
Callaway Chrome Soft X Triple Track
Golf Pride Multicompound Black/Black +1/64"
Ogio Silencer bag

Link to post
Share on other sites

Ordered a set of S+ Obans. Will chime in with thoughts after my first round with them.

 

How did they compare to the project X lz? How do they compare to the c taper? I assume you use original c taper and not the c taper lite?

 

I'd be surprised if they are similar to the c taper. If it goes you the c taper is a great shaft, but it doesn't fit a lot of people like the stock shafts you often see like the DG s300 or kbs tour.

Taylormade Sim Max 10.5 - Fuji Ventus Black 6X
Taylormade Sim Ti - Diamana ZF 80 TX
Titleist 818 H2 19 - Fuji Speeder TS 9.8 X

PXG 0311X 4 - HZRDUS Red 105 X
PXG 0311T Gen 3 - 5 to PW - PX 6.5
Vokey SM6 Raw - 50F

Vokey SM7 Raw - 56S

Vokey Low Bounce K Raw - 60

Scotty Cameron X5R Flow Neck Torched Finish

Link to post
Share on other sites

Ordered a set of S+ Obans. Will chime in with thoughts after my first round with them.

 

How did they compare to the project X lz? How do they compare to the c taper? I assume you use original c taper and not the c taper lite?

 

I'd be surprised if they are similar to the c taper. If it goes you the c taper is a great shaft, but it doesn't fit a lot of people like the stock shafts you often see like the DG s300 or kbs tour.

Don't have the Obans yet, just ordered them..maybe a week or so before they are built. Yes, I've been playing the regular CTaper since they came out. I only hit the PX LZ for about 10 balls and didnt seem to get along with it.

Titleist TSi2 10, Fujikura Ventus Blue Velocore 6X, 45"

Titleist TSi2 16.5, Fujikura Ventus Red Velocore 7X, 43"

TaylorMade GAPR Mid 4, KBS

Titleist T100S, KBS C-Taper S+ 5-PW

Titleist SM8, 50F, 54S, 60D, TT S400 Custom 

Scotty Cameron Phantom X12, 35", Stability Tour


[url="https://www.instagram.com/dnice262626/"]https://www.instagram.com/dnice262626/[/url]

Link to post
Share on other sites

Getting the Obans today!

Titleist TSi2 10, Fujikura Ventus Blue Velocore 6X, 45"

Titleist TSi2 16.5, Fujikura Ventus Red Velocore 7X, 43"

TaylorMade GAPR Mid 4, KBS

Titleist T100S, KBS C-Taper S+ 5-PW

Titleist SM8, 50F, 54S, 60D, TT S400 Custom 

Scotty Cameron Phantom X12, 35", Stability Tour


[url="https://www.instagram.com/dnice262626/"]https://www.instagram.com/dnice262626/[/url]

Link to post
Share on other sites

 

 

Titleist TSi2 10, Fujikura Ventus Blue Velocore 6X, 45"

Titleist TSi2 16.5, Fujikura Ventus Red Velocore 7X, 43"

TaylorMade GAPR Mid 4, KBS

Titleist T100S, KBS C-Taper S+ 5-PW

Titleist SM8, 50F, 54S, 60D, TT S400 Custom 

Scotty Cameron Phantom X12, 35", Stability Tour


[url="https://www.instagram.com/dnice262626/"]https://www.instagram.com/dnice262626/[/url]

Link to post
Share on other sites

Wow, didn't realize the pics come out so small from my phone.... here they are again....

 

Hit a few balls with them yesterday....and brought the 8-PW with me in my semi-final CC match. Hit a beauty 8 iron to about 9 feet on the 3rd hole.

 

With very little time on them thus far, the two words that stand out to me are: Easy and Consistent. The ball flight is definitely higher than my Ctapers produce, but they seem to hold their lines extremely well. Overall, they feel a fair amount lighter in total weight compared to my Ctaper setups, which I'm not sure what that will mean in terms of total performance. I may take them into my CC final next weekend, but I'm not sure yet.....

