APPLY: The TaylorMade Forged Experience! August 29-31. 6 Members Wanted! Apply here!

[TaylorMade47]

Current USGA handicap

11.5

 

What are your current irons and shafts

Currently playing TaylorMade M2 Tour with KBS Tour 105 C-Taper Stiff Shafts. Irons are 2* Flat, standard loft and length.

 

Were you fit for your current irons? If so, where / when?

I was fit 11 months ago at Chris Cote's Golf. I was fit to the above specifications.

 

State why you'd want to attend this exclusive opportunity to be fit at TaylorMade Golf

I would be absolutely ecstatic to be chosen for this opportunity. I follow and post all things TaylorMade on twitter and would be a great cheerleader for the brand on social media platforms. I spend most of my day on multiple golf forums talking all things golf and equipment. If I were give the opportunity to travel to The Kingdom, AKA Heaven, I would gladly test any and all equipment, learn all I can from the tour experts, and post all of my reviews, experiences, and gained knowledge on all golf forums, and social media platforms to get the information out to those who want learn all about the brand, the experience, and the products. My current 99% TaylorMade set up is in my signature.

 

Thanks again for this amazing chance to enter for this. I am thrilled to put my hat into the ring.

[1puttpar]

 

 

TaylorMade Golf launched the P750 and P770 forged Irons earlier this year and our GolfWRX team spotted P790 long irons being tested on Tour recently, as well as DJ teasing us with some new P730 forged irons. Could these last two models round out the 2017 TaylorMade P700 forged Iron family?

 

TaylorMade wants to invite 6 GolfWRX forum members for an all-inclusive trip to The Kingdom in California to participate in the TaylorMade Forged Experience. Want to attend? Read how to apply below.

 

WHAT IS INCLUDED

• Dates: August 29, 30 & 31.
  
• All-expenses paid trip to The Kingdom, TaylorMade Headquarters in Carlsbad, CA
  
• TaylorMade Forged Iron fitting at The Kingdom, TaylorMade’s exclusive on-site fitting facility.
  
• In-depth product discussion with TaylorMade marketing and R&D staff
  
• Golf outing with TaylorMade and GolfWRX teams in Carlsbad area
  
• Of course, a few surprises along the way!
  

Complete details and how to enter below.

 

THE EVENT:

From August 29-31, TaylorMade invites 6 members of the GolfWRX community on an exclusive, all access trip to global headquarters in Carlsbad, California.

 

On this trip you'll test new and prototype product, experience an iron fitting with the club specialists that fit TaylorMade's Tour Pros, participate in an R&D discussion, play golf with TaylorMade’s marketing team and be immersed in how and why TaylorMade has become the #1 club manufacturer in golf.

 

DATES: August 29, 30 & 31, 2017

 

PARTICIPANTS: 6 GolfWRX Community Members

 

TO APPLY YOU MUST BE:

• A GolfWRX member in good standing from the US
  
• Ready and willing to post reviews / updates from your experience
  
• In a post below, answer the following:
  
  • ​Current USGA handicap
    
  • What are your current irons and shafts (be specific)
    
  • Were you fit for your current irons? If so, where / when?
    
  • State why you'd want to attend this exclusive opportunity to be fit at TaylorMade Golf
    

Note: you'll be expected to contribute to a live and ongoing TaylorMade Forged Experience thread on GolfWRX and on social media as well.

 

HOW PARTICIPANTS ARE SELECTED: GolfWRX will evaluate the posts of applicants submitted by the deadline of EOD August 15, 2017. Invitations are sent via GolfWRX message system. If any participant does not confirm within 12 hours of being notified, they will be replaced.

 

Current index 18.0

Current irons Mizuno EZ Forged/Orochi graphite shafts

I was purportedly fit by a Mizuno rep at a demo day. Nothing more than wtf measurement and a few balls off a lie board.

I'd like this opportunity to go a through a truly professional fitting. I'm pretty sure what I experienced was not what a real fitting is like. Before I get too old to play, I'd really like to remove as many variables as possible to optimize my game.

