ENTER: Bettinardi The Hive Experience Giveaway! Enter here!

[DeCuchi]

https://bettinardi.com/hive-archive/bbzero-flow-tour/

 

Move the tour hex to the cavity, change it to raw carbon with forced patina or solid black. Add a sightline and a black shaft. Done!

[PapaTortuga]

Wow this would be a dream come true!

 

https://shop.bettinardi.com/mobile/inovai-30-counterbalance-putter-p85.aspx

 

I would do a solid matte black color with a black twisty neck. I would also have it engraved with my name. Simple yet elegant and simply stunning!! Thanks!

[poppman2142]

I would add a sight dot and a black leather Bettinardi putter grip. Micro honeycomb face. All black paint fill. Full shaft offset, 69* lie, 34.75" long and 2.5* loft.

 

https://bettinardi.c...-tour-kool-aid/

[HTownCPA]

BB0 Flow Neck. Have put my wife and daughter's names / initials into it.

 

Plus, I am a lifelong Liverpool FC supporter so have to work some Red into the paint fill.

[gprubes]

BBZero Flow Neck

 

I would like to have a F.I.T. Face, My sons names stamped on the rear bumpers, "B" stamp on the face, "Bee" logo and Bettinardi in the cavity, and Random stamping on the sole (including the KoolAid Man). Torched finish and colorful paint fill all around!!!

 

Thanks GolfWRX and Bettinardi...!!

[DNice26]

BBZero

 

https://bettinardi.com/hive-archive/bbzero-soft-carbon/

 

I would add a teal ribbon (Ovarian Cancer awareness) and a matching butterfly to it, in remembrance of my mother. Keep most everything else simple and clean.

 

Thank you.

[pcs11]

Awesome contest!

 

BB34 - I've been looking for the perfect one for a long time.

Material: DASS

Finish: Tour Blast

Face Milling: Fly-Mill

Stamping: Stinger bee on the heel side of face. Bettinardi on the back cavity or the honeycomb.

Blue and white paintfill.

 

Lie: standard

Length: 36"

Lamkin cord jumbo grip - blue

[MillerLowLife]

BB8 Tri Plane DASS

 

https://bettinardi.com/hive-archive/bb8-tri-plane-dass/

 

Love the torched blue finish. I would switch out the kool-aid stamping for the Windy City Wizard. Milling I would let them fit me into. I usually prefer a deep milling for soft sound but would keep an open mind. Black shaft. Black putter line on top and not paintfill on the putter line down below.

 

Awesome give away and looking forward to following along with this one.

[Craigstands17]

I would have to go with BBZero Dass (https://bettinardi.com/hive-archive/bbzero-dass/)

Sole done with a Kool-Aid face and have the Catamaran tool used on it to make it 350g

Welded twisty neck

Lime Green Paint fill

white sight dot

Initials stamped on back bumper

[NAM2212]

https://bettinardi.com/hive-archive/bbzero-soft-carbon/

 

I think I would add some hand stamping to the putter. It looks perfect as is though.

[Mitchell]

BB29 prototype soft carbon headshape in DASS with no alignment aid and neck from Windy City Wizard BB1F with 1/2 shaft offset. Microhoneycomb milling. Script Bettinardi prototype engraved in cavity with hex on toe side of sole only. Torch finish with purple/gold paintfill.

Thanks for the opportunity!

[DavePelz4]

Great opportunity and I wouldn't need to travel as my office is about a driver and 7 hybrid from their HQ.

 

Would love to try the DASS QUEEN B 6 STINGER TOUR but wouldn't customize it. Why mess with perfection?

[golfinbrad]

Awesome give away!!!! DASS FCB for me. Love the traditional look. My school colors were red, white and blue so love the stock picture. However would like the Bettinardi B on the heal or toe and my school LU on the other.

[mister2cool]

I love the BB0 Snowtime!!!! https://bettinardi.com/hive-archive/bbzero-snow-time/

I only wish it had FIT face though. I would also love to have the Stinging Bee stamp in the cavity in place of the 2nd snowflake

[IH823PUTT]

This!

 

https://bettinardi.com/hive-archive/red-rjb-stinger-bee-dass-bbzero-flow/

 

I'm Canadian, so this colour scheme is ultra cool. I love, and have gamed a BBZero! Wouldn't mind a maple leaf engraved, but wouldn't complain lol I'm also a welded flow neck kinda guy...the fact this is a rounded short pipe is even better.

 

Love your stuff Bob! Thanks so much.

[Jrolsen0425]

BBZero plumbers neck. Raw carbon with a top line sight line. Blank sole. Bettinardi script in cavity. B stamp on heel

 

What a great giveaway!!!!!