 

 

 

Titleist TSi2 10, Fujikura Ventus Blue Velocore 6X, 45"

Titleist TSi2 16.5, Fujikura Ventus Red Velocore 7X, 43"

TaylorMade GAPR Mid 4, KBS

Titleist T100S, KBS C-Taper S+ 5-PW

Titleist SM8, 50F, 54S, 60D, TT S400 Custom 

Scotty Cameron Phantom X12, 35", Stability Tour


[url="https://www.instagram.com/dnice262626/"]https://www.instagram.com/dnice262626/[/url]

Link to post
Share on other sites

Wow, didn't realize the pics come out so small from my phone.... here they are again....

 

Hit a few balls with them yesterday....and brought the 8-PW with me in my semi-final CC match. Hit a beauty 8 iron to about 9 feet on the 3rd hole.

 

With very little time on them thus far, the two words that stand out to me are: Easy and Consistent. The ball flight is definitely higher than my Ctapers produce, but they seem to hold their lines extremely well. Overall, they feel a fair amount lighter in total weight compared to my Ctaper setups, which I'm not sure what that will mean in terms of total performance. I may take them into my CC final next weekend, but I'm not sure yet.....

 

 

 

 

Curious what your swing speed is with the 6 iron or driver, what flex did you go with? Does the tip seem stable? Thanks!

Callaway Mavrik 10.5* with Tensei Pro White 60 stiff tipped 1/2"
Titleist TS4 10.5* with GD XC6 stiff tipped 1/2" 
Titleist TS2 16.5* with Tensei Pro White 70 stiff tipped 1"
Titleist TS2 hybrid 19* with Tensei Pro White 90 stiff tipped 1/2"
Titleist 680 MB 4-9 with Shimada Tour X-Stiff SS 1X
Vokey SM7 46,50,55,60 with Shimada Tour X-Stiff 
Yes C Groove Callie tour issue Badds prototype long neck
Callaway Chrome Soft X Triple Track
Golf Pride Multicompound Black/Black +1/64"
Ogio Silencer bag

Link to post
Share on other sites

My 6 iron speed is about 95 and my driver speed is about 115. I actually went with the stiff plus flex because i seemed to have enjoyed the stiff flex demo so much. The tip stability was actually really, really surprising to me. I figured the stiff flex demo was going to be all over the planet and it wasn't at all. With my S+ Ctapers in the MP68s, although it doesn't necessarily feel like it in the moment, they take "work" to produce. These Obans are so easy and smooth, my swing requires significantly less effort it seems. The ball flight is quite high, but the ball holds its line extremely well. I'm excited to keep messing with them.

Titleist TSi2 10, Fujikura Ventus Blue Velocore 6X, 45"

Titleist TSi2 16.5, Fujikura Ventus Red Velocore 7X, 43"

TaylorMade GAPR Mid 4, KBS

Titleist T100S, KBS C-Taper S+ 5-PW

Titleist SM8, 50F, 54S, 60D, TT S400 Custom 

Scotty Cameron Phantom X12, 35", Stability Tour


[url="https://www.instagram.com/dnice262626/"]https://www.instagram.com/dnice262626/[/url]

Link to post
Share on other sites

Just got the official email from Oban on pricing. They will be $75 each.

 

 

That's... a lot.

 

I love the oban kiyoshi white and purple, but I can't imagine spending $75 on a single steel shaft. I can get a full set of used KBS Tour shafts for that kind of money.

 

Maybe the actual price will be less? Maybe they will work with companies to make it a cheaper option when you buy new?

 

That is . . . nuts.

Link to post
Share on other sites

Just got the official email from Oban on pricing. They will be $75 each.

 

 

That's... a lot.

 

I love the oban kiyoshi white and purple, but I can't imagine spending $75 on a single steel shaft. I can get a full set of used KBS Tour shafts for that kind of money.

 

Maybe the actual price will be less? Maybe they will work with companies to make it a cheaper option when you buy new?

 

That is . . . nuts.

 

I paid that, installed. I figure that is fairly close to what any shaft runs installed.

Titleist TSi2 10, Fujikura Ventus Blue Velocore 6X, 45"

Titleist TSi2 16.5, Fujikura Ventus Red Velocore 7X, 43"

TaylorMade GAPR Mid 4, KBS

Titleist T100S, KBS C-Taper S+ 5-PW

Titleist SM8, 50F, 54S, 60D, TT S400 Custom 

Scotty Cameron Phantom X12, 35", Stability Tour


[url="https://www.instagram.com/dnice262626/"]https://www.instagram.com/dnice262626/[/url]

Link to post
Share on other sites

Just got the official email from Oban on pricing. They will be $75 each.