[Skeeterfire]

​-Current USGA handicap: 8.2

-What are your current irons and shafts (be specific): Mizuno MP59 project X 5.5

-Were you fit for your current irons? If so, where / when?: yes, golf shop in Hinsdale? , IL

State why you'd want to attend this exclusive opportunity to be fit at TaylorMade Golf: it'd be an amazing experience to be fully fit, and properly fit with some great new clubs. I'm 6'7, and haven't ever really been properly fit with latest technology. Been looking at TM irons, and this would do the trick. Also looking to make strides in my game, was a 4 index in high school, got away from game for a while and picked it back up seriously last 4 years where I've gone from a 15 down to a 6.2 earlier this year. Driving and putting is strong, if I could get irons and wedges squared away, I could be a pretty good player. Want to see how good, and this would be a nice start to that journey.

[rk7hock16]

• ​Current USGA handicap: 9.1
  
• What are your current irons and shafts (be specific): Titleist 716 AP2 irons 5-P & 716 T-MB 4 iron with Dynamic Gold AMT S300 shafts
  
• Were you fit for your current irons? If so, where / when? I was fit for my last set of irons at the PGA Tour Superstore in Scottsdale, Arizona back in December of 2015
  
• State why you'd want to attend this exclusive opportunity to be fit at TaylorMade Golf: I am definitely intrigued by TaylorMade's lineup and just recently started playing the TP5X ball and purchased a 2016 M2 driver. I've leaned towards Titleist clubs for the last 8-10 years, but want to learn more about what TaylorMade has to offer. I'm a big fan of their marketing (as a marketer myself) and I'd cherish the opportunity to visit The Kingdom. I've never won a contest before, so I figured this was just a shot in the dark. But maybe my luck has turned!
   
  Ryan
  

[Lefty28]

• Current USGA handicap - +0.4
  
• What are your current irons and shafts (be specific) - Titleist 916 AP2 KBS C-taper Stiff shafts
  
• Were you fit for your current irons? If so, where / when? - Yes, at Kinloch Country Club in November 2015
  
• State why you'd want to attend this exclusive opportunity to be fit at TaylorMade Golf - As a left handed golfer I have always had trouble finding options when it comes to irons for lower handicaps. TaylorMade is one company that has increased its offerings for not only lefties but also for low handicap lefties in recent years, and I'd love the opportunity to work directly with Tour quality fitters to get fit into a set unlike anything I've ever played.
  

[Pach8963]

​-Current USGA handicap: 4.1

-What are your current irons and shafts (be specific): Titleist 716 AP2(4-PW) with Nippon Modus 120x

-Were you fit for your current irons? If so, where / when?: yes. I was fit at Club Champion in Plano, TX in January 2017

-State why you'd want to attend this exclusive opportunity to be fit at TaylorMade Golf: I was really interested in the new Taylormade clubs when I was fit for my current set, however the new clubs were only a prototype and not yet realeased. I have never picked up a Taylormade club and thought it didn't feel/look as good or better than anything else on the market and would love to have a chance to put their new equipment up against my current set which has me playing the best golf I've ever played despite only being able to make it out to the course once or twice every 2 weeks.

[mtex22]

• Current USGA handicap 4.9
  
• What are your current irons and shafts (be specific) SRIXON Z545/745 Combo - Kbs Tour 120 Stiff
  
• Were you fit for your current irons? If so, where / when? Never been fit
  
• State why you'd want to attend this exclusive opportunity to be fit at TaylorMade Golf Sounds like a great opportunity to demo the new line of irons and get properly fit to my swing characteristics. Taylormade has always been a leader in golf technology and it would be a great opportunity to get the full Taylormade experience.
  

[Lefty431]

Current handicap: 7.0

Irons/Shaft: Srixon z565 w/ Nippon modus 105 stiff flex

- I've never been fit for irons

- Well, I've always wanted to get a fitting at some place like club champion, or similar specialty fitter! Never have wanted to pony up the funds for it though! What a better opportunity than to be fit by the guys who fit the pro's?? Have always been in awe of these trips and would absolutely be a dream come true to experience one! Thanks for the opportunity WRX!

[Zaneshelley]

Handicap - 9

Clubs - TM Burner LCG

Fitted - No

Why - These are the only clubs I've ever owned. Parents got them for me when I was 12 years old. I always thought I could improve my game enough without the latest and greatest clubs, and every time my friends spend big money on clubs without much improvement I am happy with my Burners. But if club fitting and new technology is all it's cracked up to be then maybe it's time to see what all the fuss is about.

