APPLY: Fujikura Evo IV Fitting at Club Champion! 5 Members Wanted! Apply Here!

[PixlPutterman]

Current Driver & Shaft Details (Manufacturer, Model, Settings, Length, Flex)

 

SLDR IN 8.5 ATTAS 5GOGO 6S AT 45 INCHES

 

Driver Swing Speed

 

110

 

What are your goals to improve your driving?

 

BE MORE CONSISTENT WITH MY LAUNCH ANGLE

 

Have you ever been custom fit before?

 

NOT FOR A DRIVER

 

Indicate the Club Champion location you'd visit for the fitting (Search here for your nearest Club Champion location)

 

SEATTLE OR ST LOUIS

[ryanandrew_golf]

-Ping G400 LST 8.5*, std setting, fujikura Atmos black ts 7 X, 45"

-117 mph

-longer carry, tighter dispersion

-yes

-Dallas, TX

[jtotto83]

Current Club: 2016 M2 with Oban Kiyoshi White 75 05

Club Speed: 115-118

Custom Fit: Yes

Goals: tighten dispersion in 2018

Club Champion: Plano, TX location

[PeteW]

• Current Driver & Shaft Details (Manufacturer, Model, Settings, Length, Flex): Cobra Fly Z+, 9.5*, Speeder 661 Stiff
  
• Driver Swing Speed 105ish
  
• What are your goals to improve your driving? More penetrating flight hopefully increasing roll
  
• Have you ever been custom fit before? For irons
  
• Indicate the Club Champion location you'd visit for the fitting Cleveland
  

[Scooterboy59]

Epic 9 deg. set at +1/n Fujikura Motore Speeder 6.2 Tour Spec x-stiff 45 inchs

Swing speed = 108 + or -

More carry

Custom fit

Charlotte, NC

[tigercolt77]

- epic w/ Tensei Orange v2 60s 44.5”

- 108

- consistency/distance

- yes I was fit for my current driver

- Acworth, ga

[TPG1971]

• Current Driver & Shaft Details (PING G30, 10.5, 45.5 S PING Tour65)
  
• Driver Swing Speed 98
  
• What are your goals to improve your driving? I would love to eliminate my left miss, and launch the ball in the medium range, and of course improve my accuracy. Finding some more clubhead speed would not hurt either.
  
• Have you ever been custom fit before? Yes
  
• Indicate the Club Champion location you'd visit for the fitting. Boston Ma
  

[Z1ggy16]

Current Driver & Shaft Details: TM 9.5* M2 with Tensei Blue 60 S

Driver Swing Speed: 100-105ish

What are your goals to improve your driving? Consistent miss, ideal launch conditions.

Have you ever been custom fit before? Not for this club, but I've been fit for irons, putter, wedges.

Location: Near the Club Champion in Hackensack, NJ

[scottaz]

• Driver- Ping G400 LST 8.5 Kuro Kage Duel Core TX 70 45" set on the small minus.
  
• SS- 115-118
  
• Goals? To maximize accuracy and distance.
  
• Have you ever been custom fit before? Not for the driver. I've always done that myself on the course/range.
  
• Philadelphia Pa.
  

Thanks!

[GolfWithdrawals]

Current Driver & Shaft Details: Callaway RAZR FIT Extreme 8.5 with Aldila Trinity 65-S

Driver Swing Speed: around 110

Goals to improve driving: I would like to gain more distance and have a more consistent ball flight

Have you ever been custom fit before?: No.

Location: Atlanta, GA

 

Thanks!

[Johnny T]

• Current Driver & Shaft Details: Taylormade 2017 M1 10.5* (front weight - 3 clicks toward draw; back weight - 2 clicks toward high) with Project X Even Flow Blue 65 6.5 - 44.25"
  
• Driver Swing Speed: 105
  
• What are your goals to improve your driving? Improve consistency (remove the two-way miss)
  
• Have you ever been custom fit before? Yes
  
• Indicate the Club Champion location you'd visit for the fitting: Washington, DC
  

[gioguy21]

• Current Driver & Shaft Details (Manufacturer, Model, Settings, Length, Flex) ---- Ping G400 10.5*; Aldila Synergy 65TX; 45.25", D3
  
• Driver Swing Speed ---- 117-120 mph
  
• What are your goals to improve your driving? ---- Accuracy, distance, consistency
  
• Have you ever been custom fit before? ----- Yes, at Club Champion (Washington, DC location)
  
• Indicate the Club Champion location you'd visit for the fitting ---- Hackensack, NJ
  

[jas904]

-Callaway XR16 SZ 9* standard settings Diamana S+ stiff, 44”, D2

-107 MPH

-I want to optimize launch and spin so I know that I’m not leaving anything on the table

-For Irons yes, not for a driver, at Club Champion

- San Francisco (Danville)

[youngwaldo]

• Current Driver & Shaft Details (Manufacturer, Model, Settings, Length, Flex) TItleist 915D4 Tensei white 60s 45"
  
• Driver Swing Speed 104
  
• What are your goals to improve your driving? HIt more fairways
  
• Have you ever been custom fit before? yes
  
• Indicate the Club Champion location you'd visit for the fitting Hackensack, NJ
  

Wk

[Divot2]

• Current Driver & Shaft Details (Manufacturer, Model, Settings, Length, Flex)
  
• 2017 Taylormade M1 460cc, 9.5*, standard TM length, stiff flex
  
• Driver Swing Speed
  
• around 110
  
• What are your goals to improve your driving?
  