 

 

That's... a lot.

 

I love the oban kiyoshi white and purple, but I can't imagine spending $75 on a single steel shaft. I can get a full set of used KBS Tour shafts for that kind of money.

 

Maybe the actual price will be less? Maybe they will work with companies to make it a cheaper option when you buy new?

 

That is . . . nuts.

 

I paid that, installed. I figure that is fairly close to what any shaft runs installed.

 

I don't know where you get your shafts installed but a Modus3 125 costs ~$50 installed by me (~$40 for shaft, $10 for installation). That's about as high as it gets for me. Even a SteelFiber doesn't cost $75.

M6  9°  Fujikura Ventus 6
TS2  15°  GD Tour AD VR-7
790UDI  PX Catalyst 80  //  818H2  19°  GD Tour AD IZ-85
0311T  4i / Z745  5-9  Nippon 950GH 
SM7 46F 52F 58D  DG 115
SM7 62M  KBS Tour
putter, KBS CT Tour, Pro Only *
(¬¬)

Link to post
Share on other sites

I'm sure i paid a bit more than typical, but I'm fine with it given the service level i receive.

Titleist TSi2 10, Fujikura Ventus Blue Velocore 6X, 45"

Titleist TSi2 16.5, Fujikura Ventus Red Velocore 7X, 43"

TaylorMade GAPR Mid 4, KBS

Titleist T100S, KBS C-Taper S+ 5-PW

Titleist SM8, 50F, 54S, 60D, TT S400 Custom 

Scotty Cameron Phantom X12, 35", Stability Tour


[url="https://www.instagram.com/dnice262626/"]https://www.instagram.com/dnice262626/[/url]

Link to post
Share on other sites

Played my first full round yesterday with these. I wasn't swinging well in general and it was quite windy, but I will say that these shafts are really nice. The thing I like about them most so far is how I'm able to flight them quite easily. Yesterday I hit a low 9 iron into a back pin to about 10 feet, which wasn't necessarily spectacular, but the flight of the ball was great. The shafts seem very consistent and smooth. Compared to my CTapers, they are very easy to manage and require generally less total effort to get to perform. They also appear to be fairly long in distance.

Titleist TSi2 10, Fujikura Ventus Blue Velocore 6X, 45"

Titleist TSi2 16.5, Fujikura Ventus Red Velocore 7X, 43"

TaylorMade GAPR Mid 4, KBS

Titleist T100S, KBS C-Taper S+ 5-PW

Titleist SM8, 50F, 54S, 60D, TT S400 Custom 

Scotty Cameron Phantom X12, 35", Stability Tour


[url="https://www.instagram.com/dnice262626/"]https://www.instagram.com/dnice262626/[/url]

Link to post
Share on other sites

Played my first full round yesterday with these. I wasn't swinging well in general and it was quite windy, but I will say that these shafts are really nice. The thing I like about them most so far is how I'm able to flight them quite easily. Yesterday I hit a low 9 iron into a back pin to about 10 feet, which wasn't necessarily spectacular, but the flight of the ball was great. The shafts seem very consistent and smooth. Compared to my CTapers, they are very easy to manage and require generally less total effort to get to perform. They also appear to be fairly long in distance.

DNICe that is a killer set up! How are you liking the new grips...what did you change from? As a long time CTaper player I've had my eyes on these Obans for a little while to try. Curious about weight on the S and S+? Edit...115 grams. Looked it up.

Link to post
Share on other sites

Played my first full round yesterday with these. I wasn't swinging well in general and it was quite windy, but I will say that these shafts are really nice. The thing I like about them most so far is how I'm able to flight them quite easily. Yesterday I hit a low 9 iron into a back pin to about 10 feet, which wasn't necessarily spectacular, but the flight of the ball was great. The shafts seem very consistent and smooth. Compared to my CTapers, they are very easy to manage and require generally less total effort to get to perform. They also appear to be fairly long in distance.

DNICe that is a killer set up! How are you liking the new grips...what did you change from? As a long time CTaper player I've had my eyes on these Obans for a little while to try. Curious about weight on the S and S+? Edit...115 grams. Looked it up.