[st8kdinr]

Current USGA handicap: 5.4

What are your current irons and shafts: Ping iE1 with CFS stiff shafts

Were you fit for your current irons? If so, where / when? Through Golf Galaxy late last year

State why you'd want to attend this exclusive opportunity to be fit at TaylorMade Golf: Primarily i've always had some sort of TM product in my bag, usually at the top end. This season is the first in a while where I have no TM product. I've never longed for their irons in the past, but this new line definitely has the looks part down. Seeing all the past manufacturer trips through this site has shown me that the people working for these companies have a similar passion that I have for my golf game and they want to make players play better in whatever way possible. The fellow WRXer's on the trips prior have done a great job in giving us a deeper look at the fittings and how the products work. This is a cool experience that anyone will treasure and talk about in their foursomes for years to come!

[cmarchi24]

​Current USGA handicap. 7.2

What are your current irons and shafts (be specific) Titleist AP2 716 KBS Tour X

Were you fit for your current irons? If so, where / when? Yes. Golfsmith Spring 2016

State why you'd want to attend this exclusive opportunity to be fit at TaylorMade Golf

 

I'm a golf club junkie. I love reading about them, watching the reviews, seeing if there's a difference. I've never had the chance to do much more than go to a local shop to be fitted. I have always dreamed of the opportunity to go to a professional that is trained and really spend the time with me to get it right. I tell my friends when I win the lottery I'm taking them on a golf trip to California and we're all getting fitted for clubs. The whole 9 yards. I'd absolutely love this. It would be a dream come true. I can't imagine a more fulfilling golf experience!

 

Good luck guys and congrats to whoever wins. Can't wait to read all about it!

[philvh]

Current USGA:

Australian Handicap = 5

 

Current irons & shifts:

Nike VR Blades (4-P) with Dynamic Gold X100 shafts

 

Were you fit?

No I wasn't. Just tried equipment and picked something affordable.

 

Why I would want to be fit by TaylorMade?

I'll answer with a question...why not? One of the elite and most innovate and influential golf companies wants to fit me for amazing looking and performing clubs. Honestly this a golf nut's dream! I get to try new equipment and learn some things about my swing!

 

[RSinSG]

Thanks for a great giveaway.

• ​Current USGA handicap - 7.1
  
• What are your current irons and shafts (be specific) - Ping G30 with TFC 419 graphite stiff shafts, 2* flat
  
• Were you fit for your current irons? If so, where / when? - Yes by a Ping rep at Cathedral Canyon CC in 2014 or so
  
• State why you'd want to attend this exclusive opportunity to be fit at TaylorMade Golf - This sounds like a great experience. When I retired my buddies gave me a set of TM Burner 2.0 irons with R9 woods. I wasn't fitted for the clubs and they got them in R flex. I used them for a year or so and then moved on to some stiff forged Mizunos and finally the Pings. My buddy is currently playing the M1 TM Irons and let me hit them last time we played and I was thinking I could be interested in looking into TM's again. This would be a great chance to check out the latest offerings. (I'd be a cheap date too. I'm making a trip to SoCal to visit grandkids and could coordinate the dates to avoid travel expenses.) :D
  

[bonescu]

3.2

PXG 0311T with KBS C taper 120 X to Titleist Specs 1* up 1/2" over

Indirectly went through Titleist fitting and had PXG to those specs.

Opportunity to experience the Kingdom fitting experience, share with other GolfWRX members that journey and feel like for two days a top 10 player I. The world.

 

Thx for offering the opportunity

[Stephen1125]

​Current USGA handicap:

14

 

What are your current irons and shafts (be specific)

Nike VR Forged Pro Combo Tru Temper DG Pro S300 extended 1.5"

 

Were you fit for your current irons? If so, where / when?

I was fit for length/lie only on my previous iron set. This was done at Greater Golf in Binghamton, NY in 2015. I extended my Nikes to the same +1.5" myself and I have not adjusted the lie angle.

 

State why you'd want to attend this exclusive opportunity to be fit at TaylorMade Golf.

 

I absolutely love golf. I love to tinker with my clubs and I am fascinated by the fitting/club making process. I have often contemplated a career in golf. Since my fitting 2 years ago my handicap has dropped from a 22 to a 14. I know I can improve more and that my swing is drastically better. I can't help but wonder if my fitting specs will have changed as well. It's my opinion that Taylormade has put out the BEST equipment as of late. My 2016 M1 puts every other driver to shame! I recently had a driver fitting and nothing could beat my M1! I moved to a X-stiff from a stiff, gained yards and tightened dispersion! I would love to have an iron fitting to see what improvements can by made over my current set.