• dispersion, strike location
  
• Have you ever been custom fit before?
  
• No
  
• Location to travel to
  
• Atlanta, Ga
  

[tnrts345]

• Current Driver & Shaft Details: Callaway Epic SZ 9* Project X HZRDUS Black 6.5 75g
  
• Driver Swing Speed: 120ish
  
• What are your goals to improve your driving? Accuracy
  
• Have you ever been custom fit before? Not for a Driver
  
• Location: White Plains, NY
  

[w1zk1d]

• Titleist 913D2 Aldila 9.5 Aldila α Rip 60
  
• 95mph
  
• Focusing on accuracy, consistency, not distnace
  
• Yes, for irons, not drive
  
• Hackensack, NJ
  

 

Thank you!

[Roadking_6]

• Current Driver & Shaft Details (Manufacturer, Model, Settings, Length, Flex)
  

TESTING 2 drivers Currently:

Ping G400 10* LST VA Composites Raijin Black Proto 65 (71g actual) X-Flex ~45.25" Neutral Setting Tipped 1"

Taylormade 2017 Tour Issue M2 9.7* Kuro Kage Dual Core XT - 70TX ~ 45.25" Neutral Setting Untipped

• Driver Swing Speed
  

117-120 mph

• What are your goals to improve your driving?
  

Working on Flattening out my swing plane. I tend to pull the handle a touch, get steep and the 2 way miss rears it's ugly head. I don't ever really have 'OK' driving days. Either my timing is on, and all systems are firing, or if the timing is off, I am liable to hit maybe 1 fairway (if I am smart enough to pull the 2 iron)

• Have you ever been custom fit before
  

Yes, both times on trackman outside

• Indicate the Club Champion location you'd visit for the fitting
  

Looking at the webiste, I didn't even know there was a CC in CLEVELAND, OH (edit as I look back it says coming soon). If it's open by the time of this fitting, would love to go to Cleveland. If not, Detroit is the next closest to me. Considering I have driven to Ypsilanti, MI twice for fittings, Detroit would be about the same distance from me and would be more than happy to travel for this.

[stuart374]

Callaway GBB Epic - Project X HZRDUS T800 55 Graphite, Neutral, 45.5, Regular

Swing Speed - 90 MPH

Goals - Distance and accuracy.

Yes, I have been fit.

White Plains, NY

[evoviiiyou]

• Current Driver & Shaft Details: JPX 900 with Fujikura Speeder 661 Evo II Stiff 44.5"
  
• Driver Swing Speed: 108mph
  
• What are your goals to improve your driving? Accuracy
  
• Have you ever been custom fit before? Yes
  
• Location: Cleveland Ohio
  

Thank you for this opportunity! Its awesome

[harleydavis]

2016 Taylormade M1 9.5 - Matrix Deus HD 60X

 

108-113

 

More consistent ball flight with lower spin. When I drop down to optimal spin numbers my consistency goes out the window. Playing a higher spinning set up helps with this, but I am losing out on distance.

 

Yes, but not for my current set up.

 

St. Louis, MO.

[Boricua Golf]

• Current Driver & Shaft Details: Ping G LS Tech, 10.5*, Alta 55 X Flex, 44.5", tipped 1"
  
• Driver Swing Speed: 105-108
  
• What are your goals to improve your driving? Accuracy, it is not bad but can always get better
  
• Have you ever been custom fit before? Yes
  
• Location: Washington DC
  

[jdenham15]

• Callaway Epic SZ 10.5, setting is -1 N, Graphite Design DI-7X, 45.5"
  
• Driver Swing Speed: 105
  
• What are your goals to improve your driving? Being able to work the ball both ways and a few extra yards never hurt anybody
  
• Have you ever been custom fit before? Not for a driver, only irons
  
• Indicate the Club Champion location you'd visit for the fitting: Atlanta Ga
  

[besawj983]

• Current Driver & Shaft Details-Titleist 915d3 9.5* Graphite Design AD-MT7x 44.75"
  
• Driver Swing Speed-121-124mph
  
• What are your goals to improve your driving?-consistency
  
• Have you ever been custom fit before?-no
  
• White Plains NY
  

[dlieux]

• Current Driver & Shaft Details (Manufacturer, Model, Settings, Length, Flex) == 2016 TaylorMade M2, Standard settings and length, stiff flex
  
• Driver Swing Speed == 109 mph
  
• What are your goals to improve your driving? == to hit as many fairways as possible, while achieving maximum distance out or my swing
  
• Have you ever been custom fit before? == No
  
• Indicate the Club Champion location you'd visit for the fitting == Atlanta, GA
  

[ws6]

• TaylorMade M2, 2016, 9.5 loft, 44.5 inches, Fuji 7.3 TS, stiff, tipped 1/2 inch
  
• 105
  
• optimize launch and spin to gain control and distance
  
• no
  
• Bellevue, WA
  

Thank you for the contest.