 

I got the S+ Obans. Yes, 115 constant weight. They do flight the ball quite high but they also hold their line exceptionally well. I actually had my lofts strengthened one degree just to help bring the launch down a touch. I didn't bend them more because I didn't want the heads to show more offset. I have my 36 hole CC final this weekend and I'm fairly confident that the 9- 5 iron are coming with. Don't think I'll bring the wedge, only because i'm not super comfortable with the Mp5 head yet.

 

The new Lamkin grips are really pretty nice. I've used the Zcords for a while now and honestly, i like the new Lamkins. I must be partial to "Z" grips or something. At the start i wasn't so sure about the Lamkins, as the lower hand feel is softer than I'm used to.

Titleist TSi2 10, Fujikura Ventus Blue Velocore 6X, 45"

Titleist TSi2 16.5, Fujikura Ventus Red Velocore 7X, 43"

TaylorMade GAPR Mid 4, KBS

Titleist T100S, KBS C-Taper S+ 5-PW

Titleist SM8, 50F, 54S, 60D, TT S400 Custom 

Scotty Cameron Phantom X12, 35", Stability Tour


[url="https://www.instagram.com/dnice262626/"]https://www.instagram.com/dnice262626/[/url]

Link to post
Share on other sites
  • 1 month later...

I didn't even know these existed when I got fit for my irons but man am I glad they put me in them! During my fitting, there was a distinct difference when I hit a ball with the Oban in comparison to the other shafts I was hitting.

 

I tested the X Seven, DGTI X100, KBS C-Taper 130x, and the Oban CT-115. The peak height was very similar with them all. Spin was lowest with Oban. Ball speed was highest with Oban. I was coming from Miura Small Blades with Accra 110i shafts.

 

I had 2 requirements. I wanted to go back to steel shafts and more forgiveness. I originally went in for PXG 0311T but the #'s on the Oban shafts allowed me to fit into the 0311 (set at 0311T lofts) without fear of sky balls and shots spinning off the map. (I'm a high ball hitter regardless but some spinners go into orbit.)

 

I've only played about 27 holes so far with them but as much as I love my PXG irons and the way they feel, I give a lot of credit to the Obans. I don't quite understand the way they are built but I'm not going to argue the tech behind it. If you get a chance, you have to give them a try.

[url="http://www.instagram.com/bryangolf"]Follow me on Instagram -->[/url] [url="http://www.instagram.com/bryangolf"]@bryangolf[/url]

TaylorMade M2 9.5* w/Project X HZRDUS T1100 75g 6.5
[color=#282828][font=helvetica, arial, sans-serif]TaylorMade M2 18* w/Graphite Design AD-DI 8X[/font][/color]
[color=#282828][font=helvetica, arial, sans-serif]TaylorMade UDI 3 Iron w/Project X HZRDUS Black 105g 6.5[/font][/color]
[color=#282828][font=helvetica, arial, sans-serif]TaylorMade P770 4 Iron, P750 5-PW w/True Temper DGTI X100[/font][/color]
[color=#282828][font=helvetica, arial, sans-serif]PXG 0311 54[/font][/color]* [color=#282828][font=helvetica, arial, sans-serif]w/DGTI S400[/font][/color]
[font=helvetica, arial, sans-serif][color=#282828]​Titleist Vokey SM6 60* M Grind w/DGTI S400[/color][/font]
[color=#282828][font=helvetica, arial, sans-serif]TaylorMade Spider Tour Red[/font][/color]

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Our picks

    • 2021 Arnold Palmer Invitational presented by MasterCard @ Bay Hill - Discussion & links
      John Augenstein WITB - 2021 Arnold Palmer Invitational
      Jason Dufner testing a new Cobra 3D printed putter - 2021 Arnold Palmer invitational
      Rickie Fowler clubs - 2021 Arnold Palmer Invitational
      Cameron T-11.5 putters - 2021 Arnold Palmer Invitational
      New LA Golf driver & putter shafts - 2021 Arnold Palmer Invitational
      Justin Rose - Axis putters - 2021 Arnold Palmer Invitational
      New UST Mamiya Dart iron shaft - 2021 Arnold Palmer Invitational
       