I'm 6'7" tall and I always get different results when I ask local fitters and club pros about what I should be playing. It ranges from standard length to 1/2" over to 2" over. I would love the opportunity to have the best fitters in the world evaluate my swing and show me how good I can be when fitted by the best people with the best equipment! Also, I'm east coast born and raised. As long as I can remember I've dreamed of visiting California! My wife has been twice now and I've never been! California Dreaming!!! Thank you all so much for this opportunity! Fingers crossed!!

[craigcse]

8.6 which is the lowest

 

Titleist 716 mb with Nippon modus 120 x stiff shaft golf pride g2

 

I'm an equipment junkie and play with feel I've had TT , KBS c taper and tour Project x 6.5 and the Xi I finally found what too stiff of a shaft is and can live to tell about it

 

If been fitted by the GOLF lab and titleist fitting van

 

Fitters usually fit me to soft and want to put me in a stiff but I find that I like a xstiff and know I can't handle or like the feel of even step up once with these shafts

 

I would love to tell how it would be for and average good player to go through a PRO fitting

 

It would be great because on sept 5 go to Hawaii for a vacation and I can tell you how the new irons work in a tropical paradise

[jchaywood]

​Current USGA handicap: 7.4

 

What are your current irons and shafts? Nike Vapor Pro Combo, DG Pro S300

 

Were you fit for your current irons? If so, where / when? I was not.

 

State why you'd want to attend this exclusive opportunity to be fit at TaylorMade Golf: I've never been actually fitted for any of my clubs, let alone by the same guys that fit top tour pros. I'm a fan of Taylormade's metalwoods, but their irons have never really stood out to me. However, the P700 series are drool-worthy and I would be extremely exited and honored to test them out! Additionally, I've followed all of the threads where other lucky WRX members have been invited on similar trips, and they seem like an absolutely amazing time.

 

Thanks for the opportunity!

[Jwowzer]

​Current USGA handicap: 9.1

 

What are your current irons and shafts (be specific): Titleist 716 AP2 with KBS Tour 130.

 

Were you fit for your current irons? If so, where / when?: Yes, Through Titleist sales rep back in February.

 

State why you'd want to attend this exclusive opportunity to be fit at TaylorMade Golf: I'd like to attend because l have tested out the new line through Taylormade and am very impressed. Unfortunately, since making the switch to Titleist AP2's, my handicap has jumped up 5 points. Whether it's the shafts, the heads, or a combination of both, it's taking a toll on my scores and resulting in frustration when golfing. The irons I used before the AP2's were 2012 Tour Preferred CB's, which I loved.

[wigwam]

• ​Current USGA handicap -Surely somewhere north of 14.
  
• What are your current irons and shafts (be specific) - Mizuno MP-H4 with KBS C-Taper Lite - 120S
  
• Were you fit for your current irons? If so, where / when? Never been fit for any club before.
  
• State why you'd want to attend this exclusive opportunity to be fit at TaylorMade Golf - Honestly, I'm not that good at golf at all, and maybe, getting fitted for clubs that are surely way above my skill level would make me slightly better. Even if there were no improvement to my game whatsoever, any social media followup would give below average players someone to empathize with.
  

[MattOstby]

 

 

TaylorMade Golf launched the P750 and P770 forged Irons earlier this year and our GolfWRX team spotted P790 long irons being tested on Tour recently, as well as DJ teasing us with some new P730 forged irons. Could these last two models round out the 2017 TaylorMade P700 forged Iron family?

 

TaylorMade wants to invite 6 GolfWRX forum members for an all-inclusive trip to The Kingdom in California to participate in the TaylorMade Forged Experience. Want to attend? Read how to apply below.

 

WHAT IS INCLUDED

• Dates: August 29, 30 & 31.
  
• All-expenses paid trip to The Kingdom, TaylorMade Headquarters in Carlsbad, CA
  
• TaylorMade Forged Iron fitting at The Kingdom, TaylorMade’s exclusive on-site fitting facility.
  
• In-depth product discussion with TaylorMade marketing and R&D staff
  
• Golf outing with TaylorMade and GolfWRX teams in Carlsbad area
  
• Of course, a few surprises along the way!
  