[Halos05]

 

Fujikura is offering the opportunity for 5 GolfWRX members to be properly fit for and review the Speeder Evolution IV shaft. They've partnered with Club Champion, a Golf Digest Top 100 fitting company, with their 26 locations throughout the US to ensure a proper fit. The winners of this contest will experience a top-notch driver fitting by one of Club Champion’s trained fitting experts. Important Note: If the Speeder Evolution IV is not a proper fit as determined by the club fitter, you will be properly fit into another one of Fujikura’s many offerings.

 

Want to be part of this amazing Fujikura Shaft and Club Champion Fitting and Review? Read how to apply below.

 

ABOUT THE FUJIKURA SPEEDER EVOLUTION IV

The newest in a long line of Speeders, the Speeder Evolution IV, is developed with the most advanced technologies in the graphite shaft industry. Building on the performance, engineering and material integrations of the Evo II and Evo III, the Evo IV sets the new standard. The IV is based on the profile of the II (low launch and low spin), but has a slightly softer mid to tip section to increase launch angle while maintaining low torque and spin with added high-strength materials.

 

The materials and engineering processes that make up the IV are more advanced than any Speeder that came before. New technologies include a new High-performance intermediate modulus 70-ton material, for lightweight stability and a new “Engineered Outer Bias Technology” that creates smoother loading feel. Technologies that carry over from previous Evolution shafts include MCT (Metal Composite Technology), 90 Ton Carbon Fiber for ultra-lightweight stability and Maximum Carbon Fiber Content (MCFC) pre-preg material.

 

The IV has a full-length 3D printed Black/Silver gradient cosmetic to compliment the gold decal. Available in weight ranges from 56 to 77 grams (569, 661, 757) and in flexes starting at SR (R2) up to X. $400 MSRP.

 

HOW TO APPLY

In a post below, include the following...

• Current Driver & Shaft Details (Manufacturer, Model, Settings, Length, Flex)
  
• Driver Swing Speed
  
• What are your goals to improve your driving?
  
• Have you ever been custom fit before?
  
• Indicate the Club Champion location you'd visit for the fitting (Search here for your nearest Club Champion location)
  

Testers chosen and notified via PM within 7 days. Good luck!

 

 

WHAT WE ASK

 

If chosen, we request a full review on both the fitting experience and the Fujikura shaft you are properly fit into. You will be required to participate in an Official Review Thread on GolfWRX, including observations and photos.

 

NOTE: You are responsible for transportation to and from your nearest Club Champion location.

• Current Driver & Shaft Details: 2016 Taylor Made M2, Hzrdus Black 6.5
  
• Driver Swing Speed: 105
  
• What are your goals to improve your driving? Accuracy
  
• Have you ever been custom fit before? Yes
  
• Location: Washington DC
  

[2012BFT]

• Current Driver & Shaft Details: EPIC w/ Rogue MAX 65 or G400 w/ PX HZRDUS Yellow 6.0
  
• Driver Swing Speed: 106+ average
  
• What are your goals to improve your driving? Accuracy/ Distance by Optimizing Launch and Spin as best as possible!
  
• Have you ever been custom fit before? Yes
  
• Location: Detroit, MI.
  

Thanks for the opportunity! This is something I have really been searching for lately as I am trying to optimize the best shaft combo for my G400 especially since on paper my swing speed is "on the fence" between going stiff or X-stiff. I am really interested in testing how "The IV is based on the profile of the II (low launch and low spin), but has a slightly softer mid to tip section to increase launch angle while maintaining low torque and spin with added high-strength materials."

 

Lastly, I PROMISE to be available on the forum thread to answer any questions and write a review about my entire experience.

[swizbeatz]

 

[*]Current Driver & Shaft Details (Manufacturer, Model, Settings, Length, Flex)

 

44.5” Ping G400 Xtorsion copper 70x

 

[*]Driver Swing Speed

 

105

 

[*]What are your goals to improve your driving?

 

Increase ball speed

 

[*]Have you ever been custom fit before?

 

Yes many times

 

[*]Indicate the Club Champion location you'd visit for the fitting

 

Detroit (royal oak)

[Gnomesteel]

• Callaway Epic SZ 9.5º, Veylix Rome 688 X, Neutral, 44.5"

• ~112mph

• Reduce severity of mishits. Wouldn't mind an extra yard or two either.

• Yes, but not for current driver.

• Dallas, TX