       
      2021 Arnold Palmer Invitational - Tuesday #1
      2021 Arnold Palmer Invitational - Tuesday #2
      2021 Arnold Palmer Invitational - Tuesday #3
      2021 Arnold Palmer Invitational - Tuesday #4
      2021 Arnold Palmer Invitational - Tuesday #5
      2021 Arnold Palmer Invitational - Tuesday #6
      2021 Arnold Palmer Invitational - Tuesday #7
      2021 Arnold Palmer Invitational - Tuesday #8
      2021 Arnold Palmer Invitational - Tuesday #9
      2021 Arnold Palmer Invitational - Tuesday #10
       

       
       
      • 13 replies
    • 2021 WGC Workday Championship @ The Concession Photos- Links & Discussion (UpDaTeD)
      Please post any questions or comments here.
       
      Links...
       
      2021 WGC Workday Championship - Tuesday #1
      2021 WGC Workday Championship - Tuesday #2
      2021 WGC Workday Championship - Tuesday #3
      2021 WGC Workday Championship - Tuesday #4
      2021 WGC Workday Championship - Tuesday #5
      2021 WGC Workday Championship - Tuesday #6
      Cameron Smith's Cameron 11.5 putter - 2021 WGC Workday Championship
      Cameron putter 2021 WGC Workday Championship
      2021 Ping putters - 2021 WGC Workday Championship
      Rory wearing new Nike Tour Victory II shoes - 2021 WGC Workday Championship
      Odyssey putters - 2021 WGC Workday Championship
       
      • 66 replies
    • 2021 AT&T Pebble Beach - discussion
      2021 AT&T Pebble Beach - Tuesday #1
      2021 AT&T Pebble Beach - Tuesday #2
       
      2021 AT&T Pebble Beach - Tuesday #3
       
      2021 AT&T Pebble Beach - Tuesday #4
       
      2021 AT&T Pebble Beach - Tuesday #5
       
      2021 AT&T Pebble Beach - Tuesday #6
       
      2021 AT&T Pebble Beach - Tuesday #7
       
      2021 AT&T Pebble Beach - Tuesday #8
       
      2021 AT&T Pebble Beach - Tuesday #9

      Ryan Moore with Axis 1 putter @ 2021 AT&T PB
       
       
       
      Please post any questions and comments here
      • 59 replies
    • 2021 Waste Management Phoenix Open - Discussion
      General galleries
      2021 Waste Management Phoenix Open - Tuesday #1
      2021 Waste Management Phoenix Open - Tuesday #2
      2021 Waste Management Phoenix Open - Tuesday #3
      2021 Waste Management Phoenix Open - Tuesday #4
      Monday Qualifier for Waste Management Open 
      Special galleries
       
      Ping PLD putters - 2021 WMPO Scott Brown with MMT graphite shafts in his ProTo Concept irons - 2021 WMPO TaylorMade putter cover from 2021 Waste Management Phoenix Open New Srixon golf balls - 2021 WMPO Bettinardi putters & cover - 2021 Waste Management Phoenix Open Cameron putters -2021 Waste Management Phoenix Open Piretti putters -2021 Waste Management Phoenix Open Cameron mallets - 2021 WMPO Odyssey 2-ball Ten - 2021 WMPO  
      Please put any questions or comments here
       
      Jason Day's Bag...
        • Like
      • 21 replies
    • 2021 FARMERS WITB & Equipment Photos- Links and comments
      We are back on the ground at the 2021 Farmers PGA Tour event. Please add you comments in this thread. Here are links to all the galleries:
       
      Special galleries:
      2021 Farmers - Tuesday #1
      2021 Farmers - Tuesday #2
      2021 Farmers - Tuesday #3
      2021 Farmers - Tuesday #4
      2021 Farmers - Tuesday #5
       
      2021 Farmers - Tuesday #6
       
      2021 Farmers - Tuesday #7
       
      Cameron putters - Farmers 2021
       
      Odyssey 2-ball Ten - Farmers 2021
       
      Project X Even Flow RipTide MX & LX proto shafts - Framers 2021
       
      TaylorMade putter cover for Torrey Pines - Farmers 2021
       
      Sling Shot training aid - Farmers 2021
       
       
      • 47 replies

×
×
  • Create New...