Complete details and how to enter below.

 

THE EVENT:

From August 29-31, TaylorMade invites 6 members of the GolfWRX community on an exclusive, all access trip to global headquarters in Carlsbad, California.

 

On this trip you'll test new and prototype product, experience an iron fitting with the club specialists that fit TaylorMade's Tour Pros, participate in an R&D discussion, play golf with TaylorMade’s marketing team and be immersed in how and why TaylorMade has become the #1 club manufacturer in golf.

 

DATES: August 29, 30 & 31, 2017

 

PARTICIPANTS: 6 GolfWRX Community Members

 

TO APPLY YOU MUST BE:

• A GolfWRX member in good standing from the US
  
• Ready and willing to post reviews / updates from your experience
  
• In a post below, answer the following:
  
  • ​Current USGA handicap
    
  • What are your current irons and shafts (be specific)
    
  • Were you fit for your current irons? If so, where / when?
    
  • State why you'd want to attend this exclusive opportunity to be fit at TaylorMade Golf
    

Note: you'll be expected to contribute to a live and ongoing TaylorMade Forged Experience thread on GolfWRX and on social media as well.

 

HOW PARTICIPANTS ARE SELECTED: GolfWRX will evaluate the posts of applicants submitted by the deadline of EOD August 15, 2017. Invitations are sent via GolfWRX message system. If any participant does not confirm within 12 hours of being notified, they will be replaced.

[MattOstby]

​Current USGA handicap: +1.8

 

What are your current irons and shafts (be specific): UDI 2 iron(KBS Tour X 3 iron shaft) Tour Preferred MC 4&5 Iron (KBS Tour X) Tour Preferred MB 6-PW (KBS Tour X)

 

Were you fit for your current irons? Nope, hit them at a Taylor made Demo Day. Pieced togather the current set little by little with trial and error.

 

State why you'd want to attend this exclusive opportunity to be fit at TaylorMade Golf: I've always loved TaylorMade equipment and after a recent wedge and putter fitting I currently am Taylormade throughout my entire bag. I've been looking at getting a new iron set and was really interested in the new line that came out. I've never been fit for an iron set, but I've gone through the fitting process before and really enjoyed it. Plus I would totally blast my experience on every social media outlet I could. I love Taylormade and this would be a dream come true.

[LafertyDaniel]

Current USGA Handicap: +1.8

Current Irons: Ping i200 4-PW, KBS Tour X (+1/2"), D5 throughout set

Fit for Current Irons: Fit by friend (Ping Rep) with Trackman in May

I'd like to attend this opportunity because I have been a Loyal Ping user because I feel their equipment performs incredibly well, but I would be more than willing to be proven wrong by Taylormade Golf.

 

Thanks for the opportunity!

[mgregory2624]

Current USGA handicap - 3.1

 

What are your current irons and shafts (be specific) - Srixon z945, True Temper TI DG x100

 

Were you fit for your current irons? If so, where / when? - fitted for shafts like 10 years ago w/ Mizuno Shaft Optimizer, irons themselves have been self-fitted through demo days and trial-and-error on the range

 

State why you'd want to attend this exclusive opportunity to be fit at TaylorMade Golf - the M1/M2 line of woods/hybrids has really turned my game around. Would love to see what a properly fit set of irons could do. Also, I'm a tech geek; and am really interested in the engineering/design side of what TM does.

[Kingcat990]

USGA: 13 and some change

 

Irons: Masda Fast Blades 4-PW Nippon Modus 120s D3SW

 

Fit: No. Never.

 

Why should I be there?: I work 6-7 days a week year round. I need this. I also haven't gamed a set of Taylormade irons in over a decade let alone sample them. Always wanted to try a set but at the time when I was living in Wyoming, they were harder to come by.

[golfnut07]

• ​Current USGA Handicap +1
  
• Current irons - Titleist 716 MB/CB combo 4-P with PX 6.5 2* Upright
  
• I was fit into these at the Titleist Performance Institute in Oceanside
  
• I would love the opportunity to be fit at the Kingdom in Carlsbad! When I was fit for my current irons I thought it was the coolest experience ever. However with the swing changes I have made, I feel that getting fit into a set of P730's would greatly benefit my game :) Thanks alot to Golf WRX and Taylormade for the opportunity!
  