[elcgolf]

As a longtime Bettinardi fan, this would be a dream come true. My dream putter is a DASS BB8 tri sole with fit face with just my initials on the bumpers, the honey bee in the cavity, and kool aid logo on the face. In fact this one comes pretty close: https://bettinardi.com/hive-archive/bb8-tri-betti-dass/

 

[TheWalkingGolfer]

EN FUEGO TOUR DASS BBZERO

 

 

https://bettinardi.com/hive-archive/en-fuego-tour-dass-bbzero/

 

Orange and black paintfill with initials stamped on the toe.

[willie991]

Would like the Tri Dass with the bullet hole sound slot like this one....

https://bettinardi.com/hive-archive/bb8-tri-plane-dass/

 

Done with the gold torching and blue hues like this...

https://bettinardi.com/hive-archive/bb8-tri-dass/

 

Bettinardi name in the cavity and USA on each of the rockers. Stampings done in a red, white, and blue color combo.

 

36" black shaft with oversize leather grip.

 

Thanks so much to Bettinardi for the opportunity!!!!

[nwestover21]

This is awesome!

 

https://bettinardi.com/hive-archive/bettinardi-bbzero-rain-maker/

 

Love this putter, never hit one with the bullet holes on the bottom like this, but I assume it will give a similar feeling to having a sound slot cut. I even like the stampings on this one, would probably only add a personalized initials or nickname on the face near the heel, as well as using the bettinardi B instead of the RJB on the face.

 

Thanks WRX and Bettinardi!!

[RangerV]

https://bettinardi.com/hive-archive/bbzero-dass/

Love the bbzero DASS models.

This one would be all black finish and a black shaft with white and red paint fill. Letters in white and the Betti logo in red.

I am working on turning a SS16 into this color scheme right now but a custom tour department bbzero would blow that out of the water

[xdoc22]

Tour DASS MiNOVAI - https://bettinardi.com/hive-archive/tour-dass-minovai/

 

Alterations:

Finish - Black Oxide

Neck - BBzero neck (short(er) flow neck)

Back of face - Keep the "Bettinardi", but add honeycomb design around it (similar to the Tour DASS Studio Stock 3)

 

Thanks!

[Crooksc17]

I'd love the Dass Queen B 6 Black Oxide.

 

Would keep it very simple and clean. Maybe add my kid’s initials

[is76550]

https://shop.bettinardi.com/bb1f-putter-p69.aspx

 

Just the honeycomb milling. Let that baby be sleek and mysterious!

[Buckets87]

Insane giveaway. Thank you to GolfWRX and Bettinardi.

 

Tough to pick just one, but I would go with a DASS QB6 w/Super Fly Mill face. Dancing Bettinardi script stamped w/Kool Aid and Stinger logos.

 

Looking forward to seeing the winner's choice!

[D0ch0l1d4y]

Mine would be a fusion of several...but here's a link to the base model, QB6 w/ copper insert:

 

https://bettinardi.com/hive-archive/qb6-limited/

 

 

I made a graphic:

 

Carbon steel body, finished in a high-polished rainbow torch. Fancy welded neck with 1/2 shaft offset giving about a 4oclock toe hang. Killer bee sole w/ skull stamp on the fly mill face. Cavity as shown.

 

K-State purple paintfill except for the black bodies on the bees on the sole.

 

34" long, Lamkin Deep Etched Bettinardi white grip.

 

 

[jaworski]

What a fantastic opportunity ! Thanks GolfWRX and Bettinardi.

 

I just love the Soft Carbon BB8 Honeycomb putter in the Hive Archive.

 

https://bettinardi.com/hive-archive/soft-carbon-bb8-honeycomb/

 

My only option would be to have the length at 37 inches.

 

Thanks for a chance to dream about a great putter.

[PALS-SSA]

BB2 in Damascus.

Micro honeycomb on the face and back flange edge

Leave the face unetched for a solid look. Etch only the body and flanges to bring out the Damascus

DASS hosel for contrast

Bee logo on the heel

345g

PVD shaft and leather grip.

[sosob34]

Kool-Aid QB-9 DASS - https://bettinardi.com/hive-archive/kool-aid-qb9-dass/

 

As a lover of horror films, I'd like to see Jason Voorhees stalking the Kool-Aid man on the sole of the putter. Just a random hockey mask in there to let the Kool-Aid man know he is not alone. I currently play with a counter balanced putter, and would like this to be the same.

 

Great opportunity, thanks.

[cmrl1986]

https://shop.bettinardi.com/queen-b-8-putter-p74.aspx

 

QB8 carbon with a black oxide finish

-Welded plumbers neck giving it quarter toe hang

-Fly milled face

-350g

-Topline

-Random Tour Department stamping

-Dancing Bettinardi letters in the cavity.

 

Pick Me!!