[Scratch2Plus]

​Current USGA handicap...2.9

What are your current irons and shafts (be specific)

Titleist VG3 w~ Nippon Modus 130s

Were you fit for your current irons? Yes If so, where / when? 2 seasons ago at Club champion

State why you'd want to attend this exclusive opportunity to be fit at TaylorMade Golf

Tremendous opportunity to get a full Kingdom fitting.

Currently playing the 2017 M2 driver and M2 HL fairway and absolutely love them.

It would be a dream come true to get fitted for TM irons at THE KINGDOM to compliment the woods.

[Ray Jackson]

Current USGA handicap - 1.5 index

What are your current irons and shafts (be specific) - Taylormade RSi TP 5-PW, Taylormade RSI TP UDi 4 iron, all with Steelfiber i95 stiff

Were you fit for your current irons? If so, where / when? No.

State why you'd want to attend this exclusive opportunity to be fit at TaylorMade Golf. Love TM irons, previously in R9bs, prior to that RSi 2s, but never fitted, off the rack or 'self fitted'. Also using 2016 M2 10.5*, aeroburner TP 16.5* and 2016 M2 5 HL fairway and XFT wedges. Would love to be fitted properly into a combo set of 770/750 irons to get the best out of my swing re apex, descent angle and spin rates.

[Wdwfreak]

• ​Current USGA handicap - 0.5
  

• What are your current irons and shafts (be specific) Ping i200 w/ Nippon Modus 130x
  
• Were you fit for your current irons? If so, where / when? Cool Clubs Chicago in late May 2017
  
• State why you'd want to attend this exclusive opportunity to be fit at TaylorMade Golf I find the fitting process to be fascinating and hearing about an incredible opportunity to experience something like this at the Kingdom is honestly a dream come true. As a aspiring golfer fresh out of college with not necessarily the most money its really great to hear about something like this, and it'd be an honor to attend and hopefully use it to improve my golf game!
  

[hoselfader]

Not sure if I qualify. I'm from Canada but have a home in the US that I spend 6 months at.

• ​Current USGA handicap - 5.6
  
• What are your current irons and shafts (be specific) - Taylor Made Tour Preferred CB with KBS Tour shafts, S Flex
  
• Were you fit for your current irons? If so, where / when? - Was fit at GolfTown in Halifax NS in 2015.
  
• State why you'd want to attend this exclusive opportunity to be fit at TaylorMade Golf - I have played TaylorMade irons for the past 8 years, starting with R9 TP and then going to the Tour Preferred CB. I was previously playing Mizuno MP 37 blades and since making the switch to Taylor Made have improved my scoring greatly. The forgiveness on less than perfect contact is amazing, but they still have a wonderful feel and ability to work the ball. I would love the opportunity to try the new Taylor Made irons and especially have the experience of being fit by the best in the business.
  

[Go_Blue!]

-HC- 5.2

-Irons and shafts- Srixon Z745 e/ TTDG X100

-Fit at Miles of Golf in Ann Arbor, MI

- Why do I want to go?

 

Well, it's pretty simple...this is a once in lifetime opportunity. Golf has meant so much to me, and continues to mean even more the older I get. I am currently playing M1 Driver and 3W, which I was fit for as well, and a Spider Tour putter. This summer my 2016 M1 Driver was cracking on the crown so I called TM customer service and was treated like I was their most important customer. I was leaving for a golf trip the folloiwing wknd and was assured that a replacement head would be sent out in time, well it was 5 days later and still nothing. I called TM back Fri morning and the same woman I dealt with earlier answered again and remembered me. She was so sorry and completely understood the urgency I was in. Something happened when she processed my previous order and actually put me on hold this time to walk down to shipping to see if they could still make that days cutoff to ship out (this was close to 330ish CA time). She said it was gonna be tight but gave me her word that she would try everything to get a new order going and walk it down herself to try to make the deadline to have the club overnighted to me in time for me to get it b4 I left for my trip. The next day, Sat, around 5pm I got a knock on my door from I believe FedEx with my driver. I was stunned.

 

That was the best customer service experience I have ever had in my life. She never questioned anything, and made me feel like I was the single most important TM customer. That is the kind of stuff that goes a long way with me. TM will always be in my bag bc of this and I still am extremely grateful for everything she did.

 

It would be a dream to participate in this opportunity, and I would love to provide my review of this experience and these irons. And I would love to try to personally thank the woman that I dealt with earlier this summer.